Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Ubuntu User (http://www.linux-archive.org/ubuntu-user/)
-   -   gcnccam-4.4.2 build problem (http://www.linux-archive.org/ubuntu-user/697028-gcnccam-4-4-2-build-problem.html)

Gene Heskett 08-23-2012 03:02 PM

gcnccam-4.4.2 build problem
 
Greetings all;

I am trying to build a gcode generator on a 10.04.4 LTS 32 bit system.

The ./configure output looks sane with no errors, but make reports a tummy
ache:

make[2]: Entering directory `/home/gene/gcnccam/src'
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -pthread -D_REENTRANT -DORBIT2=1
-I/usr/include/libgnomeuimm-2.6
-I/usr/lib/libgnomeuimm-2.6/include
-I/usr/include/libgnomemm-2.6
-I/usr/lib/libgnomemm-2.6/include
-I/usr/include/libgnomecanvasmm-2.6
-I/usr/lib/libgnomecanvasmm-2.6/include
-I/usr/include/gconfmm-2.6
-I/usr/lib/gconfmm-2.6/include
-I/usr/include/libglademm-2.4
-I/usr/lib/libglademm-2.4/include
-I/usr/include/libgnomeui-2.0
-I/usr/include/gnome-vfsmm-2.6
-I/usr/lib/gnome-vfsmm-2.6/include
-I/usr/include/gtkmm-2.4
-I/usr/lib/gtkmm-2.4/include
-I/usr/include/libgnome-2.0
-I/usr/include/giomm-2.4
-I/usr/lib/giomm-2.4/include
-I/usr/include/pangomm-1.4
-I/usr/lib/pangomm-1.4/include
-I/usr/include/gtk-2.0
-I/usr/include/gtk-unix-print-2.0
-I/usr/include/atkmm-1.6
-I/usr/include/gdkmm-2.4
-I/usr/lib/gdkmm-2.4/include
-I/usr/include/glibmm-2.4
-I/usr/lib/glibmm-2.4/include
-I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include
-I/usr/include/sigc++-2.0
-I/usr/lib/sigc++-2.0/include
-I/usr/include/cairomm-1.0
-I/usr/lib/cairomm-1.0/include
-I/usr/include/pango-1.0
-I/usr/include/cairo
-I/usr/include/pixman-1
-I/usr/include/freetype2
-I/usr/include/directfb
-I/usr/include/libpng12
-I/usr/lib/gtk-2.0/include
-I/usr/include/atk-1.0
-I/usr/include/gio-unix-2.0/
-I/usr/include/orbit-2.0
-I/usr/include/gconf/2
-I/usr/include/gnome-vfs-2.0
-I/usr/lib/gnome-vfs-2.0/include
-I/usr/include/libbonobo-2.0
-I/usr/include/dbus-1.0
-I/usr/lib/dbus-1.0/include
-I/usr/include/bonobo-activation-2.0
-I/usr/include/libgnomecanvas-2.0
-I/usr/include/gail-1.0
-I/usr/include/libart-2.0
-I/usr/include/libglade-2.0
-I/usr/include/libxml2
-I/usr/include/gnome-keyring-1
-I/usr/include/libbonoboui-2.0
-Wall -g -g -O2 -MT FrameTool_glade.o -MD -MP -MF
".deps/FrameTool_glade.Tpo" -c -o FrameTool_glade.o FrameTool_glade.cc;
then mv -f ".deps/FrameTool_glade.Tpo" ".deps/FrameTool_glade.Po";
else rm -f ".deps/FrameTool_glade.Tpo"; exit 1; fi
FrameTool_glade.cc:39:34: error: sigc++/compatibility.h: No such file or
directory
FrameTool_glade.cc: In constructor
‘FrameTool_glade::FrameTool_glade(GlademmData*) :
FrameTool_glade.cc:184: error: ‘SigC’ has not been declared
FrameTool_glade.cc:185: error: ‘SigC’ has not been declared
FrameTool_glade.cc:186: error: ‘SigC’ has not been declared
make[2]: *** [FrameTool_glade.o] Error 1

Since in formatting the above list of 'dependencies' I used it to check
with synaptic to make sure I had the .dev stuff listed installed, and I
believe I do. But I'm about burned out so I won't claim to have it all.

