FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Ubuntu > Ubuntu User

 
 
LinkBack Thread Tools
 
Old 12-20-2008, 03:20 PM
 
Default /usr/sbin/lsusb: Novatel device stops responding

X-Mailer: reportbug 3.39ubuntu3
Date: Sat, 20 Dec 2008 10:14:38 -0600

Package: usbutils
Version: 0.73-5ubuntu2
Severity: normal
File: /usr/sbin/lsusb



-- System Information:
Debian Release: lenny/sid
APT prefers hardy-updates
APT policy: (500, 'hardy-updates'), (500, 'hardy-security'), (500, 'hardy')
Architecture: i386 (i686)

Kernel: Linux 2.6.24-22-generic (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages usbutils depends on:
ii libc6 2.7-10ubuntu4 GNU C Library: Shared libraries
ii libusb-0.1-4 2:0.1.12-8 userspace USB programming library
ii zlib1g 1:1.2.3.3.dfsg-7ubuntu1 compression library - runtime

usbutils recommends no packages.

-- no debconf information
A Novatel (Sprint Wireless) U727 USB data device. The device is
configured as modem (using KPPP). The device will work
two or three connections. Then, will stop responding to commands.
During the problem phase, when 'connect' is clicked
within KPPP, it reports "cannot find /dev/ttyUSB0". At this point,
FORCE QUIT is the only way out of KPPP.


Pulling the USB device and reinserting it does not resolve the issue.

The command lsusb does not list the device:
<Snip>
jima@jima-laptop:~$ lsusb
Bus 005 Device 017: ID 0fca:8004 Research In Motion, Ltd.
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics
Fingerprint Reader

Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 014: ID 1410:4100
Bus 001 Device 001: ID 0000:0000
<End Snip>
Issuing the command "sudo modprobe -r usbserial" yields the following
response.

FATAL: Module usbserial is in use.

The comamnd "sudo modprobe usbserial vendor=0x1410 product=0x2110"
does not seem to generate a usable port.


Oddly, if the Gnome GUI logout tool is used, Gnome menus stop
responding. Switching to console and killing the process
associated with tty7 restarts X. Restarting X DOES allow the USB
Sprint Novatel U727 to be usable again in KPPP.


Info:
uname -a
Linux jima-laptop 2.6.24-22-generic #1 SMP Mon Nov 24 18:32:42 UTC
2008 i686 GNU/Linux


lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 8.04.1
Release: 8.04
Codename: hardy

lsusb -v

Bus 005 Device 017: ID 0fca:8004 Research In Motion, Ltd.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0fca Research In Motion, Ltd.
idProduct 0x8004
bcdDevice 2.01
iManufacturer 1
iProduct 5
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 97
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 8
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 255
iInterface 2
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x09 EP 9 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0b EP 11 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8c EP 12 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0f EP 15 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 005 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
can't get hub descriptor: Operation not permitted
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics
Fingerprint Reader

Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0483 SGS Thomson Microelectronics
idProduct 0x2016 Fingerprint Reader
bcdDevice 0.01
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 20
cannot read device status, Operation not permitted (1)

Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 001 Device 015: ID 1410:5010
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1410
idProduct 0x5010
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
cannot read device status, Operation not permitted (1)

Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)


dmesg (tail)
[ 3173.517536] usb 1-1: USB disconnect, address 13
[ 3173.904163] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.904198] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.906816] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.906852] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.908290] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.908320] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.909632] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.909663] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.912093] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.912125] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.913373] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3173.913402] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 3174.536759] usb 1-1: new full speed USB device using uhci_hcd and
address 14

