Karmic is totally unable to play any sound on my PC. With 9.04, everything went well.
Here are dmesg and lspci.
I would deeply appreciate your help.
[*** 0.000000] Initializing cgroup subsys cpuset
[*** 0.000000] Initializing cgroup subsys cpu
[*** 0.000000] Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[*** 0.000000]** 3 base 0CFC00000 mask FFFC00000 uncachable
[*** 0.000000]** 4 base 100000000 mask F80000000 write-back
[*** 0.000000]** 5 base 180000000 mask FE0000000 write-back
[*** 0.000000]** 6 base 1A0000000 mask FF8000000 write-back
[*** 0.000000]** 7 disabled
[*** 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[*** 0.000000] e820 update range: 00000000cfc00000 - 0000000100000000 (usable) ==> (reserved)
[*** 0.000000] e820 update range: 00000001a8000000 - 00000001ac000000 (usable) ==> (reserved)
[*** 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 64MB of RAM.
[*** 0.000000] ------------[ cut here ]------------
[*** 0.000000] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/cpu/mtrr/cleanup.c:1091 mtrr_trim_uncached_memory+0x2a6/0x2d1()
[*** 0.000000] ACPI: Local APIC address 0xfee00000
[*** 0.000000] No NUMA configuration found
[*** 0.000000] Faking a node at 0000000000000000-00000001a8000000
[*** 0.000000] Bootmem setup node 0 0000000000000000-00000001a8000000
[*** 0.000000] ACPI: IRQ0 used by override.
[*** 0.000000] ACPI: IRQ2 used by override.
[*** 0.000000] ACPI: IRQ9 used by override.
[*** 0.000000] Using ACPI (MADT) for SMP configuration information
[*** 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[*** 0.000000] No AGP bridge found
[*** 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[*** 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[*** 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[*** 0.630123]*** groups: 1,3 0,2
[*** 0.630234] Booting paravirtualized kernel on bare hardware
[*** 0.630234] regulator: core version 0.5
[*** 0.630234] Time:* 3:20:22* Date: 11/05/09
[*** 0.630234] NET: Registered protocol family 16
[*** 0.630234] ACPI: bus type pci registered
[*** 0.630308] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[*** 0.630311] PCI: MCFG area at f0000000 reserved in E820
[*** 0.634677] PCI: Using MMCONFIG at f0000000 - f7ffffff
[*** 0.634678] PCI: Using configuration type 1 for base access
[*** 0.635438] bio: create slab <bio-0> at 0
[*** 0.635438] ACPI: EC: Look up EC in DSDT
[*** 0.641162] ACPI: Interpreter enabled
[*** 0.641173] ACPI: (supports S0 S1 S3 S4 S5)
[*** 0.641199] ACPI: Using IOAPIC for interrupt routing
[*** 0.644811] ACPI: No dock devices found.
[*** 0.645655] ACPI: PCI Root Bridge [PCI0] (0000:00)
[*** 0.645744] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[*** 0.680206] hpet clockevent registered
[*** 0.680209] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[*** 0.680223] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[*** 0.680228] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[*** 0.730092] pnp: PnP ACPI init
[*** 0.730106] ACPI: bus type pnp registered
[*** 0.732223] pnp: PnP ACPI: found 10 devices
[*** 0.732225] ACPI: ACPI bus type pnp unregistered
[*** 0.732234] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
[*** 0.732236] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
[*** 0.732239] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[*** 0.732241] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[*** 0.732244] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[*** 0.732246] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[*** 0.732249] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[*** 0.732251] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[*** 0.732253] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[*** 0.732256] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[*** 0.732258] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[*** 0.732261] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
[*** 0.732267] system 00:06: ioport range 0x500-0x53f has been reserved
[*** 0.732269] system 00:06: ioport range 0x400-0x47f has been reserved
[*** 0.732271] system 00:06: ioport range 0x680-0x6ff has been reserved
[*** 0.736920] AppArmor: AppArmor Filesystem Enabled
[*** 0.736936] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[*** 0.917431] fuse init (API version 7.12)
[*** 0.917511] msgmni has been set to 11703
[*** 0.917851] alg: No test for stdrng (krng)
[*** 0.917865] io scheduler noop registered
[*** 0.917868] io scheduler anticipatory registered
[*** 0.917871] io scheduler deadline registered
[*** 0.917919] io scheduler cfq registered (default)
[*** 0.918287] pci 0000:01:00.0: Boot video device
[*** 0.918467]** alloc irq_desc for 24 on node 0
[*** 0.918469]** alloc kstat_irqs on node 0
[*** 0.918477] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[*** 0.918482] pcieport-driver 0000:00:01.0: setting latency timer to 64
