FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Ubuntu > Ubuntu User

 
 
LinkBack Thread Tools
 
Old 04-22-2008, 06:34 PM
"Nicolae Ghimbovschi"
 
Default Not all partitions are detected

Hello ,

I have installed ubuntu 8.04 RC
Linux ubuntu-titan 2.6.24-16-generic #1 SMP Thu Apr 10 13:23:42 UTC
2008 i686 GNU/Linux

The problem is in that it doesn't detect all partitions.


root@ubuntu-titan:~# cat /proc/partitions
major minor #blocks name

8 0 80043264 sda
8 1 20482843 sda1
8 2 20482875 sda2
8 3 1020127 sda3
8 4 1 sda4

But when I use fdisk , it shows all the existing partitions:

root@ubuntu-titan:~# fdisk /dev/sda

The number of cylinders for this disk is set to 9964.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/sda: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0fed0fed

Device Boot Start End Blocks Id System
/dev/sda1 * 1 2550 20482843+ 7 HPFS/NTFS
/dev/sda2 2551 5100 20482875 83 Linux
/dev/sda3 5101 5227 1020127+ 82 Linux swap / Solaris
/dev/sda4 5228 9964 38049952+ 5 Extended
/dev/sda5 5228 9964 38049921 7 HPFS/NTFS

Command (m for help): q


Below is a part from dmesg listing:

...
[ 23.578223] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.578244] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 23.578249] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 23.590495] sda1 sda2 sda3 sda4 <<3>ata1.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2
[ 23.656917] ata1.00: BMDMA stat 0x24
[ 23.656929] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 23.656931] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
...

bus_type is a kernel boot parameter ?

Additional info:
root@ubuntu-titan:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 43)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
MX/MX 400] (rev b2)

The dmesg listing is in the attached file.

--
Be the change you want to see in the world !

--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 
Old 04-22-2008, 06:35 PM
"Nicolae Ghimbovschi"
 