[ 3174.546763] usb 1-1: configuration #1 chosen from 1 choice
[ 3174.551394] option 1-1:1.0: airprime converter detected
[ 3174.551547] usb 1-1: airprime converter now attached to ttyUSB0
[ 3174.551638] usb 1-1: airprime converter now attached to ttyUSB1
[ 3174.551728] usb 1-1: airprime converter now attached to ttyUSB2
[ 3174.554074] option 1-1:1.1: airprime converter detected
[ 3174.554173] usb 1-1: airprime converter now attached to ttyUSB3
[ 3174.554259] usb 1-1: airprime converter now attached to ttyUSB4
[ 3174.554346] usb 1-1: airprime converter now attached to ttyUSB5
[ 3174.556802] option 1-1:1.2: airprime converter detected
[ 3174.556914] usb 1-1: airprime converter now attached to ttyUSB6
[ 3174.557005] usb 1-1: airprime converter now attached to ttyUSB7
[ 3174.557114] usb 1-1: airprime converter now attached to ttyUSB8
[ 3174.559029] option 1-1:1.3: airprime converter detected
[ 3174.559138] usb 1-1: airprime converter now attached to ttyUSB9
[ 3174.559227] usb 1-1: airprime converter now attached to ttyUSB10
[ 3174.559315] usb 1-1: airprime converter now attached to ttyUSB11
[ 3174.600361] scsi19 : SCSI emulation for USB Mass Storage devices
[ 3174.612949] usb-storage: device found at 14
[ 3174.612953] usb-storage: waiting for device to settle before scanning
[ 3175.797224] usb-storage: device scan complete
[ 3175.800504] scsi 19:0:0:0: Direct-Access Novatel MMC Storage
2.31 PQ: 0 ANSI: 2

[ 3175.806224] sd 19:0:0:0: [sdc] Attached SCSI removable disk
[ 3175.806296] sd 19:0:0:0: Attached scsi generic sg3 type 0
[ 5054.526113] usb 1-1: USB disconnect, address 14
[ 5054.526684] airprime ttyUSB0: airprime converter now disconnected
from ttyUSB0
[ 5054.526865] airprime ttyUSB1: airprime converter now disconnected
from ttyUSB1
[ 5054.527033] airprime ttyUSB2: airprime converter now disconnected
from ttyUSB2

[ 5054.527057] option 1-1:1.0: device disconnected
[ 5054.527582] airprime ttyUSB3: airprime converter now disconnected
from ttyUSB3
[ 5054.528841] airprime ttyUSB4: airprime converter now disconnected
from ttyUSB4
[ 5054.529018] airprime ttyUSB5: airprime converter now disconnected
from ttyUSB5

[ 5054.529041] option 1-1:1.1: device disconnected
[ 5054.529387] airprime ttyUSB6: airprime converter now disconnected
from ttyUSB6
[ 5054.529551] airprime ttyUSB7: airprime converter now disconnected
from ttyUSB7
[ 5054.529712] airprime ttyUSB8: airprime converter now disconnected
from ttyUSB8

[ 5054.529734] option 1-1:1.2: device disconnected
[ 5054.530122] airprime ttyUSB9: airprime converter now disconnected
from ttyUSB9
[ 5054.530285] airprime ttyUSB10: airprime converter now disconnected
from ttyUSB10
[ 5054.530446] airprime ttyUSB11: airprime converter now disconnected
from ttyUSB11

[ 5054.530469] option 1-1:1.3: device disconnected
[ 5055.138141] usb 1-1: new full speed USB device using uhci_hcd and
address 15

[ 5055.156025] usb 1-1: configuration #1 chosen from 1 choice
[ 5055.164524] scsi20 : SCSI emulation for USB Mass Storage devices
[ 5055.165889] usb-storage: device found at 15
[ 5055.165895] usb-storage: waiting for device to settle before scanning
[ 5056.150831] usb-storage: device scan complete
[ 5056.154139] scsi 20:0:0:0: CD-ROM Novatel Mass Storage
1.00 PQ: 0 ANSI: 2

[ 5056.205057] sr1: scsi-1 drive
[ 5056.205146] sr 20:0:0:0: Attached scsi CD-ROM sr1
[ 5056.205214] sr 20:0:0:0: Attached scsi generic sg3 type 5
[ 5118.934143] usb 1-1: USB disconnect, address 15
[ 5119.792079] usb 1-1: new full speed USB device using uhci_hcd and
address 16

