FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Ubuntu > Ubuntu Studio User

 
 
LinkBack Thread Tools
 
Old 04-26-2010, 11:14 AM
Fernando Gomes
 
Default Motherboard compatibility - AMD, Intel

Hello all!

I've changed my system due to compatibility problems with
ubuntustudio, but still have similar problems with the new one. Both
have Athlon 64 x2 processors, one has a MSI motherboard, other an
Elite motherboard. With the current 10.04 release (not final) I have
also similar problems (it doesn't even boot this time, after
installing the OS). I remember a previous discussion recommending the
use of Intel processors. So it seems I have to change my motherboard
and CPU again, now for an Intel :-(

What are your recommendations for an inexpensive Intel based
configuration, able to run Ubuntustudio? It must be inexpensive, it
will be my third motherboard and CPU for my homestudio, if it isn't
inexpensive my wife will kill me :-)

I've saw some inexpensive motherboard+cpu bundles, with an ASROCK
G31M-S motherboard and an Intel E3300 CPU, do you think this dual core
celeron has enough power to have some realtime effects running well
(p.e. rackarrack)? And with this hardware should I expect some
compatibility issues with ubuntustudio?

Thanks and best regards

Fernando

--
Ubuntu-Studio-users mailing list
Ubuntu-Studio-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
 
Old 04-29-2010, 07:39 PM
"laurent.bellegarde"
 
Default Motherboard compatibility - AMD, Intel

Hi Fernando

I'm a bit suprised about your troubles.

Here, all the team have never met a AMD based motherboard, and more an
Athlon64 x2 one which wasn't working with Ubuntu Studio !!!

What is exactly your problem ?

I'm sure there is a solution to fix...

Does your computer work with a live Ubuntu CD ?

You can install Ubuntu with a live CD and then upgrade your hard disk
installation by using Internet and asking for all Ubuntu studio packages.

For material, few things,

The best motherboards are Asus and MSI.

Asrock is a trademark of Asus, but with lower quality, usually, not very
solid.

Celeron even in dual core, are very very slower than AMD Athlon 64 x2
processors for multimedia uses under GNU/Linux...

If you still want to buy and Intel plateform, you should take a
motherboard from ASUS + Core2 Duo or better.

The best quality/performances/price is AMD.

Hope it helps,

Laurent
lprod.org

Le 26/04/2010 13:14, Fernando Gomes a écrit :
> Hello all!
>
> I've changed my system due to compatibility problems with
> ubuntustudio, but still have similar problems with the new one. Both
> have Athlon 64 x2 processors, one has a MSI motherboard, other an
> Elite motherboard. With the current 10.04 release (not final) I have
> also similar problems (it doesn't even boot this time, after
> installing the OS). I remember a previous discussion recommending the
> use of Intel processors. So it seems I have to change my motherboard
> and CPU again, now for an Intel :-(
>
> What are your recommendations for an inexpensive Intel based
> configuration, able to run Ubuntustudio? It must be inexpensive, it
> will be my third motherboard and CPU for my homestudio, if it isn't
> inexpensive my wife will kill me :-)
>
> I've saw some inexpensive motherboard+cpu bundles, with an ASROCK
> G31M-S motherboard and an Intel E3300 CPU, do you think this dual core
> celeron has enough power to have some realtime effects running well
> (p.e. rackarrack)? And with this hardware should I expect some
> compatibility issues with ubuntustudio?
>
> Thanks and best regards
>
> Fernando
>
>


--
Ubuntu-Studio-users mailing list
Ubuntu-Studio-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
 
Old 04-29-2010, 09:57 PM
Fernando Gomes
 
Default Motherboard compatibility - AMD, Intel

On Thu, Apr 29, 2010 at 8:39 PM, laurent.bellegarde
<laurent.bellegarde@free.fr> wrote:
> Hi Fernando
>
> I'm a bit suprised about your troubles.
>
> Here, all the team have never met a AMD based motherboard, and more an
> Athlon64 x2 one which wasn't working with Ubuntu Studio !!!
>
> What is exactly your problem ?
>
> I'm sure there is a solution to fix...
>
> Does your computer work with a live Ubuntu CD ?
>
> You can install Ubuntu with a live CD and then upgrade your hard disk
> installation by using Internet and asking for all Ubuntu studio packages.
>
> For material, few things,
>
> The best motherboards are Asus and MSI.
>
> Asrock is a trademark of Asus, but with lower quality, usually, not very
> solid.
>
> Celeron even in dual core, are very very slower than AMD Athlon 64 x2
> processors for multimedia uses under GNU/Linux...
>
> If you still want to buy and Intel plateform, you should take a
> motherboard from ASUS + Core2 Duo or better.
>
> The best quality/performances/price is AMD.
>
> Hope it helps,
>
> Laurent
> lprod.org
>
> Le 26/04/2010 13:14, Fernando Gomes a écrit :

Hi Laurent

Thanks for your answer! The PC I'm trying to use has an MSI
motherboard, I'll check its model and the processor installed
tomorrow. Since there is a final ubuntu 10.04 version now, I'll try to
install it and if it works I'll then install the ubuntustudio packages
as you suggested. With previous ubuntustudio versions there were
lockups during boot if using the realtime kernel. I have best results
downloading the standard kernel, applying the rt patch to it, compile
it and install it, but also had some stability issues (some freezes
from time to time). I'll try with this new version and I'll let you
know

Best regards

Fernando


>> Hello all!
>>
>> I've changed my system due to compatibility problems with
>> ubuntustudio, but still have similar problems with the new one. Both
>> have Athlon 64 x2 processors, one has a MSI motherboard, other an
>> Elite motherboard. With the current 10.04 release (not final) I have
>> also similar problems (it doesn't even boot this time, after
>> installing the OS). I remember a previous discussion recommending the
>> use of Intel processors. So it seems I have to change my motherboard
>> and CPU again, now for an Intel :-(
>>
>> What are your recommendations for an inexpensive Intel based
>> configuration, able to run Ubuntustudio? It must be inexpensive, it
>> will be my third motherboard and CPU for my homestudio, if it isn't
>> inexpensive my wife will kill me :-)
>>
>> I've saw some inexpensive motherboard+cpu bundles, with an ASROCK
>> G31M-S motherboard and an Intel E3300 CPU, do you think this dual core
>> celeron has enough power to have some realtime effects running well
>> (p.e. rackarrack)? And with this hardware should I expect some
>> compatibility issues with ubuntustudio?
>>
>> Thanks and best regards
>>
>> Fernando
>>
>>
>
>
> --
> Ubuntu-Studio-users mailing list
> Ubuntu-Studio-users@lists.ubuntu.com
> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
>

--
Ubuntu-Studio-users mailing list
Ubuntu-Studio-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
 
Old 04-30-2010, 11:23 AM
"laurent.bellegarde"
 
Default Motherboard compatibility - AMD, Intel

Fernando Gomes wrote:
> Hi Laurent
>
> Thanks for your answer! The PC I'm trying to use has an MSI
> motherboard, I'll check its model and the processor installed
> tomorrow. Since there is a final ubuntu 10.04 version now, I'll try to
> install it and if it works I'll then install the ubuntustudio packages
> as you suggested. With previous ubuntustudio versions there were
> lockups during boot if using the realtime kernel. I have best results
> downloading the standard kernel, applying the rt patch to it, compile
> it and install it, but also had some stability issues (some freezes
> from time to time). I'll try with this new version and I'll let you
> know
>
> Best regards
>
> Fernando

Ok, we are waiting for the infos.

Laurent

--
Ubuntu-Studio-users mailing list
Ubuntu-Studio-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
 
Old 05-03-2010, 10:09 AM
Fernando Gomes
 
Default Motherboard compatibility - AMD, Intel

Hi

As promissed, here are some details and the current situation on my
compatibility issues with Ubuntu Studio:

My current motherboard is a MSI K9MM-V/MS-7312 (VIA K8M800 chipset, S3
Graphics Unichrome 2D/3D Graphics), the processor is AMD Athlon 64 X2
Dual Core Processor 3600+ stepping 02, as you can see on the messages
file I've put below. It works flawlessly with Win XP and worked 24/7
since I bought it with Ubuntu (7.10 through 9.10, with standard
kernel). As you recommended I installed Ubuntu 10.04 "standard" (I've
installed the x86 version, not the AMD64) and then installed the
ubuntustudio packages. If I use the standard kernel the PC works as
expected. If I try to boot using the RT kernel it sometimes hangs
during boot saying it didn't find the boot disk, and sometimes it
boots normally, but when using the GUI the mouse starts working in
"slow motion" (sometimes it works in slow motion from the beginning,
sometimes only after some minutes). Even with the mouse working in
"slow motion" the audio applications work on realtime (just tried
Hydrogen using Jack). Sometimes after a few minutes all the gui seems
to freeze but the mouse keeps moving (but I have no feedback from
clicking applications or even trying to alt-tab between them). I'm
sending the messages file after booting with standard kernel, I don't
understand why it has no record for the rt kernel boot on it :-(
I've saw the message "HPET not enabled in BIOS. You might try
hpet=force boot option" and I've tried to force HPET as suggested, in
this case this message disappeared but the problems were similar.
Tonight I'll boot the RT kernel and try to put the dmesg output to file.
Can you point me to some diagnostic that can give any clue to the problem?
Is there any known issue with this chipset, or embedded graphics controller?

