FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Ubuntu > Ubuntu User

 
 
LinkBack Thread Tools
 
Old 02-07-2009, 10:13 PM
kirk abbott
 
Default Sound no longer works

Hello,

For reasons not yet known, sound is no longer functioning. I am currently working with 8.04 and clicking on the sound icon gets the following message:

"The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured."

Anybody have any ideas on what I should be looking at or for?

Kirk




--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 
Old 02-08-2009, 03:42 PM
Nigel Henry
 
Default Sound no longer works

On Sunday 08 February 2009 00:13, kirk abbott wrote:
> Hello,
>
> For reasons not yet known, sound is no longer functioning. I am currently
> working with 8.04 and clicking on the sound icon gets the following
> message:
>
> "The volume control did not find any elements and/or devices to control.
> This means either that you don't have the right GStreamer plugins
> installed, or that you don't have a sound card configured."
>
> Anybody have any ideas on what I should be looking at or for?
>
> Kirk

Hi Kirk.

Have you just upgraded to Hardy 8.0.4, or was the sound working, but has just
stopped?

My Hardy install is Kubuntu, and sounds are ok, and pulseaudio doesn't enter
the equation on Kubuntu, but did you have a whole bunch of updates installed
just before the sound stopped working?

Have you started using a usb device, which is sound related (webcam, usb midi
keyboard, etc). I know on my Debian installs I had problems with my usb midi
keyboard. The usb starts early in the boot sequence, and alsa would detect my
usb midi keyboard as a soundcard, and set it as card0. consequently the
actual soundcard which needed card0, could no longer use it, as the midi
keyboard was using it, which resulted in no soundcard being detected, and no
sounds. If so remove the usb device, and reboot. the fix is easy for this
problem, but later.

Would you post the following output please.

cat /proc/asound/cards
lsmod | grep snd
lspci -vn (just the bit for the soundcard)

If the soundcard is an hda intel one, the following output.
grep ^Codec /proc/asound/card?/codec*

To check alsamixer settings, if the Gnome volume control is lying, open
alsamixer as below for card0, card1, etc, which will bypass the default
opening of alsamixer, where you only get the one pulseaudio control.

alsamixer -D hw:0 (this is for card0)
alsamixer -D hw:1 (for card1)

Are you using the latest Hardy 2.6.24 kernel, or a hand rolled one?
uname -r

Over to you.

Nigel.


--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 
Old 02-08-2009, 03:56 PM
Roger Benham
 
Default Sound no longer works

I constantly have this problem. I always solve it by rebooting.


Reclaim your name @ymail.com or @rocketmail.com.
Get your new email address now!--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 
Old 02-08-2009, 04:01 PM
Masood Ahmed
 
Default Sound no longer works

On Sunday 08 February 2009 22:12:27 Nigel Henry wrote:
>[...]
> To check alsamixer settings, if the Gnome volume control is lying, open
> alsamixer as below for card0, card1, etc, which will bypass the default
> opening of alsamixer, where you only get the one pulseaudio control.
>
> alsamixer -D hw:0 (this is for card0)
> alsamixer -D hw:1 (for card1)
>[...]

Even I remember having same problem sometime back. It happened after an
update. By using alsamixer -D hw:0 command I was able to "unmute" my soundcard
(the update had muted it for some reason). Just using alsamixer return only
pulseaudio which was not muted.

Regards,
Masood Ahmed

--
You can no more win a war than you can win an earthquake.
-- Jeannette Rankin

--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 
Old 02-08-2009, 10:03 PM
kirk abbott
 
Default Sound no longer works

I believe I'm using the most recent kernel, as I don't know enough to handroll my own. And there are no new devices involved. I did try and subsequently remove some movie related applications. Below are the requested outputs:


kirk@me:~$ cat /proc/asound/cards
--- no soundcards ---
kirk@me:~$ lsmod| grep snd
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 1 snd_pcm_oss
snd_seq_dummy 4868 0
snd_seq_oss 35584 0
snd_seq_midi 9376 0
snd_rawmidi 25760 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
snd 56996 9 snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice
soundcore 8800 1 snd
snd_page_alloc 11400 1 snd_pcm
kirk@me:~$ lspci -vn
00:00.0 0600: 8086:2a00 (rev 0c)
Subsystem: 17aa:20b3
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>

00:02.0 0300: 8086:2a02 (rev 0c) (prog-if 00 [VGA controller])
Subsystem: 17aa:20b5
Flags: bus master, fast devsel, latency 0, IRQ 20
Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 1800 [size=8]
Capabilities: <access denied>

