FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Ubuntu > Ubuntu Server Development

 
 
LinkBack Thread Tools
 
Old 01-31-2010, 06:44 PM
"L.M.J"
 
Default Backup : Adaptec AHA-2944UW / AIC-7884U SCSI adapter & HP Q1523A tape reader

Le Sun, 31 Jan 2010 12:44:31 -0600,
Nick Fox <nickj.fox@gmail.com> a écrit :

> My first two items without knowing allot about this hardware:
>
> 1) alien can be used to convert a rpm -> deb for installation
> sudo apt-get install alien
Indeed, I've already done that but I'm wondering if those HP diagnostic tools could be helpful.


> 2) the error posted for the make file leads me to think there is a
> config/configure or the likes script you need to run prior to make.
> Perhpas look through any provided docs on the proper linux installation


The kernel module seems to be loded correctly :
# lsmod | grep -i aic
aic7xxx 166236 0
scsi_transport_spi 35584 1 aic7xxx
scsi_mod 183544 7 usb_storage,sr_mod,sd_mod,sg,aic7xxx,scsi_transpor t_spi,libata


The documentation can be found here : http://www.netadmintools.com/text/README.aic7xxx.txt

From what I've seen in the doc, I found something in /proc/scsi/aic7xxx/
# cat /proc/scsi/aic7xxx/4
Adaptec AIC7xxx driver version: 7.0
Adaptec 2944 Ultra SCSI adapter
aic7880: Ultra Wide Channel A, SCSI Id=3, 16/253 SCBs
Allocated SCBs: 4, SG List Length: 128

Serial EEPROM:
0xc378 0xc378 0xc378 0xc378 0xc378 0xc378 0xc378 0xc378
0xc378 0xc378 0xc378 0xc378 0xc378 0xc378 0xc378 0xc378
0x10a6 0x005f 0x2803 0x0010 0xffff 0xffff 0xffff 0xffff
0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x708d

Target 0 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 1 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 2 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 3 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 4 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 5 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 6 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 7 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 8 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 9 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 10 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 11 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 12 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 13 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 14 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Target 15 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)



But I'm still wondering why a "/dev/st0" appear somewhere to let me use my HP tape drive...
There is a counter at the back on the tape drive who can be increased from 0 to 15, should I set something
else then 0 ? I have only one SCSI device.
I'm using a Adaptec SCSI cable, does it must be plug in a specific way?


Thanks !

--
LMJ
"May the source be with you my young padawan"
http://sites.google.com/site/imatruelinuxmasterjedi/

--
ubuntu-server mailing list
ubuntu-server@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server
More info: https://wiki.ubuntu.com/ServerTeam
 
Old 02-03-2010, 08:25 PM
"L.M.J"
 
Default Backup : Adaptec AHA-2944UW / AIC-7884U SCSI adapter & HP Q1523A tape reader

Le Wed, 3 Feb 2010 09:18:06 -0500,
Mathieu Trudel-Lapierre <mathieu.tl@gmail.com> a écrit :
> Hi,
>
> Is there anything listed in /proc/scsi/scsi?

# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST380815AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3320620AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3320620AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3320613AS Rev: CC2F
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 01 Lun: 00
Vendor: _NEC Model: DVD_RW ND-3520A Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi8 Channel: 00 Id: 00 Lun: 00
Vendor: Canon Model: MP180Storage Rev: 0107
Type: Direct-Access ANSI SCSI revision: 02

Strange, I can't see my tape device there...

> On Wed, Feb 3, 2010 at 7:20 AM, L.M.J <linuxmasterjedi@free.fr> wrote:
> [...]
> >> There is a counter at the back on the tape drive who can be increased from
> >> 0 to 15, should I set something else then 0 ? I have only one SCSI device.
> If it's the only SCSI device, 0 should be just fine.
>
> >> I'm using a Adaptec SCSI cable, does it must be plug in a specific way?
> >>
>
> Here we've had some issues with connectors here, but it usually can be
> summarised with:
>
> - be *very* sure that the connector is plugged in correctly.
> Tightening the screws isn't optional
> - verify that the connector's pins aren't bent or broken.
>
> Note that it was experience with the VHDCI connectors and there were
> quite a few hardware replacements or moves as well, so YMMV.

My cable is an adaptec cable http://www.scsi4me.com/images/Adaptec-5device.jpg

http://www.scsi4me.com/display.php?nav_title=SCSI%20Connectors&page=scsi-connectors.htm
Look like I have High Density 68pin connector.