[*** 0.918637]** alloc irq_desc for 25 on node 0
[*** 0.918638]** alloc kstat_irqs on node 0
[*** 0.918644] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[*** 0.918651] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[*** 0.918822]** alloc irq_desc for 26 on node 0
[*** 0.918824]** alloc kstat_irqs on node 0
[*** 0.918830] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[*** 0.918837] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[*** 0.919012]** alloc irq_desc for 27 on node 0
[*** 0.919013]** alloc kstat_irqs on node 0
[*** 0.919019] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[*** 0.919026] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[*** 0.919195]** alloc irq_desc for 28 on node 0
[*** 0.919197]** alloc kstat_irqs on node 0
[*** 0.919203] pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
[*** 0.919210] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[*** 0.919383]** alloc irq_desc for 29 on node 0
[*** 0.919384]** alloc kstat_irqs on node 0
[*** 0.919390] pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X
[*** 0.919397] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[*** 0.919479] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[*** 0.919580] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[*** 0.919684] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[*** 0.919687] ACPI: Power Button [PWRF]
[*** 0.919734] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[*** 0.919739] ACPI: Sleep Button [SLPB]
[*** 0.920090] Monitor-Mwait will be used to enter C-1 state
[*** 0.920135] processor LNXCPU:00: registered as cooling_device0
[*** 0.920138] ACPI: Processor [CPU0] (supports 8 throttling states)
[*** 0.923132] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[*** 0.923205] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[*** 0.923443] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[*** 0.924261] brd: module loaded
[*** 0.924629] loop: module loaded
[*** 0.924690] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[*** 0.924809] ahci 0000:00:1f.2: version 3.0
[*** 0.924822]** alloc irq_desc for 21 on node 0
[*** 0.924824]** alloc kstat_irqs on node 0
[*** 0.924828] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[*** 0.924878]** alloc irq_desc for 30 on node 0
[*** 0.924879]** alloc kstat_irqs on node 0
[*** 0.924886] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[*** 0.924950] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[*** 0.924953] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ems
[*** 1.021416] ata1: SATA max UDMA/133 abar m2048@0xe0325000 port 0xe0325100 irq 30
[*** 1.021419] ata2: SATA max UDMA/133 abar m2048@0xe0325000 port 0xe0325180 irq 30
[*** 1.021421] ata3: SATA max UDMA/133 abar m2048@0xe0325000 port 0xe0325200 irq 30
[*** 1.021424] ata4: SATA max UDMA/133 abar m2048@0xe0325000 port 0xe0325280 irq 30
[*** 1.021426] ata5: SATA max UDMA/133 abar m2048@0xe0325000 port 0xe0325300 irq 30
[*** 1.021428] ata6: SATA max UDMA/133 abar m2048@0xe0325000 port 0xe0325380 irq 30
[*** 1.022871] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[*** 1.026759] ehci_hcd 0000:00:1a.7: debug port 1
[*** 1.026764] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[*** 1.026768] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe0325c00
[*** 1.040969] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[*** 1.041061] usb usb1: configuration #1 chosen from 1 choice
[*** 1.041096] hub 1-0:1.0: USB hub found
[*** 1.041107] hub 1-0:1.0: 6 ports detected
[*** 1.041252]** alloc irq_desc for 23 on node 0
[*** 1.041255]** alloc kstat_irqs on node 0
[*** 1.041270] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[*** 1.041279] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[*** 1.041281] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[*** 1.041309] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[*** 1.045192] ehci_hcd 0000:00:1d.7: debug port 1
[*** 1.045197] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[*** 1.045207] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0325800
[*** 1.061054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[*** 1.061126] usb usb2: configuration #1 chosen from 1 choice
[*** 1.061159] hub 2-0:1.0: USB hub found
[*** 1.061166] hub 2-0:1.0: 6 ports detected
[*** 1.061240] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[*** 1.061290] uhci_hcd: USB Universal Host Controller Interface driver
[*** 1.061441] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[*** 1.061467] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000030e0
[*** 1.061530] usb usb3: configuration #1 chosen from 1 choice
[*** 1.061553] hub 3-0:1.0: USB hub found
[*** 1.061559] hub 3-0:1.0: 2 ports detected
