Linux Archive - evtouch support for a Dell Latitude XT (n-trig)

Hi,

I am using a Dell Latitude XT with the n-trig touchscreen.
I tried to use evtouch to use the touchscreen.
It seems that it is not working.
If you could help me it would be great. I am doing a wiki to help the
other users of this laptop.

Best regards

--
Laurent Steck

Ch.Praz-Voué 2
1031 Mex
Switzerland
079/439.84.11
swiss_made@bluewin.ch

Dumping 108 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
info.capabilities = {'cpufreq_control'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement ', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.m ethod_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', ', ', ', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.m ethod_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.m ethod_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.m ethod_signatures = {'i', 'i', ', ', ', 'b'} (string list)
power_management.acpi.linux.version = '20080609' (string)
power_management.can_hibernate = true (bool)
power_management.can_suspend = true (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.is_powersave_set = false (bool)
power_management.type = 'acpi' (string)
system.chassis.manufacturer = 'Dell Inc.' (string)
system.chassis.type = 'Portable' (string)
system.firmware.release_date = '08/28/2008' (string)
system.firmware.vendor = 'Dell Inc.' (string)
system.firmware.version = 'A05' (string)
system.formfactor = 'laptop' (string)
system.hardware.primary_video.product = 31042 (0x7942) (int)
system.hardware.primary_video.vendor = 4098 (0x1002) (int)
system.hardware.product = 'Latitude XT' (string)
system.hardware.serial = 'J12YX3J' (string)
system.hardware.uuid = '44454C4C-3100-1032-8059-CAC04F58334A' (string)
system.hardware.vendor = 'Dell Inc.' (string)
system.hardware.version = ' (string)
system.kernel.machine = 'i686' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.27-7-generic' (string)

udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string)
linux.acpi_path = '/proc/acpi/processor/CPU0' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string)
linux.acpi_path = '/proc/acpi/processor/CPU1' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 1 (0x1) (int)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
access_control.file = '/dev/snd/timer' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Timer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
linux.device_file = '/dev/snd/timer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
access_control.file = '/dev/sequencer2' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
linux.device_file = '/dev/sequencer2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string)
oss.device_file = '/dev/sequencer2' (string)
oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
access_control.file = '/dev/sequencer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
linux.device_file = '/dev/sequencer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string)
oss.device_file = '/dev/sequencer' (string)
oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
access_control.file = '/dev/snd/seq' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/seq' (string)
alsa.type = 'sequencer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
linux.device_file = '/dev/snd/seq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Macintosh mouse button emulation' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Macintosh mouse button emulation' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
button.has_state = false (bool)
button.type = 'sleep' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Sleep Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string)
input.device = '/dev/input/event6' (string)
input.product = 'Sleep Button (CM)' (string)
linux.device_file = '/dev/input/event6' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
button.has_state = true (bool)
button.state.value = false (bool)
button.type = 'lid' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.switch', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Lid Switch' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string)
input.device = '/dev/input/event4' (string)
input.product = 'Lid Switch' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event4' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string)
input.device = '/dev/input/event5' (string)
input.product = 'Power Button (CM)' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5' (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0'
battery.charge_level.current = 39549 (0x9a7d) (int)
battery.charge_level.design = 42180 (0xa4c4) (int)
battery.charge_level.last_full = 39549 (0x9a7d) (int)
battery.charge_level.percentage = 100 (0x64) (int)
battery.charge_level.rate = 11 (0xb) (int)
battery.is_rechargeable = true (bool)
battery.model = 'DELL WR0158' (string)
battery.present = true (bool)
battery.rechargeable.is_charging = false (bool)
battery.rechargeable.is_discharging = false (bool)
battery.reporting.current = 3800 (0xed8) (int)
battery.reporting.design = 3800 (0xed8) (int)
battery.reporting.last_full = 3563 (0xdeb) (int)
battery.reporting.rate = 1 (0x1) (int)
battery.reporting.technology = 'Li-ion' (string)
battery.reporting.unit = 'mAh' (string)
battery.serial = '285' (string)
battery.technology = 'lithium-ion' (string)
battery.type = 'primary' (string)
battery.vendor = 'Sanyo' (string)
battery.voltage.current = 12540 (0x30fc) (int)
battery.voltage.design = 11100 (0x2b5c) (int)
battery.voltage.unit = 'mV' (string)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'DELL WR0158' (string)
info.subsystem = 'power_supply' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'power_supply' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Video Bus' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event8' (string)
input.product = 'Video Bus' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'ch' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'evdev' (string)
input.xkb.variant = 'fr' (string)
linux.device_file = '/dev/input/event8' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:30/input/input8/event8' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Video Bus' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event7' (string)
input.product = 'Video Bus' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'ch' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'evdev' (string)
input.xkb.variant = 'fr' (string)
linux.device_file = '/dev/input/event7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2a/device:2b/input/input7/event7' (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC'
ac_adapter.present = true (bool)
info.capabilities = {'ac_adapter'} (string list)
info.category = 'ac_adapter' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic AC Adapter Device' (string)
info.subsystem = 'power_supply' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'power_supply' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/AC' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_3'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_2'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_1'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0103)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.id = 'PNP0103' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT-style speaker sound' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
pnp.description = 'AT-style speaker sound' (string)
pnp.id = 'PNP0800' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.linux.driver = 'rtc_cmos' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.description = 'AT Real-Time Clock' (string)
pnp.id = 'PNP0b00' (string)

udi = '/org/freedesktop/Hal/devices/pnp_DELabcd'
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (DELabcd)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_DELabcd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.id = 'DELabcd' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
info.linux.driver = 'i8042 aux' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PS/2 Port for PS/2-style Mice' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
pnp.description = 'PS/2 Port for PS/2-style Mice' (string)
pnp.id = 'PNP0f13' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PCI Bus' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.description = 'PCI Bus' (string)
pnp.id = 'PNP0a03' (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.linux.driver = 'serial8250' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (serial8250)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/serial8250' (string)
platform.id = 'serial8250' (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.linux.driver = 'pcspkr' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
info.capabilities = {'input'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
info.product = 'PC Speaker' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string)
input.device = '/dev/input/event9' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
input.product = 'PC Speaker' (string)
linux.device_file = '/dev/input/event9' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input9/event9' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'i8042' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
info.linux.driver = 'psmouse' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string)
serio.description = 'i8042 AUX port' (string)
serio.id = 'serio1' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
info.product = 'PS/2 Generic Mouse' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string)
input.device = '/dev/input/event10' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'PS/2 Generic Mouse' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event10' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input10/event10' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'hal-setup-keymap', 'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'input.keymap', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event1' (string)
input.keymap.data = {'e001:playpause', 'e002:stopcd', 'e003:previoussong', 'e004:nextsong', 'e005:brightnessdown', 'e006:brightnessup', 'e007:battery', 'e008:wlan', 'e009:ejectclosecd', 'e00a:suspend', 'e00b:displaytoggle', 'e00f:switchvideomode', 'e010:previoussong', 'e011:prog1', 'e012:media', 'e013:f23', 'e015:camera', 'e00c:f23', 'e019:nextsong', 'e01b:switchvideomode', 'e022:playpause', 'e024:stopcd', 'e06d:media', 'e058:screenlock', 'e017:email', 'e018:f21', 'e01a:setup'} (string list)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'ch' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'evdev' (string)
input.xkb.variant = 'fr' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string)

udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (eisa.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/eisa.0' (string)
platform.id = 'eisa.0' (string)

udi = '/org/freedesktop/Hal/devices/platform_dcdbas'
info.linux.driver = 'dcdbas' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (dcdbas)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_dcdbas' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/dcdbas' (string)
platform.id = 'dcdbas' (string)

udi = '/org/freedesktop/Hal/devices/dell_lcd_panel'
info.addons = {'hald-addon-dell-backlight'} (string list)
info.capabilities = {'laptop_panel'} (string list)
info.category = 'laptop_panel' (string)
info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string)
info.product = 'Dell Laptop Panel' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/dell_lcd_panel' (string)
laptop_panel.access_method = 'custom' (string)
laptop_panel.brightness_in_hardware = true (bool)
laptop_panel.num_levels = 8 (0x8) (int)

udi = '/org/freedesktop/Hal/devices/dell_wwan_switch'
info.capabilities = {'killswitch'} (string list)
info.category = 'killswitch' (string)
info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string)
info.product = 'Dell WWAN Switch' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/dell_wwan_switch' (string)
killswitch.access_method = 'dell' (string)
killswitch.type = 'wwan' (string)
org.freedesktop.Hal.Device.KillSwitch.method_argna mes = {'power', '} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_execp aths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_signa tures = {'b', '} (string list)