[ 5119.803410] usb 1-1: configuration #1 chosen from 1 choice
[ 5119.806317] option 1-1:1.0: airprime converter detected
[ 5119.806455] usb 1-1: airprime converter now attached to ttyUSB0
[ 5119.806924] usb 1-1: airprime converter now attached to ttyUSB1
[ 5119.806996] usb 1-1: airprime converter now attached to ttyUSB2
[ 5119.809399] option 1-1:1.1: airprime converter detected
[ 5119.809473] usb 1-1: airprime converter now attached to ttyUSB3
[ 5119.809538] usb 1-1: airprime converter now attached to ttyUSB4
[ 5119.809605] usb 1-1: airprime converter now attached to ttyUSB5
[ 5119.812030] option 1-1:1.2: airprime converter detected
[ 5119.812132] usb 1-1: airprime converter now attached to ttyUSB6
[ 5119.812200] usb 1-1: airprime converter now attached to ttyUSB7
[ 5119.812280] usb 1-1: airprime converter now attached to ttyUSB8
[ 5119.814946] option 1-1:1.3: airprime converter detected
[ 5119.815033] usb 1-1: airprime converter now attached to ttyUSB9
[ 5119.815100] usb 1-1: airprime converter now attached to ttyUSB10
[ 5119.815166] usb 1-1: airprime converter now attached to ttyUSB11
[ 5119.840943] scsi21 : SCSI emulation for USB Mass Storage devices
[ 5119.849057] usb-storage: device found at 16
[ 5119.849060] usb-storage: waiting for device to settle before scanning
[ 5121.703628] usb-storage: device scan complete
[ 5121.706908] scsi 21:0:0:0: Direct-Access Novatel MMC Storage
2.31 PQ: 0 ANSI: 2

[ 5121.712623] sd 21:0:0:0: [sdc] Attached SCSI removable disk
[ 5121.712692] sd 21:0:0:0: Attached scsi generic sg3 type 0

tail /var/log/messages
Dec 20 10:02:13 jima-laptop kernel: [ 5054.526113] usb 1-1: USB
disconnect, address 14
Dec 20 10:02:13 jima-laptop kernel: [ 5054.526684] airprime ttyUSB0:
airprime converter now disconnected from ttyUSB0
Dec 20 10:02:13 jima-laptop kernel: [ 5054.526865] airprime ttyUSB1:
airprime converter now disconnected from ttyUSB1
Dec 20 10:02:13 jima-laptop kernel: [ 5054.527033] airprime ttyUSB2:
airprime converter now disconnected from ttyUSB2
Dec 20 10:02:13 jima-laptop kernel: [ 5054.527057] option 1-1:1.0:
device disconnected
Dec 20 10:02:13 jima-laptop kernel: [ 5054.527582] airprime ttyUSB3:
airprime converter now disconnected from ttyUSB3
Dec 20 10:02:13 jima-laptop kernel: [ 5054.528841] airprime ttyUSB4:
airprime converter now disconnected from ttyUSB4
Dec 20 10:02:13 jima-laptop kernel: [ 5054.529018] airprime ttyUSB5:
airprime converter now disconnected from ttyUSB5
Dec 20 10:02:13 jima-laptop kernel: [ 5054.529041] option 1-1:1.1:
device disconnected
Dec 20 10:02:13 jima-laptop kernel: [ 5054.529387] airprime ttyUSB6:
airprime converter now disconnected from ttyUSB6
Dec 20 10:02:13 jima-laptop kernel: [ 5054.529551] airprime ttyUSB7:
airprime converter now disconnected from ttyUSB7
Dec 20 10:02:13 jima-laptop kernel: [ 5054.529712] airprime ttyUSB8:
airprime converter now disconnected from ttyUSB8
Dec 20 10:02:13 jima-laptop kernel: [ 5054.529734] option 1-1:1.2:
device disconnected
Dec 20 10:02:13 jima-laptop kernel: [ 5054.530122] airprime ttyUSB9:
airprime converter now disconnected from ttyUSB9
Dec 20 10:02:13 jima-laptop kernel: [ 5054.530285] airprime ttyUSB10:
airprime converter now disconnected from ttyUSB10
Dec 20 10:02:13 jima-laptop kernel: [ 5054.530446] airprime ttyUSB11:
airprime converter now disconnected from ttyUSB11
Dec 20 10:02:13 jima-laptop kernel: [ 5054.530469] option 1-1:1.3:
device disconnected
Dec 20 10:02:18 jima-laptop kernel: [ 5055.138141] usb 1-1: new full
speed USB device using uhci_hcd and address 15
Dec 20 10:02:18 jima-laptop kernel: [ 5055.156025] usb 1-1:
configuration #1 chosen from 1 choice
Dec 20 10:02:18 jima-laptop kernel: [ 5055.164524] scsi20 : SCSI
emulation for USB Mass Storage devices
Dec 20 10:02:23 jima-laptop kernel: [ 5056.154139] scsi 20:0:0:0:
CD-ROM Novatel Mass Storage 1.00 PQ: 0