[*** 1.061660] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[*** 1.061667] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[*** 1.061680] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[*** 1.061707] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[*** 1.061732] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030c0
[*** 1.061795] usb usb4: configuration #1 chosen from 1 choice
[*** 1.061816] hub 4-0:1.0: USB hub found
[*** 1.061821] hub 4-0:1.0: 2 ports detected
[*** 1.061923] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
[*** 1.061930] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[*** 1.061944] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[*** 1.061970] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[*** 1.061992] uhci_hcd 0000:00:1a.2: irq 17, io base 0x000030a0
[*** 1.062055] usb usb5: configuration #1 chosen from 1 choice
[*** 1.062076] hub 5-0:1.0: USB hub found
[*** 1.062081] hub 5-0:1.0: 2 ports detected
[*** 1.062186] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[*** 1.062203] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[*** 1.062205] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[*** 1.062233] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[*** 1.062253] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[*** 1.062317] usb usb6: configuration #1 chosen from 1 choice
[*** 1.062338] hub 6-0:1.0: USB hub found
[*** 1.062343] hub 6-0:1.0: 2 ports detected
[*** 1.062445] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[*** 1.062452] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[*** 1.062466] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[*** 1.062496] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[*** 1.062522] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[*** 1.062582] usb usb7: configuration #1 chosen from 1 choice
[*** 1.062605] hub 7-0:1.0: USB hub found
[*** 1.062610] hub 7-0:1.0: 2 ports detected
[*** 1.062712] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[*** 1.062719] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[*** 1.062732] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[*** 1.062769] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[*** 1.062789] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[*** 1.062854] usb usb8: configuration #1 chosen from 1 choice
[*** 1.062877] hub 8-0:1.0: USB hub found
[*** 1.062882] hub 8-0:1.0: 2 ports detected
[*** 1.062984] PNP: No PS/2 controller found. Probing ports directly.
[*** 1.065762] serio: i8042 KBD port at 0x60,0x64 irq 1
[*** 1.065766] serio: i8042 AUX port at 0x60,0x64 irq 12
[*** 1.065820] mice: PS/2 mouse device common for all mice
[*** 1.065894] rtc_cmos 00:03: RTC can wake from S4
[*** 1.065920] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[*** 1.065941] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[*** 1.066019] device-mapper: uevent: version 1.0.3
[*** 1.066129] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[*** 1.066266] device-mapper: multipath: version 1.1.0 loaded
[*** 1.066270] device-mapper: multipath round-robin: version 1.0.0 loaded
[*** 1.066603] cpuidle: using governor ladder
[*** 1.066606] cpuidle: using governor menu
[*** 1.067863] Bluetooth: RFCOMM socket layer initialized
[*** 1.067865] Bluetooth: RFCOMM ver 1.11
[*** 1.068448] PM: Resume from disk failed.
[*** 1.068459] registered taskstats version 1
[*** 1.068581]** Magic number: 1:990:309
[*** 1.068598] tty tty38: hash matches
[*** 1.068659] rtc_cmos 00:03: setting system clock to 2009-11-05 03:20:22 UTC (1257391222)
[*** 1.068661] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[*** 1.068663] EDD information not available.
[*** 1.183255] Switched to high resolution mode on CPU 2
[*** 1.184123] Switched to high resolution mode on CPU 3
[*** 1.184526] Switched to high resolution mode on CPU 1
[*** 1.191828] Switched to high resolution mode on CPU 0
[*** 1.373812] ata1: SATA link down (SStatus 0 SControl 300)
[*** 1.373834] ata6: SATA link down (SStatus 0 SControl 300)
[*** 1.373852] ata5: SATA link down (SStatus 0 SControl 300)
[*** 1.420033] usb 1-2: new high speed USB device using ehci_hcd and address 3
[*** 1.553784] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[*** 1.553799] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[*** 1.553810] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[*** 1.554683] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100, ATAPI AN
[*** 1.816851] e1000e 0000:00:19.0: setting latency timer to 64
[*** 1.816943]** alloc irq_desc for 31 on node 0
[*** 1.816945]** alloc kstat_irqs on node 0
[*** 1.816955] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[*** 1.825306] [drm] Initialized drm 1.1.0 20060810
[*** 1.831445] Initializing USB Mass Storage driver...
[*** 1.831591] scsi8 : SCSI emulation for USB Mass Storage devices
[*** 1.831681] usbcore: registered new interface driver usb-storage
[*** 1.831684] USB Mass Storage support registered.