I cd'd to /usr/include, and did an "ls -lR sigc++*/*" and got a good list
of what sigc++ stuff I have, but that file simply isn't on my machine.

Can someone else offer a clue here, I am fresh out.

Thanks.


Cheers, Gene
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
My web page: <http://coyoteden.dyndns-free.com:85/gene> is up!
You give me space to belong to myself yet without separating me
from your own life. May it all turn out to your happiness.
-- Goethe

--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Gene Heskett 08-24-2012 02:36 PM

gcnccam-4.4.2 build problem
 
On Friday 24 August 2012 10:36:35 Gene Heskett did opine:

Ping

> Greetings all;
>
> I am trying to build a gcode generator on a 10.04.4 LTS 32 bit system.
>
> The ./configure output looks sane with no errors, but make reports a
> tummy ache:
>
> make[2]: Entering directory `/home/gene/gcnccam/src'
> if g++ -DHAVE_CONFIG_H -I. -I. -I.. -pthread -D_REENTRANT -DORBIT2=1
> -I/usr/include/libgnomeuimm-2.6
> -I/usr/lib/libgnomeuimm-2.6/include
> -I/usr/include/libgnomemm-2.6
> -I/usr/lib/libgnomemm-2.6/include
> -I/usr/include/libgnomecanvasmm-2.6
> -I/usr/lib/libgnomecanvasmm-2.6/include
> -I/usr/include/gconfmm-2.6
> -I/usr/lib/gconfmm-2.6/include
> -I/usr/include/libglademm-2.4
> -I/usr/lib/libglademm-2.4/include
> -I/usr/include/libgnomeui-2.0
> -I/usr/include/gnome-vfsmm-2.6
> -I/usr/lib/gnome-vfsmm-2.6/include
> -I/usr/include/gtkmm-2.4
> -I/usr/lib/gtkmm-2.4/include
> -I/usr/include/libgnome-2.0
> -I/usr/include/giomm-2.4
> -I/usr/lib/giomm-2.4/include
> -I/usr/include/pangomm-1.4
> -I/usr/lib/pangomm-1.4/include
> -I/usr/include/gtk-2.0
> -I/usr/include/gtk-unix-print-2.0
> -I/usr/include/atkmm-1.6
> -I/usr/include/gdkmm-2.4
> -I/usr/lib/gdkmm-2.4/include
> -I/usr/include/glibmm-2.4
> -I/usr/lib/glibmm-2.4/include
> -I/usr/include/glib-2.0
> -I/usr/lib/glib-2.0/include
> -I/usr/include/sigc++-2.0
> -I/usr/lib/sigc++-2.0/include
> -I/usr/include/cairomm-1.0
> -I/usr/lib/cairomm-1.0/include
> -I/usr/include/pango-1.0
> -I/usr/include/cairo
> -I/usr/include/pixman-1
> -I/usr/include/freetype2
> -I/usr/include/directfb
> -I/usr/include/libpng12
> -I/usr/lib/gtk-2.0/include
> -I/usr/include/atk-1.0
> -I/usr/include/gio-unix-2.0/
> -I/usr/include/orbit-2.0
> -I/usr/include/gconf/2
> -I/usr/include/gnome-vfs-2.0
> -I/usr/lib/gnome-vfs-2.0/include
> -I/usr/include/libbonobo-2.0
> -I/usr/include/dbus-1.0
> -I/usr/lib/dbus-1.0/include
> -I/usr/include/bonobo-activation-2.0
> -I/usr/include/libgnomecanvas-2.0
> -I/usr/include/gail-1.0
> -I/usr/include/libart-2.0
> -I/usr/include/libglade-2.0
> -I/usr/include/libxml2
> -I/usr/include/gnome-keyring-1
> -I/usr/include/libbonoboui-2.0
> -Wall -g -g -O2 -MT FrameTool_glade.o -MD -MP -MF
> ".deps/FrameTool_glade.Tpo" -c -o FrameTool_glade.o FrameTool_glade.cc;
> then mv -f ".deps/FrameTool_glade.Tpo" ".deps/FrameTool_glade.Po";
> else rm -f ".deps/FrameTool_glade.Tpo"; exit 1; fi
> FrameTool_glade.cc:39:34: error: sigc++/compatibility.h: No such file or
> directory
> FrameTool_glade.cc: In constructor
> â€کFrameTool_glade::FrameTool_glade(GlademmDat a*)’:
> FrameTool_glade.cc:184: error: â€کSigC’ has not been declared
> FrameTool_glade.cc:185: error: â€کSigC’ has not been declared
> FrameTool_glade.cc:186: error: â€کSigC’ has not been declared
> make[2]: *** [FrameTool_glade.o] Error 1
>
> Since in formatting the above list of 'dependencies' I used it to check
> with synaptic to make sure I had the .dev stuff listed installed, and I
> believe I do. But I'm about burned out so I won't claim to have it all.
>
> I cd'd to /usr/include, and did an "ls -lR sigc++*/*" and got a good
> list of what sigc++ stuff I have, but that file simply isn't on my
> machine.
>
> Can someone else offer a clue here, I am fresh out.
>
> Thanks.
>
>
> Cheers, Gene


Cheers, Gene
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
My web page: <http://coyoteden.dyndns-free.com:85/gene> is up!
QOTD:
"I only touch base with reality on an as-needed basis!"

--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Colin Law 08-24-2012 02:50 PM

gcnccam-4.4.2 build problem
 
On 23 August 2012 16:02, Gene Heskett <gheskett@wdtv.com> wrote:
> Greetings all;
>
> I am trying to build a gcode generator on a 10.04.4 LTS 32 bit system.
>
> The ./configure output looks sane with no errors, but make reports a tummy
> ache:
>
> make[2]: Entering directory `/home/gene/gcnccam/src'
> if g++ -DHAVE_CONFIG_H -I. -I. -I.. -pthread -D_REENTRANT -DORBIT2=1
> -I/usr/include/libgnomeuimm-2.6
> -I/usr/lib/libgnomeuimm-2.6/include
> -I/usr/include/libgnomemm-2.6
> -I/usr/lib/libgnomemm-2.6/include
> -I/usr/include/libgnomecanvasmm-2.6
> -I/usr/lib/libgnomecanvasmm-2.6/include
> -I/usr/include/gconfmm-2.6
> -I/usr/lib/gconfmm-2.6/include
> -I/usr/include/libglademm-2.4
> -I/usr/lib/libglademm-2.4/include
> -I/usr/include/libgnomeui-2.0
> -I/usr/include/gnome-vfsmm-2.6
> -I/usr/lib/gnome-vfsmm-2.6/include
> -I/usr/include/gtkmm-2.4
> -I/usr/lib/gtkmm-2.4/include
> -I/usr/include/libgnome-2.0
> -I/usr/include/giomm-2.4
> -I/usr/lib/giomm-2.4/include
> -I/usr/include/pangomm-1.4
> -I/usr/lib/pangomm-1.4/include
> -I/usr/include/gtk-2.0
> -I/usr/include/gtk-unix-print-2.0
> -I/usr/include/atkmm-1.6
> -I/usr/include/gdkmm-2.4
> -I/usr/lib/gdkmm-2.4/include
> -I/usr/include/glibmm-2.4
> -I/usr/lib/glibmm-2.4/include
> -I/usr/include/glib-2.0
> -I/usr/lib/glib-2.0/include
> -I/usr/include/sigc++-2.0
> -I/usr/lib/sigc++-2.0/include
> -I/usr/include/cairomm-1.0
> -I/usr/lib/cairomm-1.0/include
> -I/usr/include/pango-1.0
> -I/usr/include/cairo
> -I/usr/include/pixman-1
> -I/usr/include/freetype2
> -I/usr/include/directfb
> -I/usr/include/libpng12
> -I/usr/lib/gtk-2.0/include
> -I/usr/include/atk-1.0
> -I/usr/include/gio-unix-2.0/
> -I/usr/include/orbit-2.0
> -I/usr/include/gconf/2
> -I/usr/include/gnome-vfs-2.0
> -I/usr/lib/gnome-vfs-2.0/include
> -I/usr/include/libbonobo-2.0
> -I/usr/include/dbus-1.0
> -I/usr/lib/dbus-1.0/include
> -I/usr/include/bonobo-activation-2.0
> -I/usr/include/libgnomecanvas-2.0
> -I/usr/include/gail-1.0
> -I/usr/include/libart-2.0
> -I/usr/include/libglade-2.0
> -I/usr/include/libxml2
> -I/usr/include/gnome-keyring-1
> -I/usr/include/libbonoboui-2.0
> -Wall -g -g -O2 -MT FrameTool_glade.o -MD -MP -MF
> ".deps/FrameTool_glade.Tpo" -c -o FrameTool_glade.o FrameTool_glade.cc;
> then mv -f ".deps/FrameTool_glade.Tpo" ".deps/FrameTool_glade.Po";
> else rm -f ".deps/FrameTool_glade.Tpo"; exit 1; fi
> FrameTool_glade.cc:39:34: error: sigc++/compatibility.h: No such file or
> directory
> FrameTool_glade.cc: In constructor
> ‘FrameTool_glade::FrameTool_glade(GlademmData*) :
> FrameTool_glade.cc:184: error: ‘SigC’ has not been declared
> FrameTool_glade.cc:185: error: ‘SigC’ has not been declared
> FrameTool_glade.cc:186: error: ‘SigC’ has not been declared
> make[2]: *** [FrameTool_glade.o] Error 1
>
> Since in formatting the above list of 'dependencies' I used it to check
> with synaptic to make sure I had the .dev stuff listed installed, and I
> believe I do. But I'm about burned out so I won't claim to have it all.
>
> I cd'd to /usr/include, and did an "ls -lR sigc++*/*" and got a good list
> of what sigc++ stuff I have, but that file simply isn't on my machine.
>
> Can someone else offer a clue here, I am fresh out.

