FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Ubuntu > Ubuntu User

 
 
LinkBack Thread Tools
 
Old 11-19-2009, 01:13 PM
Richard Gliebe
 
Default check_nt MEMUSE

On 11/19/09 2:37 PM Thomas Guyot-Sionnest wrote:

Hi Thomas,


>> the Client Logfile shows me:
>>
>> [...]
>> 2009-11-19 07:43:04: error:sourceNSCP-stableincludeSocket.h:699:
>> Error: Could not complete SSL handshake : [-1] 1, attempting to resume...
>> [...]
>>
>> Whats going on? ;-)
>
> This seems to be because your NRPE don't have ssl enabled. Look at the
> - --help output of check_nrpe, you should see:
>
> SSL/TLS Available: Anonymous DH Mode, OpenSSL 0.9.6 or higher required
>

there is nothing for SSL. We are using nrpe 1.9. (see below)

>> Here is my NSC.ini
>>
>> [...]
>>
>> [NRPE]
>> ;# NRPE PORT NUMBER
>> ; This is the port the NRPEListener.dll will listen to.
>> port=5666
>> ;
>> ;# COMMAND TIMEOUT
>> ; This specifies the maximum number of seconds that the NRPE daemon
>> will allow plug-ins to finish executing before killing them off.
>> ;command_timeout=60
>> ;
>> ;# COMMAND ARGUMENT PROCESSING
>> ; This option determines whether or not the NRPE daemon will allow
>> clients to specify arguments to commands that are executed.
>> ;allow_arguments=0
>> ;
>> ;# COMMAND ALLOW NASTY META CHARS
>> ; This option determines whether or not the NRPE daemon will allow
>> clients to specify nasty (as in |`&><'"[]{}) characters in arguments.
>> ;allow_nasty_meta_chars=0
>> ;
>> ;# USE SSL SOCKET
>> ; This option controls if SSL should be used on the socket.
>> use_ssl=1
>
> Atlernatively turn this to 0 and use the -n switch in check_nrpe (so if
> you upgrade you won't break your checks by enabling SSL)+

Ok, I've set it to "0", but our check_nrpe doesn't know the "-n" option.

./check_nrpe -H orbiter.uclv.net -p 5666 -c 'CheckMem ShowAll=long
MaxWarn=80 MaxCrit=90 type=physical' -n

Incorrect command line arguments supplied

NRPE Plugin for Nagios
Copyright (c) 1999-2003 Ethan Galstad (nagios@nagios.org)
Version: 1.9
Last Modified: 07-22-2003
License: GPL

Usage: ./check_nrpe -H <host_address> [-p port] [-c command] [-to to_sec]

Options:
<host_address> = The IP address of the host running the NRPE daemon
[port] = The port on which the daemon is running - default is 5666
[command] = The name of the command that the remote daemon should run
[to_sec] = Number of seconds before connection attempt times out.
Default timeout is 10 seconds

>> ;# ALLOWED HOST ADDRESSES
>> ; This is a comma-delimited list of IP address of hosts that are
>> allowed to talk to NRPE deamon.
>> ; If you leave this blank the global version will be used instead.
>> allowed_hosts=<removed>
>
> Make sure tis parameter list the IP/network from your monitoring server
> (be extra careful if your monitoring server has multiple VLANs / servers)

these are the IPs from our monitoring servers, and they don't have
multiple VLANs/servers.

Richard



--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 

Thread Tools




All times are GMT. The time now is 07:05 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org