Before using this PC in my "home studio" I've used another AMD board
and processor, was a motherboard with an AMD 780G chipset with a AMD
Athlon 64 X2 4000+ processor. It worked very well with ubuntustudio
8.04, with more recent versions had similar problems to those I have
now (slow motion mouse, also some PC freezes - everything including
the mouse freezes, this don't happen with the current pc), the only
way to be able to use more recent ubuntustudio versions was to install
the standard ubuntu, to get a new kernel, to patch it with the RT
patch and to compile it, it then works almost flawlessly (only some
freezes from time to time). Someone here in the list said at that time
that it was better to use Intel platforms, so this was the reason for
my initial question, I don't want to build another PC for my "home
studio" (it will be the third) and have similar problems :-(

May 2 18:59:10 homestudio kernel: [ 0.000000] Initializing cgroup
subsys cpuset
May 2 18:59:10 homestudio kernel: [ 0.000000] Initializing cgroup subsys cpu
May 2 18:59:10 homestudio kernel: [ 0.000000] Linux version
2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu
4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu
2.6.32-21.32-generic 2.6.32.11+drm33.2)
May 2 18:59:10 homestudio kernel: [ 0.000000] KERNEL supported cpus:
May 2 18:59:10 homestudio kernel: [ 0.000000] Intel GenuineIntel
May 2 18:59:10 homestudio kernel: [ 0.000000] AMD AuthenticAMD
May 2 18:59:10 homestudio kernel: [ 0.000000] NSC Geode by NSC
May 2 18:59:10 homestudio kernel: [ 0.000000] Cyrix CyrixInstead
May 2 18:59:10 homestudio kernel: [ 0.000000] Centaur CentaurHauls
May 2 18:59:10 homestudio kernel: [ 0.000000] Transmeta GenuineTMx86
May 2 18:59:10 homestudio kernel: [ 0.000000] Transmeta TransmetaCPU
May 2 18:59:10 homestudio kernel: [ 0.000000] UMC UMC UMC UMC
May 2 18:59:10 homestudio kernel: [ 0.000000] BIOS-provided
physical RAM map:
May 2 18:59:10 homestudio kernel: [ 0.000000] BIOS-e820:
0000000000000000 - 000000000009f400 (usable)
May 2 18:59:10 homestudio kernel: [ 0.000000] BIOS-e820:
000000000009f400 - 00000000000a0000 (reserved)
May 2 18:59:10 homestudio kernel: [ 0.000000] BIOS-e820:
00000000000f0000 - 0000000000100000 (reserved)
May 2 18:59:10 homestudio kernel: [ 0.000000] BIOS-e820:
0000000000100000 - 000000007bef0000 (usable)
May 2 18:59:10 homestudio kernel: [ 0.000000] BIOS-e820:
000000007bef0000 - 000000007bef3000 (ACPI NVS)
May 2 18:59:10 homestudio kernel: [ 0.000000] BIOS-e820:
000000007bef3000 - 000000007bf00000 (ACPI data)
May 2 18:59:10 homestudio kernel: [ 0.000000] BIOS-e820:
00000000fec00000 - 0000000100000000 (reserved)
May 2 18:59:10 homestudio kernel: [ 0.000000] DMI 2.3 present.
May 2 18:59:10 homestudio kernel: [ 0.000000] Phoenix BIOS
detected: BIOS may corrupt low RAM, working around it.
May 2 18:59:10 homestudio kernel: [ 0.000000] last_pfn = 0x7bef0
max_arch_pfn = 0x100000
May 2 18:59:10 homestudio kernel: [ 0.000000] x86 PAT enabled: cpu
0, old 0x7040600070406, new 0x7010600070106
May 2 18:59:10 homestudio kernel: [ 0.000000] Scanning 0 areas for
low memory corruption
May 2 18:59:10 homestudio kernel: [ 0.000000] modified physical RAM map:
May 2 18:59:10 homestudio kernel: [ 0.000000] modified:
0000000000000000 - 0000000000010000 (reserved)
May 2 18:59:10 homestudio kernel: [ 0.000000] modified:
0000000000010000 - 000000000009f400 (usable)
May 2 18:59:10 homestudio kernel: [ 0.000000] modified:
000000000009f400 - 00000000000a0000 (reserved)
May 2 18:59:10 homestudio kernel: [ 0.000000] modified:
00000000000f0000 - 0000000000100000 (reserved)
May 2 18:59:10 homestudio kernel: [ 0.000000] modified:
0000000000100000 - 000000007bef0000 (usable)
May 2 18:59:10 homestudio kernel: [ 0.000000] modified:
000000007bef0000 - 000000007bef3000 (ACPI NVS)
May 2 18:59:10 homestudio kernel: [ 0.000000] modified:
000000007bef3000 - 000000007bf00000 (ACPI data)
May 2 18:59:10 homestudio kernel: [ 0.000000] modified:
00000000fec00000 - 0000000100000000 (reserved)
May 2 18:59:10 homestudio kernel: [ 0.000000] init_memory_mapping:
0000000000000000-00000000377fe000
May 2 18:59:10 homestudio kernel: [ 0.000000] Using x86 segment
limits to approximate NX protection
May 2 18:59:10 homestudio kernel: [ 0.000000] RAMDISK: 37857000 - 37fef22c
May 2 18:59:10 homestudio kernel: [ 0.000000] Allocated new
RAMDISK: 008de000 - 0107622c
May 2 18:59:10 homestudio kernel: [ 0.000000] Move RAMDISK from
0000000037857000 - 0000000037fef22b to 008de000 - 0107622b
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: RSDP 000f78c0
00014 (v00 VIAK8M)
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: RSDT 7bef3040
00030 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: FACP 7bef30c0
00074 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: DSDT 7bef3180
05396 (v01 VIAK8M AWRDACPI 00001000 MSFT 0100000E)
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: FACS 7bef0000 00040
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: SSDT 7bef8640
001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: APIC 7bef8580
00068 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
May 2 18:59:10 homestudio kernel: [ 0.000000] 1094MB HIGHMEM available.
May 2 18:59:10 homestudio kernel: [ 0.000000] 887MB LOWMEM available.
May 2 18:59:10 homestudio kernel: [ 0.000000] mapped low ram: 0 - 377fe000
May 2 18:59:10 homestudio kernel: [ 0.000000] low ram: 0 - 377fe000
May 2 18:59:10 homestudio kernel: [ 0.000000] node 0 low ram:
00000000 - 377fe000
May 2 18:59:10 homestudio kernel: [ 0.000000] node 0 bootmap
00011000 - 00017f00
May 2 18:59:10 homestudio kernel: [ 0.000000] (9 early
reservations) ==> bootmem [0000000000 - 00377fe000]
May 2 18:59:10 homestudio kernel: [ 0.000000] #0 [0000000000 -
0000001000] BIOS data page ==> [0000000000 - 0000001000]
May 2 18:59:10 homestudio kernel: [ 0.000000] #1 [0000001000 -
0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
May 2 18:59:10 homestudio kernel: [ 0.000000] #2 [0000006000 -
0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
May 2 18:59:10 homestudio kernel: [ 0.000000] #3 [0000100000 -
00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
May 2 18:59:10 homestudio kernel: [ 0.000000] #4 [000009f000 -
0000100000] BIOS reserved ==> [000009f000 - 0000100000]
May 2 18:59:10 homestudio kernel: [ 0.000000] #5 [00008da000 -
00008dd0b6] BRK ==> [00008da000 - 00008dd0b6]
May 2 18:59:10 homestudio kernel: [ 0.000000] #6 [0000010000 -
0000011000] PGTABLE ==> [0000010000 - 0000011000]
May 2 18:59:10 homestudio kernel: [ 0.000000] #7 [00008de000 -
000107622c] NEW RAMDISK ==> [00008de000 - 000107622c]
May 2 18:59:10 homestudio kernel: [ 0.000000] #8 [0000011000 -
0000018000] BOOTMAP ==> [0000011000 - 0000018000]
May 2 18:59:10 homestudio kernel: [ 0.000000] found SMP MP-table
at [c00f39a0] f39a0
May 2 18:59:10 homestudio kernel: [ 0.000000] Zone PFN ranges:
May 2 18:59:10 homestudio kernel: [ 0.000000] DMA
0x00000010 -> 0x00001000
May 2 18:59:10 homestudio kernel: [ 0.000000] Normal
0x00001000 -> 0x000377fe
May 2 18:59:10 homestudio kernel: [ 0.000000] HighMem
0x000377fe -> 0x0007bef0
May 2 18:59:10 homestudio kernel: [ 0.000000] Movable zone start
PFN for each node
May 2 18:59:10 homestudio kernel: [ 0.000000] early_node_map[2]
active PFN ranges
May 2 18:59:10 homestudio kernel: [ 0.000000] 0: 0x00000010 ->
0x0000009f
May 2 18:59:10 homestudio kernel: [ 0.000000] 0: 0x00000100 ->
0x0007bef0
May 2 18:59:10 homestudio kernel: [ 0.000000] Using APIC driver default
May 2 18:59:10 homestudio kernel: [ 0.000000] Detected use of
extended apic ids on hypertransport bus
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x00] lapic_id[0x00] enabled)
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x01] lapic_id[0x01] enabled)
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x00] high edge lint[0x1])
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x01] high edge lint[0x1])
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: IOAPIC
(id[0x02] address[0xfec00000] gsi_base[0])
May 2 18:59:10 homestudio kernel: [ 0.000000] IOAPIC[0]: apic_id
2, version 3, address 0xfec00000, GSI 0-23
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: INT_SRC_OVR
(bus 0 bus_irq 0 global_irq 2 dfl dfl)
May 2 18:59:10 homestudio kernel: [ 0.000000] ACPI: INT_SRC_OVR
(bus 0 bus_irq 9 global_irq 9 low level)
May 2 18:59:10 homestudio kernel: [ 0.000000] Using ACPI (MADT)
for SMP configuration information
May 2 18:59:10 homestudio kernel: [ 0.000000] SMP: Allowing 2
CPUs, 0 hotplug CPUs
May 2 18:59:10 homestudio kernel: [ 0.000000] PM: Registered
nosave memory: 000000000009f000 - 00000000000a0000
May 2 18:59:10 homestudio kernel: [ 0.000000] PM: Registered
nosave memory: 00000000000a0000 - 00000000000f0000
May 2 18:59:10 homestudio kernel: [ 0.000000] PM: Registered
nosave memory: 00000000000f0000 - 0000000000100000
May 2 18:59:10 homestudio kernel: [ 0.000000] Allocating PCI
resources starting at 7bf00000 (gap: 7bf00000:82d00000)
May 2 18:59:10 homestudio kernel: [ 0.000000] Booting
paravirtualized kernel on bare hardware
May 2 18:59:10 homestudio kernel: [ 0.000000] NR_CPUS:8
nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
May 2 18:59:10 homestudio kernel: [ 0.000000] PERCPU: Embedded 14
pages/cpu @c2400000 s36024 r0 d21320 u2097152
May 2 18:59:10 homestudio kernel: [ 0.000000] pcpu-alloc: s36024
r0 d21320 u2097152 alloc=1*4194304
May 2 18:59:10 homestudio kernel: [ 0.000000] pcpu-alloc: [0] 0 1
May 2 18:59:10 homestudio kernel: [ 0.000000] Built 1 zonelists in
Zone order, mobility grouping on. Total pages: 503553
May 2 18:59:10 homestudio kernel: [ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic
root=UUID=0392d9da-a24f-410f-b768-2bbb23d4ed2d ro quiet splash
May 2 18:59:10 homestudio kernel: [ 0.000000] PID hash table
entries: 4096 (order: 2, 16384 bytes)
May 2 18:59:10 homestudio kernel: [ 0.000000] Dentry cache hash
table entries: 131072 (order: 7, 524288 bytes)
May 2 18:59:10 homestudio kernel: [ 0.000000] Inode-cache hash
table entries: 65536 (order: 6, 262144 bytes)
May 2 18:59:10 homestudio kernel: [ 0.000000] Enabling fast FPU
save and restore... done.
May 2 18:59:10 homestudio kernel: [ 0.000000] Enabling unmasked
SIMD FPU exception support... done.
May 2 18:59:10 homestudio kernel: [ 0.000000] Initializing CPU#0
May 2 18:59:10 homestudio kernel: [ 0.000000] allocated 10152320
bytes of page_cgroup
May 2 18:59:10 homestudio kernel: [ 0.000000] please try
'cgroup_disable=memory' option if you don't want memory cgroups
May 2 18:59:10 homestudio kernel: [ 0.000000] Initializing HighMem
for node 0 (000377fe:0007bef0)
May 2 18:59:10 homestudio kernel: [ 0.000000] Memory:
1986548k/2030528k available (4673k kernel code, 42596k reserved, 2122k
data, 656k init, 1121224k highmem)
May 2 18:59:10 homestudio kernel: [ 0.000000] virtual kernel memory layout:
May 2 18:59:10 homestudio kernel: [ 0.000000] fixmap :
0xfff1d000 - 0xfffff000 ( 904 kB)
May 2 18:59:10 homestudio kernel: [ 0.000000] pkmap :
0xff800000 - 0xffc00000 (4096 kB)
May 2 18:59:10 homestudio kernel: [ 0.000000] vmalloc :
0xf7ffe000 - 0xff7fe000 ( 120 MB)
May 2 18:59:10 homestudio kernel: [ 0.000000] lowmem :
0xc0000000 - 0xf77fe000 ( 887 MB)
May 2 18:59:10 homestudio kernel: [ 0.000000] .init :
0xc07a3000 - 0xc0847000 ( 656 kB)
May 2 18:59:10 homestudio kernel: [ 0.000000] .data :
0xc0590613 - 0xc07a2e48 (2122 kB)
May 2 18:59:10 homestudio kernel: [ 0.000000] .text :
0xc0100000 - 0xc0590613 (4673 kB)
May 2 18:59:10 homestudio kernel: [ 0.000000] Checking if this
processor honours the WP bit even in supervisor mode...Ok.
May 2 18:59:10 homestudio kernel: [ 0.000000] SLUB: Genslabs=13,
HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
May 2 18:59:10 homestudio kernel: [ 0.000000] Hierarchical RCU
implementation.
May 2 18:59:10 homestudio kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:424
May 2 18:59:10 homestudio kernel: [ 0.000000] Console: colour VGA+ 80x25
May 2 18:59:10 homestudio kernel: [ 0.000000] console [tty0] enabled
May 2 18:59:10 homestudio kernel: [ 0.000000] Fast TSC calibration using PIT
May 2 18:59:10 homestudio kernel: [ 0.000000] Detected 2000.039
MHz processor.
May 2 18:59:10 homestudio kernel: [ 0.004005] Calibrating delay
loop (skipped), value calculated using timer frequency.. 4000.07
BogoMIPS (lpj=8000156)
May 2 18:59:10 homestudio kernel: [ 0.004024] Security Framework initialized
May 2 18:59:10 homestudio kernel: [ 0.004047] AppArmor: AppArmor initialized
May 2 18:59:10 homestudio kernel: [ 0.004054] Mount-cache hash
table entries: 512
May 2 18:59:10 homestudio kernel: [ 0.004186] Initializing cgroup subsys ns
May 2 18:59:10 homestudio kernel: [ 0.004190] Initializing cgroup
subsys cpuacct
May 2 18:59:10 homestudio kernel: [ 0.004194] Initializing cgroup
subsys memory
May 2 18:59:10 homestudio kernel: [ 0.004201] Initializing cgroup
subsys devices
May 2 18:59:10 homestudio kernel: [ 0.004204] Initializing cgroup
subsys freezer
May 2 18:59:10 homestudio kernel: [ 0.004207] Initializing cgroup
subsys net_cls
May 2 18:59:10 homestudio kernel: [ 0.004225] CPU: L1 I Cache: 64K
(64 bytes/line), D cache 64K (64 bytes/line)
May 2 18:59:10 homestudio kernel: [ 0.004228] CPU: L2 Cache: 256K
(64 bytes/line)
May 2 18:59:10 homestudio kernel: [ 0.004231] CPU: Physical Processor ID: 0
May 2 18:59:10 homestudio kernel: [ 0.004233] CPU: Processor Core ID: 0
May 2 18:59:10 homestudio kernel: [ 0.004236] mce: CPU supports 5 MCE banks
May 2 18:59:10 homestudio kernel: [ 0.004249] using C1E aware idle routine
May 2 18:59:10 homestudio kernel: [ 0.004257] Performance Events:
AMD PMU driver.
May 2 18:59:10 homestudio kernel: [ 0.004263] ... version: 0
May 2 18:59:10 homestudio kernel: [ 0.004265] ... bit width: 48
May 2 18:59:10 homestudio kernel: [ 0.004267] ... generic registers: 4
May 2 18:59:10 homestudio kernel: [ 0.004269] ... value mask:
0000ffffffffffff
May 2 18:59:10 homestudio kernel: [ 0.004271] ... max period:
00007fffffffffff
May 2 18:59:10 homestudio kernel: [ 0.004273] ... fixed-purpose events: 0
May 2 18:59:10 homestudio kernel: [ 0.004275] ... event mask:
000000000000000f
May 2 18:59:10 homestudio kernel: [ 0.004280] Checking 'hlt'
instruction... OK.
May 2 18:59:10 homestudio kernel: [ 0.022327] ACPI: Core revision 20090903
May 2 18:59:10 homestudio kernel: [ 0.031084] ftrace: converting
mcount calls to 0f 1f 44 00 00
May 2 18:59:10 homestudio kernel: [ 0.031094] ftrace: allocating
21771 entries in 43 pages
May 2 18:59:10 homestudio kernel: [ 0.032099] Enabling APIC mode:
Flat. Using 1 I/O APICs
May 2 18:59:10 homestudio kernel: [ 0.032926] ..TIMER: vector=0x30
apic1=0 pin1=2 apic2=0 pin2=0
May 2 18:59:10 homestudio kernel: [ 0.074464] CPU0: AMD Athlon(tm)
64 X2 Dual Core Processor 3600+ stepping 02
May 2 18:59:10 homestudio kernel: [ 0.076001] Booting processor 1
APIC 0x1 ip 0x6000
May 2 18:59:10 homestudio kernel: [ 0.008000] Initializing CPU#1
May 2 18:59:10 homestudio kernel: [ 0.008000] CPU: L1 I Cache: 64K
(64 bytes/line), D cache 64K (64 bytes/line)
May 2 18:59:10 homestudio kernel: [ 0.008000] CPU: L2 Cache: 256K
(64 bytes/line)
May 2 18:59:10 homestudio kernel: [ 0.008000] CPU: Physical Processor ID: 0
May 2 18:59:10 homestudio kernel: [ 0.008000] CPU: Processor Core ID: 1
May 2 18:59:10 homestudio kernel: [ 0.160098] CPU1: AMD Athlon(tm)
64 X2 Dual Core Processor 3600+ stepping 02
May 2 18:59:10 homestudio kernel: [ 0.160128] Brought up 2 CPUs
May 2 18:59:10 homestudio kernel: [ 0.160131] Total of 2
processors activated (8000.22 BogoMIPS).
May 2 18:59:10 homestudio kernel: [ 0.160568] devtmpfs: initialized
May 2 18:59:10 homestudio kernel: [ 0.160568] regulator: core version 0.5
May 2 18:59:10 homestudio kernel: [ 0.160568] Time: 18:58:58 Date: 05/02/10
May 2 18:59:10 homestudio kernel: [ 0.160568] NET: Registered
protocol family 16
May 2 18:59:10 homestudio kernel: [ 0.160568] Trying to unpack
rootfs image as initramfs...
May 2 18:59:10 homestudio kernel: [ 0.160568] EISA bus registered
May 2 18:59:10 homestudio kernel: [ 0.160568] ACPI: bus type pci registered
May 2 18:59:10 homestudio kernel: [ 0.168934] PCI: PCI BIOS
revision 2.10 entry at 0xfa5d0, last bus=1
May 2 18:59:10 homestudio kernel: [ 0.168937] PCI: Using
configuration type 1 for base access
May 2 18:59:10 homestudio kernel: [ 0.180162] bio: create slab <bio-0> at 0
May 2 18:59:10 homestudio kernel: [ 0.188155] ACPI: Interpreter enabled
May 2 18:59:10 homestudio kernel: [ 0.188168] ACPI: (supports S0 S1 S4 S5)
May 2 18:59:10 homestudio kernel: [ 0.188195] ACPI: Using IOAPIC
for interrupt routing
May 2 18:59:10 homestudio kernel: [ 0.193859] ACPI: No dock devices found.
May 2 18:59:10 homestudio kernel: [ 0.193977] ACPI: PCI Root
Bridge [PCI0] (0000:00)
May 2 18:59:10 homestudio kernel: [ 0.194491] pci 0000:00:10.0:
PME# supported from D0 D1 D2 D3hot D3cold
May 2 18:59:10 homestudio kernel: [ 0.194496] pci 0000:00:10.0:
PME# disabled
May 2 18:59:10 homestudio kernel: [ 0.194561] pci 0000:00:10.1:
PME# supported from D0 D1 D2 D3hot D3cold
May 2 18:59:10 homestudio kernel: [ 0.194566] pci 0000:00:10.1:
PME# disabled
May 2 18:59:10 homestudio kernel: [ 0.194631] pci 0000:00:10.2:
PME# supported from D0 D1 D2 D3hot D3cold
May 2 18:59:10 homestudio kernel: [ 0.194635] pci 0000:00:10.2:
PME# disabled
May 2 18:59:10 homestudio kernel: [ 0.194701] pci 0000:00:10.3:
PME# supported from D0 D1 D2 D3hot D3cold
May 2 18:59:10 homestudio kernel: [ 0.194706] pci 0000:00:10.3:
PME# disabled
May 2 18:59:10 homestudio kernel: [ 0.194774] pci 0000:00:10.4:
PME# supported from D0 D1 D2 D3hot D3cold
May 2 18:59:10 homestudio kernel: [ 0.194778] pci 0000:00:10.4:
PME# disabled
May 2 18:59:10 homestudio kernel: [ 0.194833] HPET not enabled in
BIOS. You might try hpet=force boot option
May 2 18:59:10 homestudio kernel: [ 0.194990] pci 0000:00:12.0:
PME# supported from D0 D1 D2 D3hot D3cold
May 2 18:59:10 homestudio kernel: [ 0.194994] pci 0000:00:12.0:
PME# disabled
May 2 18:59:10 homestudio kernel: [ 0.245084] ACPI: PCI Interrupt
Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
May 2 18:59:10 homestudio kernel: [ 0.245271] ACPI: PCI Interrupt
Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
May 2 18:59:10 homestudio kernel: [ 0.245463] ACPI: PCI Interrupt
Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
May 2 18:59:10 homestudio kernel: [ 0.245636] ACPI: PCI Interrupt
Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
May 2 18:59:10 homestudio kernel: [ 0.245802] ACPI: PCI Interrupt
Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
May 2 18:59:10 homestudio kernel: [ 0.245960] ACPI: PCI Interrupt
Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
May 2 18:59:10 homestudio kernel: [ 0.246118] ACPI: PCI Interrupt
Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
May 2 18:59:10 homestudio kernel: [ 0.246276] ACPI: PCI Interrupt
Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
May 2 18:59:10 homestudio kernel: [ 0.246478] ACPI: PCI Interrupt
Link [ALKA] (IRQs *20)
May 2 18:59:10 homestudio kernel: [ 0.246670] ACPI: PCI Interrupt
Link [ALKB] (IRQs *21)
May 2 18:59:10 homestudio kernel: [ 0.246859] ACPI: PCI Interrupt
Link [ALKC] (IRQs *22)
May 2 18:59:10 homestudio kernel: [ 0.247078] ACPI: PCI Interrupt
Link [ALKD] (IRQs *23)
May 2 18:59:10 homestudio kernel: [ 0.247205] vgaarb: device
added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
May 2 18:59:10 homestudio kernel: [ 0.247208] vgaarb: loaded
May 2 18:59:10 homestudio kernel: [ 0.247331] SCSI subsystem initialized
May 2 18:59:10 homestudio kernel: [ 0.247516] usbcore: registered
new interface driver usbfs
May 2 18:59:10 homestudio kernel: [ 0.247535] usbcore: registered
new interface driver hub
May 2 18:59:10 homestudio kernel: [ 0.247562] usbcore: registered
new device driver usb
May 2 18:59:10 homestudio kernel: [ 0.247714] ACPI: WMI: Mapper loaded
May 2 18:59:10 homestudio kernel: [ 0.247716] PCI: Using ACPI for
IRQ routing
May 2 18:59:10 homestudio kernel: [ 0.247887] NetLabel: Initializing
May 2 18:59:10 homestudio kernel: [ 0.247890] NetLabel: domain
hash size = 128
May 2 18:59:10 homestudio kernel: [ 0.247892] NetLabel: protocols
= UNLABELED CIPSOv4
May 2 18:59:10 homestudio kernel: [ 0.247906] NetLabel: unlabeled
traffic allowed by default
May 2 18:59:10 homestudio kernel: [ 0.249948] AppArmor: AppArmor
Filesystem Enabled
May 2 18:59:10 homestudio kernel: [ 0.249971] pnp: PnP ACPI init
May 2 18:59:10 homestudio kernel: [ 0.249991] ACPI: bus type pnp registered
May 2 18:59:10 homestudio kernel: [ 0.252924] pnp: PnP ACPI: found 9 devices
May 2 18:59:10 homestudio kernel: [ 0.252926] ACPI: ACPI bus type
pnp unregistered
May 2 18:59:10 homestudio kernel: [ 0.252931] PnPBIOS: Disabled by ACPI PNP
May 2 18:59:10 homestudio kernel: [ 0.252943] system 00:00: iomem
range 0xf0000-0xfffff could not be reserved
May 2 18:59:10 homestudio kernel: [ 0.252947] system 00:00: iomem
range 0x7bf00000-0x7bffffff could not be reserved
May 2 18:59:10 homestudio kernel: [ 0.252950] system 00:00: iomem
range 0x7bef0000-0x7befffff could not be reserved
May 2 18:59:10 homestudio kernel: [ 0.252954] system 00:00: iomem
range 0xffff0000-0xffffffff has been reserved
May 2 18:59:10 homestudio kernel: [ 0.252957] system 00:00: iomem
range 0x0-0x9ffff could not be reserved
May 2 18:59:10 homestudio kernel: [ 0.252961] system 00:00: iomem
range 0x100000-0x7beeffff could not be reserved
May 2 18:59:10 homestudio kernel: [ 0.252964] system 00:00: iomem
range 0x7c000000-0x7fffffff has been reserved
May 2 18:59:10 homestudio kernel: [ 0.252968] system 00:00: iomem
range 0xfec00000-0xfec00fff could not be reserved
May 2 18:59:10 homestudio kernel: [ 0.252971] system 00:00: iomem
range 0xfee00000-0xfee00fff has been reserved
May 2 18:59:10 homestudio kernel: [ 0.252975] system 00:00: iomem
range 0xfff80000-0xfffeffff has been reserved
May 2 18:59:10 homestudio kernel: [ 0.252982] system 00:02: ioport
range 0x4000-0x407f has been reserved
May 2 18:59:10 homestudio kernel: [ 0.252985] system 00:02: ioport
range 0x5000-0x500f has been reserved
May 2 18:59:10 homestudio kernel: [ 0.252991] system 00:03: ioport
range 0x4d0-0x4d1 has been reserved
May 2 18:59:10 homestudio kernel: [ 0.252994] system 00:03: ioport
range 0x290-0x297 has been reserved
May 2 18:59:10 homestudio kernel: [ 0.287673] Switching to
clocksource acpi_pm
May 2 18:59:10 homestudio kernel: [ 0.287865] pci 0000:00:01.0:
PCI bridge, secondary bus 0000:01
May 2 18:59:10 homestudio kernel: [ 0.287865] pci 0000:00:01.0:
IO window: disabled
May 2 18:59:10 homestudio kernel: [ 0.287865] pci 0000:00:01.0:
MEM window: 0xf4000000-0xf5ffffff
May 2 18:59:10 homestudio kernel: [ 0.287865] pci 0000:00:01.0:
PREFETCH window: 0xf0000000-0xf3ffffff
May 2 18:59:10 homestudio kernel: [ 0.287865] NET: Registered
protocol family 2
May 2 18:59:10 homestudio kernel: [ 0.287865] IP route cache hash
table entries: 32768 (order: 5, 131072 bytes)
May 2 18:59:10 homestudio kernel: [ 0.287865] TCP established hash
table entries: 131072 (order: 8, 1048576 bytes)
May 2 18:59:10 homestudio kernel: [ 0.287865] TCP bind hash table
entries: 65536 (order: 7, 524288 bytes)
May 2 18:59:10 homestudio kernel: [ 0.287865] TCP: Hash tables
configured (established 131072 bind 65536)
May 2 18:59:10 homestudio kernel: [ 0.287865] TCP reno registered
May 2 18:59:10 homestudio kernel: [ 0.287865] NET: Registered
protocol family 1
May 2 18:59:10 homestudio kernel: [ 0.287865] pci 0000:00:01.0:
disabling DAC on VIA PCI bridge
May 2 18:59:10 homestudio kernel: [ 0.287865] cpufreq-nforce2: No
nForce2 chipset.
May 2 18:59:10 homestudio kernel: [ 0.287865] Scanning for low
memory corruption every 60 seconds
May 2 18:59:10 homestudio kernel: [ 0.287865] audit: initializing
netlink socket (disabled)
May 2 18:59:10 homestudio kernel: [ 0.287865] type=2000
audit(1272826738.284:1): initialized
May 2 18:59:10 homestudio kernel: [ 0.296930] highmem bounce pool
size: 64 pages
May 2 18:59:10 homestudio kernel: [ 0.296936] HugeTLB registered 4
MB page size, pre-allocated 0 pages
May 2 18:59:10 homestudio kernel: [ 0.298464] VFS: Disk quotas dquot_6.5.2
May 2 18:59:10 homestudio kernel: [ 0.298527] Dquot-cache hash
table entries: 1024 (order 0, 4096 bytes)
May 2 18:59:10 homestudio kernel: [ 0.299123] fuse init (API version 7.13)
May 2 18:59:10 homestudio kernel: [ 0.299207] msgmni has been set to 1691
May 2 18:59:10 homestudio kernel: [ 0.299451] alg: No test for stdrng (krng)
May 2 18:59:10 homestudio kernel: [ 0.299515] Block layer SCSI
generic (bsg) driver version 0.4 loaded (major 253)
May 2 18:59:10 homestudio kernel: [ 0.299519] io scheduler noop registered
May 2 18:59:10 homestudio kernel: [ 0.299522] io scheduler
anticipatory registered
May 2 18:59:10 homestudio kernel: [ 0.299524] io scheduler
deadline registered
May 2 18:59:10 homestudio kernel: [ 0.299564] io scheduler cfq
registered (default)
May 2 18:59:10 homestudio kernel: [ 0.299693] pci_hotplug: PCI Hot
Plug PCI Core version: 0.5
May 2 18:59:10 homestudio kernel: [ 0.299720] pciehp: PCI Express
Hot Plug Controller Driver version: 0.4
May 2 18:59:10 homestudio kernel: [ 0.299823] input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
May 2 18:59:10 homestudio kernel: [ 0.299828] ACPI: Power Button [PWRB]
May 2 18:59:10 homestudio kernel: [ 0.299884] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
May 2 18:59:10 homestudio kernel: [ 0.299887] ACPI: Power Button [PWRF]
May 2 18:59:10 homestudio kernel: [ 0.299936] fan PNP0C0B:00:
registered as cooling_device0
May 2 18:59:10 homestudio kernel: [ 0.299942] ACPI: Fan [FAN] (on)
May 2 18:59:10 homestudio kernel: [ 0.300291] processor LNXCPU:00:
registered as cooling_device1
May 2 18:59:10 homestudio kernel: [ 0.300328] processor LNXCPU:01:
registered as cooling_device2
May 2 18:59:10 homestudio kernel: [ 0.303814] thermal LNXTHERM:01:
registered as thermal_zone0
May 2 18:59:10 homestudio kernel: [ 0.303822] ACPI: Thermal Zone
[THRM] (40 C)
May 2 18:59:10 homestudio kernel: [ 0.305411] Serial: 8250/16550