[*** 1.839998] [drm] radeon default to kernel modesetting DISABLED.
[*** 1.840215] usb-storage: device found at 3
[*** 1.840216] usb-storage: waiting for device to settle before scanning
[*** 1.840886] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[*** 1.840891] pci 0000:01:00.0: setting latency timer to 64
[*** 1.841040] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[*** 1.871154] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]* MMIO=[e0014000-e00147ff]* Max Packet=[2048]* IR/IT contexts=[4/8]
[*** 2.032602] usb 3-1: new low speed USB device using uhci_hcd and address 2
[*** 2.092483] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:a7:c9:17
[*** 2.337832] input: Chicony* USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[*** 2.337885] generic-usb 0003:04D9:0025.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony* USB Keyboard] on usb-0000:00:1a.0-1/input0
[*** 2.431777] input: Chicony* USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[*** 2.431828] generic-usb 0003:04D9:0025.0002: input,hidraw1: USB HID v1.10 Device [Chicony* USB Keyboard] on usb-0000:00:1a.0-1/input1
[*** 2.431842] usbcore: registered new interface driver usbhid
[*** 2.431844] usbhid: v2.6:USB HID core driver
[*** 2.581493] usb 5-1: new low speed USB device using uhci_hcd and address 2
[*** 2.781149] usb 5-1: configuration #1 chosen from 1 choice
[*** 2.797348] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input5
[*** 2.797410] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.2-1/input0
[*** 3.081305] usb 5-2: new full speed USB device using uhci_hcd and address 3
[*** 3.191405] ieee1394: Host added: ID:BUS[0-00:1023]* GUID[0090270001e8034e]
[*** 3.287133] usb 5-2: configuration #1 chosen from 1 choice
[*** 8.986684] Adding 9181108k swap on /dev/mapper/isw_bahdiiijae_Volume05.* Priority:-1 extents:1 across:9181108k
[*** 9.402102] udev: starting version 147
[*** 9.771415] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2112
[*** 9.771443] usbcore: registered new interface driver usblp
[*** 9.788811] lp: driver loaded but no devices found
[*** 9.861127] Bluetooth: Generic Bluetooth USB driver ver 0.5
[*** 9.861220] usbcore: registered new interface driver btusb
[*** 9.912609] cfg80211: Calling CRDA to update world regulatory domain
[** 10.228578] heci: module is from the staging directory, the quality is unknown, you have been warned.
[** 10.229549] heci: Intel(R) Management Engine Interface - version 5.0.0.31
[** 10.229551] heci: Copyright (c) 2003 - 2008 Intel Corporation.
[** 10.229776] heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[** 10.229782] heci 0000:00:03.0: setting latency timer to 64
[** 10.230041] heci: link layer has been established.
[** 10.343673] heci driver initialization successful.
[** 10.477931] EXT4-fs (dm-2): internal journal on dm-2:8
[** 10.524127]** alloc irq_desc for 22 on node 0
[** 10.524130]** alloc kstat_irqs on node 0
[** 10.524136] ath5k 0000:07:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[** 10.524190] ath5k 0000:07:01.0: registered as 'phy0'
[** 10.574157] ip_tables: (C) 2000-2006 Netfilter Core Team
[** 10.634121] ath: EEPROM regdomain: 0x30
[** 10.634123] ath: EEPROM indicates we should expect a direct regpair map
[** 10.634125] ath: Country alpha2 being used: AM
[** 10.634127] ath: Regpair used: 0x30
[** 10.729990] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[** 10.730053] HDA Intel 0000:00:1b.0: setting latency timer to 64
[** 10.732991] phy0: Selected rate control algorithm 'minstrel'
[** 10.733565] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[** 10.733579] cfg80211: Calling CRDA for country: AM
[** 10.856434] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[** 11.330187] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[** 11.330283] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[** 11.330363] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[** 11.330453] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[** 11.330522] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[** 11.330581] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[** 11.330672] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[** 11.410421] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[** 11.410471] HDA Intel 0000:01:00.1: setting latency timer to 64
[** 16.654845] usplash:517 freeing invalid memtype ffffffffd0000000-ffffffffd1000000
[** 17.540251] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[** 17.600090] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[** 17.600968] ADDRCONF(NETDEV_UP): eth0: link is not ready
[** 17.680934] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[** 19.150915] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[** 19.150919] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[** 19.151907] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready