FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Ubuntu > Ubuntu Kernel Team

 
 
LinkBack Thread Tools
 
Old 08-26-2010, 04:12 PM
John Rigby
 
Default linux-linaro pull request

thx!

On Thu, Aug 26, 2010 at 10:11 AM, Tim Gardner <tim.gardner@canonical.com> wrote:
> On 08/26/2010 08:38 AM, Tim Gardner wrote:
>>
>> On 08/26/2010 03:40 AM, John Rigby wrote:
>>>
>>> Tim,
>>>
>>> Here is the latest just before the freeze. I started with the
>>> Ubuntu-2.6.35-19.25 merged linux-linaro-2.6.35 then rebased my
>>> previous linaro packaging patches on top of the result.
>>>
>>> The following changes since commit
>>> 978e830c47ca5de5824ddf3ba9f7d3571da765a7:
>>> Leann Ogasawara (1):
>>> UBUNTU: Ubuntu-2.6.35-19.25
>>>
>>> are available in the git repository at:
>>>
>>> git://git.linaro.org/ubuntu/linux-linaro.git linaro
>>>
>>
>> This seemed like a lot of changes for a Beta upload so I did a raw diff
>> between the Maverick tree and your pull request. I noticed some
>> differences that imply you didn't get the rebase against Maverick
>> completely correct. For example, your tree still has ubuntu/lirc whilst
>> Maverick does not. As expected, most of the other changes were in the
>> arm arch directories, but there were some missing changes to the debian
>> directory, e.g., 'UBUNTU: Pass DEB_MAINT_PARAMS to hook scripts'.
>>
>> I'm fine with uploading this if you are sure its what you want. Have you
>> checked that it produces runnable images?
>>
>> rtg
>
> Never mind. If I could just actually _pull_ the bits correctly, then just
> _maybe_ everything would look correct.
>
> I'll get this uploaded forthwith.
>
> rtg
> --
> Tim Gardner tim.gardner@canonical.com
>

--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
 
Old 08-28-2010, 03:36 AM
John Rigby
 
Default linux-linaro pull request

The following changes since commit 7a949698c262fab1f0ecac8adf3ceb7eaafa8c8c:
John Rigby (1):
LINARO: Linaro-2.6.35-1004.8

are available in the git repository at:

git://git.linaro.org/ubuntu/linux-linaro.git linaro

John Rigby (2):
LINARO: Start new release
LINARO: Linaro-2.6.35-1004.9

Mike Rapoport (1):
OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings

Robert Nelson (3):
ARM: OMAP: Beagle: revision detection
ARM: OMAP: Beagle: only Cx boards use pin 23 for write protect
ARM: OMAP: Beagle: no gpio_wp pin connection on xM

arch/arm/mach-omap2/board-omap3beagle.c | 93 +++++-
arch/arm/plat-omap/include/plat/vram.h | 1 +
debian.linaro/abi/2.6.35-1003.7/abiname | 1 -
debian.linaro/abi/2.6.35-1004.8/abiname | 1 +
.../armel/linaro-mx51 | 169 +++++-----
.../armel/linaro-mx51.modules | 0
.../armel/linaro-omap | 369 ++++++++++----------
.../armel/linaro-omap.modules | 6 +
.../armel/linaro-vexpress | 3 +
.../armel/linaro-vexpress.modules | 0
debian.linaro/changelog | 15 +
drivers/video/omap2/omapfb/omapfb-main.c | 2 +-
drivers/video/omap2/vram.c | 10 +
13 files changed, 406 insertions(+), 264 deletions(-)
delete mode 100644 debian.linaro/abi/2.6.35-1003.7/abiname
create mode 100644 debian.linaro/abi/2.6.35-1004.8/abiname
rename debian.linaro/abi/{2.6.35-1003.7 =>
2.6.35-1004.8}/armel/linaro-mx51 (98%)
rename debian.linaro/abi/{2.6.35-1003.7 =>
2.6.35-1004.8}/armel/linaro-mx51.modules (100%)
rename debian.linaro/abi/{2.6.35-1003.7 =>
2.6.35-1004.8}/armel/linaro-omap (97%)
rename debian.linaro/abi/{2.6.35-1003.7 =>
2.6.35-1004.8}/armel/linaro-omap.modules (99%)
rename debian.linaro/abi/{2.6.35-1003.7 =>
2.6.35-1004.8}/armel/linaro-vexpress (99%)
rename debian.linaro/abi/{2.6.35-1003.7 =>
2.6.35-1004.8}/armel/linaro-vexpress.modules (100%)

--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
 
Old 08-30-2010, 01:28 PM
Tim Gardner
 
Default linux-linaro pull request

On 08/27/2010 09:36 PM, John Rigby wrote:
> The following changes since commit 7a949698c262fab1f0ecac8adf3ceb7eaafa8c8c:
> John Rigby (1):
> LINARO: Linaro-2.6.35-1004.8
>
> are available in the git repository at:
>
> git://git.linaro.org/ubuntu/linux-linaro.git linaro
>
> John Rigby (2):
> LINARO: Start new release
> LINARO: Linaro-2.6.35-1004.9
>
> Mike Rapoport (1):
> OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings
>
> Robert Nelson (3):
> ARM: OMAP: Beagle: revision detection
> ARM: OMAP: Beagle: only Cx boards use pin 23 for write protect
> ARM: OMAP: Beagle: no gpio_wp pin connection on xM
>
> arch/arm/mach-omap2/board-omap3beagle.c | 93 +++++-
> arch/arm/plat-omap/include/plat/vram.h | 1 +
> debian.linaro/abi/2.6.35-1003.7/abiname | 1 -
> debian.linaro/abi/2.6.35-1004.8/abiname | 1 +
> .../armel/linaro-mx51 | 169 +++++-----
> .../armel/linaro-mx51.modules | 0
> .../armel/linaro-omap | 369 ++++++++++----------
> .../armel/linaro-omap.modules | 6 +
> .../armel/linaro-vexpress | 3 +
> .../armel/linaro-vexpress.modules | 0
> debian.linaro/changelog | 15 +
> drivers/video/omap2/omapfb/omapfb-main.c | 2 +-
> drivers/video/omap2/vram.c | 10 +
> 13 files changed, 406 insertions(+), 264 deletions(-)
> delete mode 100644 debian.linaro/abi/2.6.35-1003.7/abiname
> create mode 100644 debian.linaro/abi/2.6.35-1004.8/abiname
> rename debian.linaro/abi/{2.6.35-1003.7 =>
> 2.6.35-1004.8}/armel/linaro-mx51 (98%)
> rename debian.linaro/abi/{2.6.35-1003.7 =>
> 2.6.35-1004.8}/armel/linaro-mx51.modules (100%)
> rename debian.linaro/abi/{2.6.35-1003.7 =>
> 2.6.35-1004.8}/armel/linaro-omap (97%)
> rename debian.linaro/abi/{2.6.35-1003.7 =>
> 2.6.35-1004.8}/armel/linaro-omap.modules (99%)
> rename debian.linaro/abi/{2.6.35-1003.7 =>
> 2.6.35-1004.8}/armel/linaro-vexpress (99%)
> rename debian.linaro/abi/{2.6.35-1003.7 =>
> 2.6.35-1004.8}/armel/linaro-vexpress.modules (100%)

uploaded

--
Tim Gardner tim.gardner@canonical.com

--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
 
Old 09-08-2010, 11:22 PM
John Rigby
 
Default linux-linaro pull request

Tim,

These changes only appear huge because I am rebasing against a rebased Ubuntu,
so all the linux-linaro-2.6.35 changes show up as new.

The following changes since commit 7825dff500c8bc787190037cc40c84178f7576f8:
Leann Ogasawara (1):
UBUNTU: Ubuntu-2.6.35-20.29

are available in the git repository at:

git://git.linaro.org/ubuntu/linux-linaro.git linaro


Amit Kucheria (2):
arm: mxc: utilise usecount field in clock operations
mxc: Fix pad names for imx51

Anand Gadiyar (3):
OMAP3: wait on IDLEST after enabling USBTLL fclk
OMAP3630: Add ES1.1 and ES1.2 detection
omap: 3630: disable TLL SAR on 3630 ES1

Anton Vorontsov (4):
ARM: cns3xxx: Use IO memory accessors everywhere
ARM: cns3xxx: Add support for PCI Express ports
ARM: cns3xxx: Add support for SDHCI controllers
ARM: cns3xxx: Add support for AHCI controllers

Arnaud Patard (1):
[ARM] qnap tsx1x: fix section mismatch

Artem Bityutskiy (1):
omap: device: improve errors handling

Baruch Siach (13):
mxc_nand: add support for platform defined partitions
mx25: add platform code for imx-keypad
mx25pdk: add keypad support
mx25: add watchdog clock
mx25pdk: register watchdog device
mx25: add a comment documenting undocumented IPG clocks
mx27: add support for the CSI device
mx25: add support for the CSI device
mx25: add iomux defines for UART4 on KPP pins
mx25: add PWM4 to iomux
arm/imx/gpio: add spinlock protection
mx2_camera: Add soc_camera support for i.MX25/i.MX27
mx2_camera: fix type of dma buffer virtual address pointer

Benjamin Herrenschmidt (3):
net/phy/marvell: Expose IDs and flags in a .h and add dns323
LEDs setup flag
[ARM] orion5x: Base support for DNS-323 rev C1
[ARM] orion5x: Fix soft-reset for some platforms

Benjamin Zores (1):
[ARM] Kirkwood: update MPP definition.

Benoit Cousson (1):
OMAP2&3: hwmod: Remove _hwmod prefix in name string

Catalin Marinas (18):
ARM: Correct the cpu_architecture() function for ARMv7
smsc911x: Add spinlocks around registers access
kmemleak: Show more information for objects found by alias
kmemleak: Add DocBook style comments to kmemleak.c
kbuild: Warn on selecting symbols with unmet direct dependencies
ARM: Mark CPU_32v6K as depended on CPU_V7
ARM: Add support for the MOVW/MOVT relocations in Thumb-2
ARM: Remove dummy loads from the original relocation address
ARM: Do not compile the Thumb-2 module relocations on an ARM kernel
ARM: Allow lazy cache flushing via PG_arch_1 for highmem pages
ARM: Assume new page cache pages have dirty D-cache
ARM: Introduce __sync_icache_dcache() for VIPT caches
ARM: Use lazy cache flushing on ARMv7 SMP systems
ARM: Remove superfluous flush_kernel_dcache_page()
ARM: Implement phys_mem_access_prot() to avoid attributes aliasing
ARM: Improve the L2 cache performance when PL310 is used
ARM: Remove the domain switching on ARMv6k/v7 CPUs
ARM: VExpress: Set bit 22 in the PL310 (cache controller) AuxCtlr register

Chris Wilson (1):
lib/scatterlist: Hook sg_kmalloc into kmemleak (v2)

Christoph Egger (8):
Replace dead OMAP_MUX_ERRORS with OMAP_MUX_WARNINGS
Removing dead OMAP_IR
Removing dead OMAP_DSP
Removing dead OMAP_STI
Replacing LEDS_OMAP_DEBUG with OMAP_DEBUG_LEDS
Removing dead APM
Removing dead MACH_OMAP_H4_OTG
Removing dead MACH_OMAP2_H4_USB1

Cory Maccarrone (1):
omap1: omap7xx clocks, mux, serial fixes

Daniel Mack (2):
ARM: mx3: pcm037: remove unused variable
ARM: mx3: mx31lilly: pass mc13783 SPI IRQ pin

Dave Martin (9):
perf report: Don't abbreviate file paths relative to the cwd
perf tools: Remove unneeded code for tracking the cwd in perf sessions
perf tools: Factor out buildid reading and make it implicit in dso__load
perf tools: remove extra build-id check factored into dso__load
perf symbols: Improve debug image search when loading symbols
perf events: Fix mmap offset determination
perf symbols: work around incorrect ET_EXEC symbol adjustment
perf symbols: Ignore mapping symbols on ARM
perf symbols: fix symbol offset breakage with separated debug

David Anders (1):
omap4: Add OMAP4 Panda Support

Deepak K (1):
omap2/3/4: serial: errata i202: fix for MDR1 access

Dinh Nguyen (2):
mx5: Add i2c to Freescale MX51 Babbage HW
mx5: Register i2c on Freescale MX51 Babbage HW

Dmitry Eremin-Solenikov (2):
ARM: 6162/1: at91sam9g20ek: add fixed-value regulator for wm8731
ARM: 6163/1: at91sam9g20ek: add fixed-value regulator for wm8731

Dmytro Milinevskyy (1):
[ARM] Marvell OpenRD-Ultimate machine support

Eric Bénard (35):
eukrea_mbimx27-baseboard: fix typo in display name
eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controls
eukrea_mbimx27-baseboard: add timings for DVI output
cpuimx27 and mbimx27: allow fine control of UART4 and SDHC2 usage
mach-cpuimx27: fix QuadUART's IRQ typo in pins'setup
eukrea_mbimx27: fix ADS7846 support
mach-cpuimx27: add USB Host2 and OTG support
mach-cpuimx27: register wdt and w1_master resources
mxcmmc: add card detect through DAT3 possibility
eukrea_mbimx27: use card detect through DAT3 for SDHC1
MX2X: Add Keypad device definition for MX2X arch
eukrea_mbimx27: add support for the keyboard
eukrea_mbimx27: add audio codec
i.MX35: return IPU clock's value for mx3fb
mach-cpuimx27: fix USB_ULPI build warnings
eukrea_mbimx27: fix audio support when SOC is compiled as module
i.MX27: add suspend to RAM support
MX25: put define for OTG base address in right include
plat-mxc/ehci.c: add i.MX25 support
i.MX25: fix get_rate_otg to return the correct value
i.MX25: fix EHCI support
i.MX25: fix USB gadget support
i.MX25: add AUDMUX and SSI support
i.MX25: add cpuimx25 module and its baseboard
i.MX35: add cpuimx35 support and its baseboard
mxcmmc: convert to pm_ops and enable/disable clock
imx25: fix low level debug
imxfb: add pwmr controlled backlight support
eukrea_mbimx27-baseboard: fix compile when CONFIG_SPI_IMX is disabled
i.MX51: handle IRQ for gpio 16..31
iomux-mx51: add 4 pin definitions
mbimxsd baseboards : remove unnecessary include
Fix KConfig warning
eukrea-baseboards: merge includes in one file
i.MX51: add support for cpuimx51 module and its baseboard

Eric Miao (2):
ARM: Remove unused PARAMS_PHYS from arch/arm/boot/compressed
ARM: Auto calculate ZRELADDR and provide option for exceptions

Fabio Estevam (1):
mx31_3ds: Handle USB OTG GPIO Errors

Felipe Contreras (13):
omap: mailbox: trivial cleanups
omap: mailbox: reorganize structures
omap: mailbox: 2420 should be detected at run-time
omap: mailbox: use correct config for omap1
omap: mailbox: update omap1 probing
omap: mailbox: don't export unecessary symbols
omap: mailbox: remove unecessary fields
omap: mailbox: add IRQ names
omap: mailbox: reorganize registering
omap: mailbox: simplify omap_mbox_register()
omap: mailbox: only compile for configured archs
omap: mailbox: standarize on 'omap-mailbox'
omap: mailbox: reorganize headers

Fernando Guzman Lugo (4):
Mailbox: free mailbox interrupt before freeing blk queue
Mailbox: flush pending deferred works before freeing blk queue
Mailbox: Check valid registered callback before calling
Mailbox: disable mailbox interrupt when request queue

Govindraj R (1):
omap3: serial: Add context save and restore for mcr

Grazvydas Ignotas (3):
omap3: pandora: update gpio-keys data
omap3: pandora: add NAND and wifi support
omap: mux: fix multipath gpio handling

Harro Haan (1):
ARM: 5967/1: at91_udc.c use spinlocks instead of local_irq_xxx

Hartley Sweeten (3):
ARM: 6167/1: ep93xx: register backlight driver
ARM: 6168/1: ep93xx: move physmap flash registration into core.c
ARM: 6174/1: ep93xx: clear devcfg bits before setting them

Helge Deller (1):
PARISC: led.c - fix potential stack overflow in led_proc_write()

Hemanth V (1):
OMAP4: Add GPIO LED support for SDP board

Hiroshi DOYU (6):
omap iommu: Introduce iopgd_is_table MACRO
omap iommu: Rename iopte_[p,v]addr -> iopte_page_[p,v]addr
omap iommu: move iommu_disable at fault to the above layer
omap iommu: Make omap-iommu.o built-in
Mailbox: new mutext lock for h/w mailbox configuration
omap mailbox: Set a device in logical mbox instance for traceability

Jarkko Nikula (4):
omap: rx51: Set regulator V28 always on
omap: rx51: Add platform_data for tlv320aic3x with reset gpionumber
omap: rx51: Use REGULATOR_SUPPLY macro when
initializingregulator consumers
omap: rx51: Add supply and data for the tpa6130a2 headphoneamplifier

Jason Baron (1):
kmemleak: Introduce a default off mode for kmemleak

Jason Wang (10):
mx51/iomux: Fix mux mode and input path for two pads
mx51/iomux: add UART and GPIO pad definitions for imx51_3ds board
mxc/iomux: add GPIO bank offset for iomux v3 platforms
mxc: add common debug board for 3-stack platforms
mx31_3ds: revert 3ds debug board relate code
mx51_3ds: Add support for the imx51 3-stack board
mx51: add imx_keypad device definition for mx51 platforms
mx51_3ds: add keypad support on 3ds platform
imx: move gpio init after to irq init
omap: Fix DEBUG_LL uart to access phys addr when MMU isn't enable

John Rigby (26):
omap3 nand: fix missing gpmc_prefetch_reset param
Merge branch 'linux-linaro-2.6.35-8Sep2010' and Ubuntu-2.6.35-20.29
LINARO: Add debian.linaro packaging
LINARO: select debian.linaro packaging
LINARO: [Config] Update configs for new upstream
LINARO: Start new release
LINARO: Linaro-2.6.35-1001-5
LINARO: [Config] Fix vexpress config
LINARO: [Config] Add mx51 flavour
LINARO: Start new release
LINARO: [config] Update vexpress config
LINARO: Linaro-2.6.35-1003.7
LINARO: Start new release
LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-19.25 merge
LINARO: [Config] Update configs
LINARO: Bump ABI
LINARO: Linaro-2.6.35-1004.8
LINARO: Start new release
LINARO: Linaro-2.6.35-1004.9
LINARO: Start new release
LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-20.29 merge
LINARO: [Config] Turn on CONFIG_HIGHMEM for vexpress
LINARO: Update Vcs-Git
LINARO: add Recommends uboot-mkimage
LINARO: Bump ABI
LINARO: Linaro-2.6.35.1005.10

Kan-Ru Chen (5):
OMAP2: Devkit8000: Enable DVI-D output
OMAP2: Devkit8000: Setup LCD reset
omap: Add new interface omap_get_die_id
omap: Use omap_get_die_id() to get the DIE ids
omap: Devkit8000: Use DIE id to initialize dm9000 MAC address

Kanigeri, Hari (3):
omap iommu: update irq mask to be specific about twl and tlb
omap iommu: add functionality to get TLB miss interrupt
omap iommu: update ducati mmu irq define name

Kevin Hilman (8):
OMAP24xx: CM: fix mask used for checking IDLEST status
OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST
OMAP: hwmod: add non-locking versions of enable and idle functions
OMAP: omap_device: ensure hwmod tracks attached omap_device pointer
OMAP: PM: create omap_devices for MPU, DSP, L3
OMAP: hwmod data: add class for IVA hwmods
OMAP2&3: hwmod: Replace l3 -> l3_main
OMAP3: hwmod data: add data for OMAP3 IVA2

Kevin Wells (11):
ARM: LPC32XX: Initial arch header files
ARM: LPC32XX: Debug and IRQ macros
ARM: LPC32XX: Clock driver
ARM: LPC32XX: GPIO, timer, and IRQ drivers
ARM: LPC32XX: System suspend support
ARM: LPC32XX: Serial support code
ARM: LPC32XX: Misc support functions
ARM: LPC32XX: Phytec 3250 platform support
ARM: LPC32XX: Arch config menu supoport and makefiles
ARM: Add support for the LPC32XX arch
Merge branch 'test' of ../test/linux-2.6-lpc2 into wells/lpc32xx-arch_v2

Kirill A. Shutemov (5):
ARM: 6252/1: Use SIGBUS for unaligned access instead of SIGILL
ARM: 6269/1: Add 'code' parameter for hook_fault_code()
ARM: 6255/1: Workaround infinity loop in handling of translation faults
ARM: 6256/1: Check arch version and modify fsr_info[] depends on
it at runtime
ARM: 6268/1: ARMv6K and ARMv7 use fault statuses 3 and 6 as
Access Flag fault

Leif Lindholm (1):
ARM: Add SWP/SWPB emulation for ARMv7 processors (v5)

Linus Torvalds (1):
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

Linus Walleij (17):
ARM: 6153/1: nomadik MTU to use dynamic shift and mult assignment
ARM: 6204/1: Fixups for the RealView PB1176
ARM: 6227/1: PL022 SSP platform data for the RealViews
ARM: 6228/1: PL022 SSP platform data for the Versatile
ARM: 6222/1: add memory types for the TCMs
ARM: 6223/1: support multiple TCM banks
ARM: 6224/1: print TCM whereabouts in init message
ARM: 6215/2: add character LCD platform data for RealView and Versatile
ARM: 6234/1: move SPEAr to use common mult/shift calculation code
ARM: 6159/1: Move IOP to use common mult/shift calculation code
ARM: 6214/2: driver for the character LCD found in ARM refdesigns
ARM: 6235/2: driver for the LEDs found in the later ARM refdesigns
ARM: 6264/1: fix Versatile Express LED oversight
ARM: 6225/1: make TCM allocation static and common for all archs
ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivative
ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivative
ARM: 6278/2: fix regression in RealView after the introduction of pclk

Luotao Fu (2):
pca100: add framebuffer device support and TFT
pca100: clean up GPIO pin multiplexing

Magnus Damm (3):
ARM: 6206/1: CONFIG_FORCE_MAX_ZONEORDER update for SH-Mobile ARM
ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128

Marc Kleine-Budde (5):
mx25: add flexcan address and interrupt definition
mx35: adjust flexcan clock definition
mx35: add flexcan address
imx: dynamically register flexcan devices for mx25 and mx35
pcm043: register flexcan device

Martin Michlmayr (6):
[ARM] Kirkwood: Export GPIO indicating jumper setting of JP1
[ARM] Kirkwood: Fix explanation of MPP45 for QNAP TS41x
[ARM] orion5x: Set links to solid on D-Link DNS-323
[ARM] Kirkwood: Add MPP44 (board ID) on TS-219
[ARM] Kirkwood: Add support for HP t5325 Thin Client
[ARM] Orion: DNS-323 C1 requires phylib

Mathias Nyman (1):
omap: tsl2563 ALS support for Nokia N900

Michael Bohan (1):
arm: mm: Don't free prohibited memmap entries

Michal Marek (1):
ARM: 6328/1: Build with -fno-dwarf2-cfi-asm

Mika Westerberg (6):
ARM: 6116/1: kdump: reserve memory for crashkernel
ARM: 6117/1: kdump: implement crash_setup_regs()
ARM: 6118/1: kdump: implement machine_crash_shutdown()
ARM: 6119/1: kdump: skip indirection page when crashing
ARM: 6120/1: kdump: implement copy_oldmem_page()
ARM: 6122/1: kdump: add support for elfcorehdr parameter

Mikael Pettersson (1):
ARM: 6329/1: wire up sys_accept4() on ARM

Mike Rapoport (2):
omap3: introduce omap3_map_io
OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings

Nicolas Ferre (2):
ARM: 6169/1: AT91: add new at91 chips in at91sam9g45 family
ARM: 6185/1: AT91: PM: dual ram controller support

Nicolas Pitre (19):
[ARM] implement arch_randomize_brk()
[ARM] add address randomization to mmap()
ARM: initial stack protector (-fstack-protector) support
ARM: stack protector: change the canary value per task
[ARM] Kirkwood: fix HP t5325 after commit 6605742f2a
[ARM] Kirkwood: more factorization of the PCIe init code
[ARM] Kirkwood: add missing machine targets to defconfig
Merge commit '7b70c4275f'
Merge remote branch 'catalin/stable-2.6.35'
Merge remote branch 'willd/for-linaro'
Merge commit 'd21872b'
Merge commit 'linaro_merge_100811'; commit 'v2.6.35.2' into
linaro_stable_10.11
Revert "perf symbols: work around incorrect ET_EXEC symbol adjustment"
Merge remote branch 'remotes/willd/perf-tools' into linaro_stable_10.11
ARM: fix ASLR of PIE executables
Merge commit 'v2.6.35.3' into linaro_stable_10.11
Merge commit 'v2.6.35.4' into linaro-2.6.35
ARM: link board specific files after core files
Merge remote branch 'willd/for-linaro-stable' into linaro-2.6.35

Nishanth Menon (4):
omap2/3/4: serial: remove initialization sparse warnings
omap2/3/4: serial: kill dev_attr_sleep_timeout sparse warn
omap2/3/4: serial: introduce errata handling
omap2/3: id: fix sparse warning

Ohad Ben-Cohen (6):
omap: zoom2: wlan board muxing
omap: zoom3: wlan board muxing
omap: mailbox: convert rwlocks to spinlock
omap: mailbox cleanup: split MODULE_AUTHOR line
omap: mailbox: remove (un)likely macros from cold paths
omap: mailbox: convert block api to kfifo

Olaf Rempel (1):
[ARM] orion/kirkwood: reset PCIe unit on boot

Paul Walmsley (9):
OMAP: clock: add kerneldoc for structures; move flags closer to structs
OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz
oscillator)
OMAP1: clock: some cleanup
OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module
idle in _setup()
OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods
OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_va
OMAP2+: hwmod/device: update documentation and copyright
OMAP: PM constraints: add return values; add requesting device
param to omap_pm_set_max_dev_wakeup_lat()
OMAP: PM constraints: add omap_pm_set_min_clk_rate()

Pavel Machek (1):
Add GPIO support for HTC Dream.

Rabin Vincent (24):
ARM: 6150/1: gic: implement set_type
ARM: 6147/1: nomadik-gpio: set val in ->direction_output()
ARM: 6148/1: nomadik-gpio: add function to configure pullup/pulldown
ARM: 6149/1: nomadik-gpio: add function to configure sleep mode behaviour
ARM: 6154/1: nomadik-gpio: refactor nmk_gpio_set_mode
ARM: 6155/1: nomadik-gpio: add pin configuration API
ARM: 6156/1: nomadik-gpio: switch to core_initcall
ARM: 6175/1: nomadik-gpio: implement set_wake
ARM: 6176/1: nomadik-gpio: implement to_irq
ARM: 6177/1: nomadik-gpio: fix "ignoring return value" warning
ARM: 6161/1: mop500: add basic pin configuration
ARM: 6160/1: ux500: add DB8500 pin configs
ARM: 6266/1: ux500: add separate irq lists for DB8500 and DB5500
ARM: 6267/1: mop500: add AB8500 interrupt support
ARM: 6237/1: mmci: use sg_miter API to fix multi-page sg handling
ARM: 6238/1: mmci: fix multi block transfers
ARM: 6239/1: mmci: let core poll for card detection
ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
ARM: 6244/1: mmci: add variant data and default MCICLOCK support
ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
ARM: 6287/1: ftrace: clean up mcount assembly indentation
ARM: 6288/1: ftrace: document mcount formats
ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR"

Rajendra Nayak (2):
OMAP4: hwmod: Enable omap_device build for OMAP4
omap4: suspend: Add basic system suspend support

Robert Nelson (3):
ARM: OMAP: Beagle: revision detection
ARM: OMAP: Beagle: only Cx boards use pin 23 for write protect
ARM: OMAP: Beagle: no gpio_wp pin connection on xM

Rogerio Pimentel (1):
mx27_3ds: add support for the keypad

Russell King (39):
ARM: Prohibit ioremap() on kernel managed RAM
ARM: Remove support for LinkUp Systems L7200 SDP.
Merge git://git.linaro.org/nico/arm_security into devel-stable
ARM: Precalculate vmalloc_min
ARM: Remove DISCONTIGMEM support
ARM: Remove 'node' argument form arch_adjust_zones()
ARM: Move platform memory reservations out of generic code
ARM: OMAP: Cleanup OMAP FB SDRAM reservation
ARM: OMAP: Convert to use ->reserve method to reserve boot time memory
ARM: early_alloc()
Merge branch 'l7200' into devel
Merge git://git.kernel.org/.../nico/orion into devel-stable
ARM: AMBA: Add pclk definition for platforms using primecells
Merge branch 'master' of
git://git.infradead.org/users/cbou/linux-cns3xxx into devel-stable
ARM: fix build warning in asm/elf.h
ARM: early_pte_alloc()
ARM: initial LMB trial
ARM: Convert platform reservations to use LMB rather than bootmem
ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMB
ARM: LMB: Convert arm_memory_present() to use LMB memory information
ARM: LMB: convert pfn_valid to use LMB
ARM: Remove unnecessary call to find_limits()
ARM: Versatile: fix section mismatch
Merge branch 'origin' into misc
ARM: use generic ioremap_page_range()
ARM: DMA coherent allocator: align remapped addresses
ARM: Factor out common code from cpu_proc_fin()
ARM: SMP: Always enable clock event broadcast support
ARM: call machine_shutdown() from machine_halt(), etc
ARM: Fix section build warnings for AMBA drivers
Merge branch 'wells/lpc32xx-arch_v2' of
git://git.lpclinux.com/linux-2.6-lpc into devel-stable
Merge branch 'for-rmk' of
git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable
Merge branch 'arm/booting' of
git://git.pengutronix.de/git/ukl/linux-2.6 into devel-stable
ARM: AMBA: Add pclk support to AMBA bus infrastructure
Merge branch 'shmobile' into devel
Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb',
'nomadik', 'nuc', 'pl', 'spear' and 'versatile' into devel
Merge branch 'misc' into devel
Merge branch 'devel-stable' into devel
ARM: Tighten check for allowable CPSR values

Ryan Mallon (3):
ARM: 6200/1: AT91: Define NR_BUILTIN_GPIO
ARM: 6209/2: at91: Add support for Bluewater Systems Snapper
9260/9G20 modules
ARM: 6209/3: at91_udc: Add vbus polarity and polling mode

Saeed Bishara (6):
[ARM] Kirkwood: configure NAND mpp's for db88f6281
[ARM] Kirkwood: add support for rev A1 of the 88f6192 and 88f6180 chips.
[ARM] Kirkwood: Add support for 88f6282
[ARM] PCI: add platform private data to pci_sys_data
[ARM] Kirkwood: add support for PCIe1
[ARM] Dove: platform device registration for the sdio interfaces

Samu Onkalo (1):
omap: dma: Support for prefetch in destination synchronizedtransfer

Santosh Shilimkar (3):
omap4: mmc: Fix the regulator resource for MMC2 on 4430sdp
omap4: Add smc API to read AuxCoreBoot0 register
omap4: hotplug: Add basic CPU hotplug support

Sascha Hauer (2):
mxc_nand: Fix OOB handling
mx25: flexcan clock support

Sergio Aguirre (1):
omap3: Unify omap2_set_globals_3[43,6x]x functions

Shubhrajyoti Datta (1):
omap4: Board changes for 4430sdp tmp105 temperature sensor

Simon Guinot (3):
[ARM] Kirkwood: add LaCie Network Space Max v2 support
leds: add LED driver for Network Space v2 LEDs
[ARM] Kirkwood: update LED support for Network Space v2

Steve Sakoman (1):
omap: Overo: Fix support for second ethernet port

Sukumar Ghorai (8):
omap3 gpmc: functionality enhancement
omap3 nand: cleanup virtual address usages
omap3 nand: fix issue in board file to detect nand
omap3 flash: rename board-sdp-flash.c to be use by other boards
omap3: add support for NAND on zoom2 board
omap3: add support for NAND on zoom3 board
omap-3630-sdp : Add support for Flash
omap3: add support for NAND on LDP board

Thomas Weber (10):
OMAP2: Devkit8000: Cleanup for power supplies
OMAP2: Devkit8000: change panel to generic panel
OMAP2: Devkit8000: Remove unneeded VDVI supply
OMAP2: Devkit8000: Remove non existing vsim supply
OMAP2: Devkit8000: Remove en-/disable for tv panel
OMAP2: Devkit8000: Using the REGULATOR_SUPPLY macro
OMAP2: Devkit8000: Using gpio_is_valid macro
OMAP2: Devkit8000: Remove unused omap_board_config
OMAP2: Devkit8000: Fix regulator for power supply
OMAP2: powerdomain: Add break in switch statement

Tim Gardner (5):
UBUNTU: [Config] Find ABI files according to their source package name
UBUNTU: [Config] getabi: Only get armel omap and vexpress
UBUNTU: Bump ABI
UBUNTU: [Config] Changed flavour names from {omap,vexpress} to
linaro-{omap,vexpress}
UBUNTU: Linaro-2.6.35-1002.6