driver, 4 ports, IRQ sharing enabled
May 2 18:59:10 homestudio kernel: [ 0.306732] brd: module loaded
May 2 18:59:10 homestudio kernel: [ 0.307250] loop: module loaded
May 2 18:59:10 homestudio kernel: [ 0.307365] input: Macintosh
mouse button emulation as /devices/virtual/input/input2
May 2 18:59:10 homestudio kernel: [ 0.307817] ACPI: PCI Interrupt
Link [ALKA] enabled at IRQ 20
May 2 18:59:10 homestudio kernel: [ 0.307834] pata_acpi
0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
May 2 18:59:10 homestudio kernel: [ 0.307889] pata_acpi
0000:00:0f.0: PCI INT B disabled
May 2 18:59:10 homestudio kernel: [ 0.307906] pata_acpi
0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
May 2 18:59:10 homestudio kernel: [ 0.307926] pata_acpi
0000:00:0f.1: PCI INT A disabled
May 2 18:59:10 homestudio kernel: [ 0.308296] Fixed MDIO Bus: probed
May 2 18:59:10 homestudio kernel: [ 0.308332] PPP generic driver
version 2.4.2
May 2 18:59:10 homestudio kernel: [ 0.308391] tun: Universal
TUN/TAP device driver, 1.6
May 2 18:59:10 homestudio kernel: [ 0.308393] tun: (C) 1999-2004
Max Krasnyansky <maxk@qualcomm.com>
May 2 18:59:10 homestudio kernel: [ 0.308489] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
May 2 18:59:10 homestudio kernel: [ 0.308734] ACPI: PCI Interrupt
Link [ALKB] enabled at IRQ 21
May 2 18:59:10 homestudio kernel: [ 0.308746] ehci_hcd
0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
May 2 18:59:10 homestudio kernel: [ 0.308762] ehci_hcd
0000:00:10.4: EHCI Host Controller
May 2 18:59:10 homestudio kernel: [ 0.308805] ehci_hcd
0000:00:10.4: new USB bus registered, assigned bus number 1
May 2 18:59:10 homestudio kernel: [ 0.308871] ehci_hcd
0000:00:10.4: irq 21, io mem 0xf6000000
May 2 18:59:10 homestudio kernel: [ 0.308933] isapnp: Scanning for
PnP cards...
May 2 18:59:10 homestudio kernel: [ 0.353234] ehci_hcd
0000:00:10.4: USB 2.0 started, EHCI 1.00
May 2 18:59:10 homestudio kernel: [ 0.353388] usb usb1:
configuration #1 chosen from 1 choice
May 2 18:59:10 homestudio kernel: [ 0.353419] hub 1-0:1.0: USB hub found
May 2 18:59:10 homestudio kernel: [ 0.353431] hub 1-0:1.0: 8 ports detected
May 2 18:59:10 homestudio kernel: [ 0.353499] ohci_hcd: USB 1.1
'Open' Host Controller (OHCI) Driver
May 2 18:59:10 homestudio kernel: [ 0.353518] uhci_hcd: USB
Universal Host Controller Interface driver
May 2 18:59:10 homestudio kernel: [ 0.353570] uhci_hcd
0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
May 2 18:59:10 homestudio kernel: [ 0.353579] uhci_hcd
0000:00:10.0: UHCI Host Controller
May 2 18:59:10 homestudio kernel: [ 0.353617] uhci_hcd
0000:00:10.0: new USB bus registered, assigned bus number 2
May 2 18:59:10 homestudio kernel: [ 0.353642] uhci_hcd
0000:00:10.0: irq 21, io base 0x0000e300
May 2 18:59:10 homestudio kernel: [ 0.353733] usb usb2:
configuration #1 chosen from 1 choice
May 2 18:59:10 homestudio kernel: [ 0.353758] hub 2-0:1.0: USB hub found
May 2 18:59:10 homestudio kernel: [ 0.353765] hub 2-0:1.0: 2 ports detected
May 2 18:59:10 homestudio kernel: [ 0.353809] uhci_hcd
0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
May 2 18:59:10 homestudio kernel: [ 0.353815] uhci_hcd
0000:00:10.1: UHCI Host Controller
May 2 18:59:10 homestudio kernel: [ 0.353844] uhci_hcd
0000:00:10.1: new USB bus registered, assigned bus number 3
May 2 18:59:10 homestudio kernel: [ 0.353864] uhci_hcd
0000:00:10.1: irq 21, io base 0x0000e400
May 2 18:59:10 homestudio kernel: [ 0.353948] usb usb3:
configuration #1 chosen from 1 choice
May 2 18:59:10 homestudio kernel: [ 0.353975] hub 3-0:1.0: USB hub found
May 2 18:59:10 homestudio kernel: [ 0.353982] hub 3-0:1.0: 2 ports detected
May 2 18:59:10 homestudio kernel: [ 0.354025] uhci_hcd
0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
May 2 18:59:10 homestudio kernel: [ 0.354031] uhci_hcd
0000:00:10.2: UHCI Host Controller
May 2 18:59:10 homestudio kernel: [ 0.354061] uhci_hcd
0000:00:10.2: new USB bus registered, assigned bus number 4
May 2 18:59:10 homestudio kernel: [ 0.354079] uhci_hcd
0000:00:10.2: irq 21, io base 0x0000e500
May 2 18:59:10 homestudio kernel: [ 0.354163] usb usb4:
configuration #1 chosen from 1 choice
May 2 18:59:10 homestudio kernel: [ 0.354190] hub 4-0:1.0: USB hub found
May 2 18:59:10 homestudio kernel: [ 0.354199] hub 4-0:1.0: 2 ports detected
May 2 18:59:10 homestudio kernel: [ 0.354242] uhci_hcd
0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
May 2 18:59:10 homestudio kernel: [ 0.354247] uhci_hcd
0000:00:10.3: UHCI Host Controller
May 2 18:59:10 homestudio kernel: [ 0.354280] uhci_hcd
0000:00:10.3: new USB bus registered, assigned bus number 5
May 2 18:59:10 homestudio kernel: [ 0.354299] uhci_hcd
0000:00:10.3: irq 21, io base 0x0000e600
May 2 18:59:10 homestudio kernel: [ 0.354392] usb usb5:
configuration #1 chosen from 1 choice
May 2 18:59:10 homestudio kernel: [ 0.354416] hub 5-0:1.0: USB hub found
May 2 18:59:10 homestudio kernel: [ 0.354423] hub 5-0:1.0: 2 ports detected
May 2 18:59:10 homestudio kernel: [ 0.354504] PNP: PS/2 Controller
[PNP0303:PS2K] at 0x60,0x64 irq 1
May 2 18:59:10 homestudio kernel: [ 0.354507] PNP: PS/2 appears to
have AUX port disabled, if this is incorrect please boot with
i8042.nopnp
May 2 18:59:10 homestudio kernel: [ 0.354701] serio: i8042 KBD
port at 0x60,0x64 irq 1
May 2 18:59:10 homestudio kernel: [ 0.354801] mice: PS/2 mouse
device common for all mice
May 2 18:59:10 homestudio kernel: [ 0.354899] rtc_cmos 00:05: RTC
can wake from S4
May 2 18:59:10 homestudio kernel: [ 0.354935] rtc_cmos 00:05: rtc
core: registered rtc_cmos as rtc0
May 2 18:59:10 homestudio kernel: [ 0.354987] rtc0: alarms up to
one year, y3k, 242 bytes nvram
May 2 18:59:10 homestudio kernel: [ 0.355105] device-mapper:
uevent: version 1.0.3
May 2 18:59:10 homestudio kernel: [ 0.369358] device-mapper:
ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
May 2 18:59:10 homestudio kernel: [ 0.378903] Freeing initrd
memory: 7776k freed
May 2 18:59:10 homestudio kernel: [ 0.401800] device-mapper:
multipath: version 1.1.0 loaded
May 2 18:59:10 homestudio kernel: [ 0.401805] device-mapper:
multipath round-robin: version 1.0.0 loaded
May 2 18:59:10 homestudio kernel: [ 0.401996] EISA: Probing bus 0 at eisa.0
May 2 18:59:10 homestudio kernel: [ 0.402016] Cannot allocate
resource for EISA slot 4
May 2 18:59:10 homestudio kernel: [ 0.402018] Cannot allocate
resource for EISA slot 5
May 2 18:59:10 homestudio kernel: [ 0.402032] EISA: Detected 0 cards.
May 2 18:59:10 homestudio kernel: [ 0.402110] cpuidle: using governor ladder
May 2 18:59:10 homestudio kernel: [ 0.402113] cpuidle: using governor menu
May 2 18:59:10 homestudio kernel: [ 0.402576] TCP cubic registered
May 2 18:59:10 homestudio kernel: [ 0.402730] NET: Registered
protocol family 10
May 2 18:59:10 homestudio kernel: [ 0.403190] lo: Disabled Privacy
Extensions
May 2 18:59:10 homestudio kernel: [ 0.403517] NET: Registered
protocol family 17
May 2 18:59:10 homestudio kernel: [ 0.403559] powernow-k8: Found 1
AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ processors (2 cpu
cores) (version 2.20.00)
May 2 18:59:10 homestudio kernel: [ 0.403606] powernow-k8: 0 :
fid 0xc (2000 MHz), vid 0xc
May 2 18:59:10 homestudio kernel: [ 0.403608] powernow-k8: 1 :
fid 0xa (1800 MHz), vid 0xe
May 2 18:59:10 homestudio kernel: [ 0.403611] powernow-k8: 2 :
fid 0x2 (1000 MHz), vid 0x12
May 2 18:59:10 homestudio kernel: [ 0.416382] input: AT Translated
Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
May 2 18:59:10 homestudio kernel: [ 0.445309] Using IPI No-Shortcut mode
May 2 18:59:10 homestudio kernel: [ 0.445409] registered taskstats version 1
May 2 18:59:10 homestudio kernel: [ 0.445678] Magic number: 10:494:998
May 2 18:59:10 homestudio kernel: [ 0.445721] system 00:00: hash matches
May 2 18:59:10 homestudio kernel: [ 0.445785] rtc_cmos 00:05:
setting system clock to 2010-05-02 18:58:58 UTC (1272826738)
May 2 18:59:10 homestudio kernel: [ 0.445790] BIOS EDD facility
v0.16 2004-Jun-25, 0 devices found
May 2 18:59:10 homestudio kernel: [ 0.445792] EDD information not available.
May 2 18:59:10 homestudio kernel: [ 0.662963] isapnp: No Plug &
Play device found
May 2 18:59:10 homestudio kernel: [ 0.662982] Freeing unused
kernel memory: 656k freed
May 2 18:59:10 homestudio kernel: [ 0.663548] Write protecting the
kernel text: 4676k
May 2 18:59:10 homestudio kernel: [ 0.663587] Write protecting the
kernel read-only data: 1840k
May 2 18:59:10 homestudio kernel: [ 0.685076] udev: starting version 151
May 2 18:59:10 homestudio kernel: [ 0.761722] sata_via
0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
May 2 18:59:10 homestudio kernel: [ 0.761765] sata_via
0000:00:0f.0: routed to hard irq line 11
May 2 18:59:10 homestudio kernel: [ 0.767306] scsi0 : sata_via
May 2 18:59:10 homestudio kernel: [ 0.768967]
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
May 2 18:59:10 homestudio kernel: [ 0.769033] scsi1 : sata_via
May 2 18:59:10 homestudio kernel: [ 0.770752] ata1: SATA max
UDMA/133 cmd 0xe100 ctl 0xe700 bmdma 0xe000 irq 20
May 2 18:59:10 homestudio kernel: [ 0.770756] ata2: SATA max
UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xe008 irq 20
May 2 18:59:10 homestudio kernel: [ 0.770844] pata_via
0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
May 2 18:59:10 homestudio kernel: [ 0.771059] scsi2 : pata_via
May 2 18:59:10 homestudio kernel: [ 0.771126] scsi3 : pata_via
May 2 18:59:10 homestudio kernel: [ 0.772417] ata3: PATA max
UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe200 irq 14
May 2 18:59:10 homestudio kernel: [ 0.772420] ata4: PATA max
UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe208 irq 15
May 2 18:59:10 homestudio kernel: [ 0.772698] ACPI: PCI Interrupt
Link [ALKD] enabled at IRQ 23
May 2 18:59:10 homestudio kernel: [ 0.772714] via-rhine
0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
May 2 18:59:10 homestudio kernel: [ 0.773497] eth0: VIA Rhine II
at 0xf6001000, 00:19:db:45:e5:91, IRQ 23.
May 2 18:59:10 homestudio kernel: [ 0.774206] eth0: MII PHY found
at address 1, status 0x786d advertising 01e1 Link 45e1.
May 2 18:59:10 homestudio kernel: [ 0.964438] ata3.00: ATAPI:
HL-DT-STDVD-RAM GSA-H55N, 1.04, max UDMA/66
May 2 18:59:10 homestudio kernel: [ 0.964464] ata3.00: limited to
UDMA/33 due to 40-wire cable
May 2 18:59:10 homestudio kernel: [ 0.972020] ata1: SATA link up
1.5 Gbps (SStatus 113 SControl 300)
May 2 18:59:10 homestudio kernel: [ 0.980323] ata3.00: configured
for UDMA/33
May 2 18:59:10 homestudio kernel: [ 1.108015] usb 2-1: new full
speed USB device using uhci_hcd and address 2
May 2 18:59:10 homestudio kernel: [ 1.136510] ata1.00: ATA-8: WDC
WD10EADS-00M2B0, 01.00A01, max UDMA/133
May 2 18:59:10 homestudio kernel: [ 1.136514] ata1.00: 1953525168
sectors, multi 16: LBA48 NCQ (depth 0/32)
May 2 18:59:10 homestudio kernel: [ 1.144533] ata1.00: configured
for UDMA/133
May 2 18:59:10 homestudio kernel: [ 1.144665] scsi 0:0:0:0:
Direct-Access ATA WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5
May 2 18:59:10 homestudio kernel: [ 1.144865] sd 0:0:0:0: Attached
scsi generic sg0 type 0
May 2 18:59:10 homestudio kernel: [ 1.144978] sd 0:0:0:0: [sda]
1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
May 2 18:59:10 homestudio kernel: [ 1.145040] sd 0:0:0:0: [sda]
Write Protect is off
May 2 18:59:10 homestudio kernel: [ 1.145067] sd 0:0:0:0: [sda]
Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 2 18:59:10 homestudio kernel: [ 1.145200] sda: sda1 sda2 sda3 sda4
May 2 18:59:10 homestudio kernel: [ 1.176382] sd 0:0:0:0: [sda]
Attached SCSI disk
May 2 18:59:10 homestudio kernel: [ 1.281810] usb 2-1:
configuration #1 chosen from 1 choice
May 2 18:59:10 homestudio kernel: [ 1.348021] ata2: SATA link down
1.5 Gbps (SStatus 0 SControl 300)
May 2 18:59:10 homestudio kernel: [ 1.360106] scsi 2:0:0:0: CD-ROM
HL-DT-ST DVD-RAM GSA-H55N 1.04 PQ: 0 ANSI: 5
May 2 18:59:10 homestudio kernel: [ 1.364344] sr0: scsi3-mmc
drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
May 2 18:59:10 homestudio kernel: [ 1.364349] Uniform CD-ROM
driver Revision: 3.20
May 2 18:59:10 homestudio kernel: [ 1.364564] sr 2:0:0:0: Attached
scsi generic sg1 type 5
May 2 18:59:10 homestudio kernel: [ 1.532075] usb 2-2: new low
speed USB device using uhci_hcd and address 3
May 2 18:59:10 homestudio kernel: [ 1.701849] usb 2-2:
configuration #1 chosen from 1 choice
May 2 18:59:10 homestudio kernel: [ 1.716580] usbcore: registered
new interface driver hiddev
May 2 18:59:10 homestudio kernel: [ 1.732067] input: USB Optical
Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4
May 2 18:59:10 homestudio kernel: [ 1.732188] generic-usb
0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical
Mouse] on usb-0000:00:10.0-2/input0
May 2 18:59:10 homestudio kernel: [ 1.732222] usbcore: registered
new interface driver usbhid
May 2 18:59:10 homestudio kernel: [ 1.732225] usbhid: v2.6:USB HID
core driver
May 2 18:59:10 homestudio kernel: [ 1.935291] kjournald starting.
Commit interval 5 seconds
May 2 18:59:10 homestudio kernel: [ 1.935302] EXT3-fs: mounted
filesystem with ordered data mode.
May 2 18:59:10 homestudio kernel: [ 1.952141] usb 3-1: new full
speed USB device using uhci_hcd and address 2
May 2 18:59:10 homestudio kernel: [ 2.099081] usb 3-1:
configuration #1 chosen from 1 choice
May 2 18:59:10 homestudio kernel: [ 11.724688] udev: starting version 151
May 2 18:59:10 homestudio kernel: [ 11.726110] Adding 3903784k swap
on /dev/sda3. Priority:-1 extents:1 across:3903784k
May 2 18:59:10 homestudio kernel: [ 11.840634] lp: driver loaded
but no devices found
May 2 18:59:10 homestudio kernel: [ 11.935482] shpchp: Standard Hot
Plug PCI Controller Driver version: 0.4
May 2 18:59:10 homestudio kernel: [ 11.938365] k8temp 0000:00:18.3:
Temperature readouts might be wrong - check erratum #141
May 2 18:59:10 homestudio kernel: [ 11.938549] Linux agpgart interface v0.103
May 2 18:59:10 homestudio kernel: [ 11.941549] agpgart-amd64
0000:00:00.0: AGP bridge [1106/0204]
May 2 18:59:10 homestudio kernel: [ 11.982014] EXT3 FS on sda4,
internal journal
May 2 18:59:10 homestudio kernel: [ 12.004164] vga16fb: mapped to 0xc00a0000
May 2 18:59:10 homestudio kernel: [ 12.004239] fb0: VGA16 VGA frame
buffer device
May 2 18:59:10 homestudio kernel: [ 12.036539] agpgart-amd64
0000:00:00.0: AGP aperture is 128M @ 0xe8000000
May 2 18:59:10 homestudio kernel: [ 12.173815] usbcore: registered
new interface driver snd-usb-audio
May 2 18:59:10 homestudio kernel: [ 12.199837] type=1505
audit(1272823150.250:2): operation="profile_load" pid=621
name="/sbin/dhclient3"
May 2 18:59:10 homestudio kernel: [ 12.200129] type=1505
audit(1272823150.254:3): operation="profile_load" pid=621
name="/usr/lib/NetworkManager/nm-dhcp-client.action"
May 2 18:59:10 homestudio kernel: [ 12.200287] type=1505
audit(1272823150.254:4): operation="profile_load" pid=621
name="/usr/lib/connman/scripts/dhclient-script"
May 2 18:59:10 homestudio kernel: [ 12.220888] ACPI: PCI Interrupt
Link [ALKC] enabled at IRQ 22
May 2 18:59:10 homestudio kernel: [ 12.220906] VIA 82xx Audio
0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
May 2 18:59:10 homestudio kernel: [ 12.295611] Console: switching
to colour frame buffer device 80x30
May 2 18:59:10 homestudio kernel: [ 12.594586] type=1505
audit(1272823150.647:5): operation="profile_load" pid=732
name="/usr/share/gdm/guest-session/Xsession"
May 2 18:59:10 homestudio kernel: [ 12.602004] type=1505
audit(1272823150.655:6): operation="profile_replace" pid=738
name="/sbin/dhclient3"
May 2 18:59:10 homestudio kernel: [ 12.602304] type=1505
audit(1272823150.655:7): operation="profile_replace" pid=738
name="/usr/lib/NetworkManager/nm-dhcp-client.action"
May 2 18:59:10 homestudio kernel: [ 12.602473] type=1505
audit(1272823150.655:8): operation="profile_replace" pid=738
name="/usr/lib/connman/scripts/dhclient-script"
May 2 18:59:10 homestudio kernel: [ 12.611775] type=1505
audit(1272823150.663:9): operation="profile_load" pid=741
name="/usr/bin/evince"
May 2 18:59:10 homestudio kernel: [ 12.623731] type=1505
audit(1272823150.675:10): operation="profile_load" pid=741
name="/usr/bin/evince-previewer"
May 2 18:59:10 homestudio kernel: [ 12.626078] type=1505
audit(1272823150.679:11): operation="profile_load" pid=741
name="/usr/bin/evince-thumbnailer"
May 2 18:59:10 homestudio kernel: [ 12.781259] eth0: link up,
100Mbps, full-duplex, lpa 0x45E1
May 2 18:59:10 homestudio kernel: [ 12.890048] apm: BIOS not found.
May 2 18:59:11 homestudio kernel: [ 12.995109] ppdev: user-space
parallel port driver
May 2 18:59:11 homestudio kernel: [ 13.122948] [drm] Initialized
drm 1.1.0 20060810
May 2 18:59:11 homestudio kernel: [ 13.126611] pci 0000:01:00.0:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 2 18:59:11 homestudio kernel: [ 13.127471] [drm] Initialized
via 2.11.1 20070202 for 0000:01:00.0 on minor 0
May 2 18:59:11 homestudio kernel: [ 13.129642] agpgart-amd64
0000:00:00.0: AGP 3.0 bridge
May 2 18:59:11 homestudio kernel: [ 13.129664] agpgart-amd64
0000:00:00.0: putting AGP V3 device into 8x mode
May 2 18:59:11 homestudio kernel: [ 13.129730] pci 0000:01:00.0:
putting AGP V3 device into 8x mode
May 2 18:59:11 homestudio pulseaudio[1180]: lock-autospawn.c: Cannot
access autospawn lock.
May 2 19:00:12 homestudio kernel: [ 74.160074] Clocksource tsc
unstable (delta = -247018374 ns)




On Fri, Apr 30, 2010 at 12:23 PM, laurent.bellegarde
<laurent.bellegarde@free.fr> wrote:
> Fernando Gomes wrote:
>> Hi Laurent
>>
>> Thanks for your answer! The PC I'm trying to use has an MSI
>> motherboard, I'll check its model and the processor installed
>> tomorrow. Since there is a final ubuntu 10.04 version now, I'll try to
>> install it and if it works I'll then install the ubuntustudio packages
>> as you suggested. With previous ubuntustudio versions there were
>> lockups during boot if using the realtime kernel. I have best results
>> downloading the standard kernel, applying the rt patch to it, compile
>> it and install it, but also had some stability issues (some freezes
>> from time to time). I'll try with this new version and I'll let you
>> know
>>
>> Best regards
>>
>> Fernando
>
> Ok, we are waiting for the infos.
>
> Laurent
>
> --
> Ubuntu-Studio-users mailing list
> Ubuntu-Studio-users@lists.ubuntu.com
> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
>

--
Ubuntu-Studio-users mailing list
Ubuntu-Studio-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
 
Old 05-04-2010, 09:18 PM
Fernando Gomes
 
Default Motherboard compatibility - AMD, Intel

Hi

As promised, here are some details and the current situation on my
compatibility issues with Ubuntu Studio:

My current motherboard is a MSI K9MM-V/MS-7312 (VIA K8M800 chipset, S3
Graphics Unichrome 2D/3D Graphics), the processor is AMD Athlon 64 X2
Dual Core Processor 3600+ stepping 02, as you can see on the messages
file I've attached. It works flawlessly with Win XP and worked 24/7
since I bought it with Ubuntu (7.10 through 9.10, with standard
kernel). As you recommended I installed Ubuntu 10.04 "standard" (I've
installed the x86 version, not the AMD64) and then installed the
ubuntustudio packages. If I use the standard kernel the PC works as
expected. If I try to boot using the RT kernel it sometimes hangs
during boot saying it didn't find the boot disk, and sometimes it
boots normally, but when using the GUI the mouse starts working in
"slow motion" (sometimes it works in slow motion from the beginning,
sometimes only after some minutes). Even with the mouse working in
"slow motion" the audio applications work on realtime (just tried
Hydrogen using Jack). Sometimes after a few minutes all the gui seems
to freeze but the mouse keeps moving (but I have no feedback from
clicking applications or even trying to alt-tab between them). I'm
sending the messages file after booting with standard kernel, I don't
understand why it has no record for the rt kernel boot on it :-(
I've saw the message "HPET not enabled in BIOS. You might try
hpet=force boot option" and I've tried to force HPET as suggested, in
this case this message disappeared but the problems were similar.
Tonight I'll boot the RT kernel and try to put the dmesg output to file.
Can you point me to some diagnostic that can give any clue to the problem?
Is there any known issue with this chipset, or embedded graphics controller?
I know the graphics controller is not a good one with lots of ubuntu
support issues,
I can put an AGP Radeon board I have somewhere to test the difference...

Before using this PC in my "home studio" I've used another AMD board
and processor in the "home studio", was a motherboard with an AMD 780G
chipset with a AMD
Athlon 64 X2 4000+ processor. It worked very well with ubuntustudio
8.04, with more recent versions had similar problems to those I have
now (slow motion mouse, also some PC freezes - everything including
the mouse freezes, this don't happen with the current pc), the only
way to be able to use more recent ubuntustudio versions was to install
the standard ubuntu, to get a new kernel, to patch it with the RT
patch and to compile it, it then works almost flawlessly (only some
freezes from time to time). Someone here in the list said at that time
that it was better to use Intel platforms, so this was the reason for
my initial question, I don't want to build another PC for my "home
studio" (it will be the third) and have similar problems :-(


On Fri, Apr 30, 2010 at 12:23 PM, laurent.bellegarde
<laurent.bellegarde@free.fr> wrote:
> Fernando Gomes wrote:
>> Hi Laurent
>>
>> Thanks for your answer! The PC I'm trying to use has an MSI
>> motherboard, I'll check its model and the processor installed
>> tomorrow. Since there is a final ubuntu 10.04 version now, I'll try to
>> install it and if it works I'll then install the ubuntustudio packages
>> as you suggested. With previous ubuntustudio versions there were
>> lockups during boot if using the realtime kernel. I have best results
>> downloading the standard kernel, applying the rt patch to it, compile
>> it and install it, but also had some stability issues (some freezes
>> from time to time). I'll try with this new version and I'll let you
>> know
>>
>> Best regards
>>
>> Fernando
>
> Ok, we are waiting for the infos.
>
> Laurent
>
> --
> Ubuntu-Studio-users mailing list
> Ubuntu-Studio-users@lists.ubuntu.com
> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
>
--
Ubuntu-Studio-users mailing list
Ubuntu-Studio-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
 
Old 05-05-2010, 03:17 PM
"laurent.bellegarde"
 
Default Motherboard compatibility - AMD, Intel

Hi Fernando.

I've read your message, and the zip file attach.

I've notice nothing strange or bad in the dmesg file. Few things to my
mind could explain the trouble.

My mother has bought a laptop with a unichrome video controller. I've
installed on it Hardy with a lot of difficulties, due to the integrated
graphic card. It's really a bad one, maybe one of the most difficult to
make work properly under GNU/Linux.

So, you should try this. Keep your install, stop the PC, open it, plug
the ATI AGP graphic controller, and then boot the PC, enter fastly into
the bios, and modified the video configuration, with shunting off the
uinchrome video controller, and allow the ATI AGP work. Save the bios
and reboot, with the ATI controller connected to the monitor.

For the boot, use the generic kernel. If you have chance, Lucid should
fine the change and propose an image. With synpatic/or material devices
in system/admin menu, install the ATI xorg server package. Reboot with
generic kernel to see if the computer work fine. When everything, is ok,
in a terminal, do

sudo apt-get update

then

sudo apt-get dist-upgrade

and reboot on RT kernel.

Here, in my laptop (Intel PIV dual-core, ATI radeon), the ati driver is
working fine with the RT-kernel only in2D mode, but the lucid install is
stable.