It's written at the back of the card : SCSI DIFF
At the back of the tape drive : SCSI LVD/SE

By the way, I have 2 SCSI plug at the back of the drive, which one I should use ?








--
ubuntu-server mailing list
ubuntu-server@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server
More info: https://wiki.ubuntu.com/ServerTeam
 
Old 02-03-2010, 08:30 PM
"L.M.J"
 
Default Backup : Adaptec AHA-2944UW / AIC-7884U SCSI adapter & HP Q1523A tape reader

Le Wed, 3 Feb 2010 09:18:06 -0500,
Mathieu Trudel-Lapierre <mathieu.tl@gmail.com> a écrit :

> Hi,
>
> Is there anything listed in /proc/scsi/scsi?
>
> On Wed, Feb 3, 2010 at 7:20 AM, L.M.J <linuxmasterjedi@free.fr> wrote:
> [...]
> >> There is a counter at the back on the tape drive who can be increased
> > from
> >> 0 to 15, should I set something
> >> else then 0 ? I have only one SCSI device.
>
> If it's the only SCSI device, 0 should be just fine.
>
> >> I'm using a Adaptec SCSI cable, does it must be plug in a specific way?
> >>
>
> Here we've had some issues with connectors here, but it usually can be
> summarised with:
>
> - be *very* sure that the connector is plugged in correctly.
> Tightening the screws isn't optional
> - verify that the connector's pins aren't bent or broken.
>
> Note that it was experience with the VHDCI connectors and there were
> quite a few hardware replacements or moves as well, so YMMV.

I have rmmod aic7xxx and modprobe aic7xxx and here is the dmesg output :

[207943.540296] <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[207943.540302] scsi4:0:0:0: Cmd aborted from QINFIFO
[207943.540304] aic7xxx_abort returns 0x2002
[207943.540311] scsi 4:0:0:0: Attempting to queue a TARGET RESET message
[207943.540312] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[207943.540316] scsi 4:0:0:0: Command not found
[207943.540317] aic7xxx_dev_reset returns 0x2002
[207953.540025] scsi 4:0:0:0: Attempting to queue an ABORT message
[207953.540031] CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[207953.540044] scsi4: At time of recovery, card was not paused
[207953.540049] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
[207953.540050] scsi4: Dumping Card State while idle, at SEQADDR 0x18
[207953.540052] Card was paused
[207953.540056] ACCUM = 0x2, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
[207953.540058] HCNT = 0x0 SCBPTR = 0x0
[207953.540060] SCSISIGI[0x4]BSYI) ERROR[0x0]
[207953.540066] SCSIBUSL[0x0] LASTPHASE[0x1]P_BUSFREE)
[207953.540070] SCSISEQ[0x1a]ENAUTOATNP|ENAUTOATNO|ENRSELI)
[207953.540075] SBLKCTL[0x2]SELWIDE) SCSIRATE[0x0]
[207953.540079] SEQCTL[0x10]FASTMODE) SEQ_FLAGS[0xc0]NO_CDB_SENT|NOT_IDENTIFIED)
[207953.540084] SSTAT0[0x5]DMADONE|SDONE) SSTAT1[0x0]
[207953.540089] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0]
[207953.540094] SIMODE1[0xa4]ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[207953.540098] SXFRCTL0[0x80]DFON) DFCNTRL[0x4]DIRECTION)
[207953.540103] DFSTATUS[0x6d]FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
[207953.540107] STACK: 0x37 0x37 0x192 0x17
[207953.540114] SCB count = 4
[207953.540115] Kernel NEXTQSCB = 2
[207953.540117] Card NEXTQSCB = 3
[207953.540118] QINFIFO entries: 3
[207953.540121] Waiting Queue entries:
[207953.540122] Disconnected Queue entries:
[207953.540124] QOUTFIFO entries:
[207953.540126] Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
[207953.540140] Sequencer SCB Info:
[207953.540142] 0 SCB_CONTROL[0x0] SCB_SCSIID[0x3] SCB_LUN[0x0]
[207953.540148] SCB_TAG[0xff]
[207953.540150] 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540155] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540159] 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540165] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540168] 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540174] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540177] 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540183] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540186] 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540192] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540195] 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540201] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540204] 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540210] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540214] 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540219] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540223] 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540228] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540232] 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540237] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540241] 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540246] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540250] 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540255] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540259] 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540264] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540268] 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540274] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540277] 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207953.540283] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207953.540286] Pending list:
[207953.540288] 3 SCB_CONTROL[0x40]DISCENB) SCB_SCSIID[0x3]
[207953.540291] SCB_LUN[0x0]
[207953.540293] Kernel Free SCB list: 1 0
[207953.540295] Untagged Q(0): 3
[207953.540297]
[207953.540298] <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[207953.540304] scsi4:0:0:0: Cmd aborted from QINFIFO
[207953.540306] aic7xxx_abort returns 0x2002
[207973.550024] scsi 4:0:0:0: Attempting to queue an ABORT message
[207973.550030] CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[207973.550043] scsi4: At time of recovery, card was not paused
[207973.550049] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
[207973.550050] scsi4: Dumping Card State while idle, at SEQADDR 0x18
[207973.550052] Card was paused
[207973.550055] ACCUM = 0x2, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
[207973.550058] HCNT = 0x0 SCBPTR = 0x0
[207973.550060] SCSISIGI[0x4]BSYI) ERROR[0x0]
[207973.550065] SCSIBUSL[0x0] LASTPHASE[0x1]P_BUSFREE)
[207973.550070] SCSISEQ[0x1a]ENAUTOATNP|ENAUTOATNO|ENRSELI)
[207973.550074] SBLKCTL[0x2]SELWIDE) SCSIRATE[0x0]
[207973.550078] SEQCTL[0x10]FASTMODE) SEQ_FLAGS[0xc0]NO_CDB_SENT|NOT_IDENTIFIED)
[207973.550084] SSTAT0[0x5]DMADONE|SDONE) SSTAT1[0x0]
[207973.550089] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0]
[207973.550094] SIMODE1[0xa4]ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[207973.550098] SXFRCTL0[0x80]DFON) DFCNTRL[0x4]DIRECTION)
[207973.550103] DFSTATUS[0x6d]FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
[207973.550106] STACK: 0x37 0x37 0x192 0x17
[207973.550113] SCB count = 4
[207973.550114] Kernel NEXTQSCB = 3
[207973.550116] Card NEXTQSCB = 3
[207973.550117] QINFIFO entries:
[207973.550119] Waiting Queue entries: 0:2
[207973.550123] Disconnected Queue entries:
[207973.550124] QOUTFIFO entries:
[207973.550126] Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
[207973.550140] Sequencer SCB Info:
[207973.550141] 0 SCB_CONTROL[0x40]DISCENB) SCB_SCSIID[0x3]
[207973.550147] SCB_LUN[0x0] SCB_TAG[0x2]
[207973.550150] 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550155] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550159] 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550165] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550168] 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550174] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550177] 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550183] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550186] 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550192] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550195] 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550201] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550204] 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550210] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550213] 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550219] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550222] 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550228] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550231] 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550237] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550240] 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550246] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550249] 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550255] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550258] 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550264] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550267] 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550273] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550276] 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]TWIN_CHNLB|OID|TWIN_TID)
[207973.550282] SCB_LUN[0xff]SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[207973.550285] Pending list:
[207973.550286] 2 SCB_CONTROL[0x40]DISCENB) SCB_SCSIID[0x3]
[207973.550290] SCB_LUN[0x0]
[207973.550291] Kernel Free SCB list: 1 0
[207973.550294] Untagged Q(0): 2
[207973.550295]
[207973.550296] <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[207973.550307] scsi4:0:0:0: Cmd aborted from QINFIFO
[207973.550309] aic7xxx_abort returns 0x2002
[207973.550312] scsi 4:0:0:0: Device offlined - not ready after error recovery
[207983.221155] ata1: hard resetting link
[207984.130030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[207984.280189] ata1.00: configured for UDMA/133
[207984.280196] ata1: EH complete
[207984.280249] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[207984.280265] sd 0:0:0:0: [sda] Write Protect is off
[207984.280267] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[207984.280290] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[207987.721027] ata2: hard resetting link
[207988.630027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[207988.774649] ata2.00: configured for UDMA/133
[207988.774656] ata2: EH complete
[207988.774694] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[207988.774710] sd 1:0:0:0: [sdb] Write Protect is off
[207988.774712] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[207988.774735] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

--
ubuntu-server mailing list
ubuntu-server@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server
More info: https://wiki.ubuntu.com/ServerTeam
 

Thread Tools




All times are GMT. The time now is 05:41 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org