FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Ubuntu > Ubuntu Mobile and Embedded

 
 
LinkBack Thread Tools
 
Old 11-20-2008, 12:59 PM
Thomas
 
Default Touch screen calibration fails on SH6 with error message

Dumping 95 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement '} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.m ethod_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', ', ', ', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.m ethod_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.m ethod_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.m ethod_signatures = {'i', 'i', ', ', ', 'b'} (string list)
power_management.acpi.linux.version = '20080609' (string)
power_management.can_hibernate = true (bool)
power_management.can_suspend = true (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.is_powersave_set = false (bool)
power_management.type = 'acpi' (string)
system.chassis.manufacturer = 'No Enclosure' (string)
system.chassis.type = 'Other' (string)
system.firmware.release_date = '10/03/07' (string)
system.firmware.vendor = 'Phoenix Technologies LTD' (string)
system.firmware.version = 'NAPA0001.86C.0000.D.0710032314' (string)
system.formfactor = 'laptop' (string)
system.hardware.primary_video.product = 10146 (0x27a2) (int)
system.hardware.primary_video.vendor = 32902 (0x8086) (int)
system.hardware.product = 'SH series' (string)
system.hardware.serial = '87CF01510878' (string)
system.hardware.uuid = 'B6EE4D50-A782-11DC-A70E-00A0D1C35307' (string)
system.hardware.vendor = 'KOHJINSHA CO.,LTD.' (string)
system.hardware.version = 'Not Applicable' (string)
system.kernel.machine = 'i686' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.27-4-lpia' (string)

udi = '/org/freedesktop/Hal/devices/acpi_FAN0'
fan.enabled = false (bool)
info.capabilities = {'fan'} (string list)
info.category = 'fan' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Fan' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_FAN0' (string)
linux.acpi_path = '/proc/acpi/fan/FAN0' (string)
linux.acpi_type = 2 (0x2) (int)
linux.hotplug_type = 4 (0x4) (int)

udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Genuine Intel(R) processor 600MHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string)
linux.acpi_path = '/proc/acpi/processor/CPU0' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
access_control.file = '/dev/snd/timer' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Timer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
linux.device_file = '/dev/snd/timer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/timer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
access_control.file = '/dev/sequencer2' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
linux.device_file = '/dev/sequencer2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/sequencer2' (string)
oss.device_file = '/dev/sequencer2' (string)
oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
access_control.file = '/dev/sequencer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
linux.device_file = '/dev/sequencer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/sequencer' (string)
oss.device_file = '/dev/sequencer' (string)
oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
access_control.file = '/dev/snd/seq' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/seq' (string)
alsa.type = 'sequencer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
linux.device_file = '/dev/snd/seq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/seq' (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0'
battery.charge_level.current = 23387 (0x5b5b) (int)
battery.charge_level.design = 25874 (0x6512) (int)
battery.charge_level.last_full = 25874 (0x6512) (int)
battery.charge_level.percentage = 90 (0x5a) (int)
battery.charge_level.rate = 6693 (0x1a25) (int)
battery.is_rechargeable = true (bool)
battery.model = 'NBP3A62-3S1P' (string)
battery.present = true (bool)
battery.rechargeable.is_charging = true (bool)
battery.rechargeable.is_discharging = false (bool)
battery.remaining_time = 1337 (0x539) (int)
battery.reporting.current = 2107 (0x83b) (int)
battery.reporting.design = 2331 (0x91b) (int)
battery.reporting.last_full = 2331 (0x91b) (int)
battery.reporting.rate = 603 (0x25b) (int)
battery.reporting.technology = 'Li-ion' (string)
battery.reporting.unit = 'mAh' (string)
battery.serial = '0354' (string)
battery.technology = 'lithium-ion' (string)
battery.type = 'primary' (string)
battery.vendor = ' (string)
battery.voltage.current = 11100 (0x2b5c) (int)
battery.voltage.design = 11100 (0x2b5c) (int)
battery.voltage.unit = 'mV' (string)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'NBP3A62-3S1P' (string)
info.subsystem = 'power_supply' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'power_supply' (string)
linux.sysfs_path = '/sys/class/power_supply/BAT0' (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ADP0'
ac_adapter.present = true (bool)
info.capabilities = {'ac_adapter'} (string list)
info.category = 'ac_adapter' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic AC Adapter Device' (string)
info.subsystem = 'power_supply' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ADP0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'power_supply' (string)
linux.sysfs_path = '/sys/class/power_supply/ADP0' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Video Bus' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string)
input.device = '/dev/input/event5' (string)
input.product = 'Video Bus' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'jp,jp' (string)
input.xkb.model = 'jp106' (string)
input.xkb.options = 'grp:alt_shift_toggle,grp_led:scroll' (string)
input.xkb.rules = 'evdev' (string)
input.xkb.variant = '106,' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input5/event5' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string)
input.device = '/dev/input/event4' (string)
input.product = 'Power Button (CM)' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input4/event4' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = true (bool)
button.state.value = false (bool)
button.type = 'lid' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.switch', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Lid Switch' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event3' (string)
input.product = 'Lid Switch' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input3/event3' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (FF)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Power Button (FF)' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input2/event2' (string)

udi = '/org/freedesktop/Hal/devices/computer_backlight'
info.capabilities = {'laptop_panel'} (string list)
info.category = 'laptop_panel' (string)
info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic Backlight Device' (string)
info.subsystem = 'backlight' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_backlight' (string)
laptop_panel.access_method = 'general' (string)
laptop_panel.num_levels = 8 (0x8) (int)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'backlight' (string)
linux.sysfs_path = '/sys/class/backlight/acpi_video0' (string)
org.freedesktop.Hal.Device.LaptopPanel.method_argn ames = {'brightness_value', '} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_exec paths = {'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_name s = {'SetBrightness', 'GetBrightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_sign atures = {'i', '} (string list)

udi = '/org/freedesktop/Hal/devices/pnp_SYN190d'
info.linux.driver = 'i8042 aux' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (SYN190d)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_SYN190d' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.id = 'SYN190d' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
pnp.id = 'PNP0303' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.linux.driver = 'rtc_cmos' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.description = 'AT Real-Time Clock' (string)
pnp.id = 'PNP0b00' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0103)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
pnp.id = 'PNP0103' (string)

udi = '/org/freedesktop/Hal/devices/pnp_INT0800'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (INT0800)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.id = 'INT0800' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0a08)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.id = 'PNP0a08' (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.linux.driver = 'serial8250' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (serial8250)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/serial8250' (string)
platform.id = 'serial8250' (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)

udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
info.linux.driver = 'iTCO_wdt' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (iTCO_wdt)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/iTCO_wdt' (string)
platform.id = 'iTCO_wdt' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'i8042' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'
info.linux.driver = 'psmouse' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX3 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio4' (string)
serio.description = 'i8042 AUX3 port' (string)
serio.id = 'serio4' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'
info.capabilities = {'input', 'input.touchpad'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
info.product = 'SynPS/2 Synaptics TouchPad' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input' (string)
input.device = '/dev/input/event8' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
input.product = 'SynPS/2 Synaptics TouchPad' (string)
input.x11_driver = 'synaptics' (string)
linux.device_file = '/dev/input/event8' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input8/event8' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port'
info.linux.driver = 'psmouse' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX2 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio3' (string)
serio.description = 'i8042 AUX2 port' (string)
serio.id = 'serio3' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port' (string)
info.product = 'PS/2 Generic Mouse' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port_logicaldev_input' (string)
input.device = '/dev/input/event7' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port' (string)
input.product = 'PS/2 Generic Mouse' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input7/event7' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX1 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio2' (string)
serio.description = 'i8042 AUX1 port' (string)
serio.id = 'serio2' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX0 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string)
serio.description = 'i8042 AUX0 port' (string)
serio.id = 'serio1' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event0' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'jp,jp' (string)
input.xkb.model = 'jp106' (string)
input.xkb.options = 'grp:alt_shift_toggle,grp_led:scroll' (string)
input.xkb.rules = 'evdev' (string)
input.xkb.variant = '106,' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input0/event0' (string)

udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (eisa.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/eisa.0' (string)
platform.id = 'eisa.0' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27da'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) SMBus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27da' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string)
pci.product = '82801G (ICH7 Family) SMBus Controller' (string)
pci.product_id = 10202 (0x27da) (int)
pci.subsys_product_id = 55 (0x37) (int)
pci.subsys_vendor = 'Inventec Corporation' (string)
pci.subsys_vendor_id = 4464 (0x1170) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c4'
info.linux.driver = 'ata_piix' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801GBM/GHM (ICH7 Family) SATA IDE Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 143 (0x8f) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.product = '82801GBM/GHM (ICH7 Family) SATA IDE Controller' (string)
pci.product_id = 10180 (0x27c4) (int)
pci.subsys_product_id = 55 (0x37) (int)
pci.subsys_vendor = 'Inventec Corporation' (string)
pci.subsys_vendor_id = 4464 (0x1170) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27df'
info.linux.driver = 'ata_piix' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) IDE Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 138 (0x8a) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.product = '82801G (ICH7 Family) IDE Controller' (string)
pci.product_id = 10207 (0x27df) (int)
pci.subsys_product_id = 55 (0x37) (int)
pci.subsys_vendor = 'Inventec Corporation' (string)
pci.subsys_vendor_id = 4464 (0x1170) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0' (string)
scsi_host.host = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'FUJITSU MHV2040A' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHV2040AH_NT38T74295LU '
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHV2040AH_NT38T74295LU ' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0' (string)
info.product = 'FUJITSU MHV2040A' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHV2040AH_NT38T74295LU ' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda' (string)
storage.automount_enabled_hint = false (bool)
storage.bus = 'scsi' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '0000' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'FUJITSU MHV2040A' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 40007761920 (0x950a60000) (uint64)
storage.requires_eject = false (bool)
storage.serial = '1ATA_FUJITSU_MHV2040AH_NT38T74295LU' (string)
storage.size = 40007761920 (0x950a60000) (uint64)
storage.vendor = 'ATA' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_f164ce01_0224_459f_a8a8_b69e0e52cc34'
block.device = '/dev/sda5' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 5 (0x5) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHV2040AH_NT38T74295LU ' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHV2040AH_NT38T74295LU ' (string)
info.product = 'Volume (swap)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_f164ce01_0224_459f_a8a8_b69e0e52cc34' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda5' (string)
storage.model = ' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'swap' (string)
volume.fsusage = 'other' (string)
volume.fsversion = '2' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = ' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = ' (string)
volume.num_blocks = 3293262 (0x32404e) (uint64)
volume.partition.media_size = 40007761920 (0x950a60000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.start = 38321611776 (0x8ec256400) (uint64)
volume.size = 1686150144 (0x64809c00) (uint64)
volume.uuid = 'f164ce01-0224-459f-a8a8-b69e0e52cc34' (string)

udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHV2040AH_NT38T74295LU ' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHV2040AH_NT38T74295LU ' (string)
info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda2' (string)
storage.model = ' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = ' (string)
volume.fsusage = ' (string)
volume.fsversion = ' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = ' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = ' (string)
volume.num_blocks = 2 (0x2) (uint64)
volume.partition.media_size = 40007761920 (0x950a60000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.start = 38321579520 (0x8ec24e600) (uint64)
volume.size = 1024 (0x400) (uint64)
volume.uuid = ' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_049007be_0c67_49fc_88fe_aee2ff9ed284'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHV2040AH_NT38T74295LU ' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHV2040AH_NT38T74295LU ' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_049007be_0c67_49fc_88fe_aee2ff9ed284' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signature s = {'ssas', 'as', 'as'} (string list)
storage.model = ' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = ' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/' (string)
volume.num_blocks = 74846772 (0x4761234) (uint64)
volume.partition.flags = {'boot'} (string list)
volume.partition.label = ' (string)
volume.partition.media_size = 40007761920 (0x950a60000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = ' (string)
volume.size = 38321547264 (0x8ec246800) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '049007be-0c67-49fc-88fe-aee2ff9ed284' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0_scsi_gene ric'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_device_lun0_scsi_gene ric' (string)
linux.device_file = '/dev/sg0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg0' (string)
scsi_generic.device = '/dev/sg0' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27b9'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801GBM (ICH7-M) LPC Interface Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27b9' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.product = '82801GBM (ICH7-M) LPC Interface Bridge' (string)
pci.product_id = 10169 (0x27b9) (int)
pci.subsys_product_id = 55 (0x37) (int)
pci.subsys_vendor = 'Inventec Corporation' (string)
pci.subsys_vendor_id = 4464 (0x1170) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801 Mobile PCI Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.product = '82801 Mobile PCI Bridge' (string)
pci.product_id = 9288 (0x2448) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/pci_104c_803c'
info.linux.driver = 'sdhci-pci' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'PCIxx12 SDA Standard Compliant SD Host Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_803c' (string)
info.vendor = 'Texas Instruments' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.3' (string)
pci.device_class = 8 (0x8) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.3' (string)
pci.product = 'PCIxx12 SDA Standard Compliant SD Host Controller' (string)
pci.product_id = 32828 (0x803c) (int)
pci.subsys_product_id = 55 (0x37) (int)
pci.subsys_vendor = 'Inventec Corporation' (string)
pci.subsys_vendor_id = 4464 (0x1170) (int)
pci.vendor = 'Texas Instruments' (string)
pci.vendor_id = 4172 (0x104c) (int)

udi = '/org/freedesktop/Hal/devices/pci_104c_803c_mmc_host'
info.capabilities = {'mmc_host'} (string list)
info.category = 'mmc_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_104c_803c' (string)
info.product = 'MMC/SD Host Adapter' (string)
info.subsystem = 'mmc_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_803c_mmc_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'mmc_host' (string)
linux.sysfs_path = '/sys/class/mmc_host/mmc0' (string)
mmc_host.host = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/pci_104c_803b'
info.linux.driver = 'tifm_7xx1' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = '5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_803b' (string)
info.vendor = 'Texas Instruments' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.2' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.2' (string)
pci.product = '5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)' (string)
pci.product_id = 32827 (0x803b) (int)
pci.subsys_product_id = 55 (0x37) (int)
pci.subsys_vendor = 'Inventec Corporation' (string)
pci.subsys_vendor_id = 4464 (0x1170) (int)
pci.vendor = 'Texas Instruments' (string)
pci.vendor_id = 4172 (0x104c) (int)

udi = '/org/freedesktop/Hal/devices/pci_104c_8039'
info.linux.driver = 'yenta_cardbus' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'PCIxx12 Cardbus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_8039' (string)
info.vendor = 'Texas Instruments' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 7 (0x7) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:06.0' (string)
pci.product = 'PCIxx12 Cardbus Controller' (string)
pci.product_id = 32825 (0x8039) (int)
pci.subsys_product_id = 55 (0x37) (int)
pci.subsys_vendor = 'Inventec Corporation' (string)
pci.subsys_vendor_id = 4464 (0x1170) (int)
pci.vendor = 'Texas Instruments' (string)
pci.vendor_id = 4172 (0x104c) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_27cc'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string)
pci.product_id = 10188 (0x27cc) (int)
pci.subsys_product_id = 55 (0x37) (int)
pci.subsys_vendor = 'Inventec Corporation' (string)
pci.subsys_vendor_id = 4464 (0x1170) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 8 (0x8) (int)
usb_device.product = '2.0 root hub' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.serial = '0000:00:1d.7' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'FO13FF-68 PC-CAM' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04' (string)
info.vendor = 'Cheng Uei Precision Industry Co., Ltd (Foxlink)' (string)
linux.device_file = '/dev/bus/usb/001/003' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 239 (0xef) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 260 (0x104) (int)
usb_device.device_subclass = 2 (0x2) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 3 (0x3) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5' (string)
usb_device.max_power = 98 (0x62) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 2 (0x2) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'FO13FF-68 PC-CAM' (string)
usb_device.product_id = 265 (0x109) (int)
usb_device.serial = '1.04' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Cheng Uei Precision Industry Co., Ltd (Foxlink)' (string)
usb_device.vendor_id = 1480 (0x5c8) (int)
usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if1'
info.linux.driver = 'uvcvideo' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04' (string)
info.product = 'USB Video Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.1' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 239 (0xef) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 260 (0x104) (int)
usb.device_subclass = 2 (0x2) (int)
usb.interface.class = 14 (0xe) (int)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 2 (0x2) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.1' (string)
usb.max_power = 98 (0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Video Interface' (string)
usb.product_id = 265 (0x109) (int)
usb.serial = '1.04' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Cheng Uei Precision Industry Co., Ltd (Foxlink)' (string)
usb.vendor_id = 1480 (0x5c8) (int)
usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if0'
info.linux.driver = 'uvcvideo' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04' (string)
info.product = 'USB Video Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 239 (0xef) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 260 (0x104) (int)
usb.device_subclass = 2 (0x2) (int)
usb.interface.class = 14 (0xe) (int)
usb.interface.description = 'FO13FF-68 PC-CAM' (string)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0' (string)
usb.max_power = 98 (0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Video Interface' (string)
usb.product_id = 265 (0x109) (int)
usb.serial = '1.04' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Cheng Uei Precision Industry Co., Ltd (Foxlink)' (string)
usb.vendor_id = 1480 (0x5c8) (int)
usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if0_video4linux'
access_control.file = '/dev/video0' (string)
access_control.type = 'video4linux' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'video4linux', 'video4linux.video_capture', 'access_control'} (string list)
info.category = 'video4linux' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if0' (string)
info.product = 'FO13FF-68 PC-CAM' (string)
info.subsystem = 'video4linux' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if0_video4linux' (string)
linux.device_file = '/dev/video0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'video4linux' (string)
linux.sysfs_path = '/sys/class/video4linux/video0' (string)
video4linux.device = '/dev/video0' (string)
video4linux.version = '1' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if0_logicaldev_input'
button.has_state = false (bool)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if0' (string)
info.product = 'FO13FF-68 PC-CAM' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if0_logicaldev_input' (string)
input.device = '/dev/input/event6' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_5c8_109_1_04_if0' (string)
input.product = 'FO13FF-68 PC-CAM' (string)
linux.device_file = '/dev/input/event6' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input6/event6' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_18e8_6238_noserial'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = '802.11 bg WLAN' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_18e8_6238_noserial' (string)
info.vendor = 'Qcom' (string)
linux.device_file = '/dev/bus/usb/001/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 1 (0x1) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4' (string)
usb_device.max_power = 300 (0x12c) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = '802.11 bg WLAN' (string)
usb_device.product_id = 25144 (0x6238) (int)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Qcom' (string)
usb_device.vendor_id = 6376 (0x18e8) (int)
usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_18e8_6238_noserial_if0'
info.linux.driver = 'rt73usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_18e8_6238_noserial' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_18e8_6238_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 1 (0x1) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0' (string)
usb.max_power = 300 (0x12c) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 25144 (0x6238) (int)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Qcom' (string)
usb.vendor_id = 6376 (0x18e8) (int)
usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/net_00_0d_f0_42_3f_6d_0'
info.capabilities = {'net', 'net.80211control'} (string list)
info.category = 'net.80211control' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_18e8_6238_noserial_if0' (string)
info.product = 'Networking Wireless Control Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_0d_f0_42_3f_6d_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/wmaster0' (string)
net.address = '00:0d:f0:42:3f:6d' (string)
net.arp_proto_hw_id = 801 (0x321) (int)
net.interface = 'wmaster0' (string)
net.linux.ifindex = 3 (0x3) (int)
net.originating_device = '/org/freedesktop/Hal/devices/usb_device_18e8_6238_noserial_if0' (string)

udi = '/org/freedesktop/Hal/devices/net_00_0d_f0_42_3f_6d'
info.capabilities = {'net', 'net.80211'} (string list)
info.category = 'net.80211' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_18e8_6238_noserial_if0' (string)
info.product = 'WLAN Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_0d_f0_42_3f_6d' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/wlan0' (string)
net.80211.mac_address = 59865448301 (0xdf0423f6d) (uint64)
net.address = '00:0d:f0:42:3f:6d' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'wlan0' (string)
net.linux.ifindex = 4 (0x4) (int)
net.originating_device = '/org/freedesktop/Hal/devices/usb_device_18e8_6238_noserial_if0' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 8 (0x8) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 2 (0x2) (int)
usb.serial = '0000:00:1d.7' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_27cb'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string)
pci.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string)
pci.product_id = 10187 (0x27cb) (int)
pci.subsys_product_id = 55 (0x37) (int)
pci.subsys_vendor = 'Inventec Corporation' (string)
pci.subsys_vendor_id = 4464 (0x1170) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/005/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5' (string)
usb_device.bus_number = 5 (0x5) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.3' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_14e1_6000_noserial'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string)
info.product = 'PenMount USB' (string)
info.subsystem = 'usb_device' (string)
info.udi =
 

Thread Tools




All times are GMT. The time now is 05:53 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org