I don't know anything about the code but googling for
sigc++/compatibility.h
brings up lots of links which look like your problem. Looking at a
couple briefly suggests that interface is obsolete. Possibly you have
incompatible versions of stuff.

Colin

--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Gene Heskett 08-24-2012 04:21 PM

gcnccam-4.4.2 build problem
 
On Friday 24 August 2012 12:12:01 Colin Law did opine:

> On 23 August 2012 16:02, Gene Heskett <gheskett@wdtv.com> wrote:
> > Greetings all;
> >
> > I am trying to build a gcode generator on a 10.04.4 LTS 32 bit system.

[...]

> > Can someone else offer a clue here, I am fresh out.
>
> I don't know anything about the code but googling for
> sigc++/compatibility.h
> brings up lots of links which look like your problem. Looking at a
> couple briefly suggests that interface is obsolete. Possibly you have
> incompatible versions of stuff.
>
> Colin

Thanks Colin. I don't know enough about c++ to make a stab at fixing it
either. There is a .deb of version 4.4.1 available, and that works but has
a z axis bug, so I was trying to see if I could get the newer version to
build.

It may be possible to work around the z axis bug by doing the z stuff
outside it, using this generators output as a callable subroutine. I guess
that will have to be investigated. Doing that however, requires that the
solution to the traveling salesman problem be repeated by the machinery for
each increment of the Z cut, which can be and is time consuming when the
machines free speeds are limited by stepper motor characteristics.

Thanks for looking, Colin.

Cheers, Gene
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
My web page: <http://coyoteden.dyndns-free.com:85/gene> is up!
Life does not begin at the moment of conception or the moment of birth.
It begins when the kids leave home and the dog dies.

--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users


All times are GMT. The time now is 02:38 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.