ANSI: 2
Dec 20 10:02:23 jima-laptop kernel: [ 5056.205057] sr1: scsi-1 drive
Dec 20 10:02:23 jima-laptop kernel: [ 5056.205214] sr 20:0:0:0:
Attached scsi generic sg3 type 5
Dec 20 10:08:46 jima-laptop kernel: [ 5118.934143] usb 1-1: USB
disconnect, address 15
Dec 20 10:08:47 jima-laptop kernel: [ 5119.792079] usb 1-1: new full
speed USB device using uhci_hcd and address 16
Dec 20 10:08:48 jima-laptop kernel: [ 5119.803410] usb 1-1:
configuration #1 chosen from 1 choice
Dec 20 10:08:48 jima-laptop kernel: [ 5119.806317] option 1-1:1.0:
airprime converter detected
Dec 20 10:08:48 jima-laptop kernel: [ 5119.806455] usb 1-1: airprime
converter now attached to ttyUSB0
Dec 20 10:08:48 jima-laptop kernel: [ 5119.806924] usb 1-1: airprime
converter now attached to ttyUSB1
Dec 20 10:08:48 jima-laptop kernel: [ 5119.806996] usb 1-1: airprime
converter now attached to ttyUSB2
Dec 20 10:08:48 jima-laptop kernel: [ 5119.809399] option 1-1:1.1:
airprime converter detected
Dec 20 10:08:48 jima-laptop kernel: [ 5119.809473] usb 1-1: airprime
converter now attached to ttyUSB3
Dec 20 10:08:48 jima-laptop kernel: [ 5119.809538] usb 1-1: airprime
converter now attached to ttyUSB4
Dec 20 10:08:48 jima-laptop kernel: [ 5119.809605] usb 1-1: airprime
converter now attached to ttyUSB5
Dec 20 10:08:48 jima-laptop kernel: [ 5119.812030] option 1-1:1.2:
airprime converter detected
Dec 20 10:08:48 jima-laptop kernel: [ 5119.812132] usb 1-1: airprime
converter now attached to ttyUSB6
Dec 20 10:08:48 jima-laptop kernel: [ 5119.812200] usb 1-1: airprime
converter now attached to ttyUSB7
Dec 20 10:08:48 jima-laptop kernel: [ 5119.812280] usb 1-1: airprime
converter now attached to ttyUSB8
Dec 20 10:08:48 jima-laptop kernel: [ 5119.814946] option 1-1:1.3:
airprime converter detected
Dec 20 10:08:48 jima-laptop kernel: [ 5119.815033] usb 1-1: airprime
converter now attached to ttyUSB9
Dec 20 10:08:48 jima-laptop kernel: [ 5119.815100] usb 1-1: airprime
converter now attached to ttyUSB10
Dec 20 10:08:48 jima-laptop kernel: [ 5119.815166] usb 1-1: airprime
converter now attached to ttyUSB11
Dec 20 10:08:48 jima-laptop kernel: [ 5119.840943] scsi21 : SCSI
emulation for USB Mass Storage devices
Dec 20 10:08:53 jima-laptop kernel: [ 5121.706908] scsi 21:0:0:0:
Direct-Access Novatel MMC Storage 2.31 PQ: 0

ANSI: 2
Dec 20 10:08:53 jima-laptop kernel: [ 5121.712623] sd 21:0:0:0: [sdc]
Attached SCSI removable disk
Dec 20 10:08:53 jima-laptop kernel: [ 5121.712692] sd 21:0:0:0:
Attached scsi generic sg3 type 0


Please advise what I am missing, or what other information you may need.

Smokier
aka
Ubuntu (at) llens (dot) net

--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 

Thread Tools




All times are GMT. The time now is 02:29 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org