udi = '/org/freedesktop/Hal/devices/dell_wlan_switch'
info.capabilities = {'killswitch'} (string list)
info.category = 'killswitch' (string)
info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string)
info.product = 'Dell WLAN Switch' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/dell_wlan_switch' (string)
killswitch.access_method = 'dell' (string)
killswitch.type = 'wlan' (string)
org.freedesktop.Hal.Device.KillSwitch.method_argna mes = {'power', '} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_execp aths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_signa tures = {'b', '} (string list)

udi = '/org/freedesktop/Hal/devices/dell_bluetooth_switch'
info.capabilities = {'killswitch'} (string list)
info.category = 'killswitch' (string)
info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string)
info.product = 'Dell Bluetooth Switch' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/dell_bluetooth_switch' (string)
killswitch.access_method = 'dell' (string)
killswitch.type = 'bluetooth' (string)
org.freedesktop.Hal.Device.KillSwitch.method_argna mes = {'power', '} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_execp aths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_signa tures = {'b', '} (string list)

udi = '/org/freedesktop/Hal/devices/pci_1002_4384'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'SBx00 PCI to PCI Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4384' (string)
info.vendor = 'ATI Technologies Inc' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4' (string)
pci.product = 'SBx00 PCI to PCI Bridge' (string)
pci.product_id = 17284 (0x4384) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'ATI Technologies Inc' (string)
pci.vendor_id = 4098 (0x1002) (int)

udi = '/org/freedesktop/Hal/devices/pci_104c_803c'
info.linux.driver = 'sdhci-pci' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4384' (string)
info.product = 'PCIxx12 SDA Standard Compliant SD Host Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_803c' (string)
info.vendor = 'Texas Instruments' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:03:01.3' (string)
pci.device_class = 8 (0x8) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:03:01.3' (string)
pci.product = 'PCIxx12 SDA Standard Compliant SD Host Controller' (string)
pci.product_id = 32828 (0x803c) (int)
pci.subsys_product_id = 516 (0x204) (int)
pci.subsys_vendor = 'Dell' (string)
pci.subsys_vendor_id = 4136 (0x1028) (int)
pci.vendor = 'Texas Instruments' (string)
pci.vendor_id = 4172 (0x104c) (int)

udi = '/org/freedesktop/Hal/devices/pci_104c_803c_mmc_host'
info.capabilities = {'mmc_host'} (string list)
info.category = 'mmc_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_104c_803c' (string)
info.product = 'MMC/SD Host Adapter' (string)
info.subsystem = 'mmc_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_803c_mmc_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'mmc_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:03:01.3/mmc_host/mmc0' (string)
mmc_host.host = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/pci_104c_803a'
info.linux.driver = 'ohci1394' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4384' (string)
info.product = 'PCIxx12 OHCI Compliant IEEE 1394 Host Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_803a' (string)
info.vendor = 'Texas Instruments' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:03:01.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:03:01.1' (string)
pci.product = 'PCIxx12 OHCI Compliant IEEE 1394 Host Controller' (string)
pci.product_id = 32826 (0x803a) (int)
pci.subsys_product_id = 516 (0x204) (int)
pci.subsys_vendor = 'Dell' (string)
pci.subsys_vendor_id = 4136 (0x1028) (int)
pci.vendor = 'Texas Instruments' (string)
pci.vendor_id = 4172 (0x104c) (int)

