Ubuntu Server 12.04.1 and Linux KVM on Fujitsu RX300 S5
 

On 08/27/2012 05:52 PM, S`row-Lain wrote:
> Hello List,

[...]

> root@in3db:~# lspci | grep Ethernet
> 08:00.0 Ethernet controller: Intel Corporation 82575EB Gigabit Network
> Connection (rev 02)
> 08:00.1 Ethernet controller: Intel Corporation 82575EB Gigabit Network
> Connection (rev 02)

Do you see the MAC address of the VM on the switch where the host is
connected to the network? Is there any MAC address filtering going on on
the port where the host is connected by any chance?

--
Imre Gergely
http://havaz.net
gpg --keyserver subkeys.pgp.net --recv-keys 0x34525305

--
ubuntu-server mailing list
ubuntu-server@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server
More info: https://wiki.ubuntu.com/ServerTeam

Ubuntu Server 12.04.1 and Linux KVM on Fujitsu RX300 S5
 

We use a very similair setup. I had the same problem. "My" solution was
to allow forward ip traffic on the host's firewall:


iptables -A FORWARD -i br0 -d {ip address of the guest} -j ACCEPT

I do not really know, why this is neccessary, but it works (for me).
Give it a try.


Am 27.08.2012 16:52, schrieb S`row-Lain:

Hello List,

we are running VMs in KVM on different Servers and everything is fine.
Now I wanted to set it up on Fujitsu RX300 S5 Servers, but using bridged
networking, all packets are dropped but to the host...

To explain it in more detail:
I install 12.04.1 Server AMD64 with default settings. Afterwards I update
the server with aptitude and set up the network like this:

auto br0
iface br0 inet static
address 192.168....
netmask 255.255.255.0
network 192.168....
broadcast 192.168....
gateway 192.168....
# dns-* options are implemented by the resolvconf package, if
installed

dns-nameservers ...
dns-search intel.local
bridge_ports eth0
bridge_stp off
bridge_maxwait 0
bridge_fd 0

Network connection is fine for the Host. On other Hardware this setup
runs smoothly on

Ubuntu Server 11.04 since more than a year...
If I setup a VM Guest (1204 Server) connected via a bridge (br0), the
guest can only reach
the Host. All other packets seem to be dropped. If I use a NAT-NIC
(default), the network

connection is fine.

I use virtio-drivers and the Server Hardware are two Fujitsu RX300 S5.
Doesn't work on both
systems. I compared iptables-rules, route-entries, all identical to
the other servers, where it

works just fine.
Does anybody have an idea, what it could be? I am really stuck =(
Do you need more info?

root@in3db:~# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.001999734942 no eth0
vnet0
virbr0 8000.000000000000 yes
---
root@in3db:~# lspci | grep Ethernet
08:00.0 Ethernet controller: Intel Corporation 82575EB Gigabit Network
Connection (rev 02)
08:00.1 Ethernet controller: Intel Corporation 82575EB Gigabit Network
Connection (rev 02)


Cheers
Michael H.



--
ubuntu-server mailing list
ubuntu-server@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server
More info: https://wiki.ubuntu.com/ServerTeam

Ubuntu Server 12.04.1 and Linux KVM on Fujitsu RX300 S5
 

Am 27.08.2012 17:40, schrieb Imre Gergely:

Do you see the MAC address of the VM on the switch where the host is
connected to the network? Is there any MAC address filtering going on on
the port where the host is connected by any chance?

Cheers! After pondering your question, I remembered the switch in the
computer centre to have a MAC-Filter... The other servers are connected
to another switch.

Sorry, for the trouble.

Michael

--
ubuntu-server mailing list
ubuntu-server@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server
More info: https://wiki.ubuntu.com/ServerTeam