Questions about swapping in hardware (disaster recovery) solution..
The problem appears to be that the 'sysklogd' service is hanging, as I
only have to kill the service (/etc/init.d/sysklogd stop) and the
system startup process continues, and then everything works again.
On Dec 4, 2007 2:07 PM, Paul Schulz <firstname.lastname@example.org> wrote:
> Greetings all!
> I have an interesting server problem..
> We (at work) are installing a new server and at the same time
> preparing backup hardware should something go wrong.. The plan is to
> do nightly backups to a disk in such a way that should something go
> wrong we can then swap in replacement hardware and/or disk, and take
> off from where the backup was done.
> So.. I trying to create a Ubuntu-server system which is portable
> across identical hardware, but where serial-numbers/MAC addresses will
> have changed.
> It is almost there, with just a couple of snags..
> - grub and fstab need to refer to device names rather than UUID's (easy to fix).
> - 'udev' wants to keep network device names around (looks easy to fix)
> - sysklogd does not start up properly, which causes logins to stop
> working (interesting to debug).
> Restarting sysklogd allows logins to occur.. but I get the following error:
> syslogd: unknown priority name "exec"
> It's the last one I need to get to the bottom of (hence my question),
> but other than this.. the idea, as a concept works quite well for us
> (details below).
> Does anyone have any suggestions?
> [Hardware is DELL 1950 1U servers with 2x 72GB SAS drives (non-RAID)]
> -- Disaster recovery methodology --
> Two servers (S1,S2, geographically separated),
> with two disks in each (diskA, diskB and diskC, diskD) + a couple of
> spare identical drives.
> Main server:
> - S1-diskA, S2-diskC are Ubuntu-server installs
> - S1-diskA is the main server disk (sda)
> - On S1, diskB is a copy of diskA - 'dd' is used initially, then
> regular rsync to maintain the copy.
> (Initial dd is also done to diskD to setup partitioning.)
> Backup server:
> - S2-diskC is a basic install, but is used to regularly copy
> S1-diskB to S2-diskD
> across the network.
> - S2-diskD can be swapped for a spare drive to keep rolling system backups.
> - Should the disk (diskA) fail in S1, then diskB can be swapped in
> and system rebooted.
> - Should hardware in S1 fail, S2 can be moved in with diskA and
> system rebooted.
> - These operations can be tested independently on S2 hardware.
ubuntu-server mailing list
More info: https://wiki.ubuntu.com/ServerTeam
|All times are GMT. The time now is 02:48 AM.|
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.