udi = '/org/freedesktop/Hal/devices/pci_104c_8039'
info.linux.driver = 'yenta_cardbus' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4384' (string)
info.product = 'PCIxx12 Cardbus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_8039' (string)
info.vendor = 'Texas Instruments' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:03:01.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 7 (0x7) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:03:01.0' (string)
pci.product = 'PCIxx12 Cardbus Controller' (string)
pci.product_id = 32825 (0x8039) (int)
pci.subsys_product_id = 516 (0x204) (int)
pci.subsys_vendor = 'Dell' (string)
pci.subsys_vendor_id = 4136 (0x1028) (int)
pci.vendor = 'Texas Instruments' (string)
pci.vendor_id = 4172 (0x104c) (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_438d'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'SB600 PCI to LPC Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438d' (string)
info.vendor = 'ATI Technologies Inc' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3' (string)
pci.product = 'SB600 PCI to LPC Bridge' (string)
pci.product_id = 17293 (0x438d) (int)
pci.subsys_product_id = 516 (0x204) (int)
pci.subsys_vendor = 'Dell' (string)
pci.subsys_vendor_id = 4136 (0x1028) (int)
pci.vendor = 'ATI Technologies Inc' (string)
pci.vendor_id = 4098 (0x1002) (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383'
info.linux.driver = 'HDA Intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'SBx00 Azalia (Intel HDA)' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383' (string)
info.vendor = 'ATI Technologies Inc' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2' (string)
pci.product = 'SBx00 Azalia (Intel HDA)' (string)
pci.product_id = 17283 (0x4383) (int)
pci.subsys_product_id = 516 (0x204) (int)
pci.subsys_vendor = 'Dell' (string)
pci.subsys_vendor_id = 4136 (0x1028) (int)
pci.vendor = 'ATI Technologies Inc' (string)
pci.vendor_id = 4098 (0x1002) (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'
info.capabilities = {'sound'} (string list)
info.category = 'sound' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383' (string)
info.product = 'HDA ATI SB Sound Card' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0' (string)
sound.card = 0 (0x0) (int)
sound.card_id = 'HDA ATI SB' (string)
sound.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_1'
access_control.file = '/dev/snd/pcmC0D1p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA ATI SB' (string)
alsa.device = 1 (0x1) (int)
alsa.device_file = '/dev/snd/pcmC0D1p' (string)
alsa.device_id = 'STAC92xx Digital' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
info.product = 'STAC92xx Digital ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_1' (string)
linux.device_file = '/dev/snd/pcmC0D1p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D1p' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_0'
access_control.file = '/dev/snd/pcmC0D0p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA ATI SB' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0p' (string)
alsa.device_id = 'STAC92xx Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
info.product = 'STAC92xx Analog ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_0' (string)
linux.device_file = '/dev/snd/pcmC0D0p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0p' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_0'
access_control.file = '/dev/snd/pcmC0D0c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA ATI SB' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0c' (string)
alsa.device_id = 'STAC92xx Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
info.product = 'STAC92xx Analog ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_0' (string)
linux.device_file = '/dev/snd/pcmC0D0c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0c' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_mixer__1'
access_control.file = '/dev/mixer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
info.product = 'STAC92xx Analog OSS Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_mixer__1' (string)
linux.device_file = '/dev/mixer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/mixer' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA ATI SB' (string)
oss.device_file = '/dev/mixer' (string)
oss.device_id = 'STAC92xx Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
oss.type = 'mixer' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0_0'
access_control.file = '/dev/dsp' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
info.product = 'STAC92xx Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0_0' (string)
linux.device_file = '/dev/dsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/dsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA ATI SB' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/dsp' (string)
oss.device_id = 'STAC92xx Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_control__1'
access_control.file = '/dev/snd/controlC0' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA ATI SB' (string)
alsa.device_file = '/dev/snd/controlC0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
alsa.type = 'control' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
info.product = 'HDA ATI SB ALSA Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_control__1' (string)
linux.device_file = '/dev/snd/controlC0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/controlC0' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0'
access_control.file = '/dev/audio' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
info.product = 'STAC92xx Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0' (string)
linux.device_file = '/dev/audio' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/audio' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA ATI SB' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/audio' (string)
oss.device_id = 'STAC92xx Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_1'
access_control.file = '/dev/adsp' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
info.product = 'STAC92xx Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_1' (string)
linux.device_file = '/dev/adsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/adsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA ATI SB' (string)
oss.device = 1 (0x1) (int)
oss.device_file = '/dev/adsp' (string)
oss.device_id = 'STAC92xx Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string)
oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c'
info.linux.driver = 'pata_atiixp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'SB600 IDE' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c' (string)
info.vendor = 'ATI Technologies Inc' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 138 (0x8a) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1' (string)
pci.product = 'SB600 IDE' (string)
pci.product_id = 17292 (0x438c) (int)
pci.subsys_product_id = 516 (0x204) (int)
pci.subsys_vendor = 'Dell' (string)
pci.subsys_vendor_id = 4136 (0x1028) (int)
pci.vendor = 'ATI Technologies Inc' (string)
pci.vendor_id = 4098 (0x1002) (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_0'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host1/scsi_host/host1' (string)
scsi_host.host = 1 (0x1) (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host0' (string)
scsi_host.host = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host0/scsi_host/host0' (string)
scsi_host.host = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host0/target0:0:0/0:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'TOSHIBA MK8009GA' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0_scsi_gene ric'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0_scsi_gene ric' (string)
linux.device_file = '/dev/sg0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string)
scsi_generic.device = '/dev/sg0' (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_TOSHIBA_MK8009GAH_78C3WW92W'
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_TOSHIBA_MK8009GAH_78C3WW92W' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0' (string)
info.product = 'TOSHIBA MK8009GA' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_TOSHIBA_MK8009GAH_78C3WW92W' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host0/target0:0:0/0:0:0:0/block/sda' (string)
storage.automount_enabled_hint = false (bool)
storage.bus = 'scsi' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = 'BS01' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'TOSHIBA MK8009GA' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 80026361856 (0x12a1f16000) (uint64)
storage.requires_eject = false (bool)
storage.serial = '1ATA_TOSHIBA_MK8009GAH_78C3WW92W' (string)
storage.size = 80026361856 (0x12a1f16000) (uint64)
storage.vendor = 'ATA' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_2faf7479_443e_47f8_95e7_629ea11c91c7'
block.device = '/dev/sda5' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 5 (0x5) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_TOSHIBA_MK8009GAH_78C3WW92W' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_TOSHIBA_MK8009GAH_78C3WW92W' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_2faf7479_443e_47f8_95e7_629ea11c91c7' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host0/target0:0:0/0:0:0:0/block/sda/sda5' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signature s = {'ssas', 'as', 'as'} (string list)
storage.model = ' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = ' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/' (string)
volume.num_blocks = 154336392 (0x932fc88) (uint64)
volume.partition.flags = {} (string list)
volume.partition.label = ' (string)
volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.scheme = 'embr' (string)
volume.partition.start = 1003516416 (0x3bd07200) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = ' (string)
volume.size = 79020232704 (0x1265f91000) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '2faf7479-443e-47f8-95e7-629ea11c91c7' (string)

udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_TOSHIBA_MK8009GAH_78C3WW92W' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_TOSHIBA_MK8009GAH_78C3WW92W' (string)
info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host0/target0:0:0/0:0:0:0/block/sda/sda2' (string)
storage.model = ' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = ' (string)
volume.fsusage = 'partitiontable' (string)
volume.fsversion = ' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = ' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = ' (string)
volume.num_blocks = 2 (0x2) (uint64)
volume.partition.flags = {} (string list)
volume.partition.label = ' (string)
volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 1003484160 (0x3bcff400) (uint64)
volume.partition.type = '0x05' (string)
volume.partition.uuid = ' (string)
volume.size = 1024 (0x400) (uint64)
volume.uuid = ' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_a50f03ca_1182_4bd7_ace1_cf4f9a6a512c'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_TOSHIBA_MK8009GAH_78C3WW92W' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_TOSHIBA_MK8009GAH_78C3WW92W' (string)
info.product = 'Volume (swap)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_a50f03ca_1182_4bd7_ace1_cf4f9a6a512c' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string)
storage.model = ' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'swap' (string)
volume.fsusage = 'other' (string)
volume.fsversion = '2' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = ' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = ' (string)
volume.num_blocks = 1959867 (0x1de7bb) (uint64)
volume.partition.flags = {'boot'} (string list)
volume.partition.label = ' (string)
volume.partition.media_size = 80026361856 (0x12a1f16000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.partition.type = '0x82' (string)
volume.partition.uuid = ' (string)
volume.size = 1003451904 (0x3bcf7600) (uint64)
volume.uuid = 'a50f03ca-1182-4bd7-ace1-cf4f9a6a512c' (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4385'
info.linux.driver = 'piix4_smbus' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'SBx00 SMBus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4385' (string)
info.vendor = 'ATI Technologies Inc' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0' (string)
pci.product = 'SBx00 SMBus Controller' (string)
pci.product_id = 17285 (0x4385) (int)
pci.subsys_product_id = 516 (0x204) (int)
pci.subsys_vendor = 'Dell' (string)
pci.subsys_vendor_id = 4136 (0x1028) (int)
pci.vendor = 'ATI Technologies Inc' (string)
pci.vendor_id = 4098 (0x1002) (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4386'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'SB600 USB Controller (EHCI)' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4386' (string)
info.vendor = 'ATI Technologies Inc' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5' (string)
pci.product = 'SB600 USB Controller (EHCI)' (string)
pci.product_id = 17286 (0x4386) (int)
pci.subsys_product_id = 516 (0x204) (int)
pci.subsys_vendor = 'Dell' (string)
pci.subsys_vendor_id = 4136 (0x1028) (int)
pci.vendor = 'ATI Technologies Inc' (string)
pci.vendor_id = 4098 (0x1002) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4386' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/006/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6' (string)
usb_device.bus_number = 6 (0x6) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 10 (0xa) (int)
usb_device.product = '2.0 root hub' (string)