Laurent

Fernando Gomes wrote:
> Hi
>
> As promised, here are some details and the current situation on my
> compatibility issues with Ubuntu Studio:
>
> My current motherboard is a MSI K9MM-V/MS-7312 (VIA K8M800 chipset, S3
> Graphics Unichrome 2D/3D Graphics), the processor is AMD Athlon 64 X2
> Dual Core Processor 3600+ stepping 02, as you can see on the messages
> file I've attached. It works flawlessly with Win XP and worked 24/7
> since I bought it with Ubuntu (7.10 through 9.10, with standard
> kernel). As you recommended I installed Ubuntu 10.04 "standard" (I've
> installed the x86 version, not the AMD64) and then installed the
> ubuntustudio packages. If I use the standard kernel the PC works as
> expected. If I try to boot using the RT kernel it sometimes hangs
> during boot saying it didn't find the boot disk, and sometimes it
> boots normally, but when using the GUI the mouse starts working in
> "slow motion" (sometimes it works in slow motion from the beginning,
> sometimes only after some minutes). Even with the mouse working in
> "slow motion" the audio applications work on realtime (just tried
> Hydrogen using Jack). Sometimes after a few minutes all the gui seems
> to freeze but the mouse keeps moving (but I have no feedback from
> clicking applications or even trying to alt-tab between them). I'm
> sending the messages file after booting with standard kernel, I don't
> understand why it has no record for the rt kernel boot on it :-(
> I've saw the message "HPET not enabled in BIOS. You might try
> hpet=force boot option" and I've tried to force HPET as suggested, in
> this case this message disappeared but the problems were similar.
> Tonight I'll boot the RT kernel and try to put the dmesg output to file.
> Can you point me to some diagnostic that can give any clue to the problem?
> Is there any known issue with this chipset, or embedded graphics controller?
> I know the graphics controller is not a good one with lots of ubuntu
> support issues,
> I can put an AGP Radeon board I have somewhere to test the difference...
>
> Before using this PC in my "home studio" I've used another AMD board
> and processor in the "home studio", was a motherboard with an AMD 780G
> chipset with a AMD
> Athlon 64 X2 4000+ processor. It worked very well with ubuntustudio
> 8.04, with more recent versions had similar problems to those I have
> now (slow motion mouse, also some PC freezes - everything including
> the mouse freezes, this don't happen with the current pc), the only
> way to be able to use more recent ubuntustudio versions was to install
> the standard ubuntu, to get a new kernel, to patch it with the RT
> patch and to compile it, it then works almost flawlessly (only some
> freezes from time to time). Someone here in the list said at that time
> that it was better to use Intel platforms, so this was the reason for
> my initial question, I don't want to build another PC for my "home
> studio" (it will be the third) and have similar problems :-(
>
>
> On Fri, Apr 30, 2010 at 12:23 PM, laurent.bellegarde
> <laurent.bellegarde@free.fr> wrote:
>
>> Fernando Gomes wrote:
>>
>>> Hi Laurent
>>>
>>> Thanks for your answer! The PC I'm trying to use has an MSI
>>> motherboard, I'll check its model and the processor installed
>>> tomorrow. Since there is a final ubuntu 10.04 version now, I'll try to
>>> install it and if it works I'll then install the ubuntustudio packages
>>> as you suggested. With previous ubuntustudio versions there were
>>> lockups during boot if using the realtime kernel. I have best results
>>> downloading the standard kernel, applying the rt patch to it, compile
>>> it and install it, but also had some stability issues (some freezes
>>> from time to time). I'll try with this new version and I'll let you
>>> know
>>>
>>> Best regards
>>>
>>> Fernando
>>>
>> Ok, we are waiting for the infos.
>>
>> Laurent
>>
>> --
>> Ubuntu-Studio-users mailing list
>> Ubuntu-Studio-users@lists.ubuntu.com
>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
>>
>>


--
Ubuntu-Studio-users mailing list
Ubuntu-Studio-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
 
Old 05-06-2010, 09:40 AM
Fernando Gomes
 
Default Motherboard compatibility - AMD, Intel

Hi Laurent

Thanks for your reply, this is my update:

I've inhibited the onboard graphics controller and installed a ATI
Radeon 9200 Pro (a spare board I have at home). The standard Ubuntu
works much better due to a better graphics controller (3D effects are
now possible, etc.). With the realtime kernel I have almost the same
issues I had before (and I have to remove the 3D effects, because with
3D effects active some application windows are completely black, p.e.
Nautilus). The mouse sometimes works in "slow motion" from the
beginning, sometimes change to "slow motion" during the first minutes
after logging in. I've noticed two different things on dmesg , one is
this line that appears sometimes (complete dmesg output attached):

[ 512.000033] should not be here with counts=0

The other issue I was unable to copy it because the PC completely
hangs a few minutes later, is a watchdog failure of what to me seems
the ethernet interface driver (and the ethernet communication was
blocked for some seconds). After that message I had a eth0 link up
message and the system has recovered.

Now I've started testing with my USB audio interface, and when the
mouse starts working in slow motion the audio interface also stopped
working, so it seems that the USB subsystem has some issues with the
RT kernel.

Do you suggest any other diagnose that could help to find the culprit(s)?

The kernel that I'm using is the Linux version 2.6.31-10-rt, that was
installed when I choose the ubuntustudio packages, but it has a
version previous to the standard kernel - Linux version
2.6.32-22-generic. Is this the 'good' RT kernel for Ubuntu 10.04? Are
there some alternative RT kernels? In my previous platform I normally
built my own RT kernels, but I want to use the distribution RT kernel
if possible. I've made also some tests using the generic kernel with
audio, using Hydrogen and Rackarrack and I didn't noticed audio issues
with the generic (non RT kernel), with Jack configured with the RT
option, is this normal?

If there is no other way I can try to change the motherboard but I
need to be sure to buy one that works with the RT kernel, are there
any suggestions (if possible compatible with my current processor -
AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02)

Thanks in advance

Fernando

On Wed, May 5, 2010 at 4:17 PM, laurent.bellegarde
<laurent.bellegarde@free.fr> wrote:
> Hi Fernando.
>
> I've read your message, and the zip file attach.
>
> I've notice nothing strange or bad in the dmesg file. Few things to my
> mind could explain the trouble.
>
> My mother has bought a laptop with a unichrome video controller. I've
> installed on it Hardy with a lot of difficulties, due to the integrated
> graphic card. It's really a bad one, maybe one of the most difficult to
> make work properly under GNU/Linux.
>
> So, you should try this. Keep your install, stop the PC, open it, plug
> the ATI AGP graphic controller, and then boot the PC, enter fastly into
> the bios, and modified the video configuration, with shunting off the
> uinchrome video controller, and allow the ATI AGP work. Save the bios
> and reboot, with the ATI controller connected to the monitor.
>
> For the boot, use the generic kernel. If you have chance, Lucid should
> fine the change and propose an image. With synpatic/or material devices
> in system/admin menu, install the ATI xorg server package. Reboot with
> generic kernel to see if the computer work fine. When everything, is ok,
> in a terminal, do
>
> sudo apt-get update
>
> then
>
> sudo apt-get dist-upgrade
>
> and reboot on RT kernel.
>
> Here, in my laptop (Intel PIV dual-core, ATI radeon), the ati driver is
> working fine with the RT-kernel only in2D mode, but the lucid install is
> stable.
>
> Laurent
>
> Fernando Gomes wrote:
>> Hi
>>
>> As promised, here are some details and the current situation on my
>> compatibility issues with Ubuntu Studio:
>>
>> My current motherboard is a MSI K9MM-V/MS-7312 (VIA K8M800 chipset, S3
>> Graphics Unichrome 2D/3D Graphics), the processor is AMD Athlon 64 X2
>> Dual Core Processor 3600+ stepping 02, as you can see on the messages
>> file I've attached. It works flawlessly with Win XP and worked 24/7
>> since I bought it with Ubuntu (7.10 through 9.10, with standard
>> kernel). As you recommended I installed Ubuntu 10.04 "standard" (I've
>> installed the x86 version, not the AMD64) and then installed the
>> ubuntustudio packages. If I use the standard kernel the PC works as
>> expected. If I try to boot using the RT kernel it sometimes hangs
>> during boot saying it didn't find the boot disk, and sometimes it
>> boots normally, but when using the GUI the mouse starts working in
>> "slow motion" (sometimes it works in slow motion from the beginning,
>> sometimes only after some minutes). Even with the mouse working in
>> "slow motion" the audio applications work on realtime (just tried
>> Hydrogen using Jack). Sometimes after a *few minutes all the gui seems
>> to freeze but the mouse keeps moving (but I have no feedback from
>> clicking applications or even trying to alt-tab between them). I'm
>> sending the messages file after booting with standard kernel, I don't
>> understand why it has no record for the rt kernel boot on it :-(
>> I've saw the message "HPET not enabled in BIOS. You might try
>> hpet=force boot option" and I've tried to force HPET as suggested, in
>> this case this message disappeared but the problems were similar.
>> Tonight I'll boot the RT kernel and try to put the dmesg output to file.
>> Can you point me to some diagnostic that can give any clue to the problem?
>> Is there any known issue with this chipset, or embedded graphics controller?
>> I know the graphics controller is not a good one with lots of ubuntu
>> support issues,
>> I can put an AGP Radeon board I have somewhere to test the difference...
>>
>> Before using this PC in my "home studio" I've used another AMD board
>> and processor in the "home studio", was a motherboard with an AMD 780G
>> chipset with a AMD
>> Athlon 64 X2 4000+ processor. It worked very well with ubuntustudio
>> 8.04, with more recent versions had similar problems to those I have
>> now (slow motion mouse, also some PC freezes - everything including
>> the mouse freezes, this don't happen with the current pc), the only
>> way to be able to use more recent ubuntustudio versions was to install
>> the standard ubuntu, to get a new kernel, to patch it with the RT
>> patch and to compile it, it then works almost flawlessly (only some
>> freezes from time to time). Someone here in the list said at that time
>> that it was better to use Intel platforms, so this was the reason for
>> my initial question, I don't want to build another PC for my "home
>> studio" (it will be the third) and have similar problems :-(
>>
>>
>> On Fri, Apr 30, 2010 at 12:23 PM, laurent.bellegarde
>> <laurent.bellegarde@free.fr> wrote:
>>
>>> Fernando Gomes wrote:
>>>
>>>> Hi Laurent
>>>>
>>>> Thanks for your answer! The PC I'm trying to use has an MSI
>>>> motherboard, I'll check its model and the processor installed
>>>> tomorrow. Since there is a final ubuntu 10.04 version now, I'll try to
>>>> install it and if it works I'll then install the ubuntustudio packages
>>>> as you suggested. With previous ubuntustudio versions there were
>>>> lockups during boot if using the realtime kernel. I have best results
>>>> downloading the standard kernel, applying the rt patch to it, compile
>>>> it and install it, but also had some stability issues (some freezes
>>>> from time to time). I'll try with this new version and I'll let you
>>>> know
>>>>
>>>> Best regards
>>>>
>>>> Fernando
>>>>
>>> Ok, we are waiting for the infos.
>>>
>>> Laurent
>>>
>>> --
>>> Ubuntu-Studio-users mailing list
>>> Ubuntu-Studio-users@lists.ubuntu.com
>>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
>>>
>>>
>
>
> --
> Ubuntu-Studio-users mailing list
> Ubuntu-Studio-users@lists.ubuntu.com
> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
>
--
Ubuntu-Studio-users mailing list
Ubuntu-Studio-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
 

Thread Tools




All times are GMT. The time now is 02:33 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org