Default Not all partitions are detected

dmesg listing

[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC
2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fb820
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA4A0 checksum 0
[ 0.000000] ACPI: RSDP 000FA4A0, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7 10
MSFT 97)
[ 0.000000] ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7 11
MSFT 97)
[ 0.000000] ACPI: DSDT 1FFF0120, 30F2 (r1 VIA VIA_K7 1000
MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFF8000, 0040
[ 0.000000] ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7 9
MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:8 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
[ 0.000000] swsusp: Registered nosave memory region:
000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region:
00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region:
00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 130033
[ 0.000000] Kernel command line:
root=UUID=d699b2c1-9a2a-4b59-a0ea-c52f806c1154 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1666.505 MHz processor.
[ 17.709746] Console: colour VGA+ 80x25
[ 17.709751] console [tty0] enabled
[ 17.710285] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.710668] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.730306] Memory: 507812k/524224k available (2157k kernel code,
15888k reserved, 998k data, 364k init, 0k highmem)
[ 17.730317] virtual kernel memory layout:
[ 17.730319] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 17.730320] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 17.730322] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 17.730323] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 17.730325] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 17.730326] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 17.730328] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 17.730332] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 17.730387] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 17.810357] Calibrating delay using timer specific routine..
3336.87 BogoMIPS (lpj=6673756)
[ 17.810401] Security Framework initialized
[ 17.810410] SELinux: Disabled at boot.
[ 17.810436] AppArmor: AppArmor initialized
[ 17.810442] Failure registering capabilities with primary security module.
[ 17.810455] Mount-cache hash table entries: 512
[ 17.810634] CPU: After generic identify, caps: 0383fbff c1c3fbff
00000000 00000000 00000000 00000000 00000000 00000000
[ 17.810646] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
[ 17.810651] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.810654] CPU: L2 Cache: 256K (64 bytes/line)
[ 17.810658] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000
00000420 00000000 00000000 00000000 00000000
[ 17.810672] Compat vDSO mapped to ffffe000.
[ 17.810687] Checking 'hlt' instruction... OK.
[ 17.826639] SMP alternatives: switching to UP code
[ 17.828050] Freeing SMP alternatives: 11k freed
[ 17.828237] Early unpacking initramfs... done
[ 18.231995] ACPI: Core revision 20070126
[ 18.232128] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 18.234125] CPU0: AMD Athlon(tm) XP 2000+ stepping 01
[ 18.234159] Total of 1 processors activated (3336.87 BogoMIPS).
[ 18.234914] ENABLING IO-APIC IRQs
[ 18.235252] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 18.382013] Brought up 1 CPUs
[ 18.382087] CPU0 attaching sched-domain:
[ 18.382090] domain 0: span 01
[ 18.382093] groups: 01
[ 18.382386] net_namespace: 64 bytes
[ 18.382396] Booting paravirtualized kernel on bare hardware
[ 18.383019] Time: 20:29:35 Date: 04/22/08
[ 18.383068] NET: Registered protocol family 16
[ 18.383356] EISA bus registered
[ 18.383394] ACPI: bus type pci registered
[ 18.386527] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
[ 18.386530] PCI: Using configuration type 1
[ 18.386533] Setting up standard PCI resources
[ 18.391057] ACPI: EC: Look up EC in DSDT
[ 18.395248] ACPI: Interpreter enabled
[ 18.395252] ACPI: (supports S0 S1 S4 S5)
[ 18.395268] ACPI: Using IOAPIC for interrupt routing
[ 18.399764] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.400198] PCI quirk: region 0800-087f claimed by vt8235 PM
[ 18.400203] PCI quirk: region 0400-040f claimed by vt8235 SMB
[ 18.400502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.402543] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 18.402646] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 18.402745] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 18.402843] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 18.402965] ACPI: Power Resource [URP1] (off)
[ 18.402999] ACPI: Power Resource [URP2] (off)
[ 18.403030] ACPI: Power Resource [FDDP] (off)
[ 18.403061] ACPI: Power Resource [LPTP] (off)
[ 18.403128] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.403175] pnp: PnP ACPI init
[ 18.403185] ACPI: bus type pnp registered
[ 18.406250] pnp: PnP ACPI: found 11 devices
[ 18.406254] ACPI: ACPI bus type pnp unregistered
[ 18.406260] PnPBIOS: Disabled by ACPI PNP
[ 18.406682] PCI: Using ACPI for IRQ routing
[ 18.406688] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[ 18.417932] NET: Registered protocol family 8
[ 18.417935] NET: Registered protocol family 20
[ 18.418046] AppArmor: AppArmor Filesystem Enabled
[ 18.421909] Time: tsc clocksource has been installed.
[ 18.429962] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 18.429966] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 18.429969] system 00:01: ioport range 0x400-0x40f has been reserved
[ 18.429972] system 00:01: ioport range 0x820-0x821 has been reserved
[ 18.429977] system 00:01: iomem range 0xfee00000-0xfee00fff could
not be reserved
[ 18.460530] PCI: Bridge: 0000:00:01.0
[ 18.460532] IO window: disabled.
[ 18.460538] MEM window: dde00000-dfefffff
[ 18.460542] PREFETCH window: cdd00000-ddcfffff
[ 18.460561] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 18.460578] NET: Registered protocol family 2
[ 18.497989] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 18.498299] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 18.498576] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 18.498866] TCP: Hash tables configured (established 16384 bind 16384)
[ 18.498870] TCP reno registered
[ 18.510070] checking if image is initramfs... it is
[ 18.961522] Switched to high resolution mode on CPU 0
[ 19.263200] Freeing initrd memory: 7282k freed
[ 19.264205] audit: initializing netlink socket (disabled)
[ 19.264227] audit(1208896176.428:1): initialized
[ 19.266939] VFS: Disk quotas dquot_6.5.1
[ 19.267051] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 19.267251] io scheduler noop registered
[ 19.267255] io scheduler anticipatory registered
[ 19.267257] io scheduler deadline registered
[ 19.267270] io scheduler cfq registered (default)
[ 19.267289] PCI: VIA PCI bridge detected. Disabling DAC.
[ 19.267353] Boot video device is 0000:01:00.0
[ 19.267735] isapnp: Scanning for PnP cards...
[ 19.621265] isapnp: No Plug & Play device found
[ 19.660176] Real Time Clock Driver v1.12ac
[ 19.660323] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[ 19.660500] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.661428] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.662486] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 19.662586] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 19.662725] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 19.663138] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.663145] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.665317] mice: PS/2 mouse device common for all mice
[ 19.665485] EISA: Probing bus 0 at eisa.0
[ 19.665523] EISA: Detected 0 cards.
[ 19.665528] cpuidle: using governor ladder
[ 19.665531] cpuidle: using governor menu
[ 19.665741] NET: Registered protocol family 1
[ 19.665784] Using IPI No-Shortcut mode
[ 19.665840] registered taskstats version 1
[ 19.665958] Magic number: 4:688:498
[ 19.666254] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 19.666257] EDD information not available.
[ 19.666870] Freeing unused kernel memory: 364k freed
[ 19.700910] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 20.956958] fuse init (API version 7.9)
[ 20.990062] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 21.731611] usbcore: registered new interface driver usbfs
[ 21.731646] usbcore: registered new interface driver hub
[ 21.743416] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level,
low) -> IRQ 16
[ 21.796285] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]
MMIO=[dffff800-dfffffff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 21.824660] usbcore: registered new device driver usb
[ 21.865378] SCSI subsystem initialized
[ 21.872131] USB Universal Host Controller Interface driver v3.0
[ 21.951144] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 21.956440] libata version 3.00 loaded.
[ 21.972472] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level,
low) -> IRQ 17
[ 21.972495] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.972936] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 1
[ 21.972978] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e000
[ 21.973209] usb usb1: configuration #1 chosen from 1 choice
[ 21.973248] hub 1-0:1.0: USB hub found
[ 21.973258] hub 1-0:1.0: 2 ports detected
[ 22.063132] Floppy drive(s): fd0 is 1.44M
[ 22.075187] ACPI: PCI Interrupt 0000:00:10.1[b] -> GSI 21 (level,
low) -> IRQ 17
[ 22.075207] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 22.075241] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 2
[ 22.075270] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e400
[ 22.075433] usb usb2: configuration #1 chosen from 1 choice
[ 22.075464] hub 2-0:1.0: USB hub found
[ 22.075474] hub 2-0:1.0: 2 ports detected
[ 22.085862] FDC 0 is a post-1991 82077
[ 22.179105] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level,
low) -> IRQ 17
[ 22.179126] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 22.179162] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 3
[ 22.179192] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e800
[ 22.179369] usb usb3: configuration #1 chosen from 1 choice
[ 22.179406] hub 3-0:1.0: USB hub found
[ 22.179416] hub 3-0:1.0: 2 ports detected
[ 22.283992] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level,
low) -> IRQ 17
[ 22.284016] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 22.284065] ehci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 4
[ 22.284121] ehci_hcd 0000:00:10.3: irq 17, io mem 0xdffff700
[ 22.294832] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 22.295032] usb usb4: configuration #1 chosen from 1 choice
[ 22.295068] hub 4-0:1.0: USB hub found
[ 22.295080] hub 4-0:1.0: 6 ports detected
[ 22.399093] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level,
low) -> IRQ 18
[ 22.404867] eth0: VIA Rhine II at 0xdffff600, 00:30:1b:2b:a1:c1, IRQ 18.
[ 22.405578] eth0: MII PHY found at address 1, status 0x786d
advertising 01e1 Link 45e1.
[ 22.405994] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 22.406092] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 22.411509] pata_via 0000:00:11.1: version 0.3.3
[ 22.411542] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 22.413494] scsi0 : pata_via
[ 22.414887] scsi1 : pata_via
[ 22.417789] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 22.417794] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 22.579186] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 22.579193] ata1.00: 160086528 sectors, multi 16: LBA48
[ 22.595039] ata1.00: configured for UDMA/133
[ 23.230512] ata2.00: ATAPI: ASUS CRW-5232AS, 1.03, max UDMA/33
[ 23.230537] ata2.01: ATAPI: CDU5211, YYS7, max UDMA/33
[ 23.242868] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110600000039c1]
[ 23.394246] ata2.00: configured for UDMA/33
[ 23.558111] ata2.01: configured for UDMA/33
[ 23.558319] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0
YAR4 PQ: 0 ANSI: 5
[ 23.559342] scsi 1:0:0:0: CD-ROM ASUS CRW-5232AS
1.03 PQ: 0 ANSI: 5
[ 23.559854] scsi 1:0:1:0: CD-ROM SONY CD-ROM CDU5211
YYS7 PQ: 0 ANSI: 5
[ 23.577938] Driver 'sd' needs updating - please use bus_type methods
[ 23.578081] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 23.578102] sd 0:0:0:0: [sda] Write Protect is off
[ 23.578105] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.578132] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 23.578207] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 23.578220] sd 0:0:0:0: [sda] Write Protect is off
[ 23.578223] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.578244] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 23.578249] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 23.590495] sda1 sda2 sda3 sda4 <<3>ata1.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2
[ 23.656917] ata1.00: BMDMA stat 0x24
[ 23.656929] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 23.656931] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 23.656935] ata1.00: status: { DRDY ERR }
[ 23.656938] ata1.00: error: { ICRC ABRT }
[ 23.656967] ata1: soft resetting link
[ 23.833911] ata1.00: configured for UDMA/133
[ 23.833934] ata1: EH complete
[ 23.898142] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 23.898150] ata1.00: BMDMA stat 0x24
[ 23.898158] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 23.898160] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 23.898164] ata1.00: status: { DRDY ERR }
[ 23.898167] ata1.00: error: { ICRC ABRT }
[ 23.898196] ata1: soft resetting link
[ 24.077714] ata1.00: configured for UDMA/133
[ 24.077742] ata1: EH complete
[ 24.139391] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.139399] ata1.00: BMDMA stat 0x24
[ 24.139408] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 24.139410] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 24.139414] ata1.00: status: { DRDY ERR }
[ 24.139417] ata1.00: error: { ICRC ABRT }
[ 24.139446] ata1: soft resetting link
[ 24.317538] ata1.00: configured for UDMA/133
[ 24.317568] ata1: EH complete
[ 24.380617] ata1.00: limiting speed to UDMA/100:PIO4
[ 24.380622] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.380627] ata1.00: BMDMA stat 0x24
[ 24.380635] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 24.380637] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 24.380641] ata1.00: status: { DRDY ERR }
[ 24.380643] ata1.00: error: { ICRC ABRT }
[ 24.380672] ata1: soft resetting link
[ 24.557328] ata1.00: configured for UDMA/100
[ 24.557358] ata1: EH complete
[ 24.621880] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.621887] ata1.00: BMDMA stat 0x24
[ 24.621896] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 24.621898] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 24.621902] ata1.00: status: { DRDY ERR }
[ 24.621904] ata1.00: error: { ICRC ABRT }
[ 24.621933] ata1: soft resetting link
[ 24.801821] ata1.00: configured for UDMA/100
[ 24.801850] ata1: EH complete
[ 24.863130] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.863139] ata1.00: BMDMA stat 0x24
[ 24.863147] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 24.863149] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 24.863153] ata1.00: status: { DRDY ERR }
[ 24.863155] ata1.00: error: { ICRC ABRT }
[ 24.863185] ata1: soft resetting link
[ 25.041724] ata1.00: configured for UDMA/100
[ 25.041753] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 25.041758] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current]
[descriptor]
[ 25.041765] Descriptor sense data with sense descriptors (in hex):
[ 25.041767] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 25.041775] 05 01 4e a8
[ 25.041778] sd 0:0:0:0: [sda] Add. Sense: Scsi parity error
[ 25.041789] end_request: I/O error, dev sda, sector 83971752
[ 25.041795] Buffer I/O error on device sda, logical block 10496469
[ 25.041825] ata1: EH complete
[ 25.104350] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 25.104353] ata1.00: BMDMA stat 0x24
[ 25.104362] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 25.104363] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 25.104367] ata1.00: status: { DRDY ERR }
[ 25.104370] ata1.00: error: { ICRC ABRT }
[ 25.104390] ata1: soft resetting link
[ 25.281453] ata1.00: configured for UDMA/100
[ 25.281482] ata1: EH complete
[ 25.345617] ata1.00: limiting speed to UDMA/33:PIO4
[ 25.345627] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 25.345632] ata1.00: BMDMA stat 0x24
[ 25.345640] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
dma 4096 in
[ 25.345642] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
0x10 (ATA bus error)
[ 25.345645] ata1.00: status: { DRDY ERR }
[ 25.345648] ata1.00: error: { ICRC ABRT }
[ 25.345677] ata1: soft resetting link
[ 25.524577] ata1.00: configured for UDMA/33
[ 25.524608] ata1: EH complete
[ 25.540079] >
[ 25.540191] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 25.549300] sd 0:0:0:0: [sda] Attached SCSI disk
[ 25.556811] sd 0:0:0:0: [sda] Write Protect is off
[ 25.556820] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.556905] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 25.556938] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 25.556952] sd 0:0:0:0: [sda] Write Protect is off
[ 25.556955] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.556976] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 25.557387] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 25.557414] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 25.557438] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 25.559696] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 25.559707] Uniform CD-ROM driver Revision: 3.20
[ 25.559807] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 25.564304] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 25.564400] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 25.965938] Attempting manual resume
[ 25.965945] swsusp: Resume From Partition 8:3
[ 25.965947] PM: Checking swsusp image.
[ 25.966293] PM: Resume from disk failed.
[ 26.000624] kjournald starting. Commit interval 5 seconds
[ 26.000650] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.596358] Linux agpgart interface v0.102
[ 34.653063] agpgart: Detected VIA KM400/KM400A chipset
[ 34.658482] agpgart: AGP aperture is 64M @ 0xe0000000
[ 34.712521] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.780958] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.256404] irda_init()
[ 35.256440] NET: Registered protocol family 23
[ 35.296609] input: Power Button (FF) as /devices/virtual/input/input2
[ 35.308339] ACPI: Power Button (FF) [PWRF]
[ 35.308559] input: Power Button (CM) as /devices/virtual/input/input3
[ 35.320310] ACPI: Power Button (CM) [PWRB]
[ 35.320500] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 35.336316] ACPI: Sleep Button (CM) [SLPB]
[ 36.184806] nvidia: module license 'NVIDIA' taints kernel.
[ 38.062361] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 38.424336] input: GenPS/2 Genius Mouse as
/devices/platform/i8042/serio1/input/input6
[ 38.699915] parport_pc 00:0a: reported by Plug and Play ACPI
[ 38.700005] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 38.782738] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level,
low) -> IRQ 19
[ 38.783340] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05
Tue Jan 22 19:36:58 PST 2008
[ 38.882588] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level,
low) -> IRQ 20
[ 38.882740] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 41.599434] loop: module loaded
[ 41.630114] lp0: using parport0 (interrupt-driven).
[ 41.755205] Adding 1020116k swap on /dev/sda3. Priority:-1
extents:1 across:1020116k
[ 42.322551] EXT3 FS on sda2, internal journal
[ 43.683124] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 44.330295] No dock devices found.
[ 45.737420] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 45.737429] apm: overridden by ACPI.
[ 45.862309] ppdev: user-space parallel port driver
[ 45.985671] audit(1208885403.487:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=4833 profile="/usr/sbin/cupsd" namespace="default"
[ 47.112784] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 47.206319] Bluetooth: Core ver 2.11
[ 47.209718] NET: Registered protocol family 31
[ 47.209726] Bluetooth: HCI device and connection manager initialized
[ 47.209734] Bluetooth: HCI socket layer initialized
[ 47.278727] Bluetooth: L2CAP ver 2.9
[ 47.278736] Bluetooth: L2CAP socket layer initialized
[ 47.386624] Bluetooth: RFCOMM socket layer initialized
[ 47.386654] Bluetooth: RFCOMM TTY layer initialized
[ 47.386657] Bluetooth: RFCOMM ver 1.8
[ 48.603685] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 48.604633] agpgart: BIOS bug. AGP bridge claims to only support x4
rateFixing up support for x2 & x1
[ 48.604642] agpgart: Device is in legacy mode, falling back to 2.x
[ 48.606219] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 48.606948] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 50.371204] NET: Registered protocol family 17
[ 54.202013] NET: Registered protocol family 10
[ 54.202976] lo: Disabled Privacy Extensions
[ 64.583882] eth0: no IPv6 routers present
[ 84.280903] compiz.real[5534]: segfault at 0895547c eip b7b20df3
esp bf84a9a0 error 4
[ 643.390217] synaptic[5956]: segfault at 41206d85 eip 080b9646 esp
bfe52e80 error 4
[ 1104.154193] ieee1394: Node added: ID:BUS[0-00:1023] GUID[080046010263a55a]
[ 1104.155292] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 1104.433373] ieee1394: raw1394: /dev/raw1394 device initialized
[ 1104.449673] NOTE: The dv1394 driver is unsupported and may be
removed in a future Linux release. Use raw1394 instead.
[ 1125.177297] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 1125.177313] ieee1394: Node suspended: ID:BUS[0-00:1023]
GUID[080046010263a55a]
[ 1169.396114] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[080046010263a55a]
[ 1169.396560] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 1190.160929] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 1190.160945] ieee1394: Node suspended: ID:BUS[0-00:1023]
GUID[080046010263a55a]
[ 1257.782552] video1394: Installed video1394 module
[ 1282.384157] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[080046010263a55a]
[ 1282.384638] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 1382.134264] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 1382.134279] ieee1394: Node suspended: ID:BUS[0-00:1023]
GUID[080046010263a55a]
[ 1426.002302] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[080046010263a55a]
[ 1426.002449] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 1523.140695] ieee1394: Node changed: 0-01:1023 -> 0-00:1023
[ 1523.140711] ieee1394: Node suspended: ID:BUS[0-00:1023]
GUID[080046010263a55a]
[ 1606.720064] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[080046010263a55a]
[ 1606.720199] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 2000.760517] Bad page state in process 'kswapd0'
[ 2000.760521] page:c11012c0 flags:0x40000008 mapping:d98f2ac4
mapcount:0 count:0
[ 2000.760523] Trying to fix it up, but a reboot is needed
[ 2000.760524] Backtrace:
[ 2000.760537] Pid: 149, comm: kswapd0 Tainted: P 2.6.24-16-generic #1
[ 2000.760575] [<c016d7d3>] bad_page+0x63/0xa0
[ 2000.760601] [<c016deb7>] free_hot_cold_page+0x187/0x1a0
[ 2000.760612] [<c016def6>] __pagevec_free+0x26/0x30
[ 2000.760621] [<c0171307>] release_pages+0x137/0x160
[ 2000.760634] [<c01725df>] isolate_lru_pages+0x5f/0x1c0
[ 2000.760647] [<c0171905>] __pagevec_release+0x15/0x20
[ 2000.760652] [<c0173720>] shrink_inactive_list+0x2a0/0x350
[ 2000.760685] [<c017386c>] shrink_zone+0x9c/0x100
[ 2000.760694] [<c0173f0c>] kswapd+0x44c/0x490
[ 2000.760716] [<c0140b70>] autoremove_wake_function+0x0/0x40
[ 2000.760727] [<c0123a20>] complete+0x40/0x60
[ 2000.760736] [<c0173ac0>] kswapd+0x0/0x490
[ 2000.760741] [<c01408b2>] kthread+0x42/0x70
[ 2000.760744] [<c0140870>] kthread+0x0/0x70
[ 2000.760749] [<c0105677>] kernel_thread_helper+0x7/0x10
[ 2000.760760] =======================
[ 2211.726757] gnome-appearanc[7515]: segfault at 00000002 eip
b7229657 esp bff2fe1c error 4
[ 2597.554889] Bad page state in process 'ksoftirqd/0'
[ 2597.554893] page:c11012c0 flags:0x40000000 mapping:00000000
mapcount:1 count:0
[ 2597.554895] Trying to fix it up, but a reboot is needed
[ 2597.554897] Backtrace:
[ 2597.554908] Pid: 4, comm: ksoftirqd/0 Tainted: P B 2.6.24-16-generic #1
[ 2597.554945] [<c016d7d3>] bad_page+0x63/0xa0
[ 2597.554968] [<c016deb7>] free_hot_cold_page+0x187/0x1a0
[ 2597.554975] [<c0171812>] put_page+0xc2/0xf0
[ 2597.554983] [<c019e364>] __d_free+0x14/0x30
[ 2597.554991] [<c013e489>] __rcu_process_callbacks+0x69/0x1d0
[ 2597.555004] [<c013e608>] rcu_process_callbacks+0x18/0x30
[ 2597.555009] [<c0131f7d>] tasklet_action+0x4d/0xc0
[ 2597.555019] [<c0131a22>] __do_softirq+0x82/0x110
[ 2597.555029] [<c0131b05>] do_softirq+0x55/0x60
[ 2597.555033] [<c0131e89>] ksoftirqd+0x89/0x100
[ 2597.555039] [<c0131e00>] ksoftirqd+0x0/0x100
[ 2597.555043] [<c01408b2>] kthread+0x42/0x70
[ 2597.555048] [<c0140870>] kthread+0x0/0x70
[ 2597.555052] [<c0105677>] kernel_thread_helper+0x7/0x10
[ 2597.555064] =======================


On Tue, Apr 22, 2008 at 9:34 PM, Nicolae Ghimbovschi
<xfreebird@gmail.com> wrote:
> Hello ,
>
> I have installed ubuntu 8.04 RC
> Linux ubuntu-titan 2.6.24-16-generic #1 SMP Thu Apr 10 13:23:42 UTC
> 2008 i686 GNU/Linux
>
> The problem is in that it doesn't detect all partitions.
>
>
> root@ubuntu-titan:~# cat /proc/partitions
> major minor #blocks name
>
> 8 0 80043264 sda
> 8 1 20482843 sda1
> 8 2 20482875 sda2
> 8 3 1020127 sda3
> 8 4 1 sda4
>
> But when I use fdisk , it shows all the existing partitions:
>
> root@ubuntu-titan:~# fdisk /dev/sda
>
> The number of cylinders for this disk is set to 9964.
> There is nothing wrong with that, but this is larger than 1024,
> and could in certain setups cause problems with:
> 1) software that runs at boot time (e.g., old versions of LILO)
> 2) booting and partitioning software from other OSs
> (e.g., DOS FDISK, OS/2 FDISK)
>
> Command (m for help): p
>
> Disk /dev/sda: 81.9 GB, 81964302336 bytes
> 255 heads, 63 sectors/track, 9964 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> Disk identifier: 0x0fed0fed
>
> Device Boot Start End Blocks Id System
> /dev/sda1 * 1 2550 20482843+ 7 HPFS/NTFS
> /dev/sda2 2551 5100 20482875 83 Linux
> /dev/sda3 5101 5227 1020127+ 82 Linux swap / Solaris
> /dev/sda4 5228 9964 38049952+ 5 Extended
> /dev/sda5 5228 9964 38049921 7 HPFS/NTFS
>
> Command (m for help): q
>
>
> Below is a part from dmesg listing:
>
> ...
> [ 23.578223] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 23.578244] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 23.578249] sda:<4>Driver 'sr' needs updating - please use bus_type methods
> [ 23.590495] sda1 sda2 sda3 sda4 <<3>ata1.00: exception Emask 0x0
> SAct 0x0 SErr 0x0 action 0x2
> [ 23.656917] ata1.00: BMDMA stat 0x24
> [ 23.656929] ata1.00: cmd c8/00:08:a8:4e:01/00:00:00:00:00/e5 tag 0
> dma 4096 in
> [ 23.656931] res 51/84:00:a8:4e:01/00:00:00:00:00/e5 Emask
> 0x10 (ATA bus error)
> ...
>
> bus_type is a kernel boot parameter ?
>
> Additional info:
> root@ubuntu-titan:~# lspci
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> 00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
> Controller (rev 43)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 80)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 80)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 80)
> 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> 00:11.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc.
> VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
> 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
> MX/MX 400] (rev b2)
>
> The dmesg listing is in the attached file.
>
> --
> Be the change you want to see in the world !
>



--
Be the change you want to see in the world !

--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 

Thread Tools




All times are GMT. The time now is 06:43 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org