00:02.1 0380: 8086:2a03 (rev 0c)
Subsystem: 17aa:20b5
Flags: bus master, fast devsel, latency 0
Memory at f8200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>

00:1a.0 0c03: 8086:2834 (rev 03) (prog-if 00 [UHCI])
Subsystem: 17aa:20aa
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1820 [size=32]

00:1a.1 0c03: 8086:2835 (rev 03) (prog-if 00 [UHCI])
Subsystem: 17aa:20aa
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1840 [size=32]

00:1a.7 0c03: 8086:283a (rev 03) (prog-if 20 [EHCI])
Subsystem: 17aa:20ab
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at fe304800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>

00:1b.0 0403: 8086:284b (rev 03)
Subsystem: 17aa:20ac
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at fe100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>

00:1c.0 0604: 8086:283f (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
Capabilities: <access denied>

00:1c.1 0604: 8086:2841 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dc100000-df6fffff
Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
Capabilities: <access denied>

00:1c.2 0604: 8086:2843 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: fe000000-fe0fffff
Capabilities: <access denied>

00:1c.3 0604: 8086:2845 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000dfb00000-00000000dfbfffff
Capabilities: <access denied>

00:1c.4 0604: 8086:2847 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: 00000000df800000-00000000df8fffff
Capabilities: <access denied>

00:1d.0 0c03: 8086:2830 (rev 03) (prog-if 00 [UHCI])
Subsystem: 17aa:20aa
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 1860 [size=32]

00:1d.1 0c03: 8086:2831 (rev 03) (prog-if 00 [UHCI])
Subsystem: 17aa:20aa
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at 1880 [size=32]

00:1d.2 0c03: 8086:2832 (rev 03) (prog-if 00 [UHCI])
Subsystem: 17aa:20aa
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 18a0 [size=32]

00:1d.7 0c03: 8086:2836 (rev 03) (prog-if 20 [EHCI])
Subsystem: 17aa:20ab
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fe304c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>

00:1e.0 0604: 8086:2448 (rev f3) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00006000-00009fff
Memory behind bridge: f8300000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff
Capabilities: <access denied>

00:1f.0 0601: 8086:2815 (rev 03)
Subsystem: 17aa:20a5
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>

00:1f.1 0101: 8086:2850 (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: 17aa:20a6
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 1810 [size=16]

00:1f.2 0106: 8086:2829 (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: 17aa:20a7
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 218
I/O ports at 1c00 [size=8]
I/O ports at 18d4 [size=4]
I/O ports at 18d8 [size=8]
I/O ports at 18d0 [size=4]
I/O ports at 18e0 [size=32]
Memory at fe304000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>

00:1f.3 0c05: 8086:283e (rev 03)
Subsystem: 17aa:20a9
Flags: medium devsel, IRQ 11
Memory at fe305000 (32-bit, non-prefetchable) [size=256]
I/O ports at 1c20 [size=32]

03:00.0 0280: 8086:4227 (rev 02)
Subsystem: 8086:1010
Flags: bus master, fast devsel, latency 0, IRQ 216
Memory at df6ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>

04:00.0 0200: 14e4:1693 (rev 02)
Subsystem: 17aa:20d5
Flags: bus master, fast devsel, latency 0, IRQ 217
Memory at fe000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>

15:00.0 0607: 1180:0476 (rev ba)
Subsystem: 17aa:20c6
Flags: bus master, medium devsel, latency 168, IRQ 20
Memory at f8300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: f4000000-f7fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00006000-000060ff
I/O window 1: 00006400-000064ff
16-bit legacy interface ports at 0001

15:00.1 0c00: 1180:0832 (rev 04) (prog-if 10 [OHCI])
Subsystem: 17aa:20c7
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at f8301000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>

15:00.2 0805: 1180:0822 (rev 21)
Subsystem: 17aa:20c8
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at f8301800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

15:00.3 0880: 1180:0843 (rev 11)
Subsystem: 17aa:20c9
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at f8301c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

15:00.4 0880: 1180:0592 (rev 11)
Subsystem: 17aa:20ca
Flags: medium devsel, IRQ 11
Memory at f8302000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

15:00.5 0880: 1180:0852 (rev 11)
Subsystem: 17aa:20cb
Flags: medium devsel, IRQ 11
Memory at f8302400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>



--- On Sun, 2/8/09, Nigel Henry <cave.dnb2m97pp@aliceadsl.fr> wrote:

> From: Nigel Henry <cave.dnb2m97pp@aliceadsl.fr>
> Subject: Re: Sound no longer works
> To: kirkabbott@yahoo.com, "Ubuntu user technical support, not for general discussions" <ubuntu-users@lists.ubuntu.com>
> Date: Sunday, February 8, 2009, 8:42 AM
> On Sunday 08 February 2009 00:13, kirk abbott wrote:
> > Hello,
> >
> > For reasons not yet known, sound is no longer
> functioning. I am currently
> > working with 8.04 and clicking on the sound icon gets
> the following
> > message:
> >
> > "The volume control did not find any elements
> and/or devices to control.
> > This means either that you don't have the right
> GStreamer plugins
> > installed, or that you don't have a sound card
> configured."
> >
> > Anybody have any ideas on what I should be looking at
> or for?
> >
> > Kirk
>
> Hi Kirk.
>
> Have you just upgraded to Hardy 8.0.4, or was the sound
> working, but has just
> stopped?
>
> My Hardy install is Kubuntu, and sounds are ok, and
> pulseaudio doesn't enter
> the equation on Kubuntu, but did you have a whole bunch of
> updates installed
> just before the sound stopped working?
>
> Have you started using a usb device, which is sound related
> (webcam, usb midi
> keyboard, etc). I know on my Debian installs I had problems
> with my usb midi
> keyboard. The usb starts early in the boot sequence, and
> alsa would detect my
> usb midi keyboard as a soundcard, and set it as card0.
> consequently the
> actual soundcard which needed card0, could no longer use
> it, as the midi
> keyboard was using it, which resulted in no soundcard being
> detected, and no
> sounds. If so remove the usb device, and reboot. the fix is
> easy for this
> problem, but later.
>
> Would you post the following output please.
>
> cat /proc/asound/cards
> lsmod | grep snd
> lspci -vn (just the bit for the soundcard)
>
> If the soundcard is an hda intel one, the following output.
> grep ^Codec /proc/asound/card?/codec*
>
> To check alsamixer settings, if the Gnome volume control is
> lying, open
> alsamixer as below for card0, card1, etc, which will bypass
> the default
> opening of alsamixer, where you only get the one pulseaudio
> control.
>
> alsamixer -D hw:0 (this is for card0)
> alsamixer -D hw:1 (for card1)
>
> Are you using the latest Hardy 2.6.24 kernel, or a hand
> rolled one?
> uname -r
>
> Over to you.
>
> Nigel.
>
>
> --
> ubuntu-users mailing list
> ubuntu-users@lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-users




--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 
Old 02-08-2009, 11:16 PM
kirk abbott
 
Default Sound no longer works

Looks like Nigel closer to the problem than I thought. While I didn't have a conflicting USB installed, I did have the driver for it installed. The Laptop comes with a Conexant HD Audio card built-in. What I had tried to use earlier was a USB Modem using another Conexant driver. Knowing that I had a Conexant sound card, I went looking for Conexant drivers and found that I had one installed for an USB Modem. I was never able to get the modem working, and remembering what Nigel had written regarding USB devices, I uninstalled the device driver. After rebooting, everything started working again.

All I can say is,

Thanks Nigel.



Kirk Abbott


--- On Sun, 2/8/09, Nigel Henry <cave.dnb2m97pp@aliceadsl.fr> wrote:

> From: Nigel Henry <cave.dnb2m97pp@aliceadsl.fr>
> Subject: Re: Sound no longer works
> To: kirkabbott@yahoo.com, "Ubuntu user technical support, not for general discussions" <ubuntu-users@lists.ubuntu.com>
> Date: Sunday, February 8, 2009, 8:42 AM
> On Sunday 08 February 2009 00:13, kirk abbott wrote:
> > Hello,
> >
> > For reasons not yet known, sound is no longer
> functioning. I am currently
> > working with 8.04 and clicking on the sound icon gets
> the following
> > message:
> >
> > "The volume control did not find any elements
> and/or devices to control.
> > This means either that you don't have the right
> GStreamer plugins
> > installed, or that you don't have a sound card
> configured."
> >
> > Anybody have any ideas on what I should be looking at
> or for?
> >
> > Kirk
>
> Hi Kirk.
>
> Have you just upgraded to Hardy 8.0.4, or was the sound
> working, but has just
> stopped?
>
> My Hardy install is Kubuntu, and sounds are ok, and
> pulseaudio doesn't enter
> the equation on Kubuntu, but did you have a whole bunch of
> updates installed
> just before the sound stopped working?
>
> Have you started using a usb device, which is sound related
> (webcam, usb midi
> keyboard, etc). I know on my Debian installs I had problems
> with my usb midi
> keyboard. The usb starts early in the boot sequence, and
> alsa would detect my
> usb midi keyboard as a soundcard, and set it as card0.
> consequently the
> actual soundcard which needed card0, could no longer use
> it, as the midi
> keyboard was using it, which resulted in no soundcard being
> detected, and no
> sounds. If so remove the usb device, and reboot. the fix is
> easy for this
> problem, but later.
>
> Would you post the following output please.
>
> cat /proc/asound/cards
> lsmod | grep snd
> lspci -vn (just the bit for the soundcard)
>
> If the soundcard is an hda intel one, the following output.
> grep ^Codec /proc/asound/card?/codec*
>
> To check alsamixer settings, if the Gnome volume control is
> lying, open
> alsamixer as below for card0, card1, etc, which will bypass
> the default
> opening of alsamixer, where you only get the one pulseaudio
> control.
>
> alsamixer -D hw:0 (this is for card0)
> alsamixer -D hw:1 (for card1)
>
> Are you using the latest Hardy 2.6.24 kernel, or a hand
> rolled one?
> uname -r
>
> Over to you.
>
> Nigel.
>
>
> --
> ubuntu-users mailing list
> ubuntu-users@lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-users




--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 
Old 02-08-2009, 11:22 PM
Nigel Henry
 
Default Sound no longer works

On Monday 09 February 2009 00:03, kirk abbott wrote:
> I believe I'm using the most recent kernel, as I don't know enough to
> handroll my own. And there are no new devices involved. I did try and
> subsequently remove some movie related applications. Below are the
> requested outputs:
>
>
> kirk@me:~$ cat /proc/asound/cards
> --- no soundcards ---

The fact that no soundcards are detected is no surprise, as your lsmod output
below shows that the driver/module for the soundcard is not loaded. the lspci
-vn output is all a bit vague, and there is no indication as to which is the
soundcard. Normally you see the soundcard identified, and which driver it
uses. Perhaps you'd post the lspci output again, but this time as.
lspci -vvnn . This should give more output.

what machine is your Ubuntu Hardy 8.0.4 installed on? PC/Laptop, make, and
model.

Nigel.
> kirk@me:~$ lsmod| grep snd
> snd_pcm_oss 42144 0
> snd_mixer_oss 17920 1 snd_pcm_oss
> snd_pcm 78596 1 snd_pcm_oss
> snd_seq_dummy 4868 0
> snd_seq_oss 35584 0
> snd_seq_midi 9376 0
> snd_rawmidi 25760 1 snd_seq_midi
> snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
> snd_seq 54224 6
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event snd_timer
> 24836 2 snd_pcm,snd_seq
> snd_seq_device 9612 5
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq snd
> 56996 9
> snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,sn d_seq_oss,snd_rawmidi,snd
>_seq,snd_timer,snd_seq_device soundcore 8800 1 snd
> snd_page_alloc 11400 1 snd_pcm
> kirk@me:~$ lspci -vn
> 00:00.0 0600: 8086:2a00 (rev 0c)
> Subsystem: 17aa:20b3
> Flags: bus master, fast devsel, latency 0
> Capabilities: <access denied>
>
> 00:02.0 0300: 8086:2a02 (rev 0c) (prog-if 00 [VGA controller])
> Subsystem: 17aa:20b5
> Flags: bus master, fast devsel, latency 0, IRQ 20
> Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
> Memory at e0000000 (64-bit, prefetchable) [size=256M]
> I/O ports at 1800 [size=8]
> Capabilities: <access denied>
>
> 00:02.1 0380: 8086:2a03 (rev 0c)
> Subsystem: 17aa:20b5
> Flags: bus master, fast devsel, latency 0
> Memory at f8200000 (64-bit, non-prefetchable) [size=1M]
> Capabilities: <access denied>
>
> 00:1a.0 0c03: 8086:2834 (rev 03) (prog-if 00 [UHCI])
> Subsystem: 17aa:20aa
> Flags: bus master, medium devsel, latency 0, IRQ 16
> I/O ports at 1820 [size=32]
>
> 00:1a.1 0c03: 8086:2835 (rev 03) (prog-if 00 [UHCI])
> Subsystem: 17aa:20aa
> Flags: bus master, medium devsel, latency 0, IRQ 17
> I/O ports at 1840 [size=32]
>
> 00:1a.7 0c03: 8086:283a (rev 03) (prog-if 20 [EHCI])
> Subsystem: 17aa:20ab
> Flags: bus master, medium devsel, latency 0, IRQ 18
> Memory at fe304800 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
>
> 00:1b.0 0403: 8086:284b (rev 03)
> Subsystem: 17aa:20ac
> Flags: bus master, fast devsel, latency 0, IRQ 11
> Memory at fe100000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
>
> 00:1c.0 0604: 8086:283f (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: fc000000-fdffffff
> Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
> Capabilities: <access denied>
>
> 00:1c.1 0604: 8086:2841 (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: dc100000-df6fffff
> Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
> Capabilities: <access denied>
>
> 00:1c.2 0604: 8086:2843 (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> Memory behind bridge: fe000000-fe0fffff
> Capabilities: <access denied>
>
> 00:1c.3 0604: 8086:2845 (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: d8000000-d9ffffff
> Prefetchable memory behind bridge: 00000000dfb00000-00000000dfbfffff
> Capabilities: <access denied>
>
> 00:1c.4 0604: 8086:2847 (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
> I/O behind bridge: 00005000-00005fff
> Memory behind bridge: d4000000-d5ffffff
> Prefetchable memory behind bridge: 00000000df800000-00000000df8fffff
> Capabilities: <access denied>
>
> 00:1d.0 0c03: 8086:2830 (rev 03) (prog-if 00 [UHCI])
> Subsystem: 17aa:20aa
> Flags: bus master, medium devsel, latency 0, IRQ 20
> I/O ports at 1860 [size=32]
>
> 00:1d.1 0c03: 8086:2831 (rev 03) (prog-if 00 [UHCI])
> Subsystem: 17aa:20aa
> Flags: bus master, medium devsel, latency 0, IRQ 22
> I/O ports at 1880 [size=32]
>
> 00:1d.2 0c03: 8086:2832 (rev 03) (prog-if 00 [UHCI])
> Subsystem: 17aa:20aa
> Flags: bus master, medium devsel, latency 0, IRQ 21
> I/O ports at 18a0 [size=32]
>
> 00:1d.7 0c03: 8086:2836 (rev 03) (prog-if 20 [EHCI])
> Subsystem: 17aa:20ab
> Flags: bus master, medium devsel, latency 0, IRQ 23
> Memory at fe304c00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
>
> 00:1e.0 0604: 8086:2448 (rev f3) (prog-if 01 [Subtractive decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
> I/O behind bridge: 00006000-00009fff
> Memory behind bridge: f8300000-fbffffff
> Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff
> Capabilities: <access denied>
>
> 00:1f.0 0601: 8086:2815 (rev 03)
> Subsystem: 17aa:20a5
> Flags: bus master, medium devsel, latency 0
> Capabilities: <access denied>
>
> 00:1f.1 0101: 8086:2850 (rev 03) (prog-if 8a [Master SecP PriP])
> Subsystem: 17aa:20a6
> Flags: bus master, medium devsel, latency 0, IRQ 20
> I/O ports at 01f0 [size=8]
> I/O ports at 03f4 [size=1]
> I/O ports at 0170 [size=8]
> I/O ports at 0374 [size=1]
> I/O ports at 1810 [size=16]
>
> 00:1f.2 0106: 8086:2829 (rev 03) (prog-if 01 [AHCI 1.0])
> Subsystem: 17aa:20a7
> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 218
> I/O ports at 1c00 [size=8]
> I/O ports at 18d4 [size=4]
> I/O ports at 18d8 [size=8]
> I/O ports at 18d0 [size=4]
> I/O ports at 18e0 [size=32]
> Memory at fe304000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
>
> 00:1f.3 0c05: 8086:283e (rev 03)
> Subsystem: 17aa:20a9
> Flags: medium devsel, IRQ 11
> Memory at fe305000 (32-bit, non-prefetchable) [size=256]
> I/O ports at 1c20 [size=32]
>
> 03:00.0 0280: 8086:4227 (rev 02)
> Subsystem: 8086:1010
> Flags: bus master, fast devsel, latency 0, IRQ 216
> Memory at df6ff000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
>
> 04:00.0 0200: 14e4:1693 (rev 02)
> Subsystem: 17aa:20d5
> Flags: bus master, fast devsel, latency 0, IRQ 217
> Memory at fe000000 (64-bit, non-prefetchable) [size=64K]
> Expansion ROM at <ignored> [disabled]
> Capabilities: <access denied>
>
> 15:00.0 0607: 1180:0476 (rev ba)
> Subsystem: 17aa:20c6
> Flags: bus master, medium devsel, latency 168, IRQ 20
> Memory at f8300000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
> Memory window 0: f4000000-f7fff000 (prefetchable)
> Memory window 1: 88000000-8bfff000
> I/O window 0: 00006000-000060ff
> I/O window 1: 00006400-000064ff
> 16-bit legacy interface ports at 0001
>
> 15:00.1 0c00: 1180:0832 (rev 04) (prog-if 10 [OHCI])
> Subsystem: 17aa:20c7
> Flags: bus master, medium devsel, latency 64, IRQ 22
> Memory at f8301000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
>
> 15:00.2 0805: 1180:0822 (rev 21)
> Subsystem: 17aa:20c8
> Flags: bus master, medium devsel, latency 64, IRQ 21
> Memory at f8301800 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
> 15:00.3 0880: 1180:0843 (rev 11)
> Subsystem: 17aa:20c9
> Flags: bus master, medium devsel, latency 0, IRQ 11
> Memory at f8301c00 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
> 15:00.4 0880: 1180:0592 (rev 11)
> Subsystem: 17aa:20ca
> Flags: medium devsel, IRQ 11
> Memory at f8302000 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
> 15:00.5 0880: 1180:0852 (rev 11)
> Subsystem: 17aa:20cb
> Flags: medium devsel, IRQ 11
> Memory at f8302400 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
> --- On Sun, 2/8/09, Nigel Henry <cave.dnb2m97pp@aliceadsl.fr> wrote:
> > From: Nigel Henry <cave.dnb2m97pp@aliceadsl.fr>
> > Subject: Re: Sound no longer works
> > To: kirkabbott@yahoo.com, "Ubuntu user technical support, not for general
> > discussions" <ubuntu-users@lists.ubuntu.com> Date: Sunday, February 8,
> > 2009, 8:42 AM
> >
> > On Sunday 08 February 2009 00:13, kirk abbott wrote:
> > > Hello,
> > >
> > > For reasons not yet known, sound is no longer
> >
> > functioning. I am currently
> >
> > > working with 8.04 and clicking on the sound icon gets
> >
> > the following
> >
> > > message:
> > >
> > > "The volume control did not find any elements
> >
> > and/or devices to control.
> >
> > > This means either that you don't have the right
> >
> > GStreamer plugins
> >
> > > installed, or that you don't have a sound card
> >
> > configured."
> >
> > > Anybody have any ideas on what I should be looking at
> >
> > or for?
> >
> > > Kirk
> >
> > Hi Kirk.
> >
> > Have you just upgraded to Hardy 8.0.4, or was the sound
> > working, but has just
> > stopped?
> >
> > My Hardy install is Kubuntu, and sounds are ok, and
> > pulseaudio doesn't enter
> > the equation on Kubuntu, but did you have a whole bunch of
> > updates installed
> > just before the sound stopped working?
> >
> > Have you started using a usb device, which is sound related
> > (webcam, usb midi
> > keyboard, etc). I know on my Debian installs I had problems
> > with my usb midi
> > keyboard. The usb starts early in the boot sequence, and
> > alsa would detect my
> > usb midi keyboard as a soundcard, and set it as card0.
> > consequently the
> > actual soundcard which needed card0, could no longer use
> > it, as the midi
> > keyboard was using it, which resulted in no soundcard being
> > detected, and no
> > sounds. If so remove the usb device, and reboot. the fix is
> > easy for this
> > problem, but later.
> >
> > Would you post the following output please.
> >
> > cat /proc/asound/cards
> > lsmod | grep snd
> > lspci -vn (just the bit for the soundcard)
> >
> > If the soundcard is an hda intel one, the following output.
> > grep ^Codec /proc/asound/card?/codec*
> >
> > To check alsamixer settings, if the Gnome volume control is
> > lying, open
> > alsamixer as below for card0, card1, etc, which will bypass
> > the default
> > opening of alsamixer, where you only get the one pulseaudio
> > control.
> >
> > alsamixer -D hw:0 (this is for card0)
> > alsamixer -D hw:1 (for card1)
> >
> > Are you using the latest Hardy 2.6.24 kernel, or a hand
> > rolled one?
> > uname -r
> >
> > Over to you.
> >
> > Nigel.
> >
> >
> > --
> > ubuntu-users mailing list
> > ubuntu-users@lists.ubuntu.com
> > Modify settings or unsubscribe at:
> > https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 

Thread Tools




All times are GMT. The time now is 12:20 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org