Tony Lindgren (36):
Merge branch 'v2.6.35-rc3-iommu-for-next' of
git://gitorious.org/~doyu/lk/mainline into omap-for-linus
omap: Separate out omap2 FS USB platform init functions
omap: Move omap2 FS USB platform init code into mach-omap2/usb-fs.c
omap: Enable interface clock for omap2 FS USB
omap: Move omap1 USB platform init code into mach-omap1/usb.c
omap: mux: Fix omap_mux_init_gpio for omap24xx
omap: mux: Renumber package defines to make room for older 24xx packages
omap: mux: Allow compiling in new mux code on all mach-omap2 systems
omap: mux: Remove unncessary parens from mux34xx.c
omap: mux: Add data for 2420
omap: mux: Add data for 2430
omap: mux: Select SIP package for H4
omap: mux: Select POP package for Apollon
omap: mux: Select POP package for N8X0
omap: mux: Select POP package for 2430SDP
omap: mux: Make omap2 FS USB code use new mux functions
omap: mux: Do keypad muxing in board-*.c files
omap: mux: Mux Apollon LCD power in board-apollon.c
omap: mux: Mux 2430 USB0HS_STP in board-2430.c
omap: mux: Convert 2420 platform init code to use new mux code
omap: mux: Remove old mux code
ARM: Disable VGA console for ARM in most cases
omap: Use 32KiHZ timer by default
omap: Make omap specific features appear under Kconfig menu
omap2/3/4: Move Kconfig options to mach-omap2/Kconfig
omap2/3/4: Select all omaps and boards by default
omap2/3/4: Add Kconfig option to compile in typical omap features
ARM: 6203/1: Make VFPv3 usable on ARMv6
ARM: 6207/1: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check
for it on V6
omap: Add back UART MDR1 check into uncompress.h
omap2: Fix GPIO numbers and smc91x for 2430sdp
Merge branch 'devel-misc' into omap-for-linus
Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into
omap-for-linus
Merge branch 'devel-map-io' into omap-for-linus
Merge branch 'v2.6.35-omap-mailbox-for-next' of
git://gitorious.org/~doyu/lk/mainline into omap-for-linus
arm: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6

Uwe Kleine-König (69):
ARM: mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its
arch number
ARM: mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its
arch number
ARM: zImage: don't hard code the stack size twice
ARM: zImage: some comments for __armv3_mpu_cache_on
ARM: zImage: __armv3_mpu_cache_flush: respect should-be-zero specification
ARM: zImage: fix comments for cache_on, cache_off and cache_clean_flush
ARM: zImage: annotate debug functions about corrupted registers
ARM: mx1: don't use deprecated symbol names
ARM: mx1/scb9328: fix type of uart1_mxc_exit to make compiler happy
ARM: mx2/mx27_3ds: document alternative names and remove empty header
ARM: imx: remove empty and unused board headers
ARM: mx3/kzm_arm11_01: fold board header in its only user
ARM: mx2/mx21ads: fold board header in its only user
ARM: mx2/mx27ads: fold board header in its only user
ARM: mx3/qong: get rid of nearly empty header
ARM: mx3/mx31_3ds: fold board header in its only user
ARM: mx3/mx31ads: fold board header in its only user
ARM: mxc: grammar fix
ARM: imx: rename mach dir for mx21 and mx27 to mach-imx
ARM: imx/mx1: fold crm_regs.h into its only consumer
ARM: imx: get rid of mxc_gpio_init
ARM: imx: fold serial.c into devices.c
ARM: imx1: rename imx_csi_device to match its .name
ARM: imx1: rename imx_i2c_device to follow a common naming scheme
ARM: imx1: rename imx_uart[12]_device to follow a common naming scheme
ARM: imx: rename mxc_uart_devicex to follow a common naming scheme
ARM: imx: move mx1 support to mach-imx
ARM: imx: Kconfig: use an if block instead of a depend for many symbols
ARM: imx: prepare deprecating ARCH_MX1, MACH_MX2, MACH_MX21 and MACH_MX27
ARM: imx: new Kconfig symbol and feature test macro for DMA on mx1 and mx2
ARM: imx: new helper function imx_add_platform_device
MTD: mxc_nand: make bit fields unsigned to please sparse
ARM: imx: remove paragraphs with old address of the FSF
ARM: mx25: remove paragraphs with old address of the FSF
ARM: mx3: remove paragraphs with old address of the FSF
ARM: mxc91231: remove paragraphs with old address of the FSF
ARM: mxc: remove paragraphs with old address of the FSF
ARM: imx: Change the way nand devices are registered (generic part)
ARM: imx: Change the way nand devices are registered (imx21)
ARM: imx: Change the way nand devices are registered (imx25)
ARM: imx: Change the way nand devices are registered (imx27)
ARM: imx: Change the way nand devices are registered (imx31)
ARM: imx: Change the way nand devices are registered (imx35)
ARM: imx: dynamically register imx-i2c devices (generic part)
ARM: imx: dynamically register imx-i2c devices (imx1)
ARM: imx: dynamically register imx-i2c devices (imx21)
ARM: imx: dynamically register imx-i2c devices (imx25)
ARM: imx: dynamically register imx-i2c devices (imx27)
ARM: imx: dynamically register imx-i2c devices (imx31)
ARM: imx: dynamically register imx-i2c devices (imx35)
ARM: imx: dynamically register spi_imx devices (generic part)
ARM: imx: dynamically register spi_imx devices (imx21)
ARM: imx: dynamically register spi_imx devices (imx25)
ARM: imx: dynamically register spi_imx devices (imx27)
ARM: imx: dynamically register spi_imx devices (imx31)
ARM: imx: dynamically register spi_imx devices (imx35)
ARM: imx: dynamically register imx-uart devices (generic part)
ARM: imx: dynamically register imx-uart devices (imx1)
ARM: imx: dynamically register imx-uart devices (imx21)
ARM: imx: dynamically register imx-uart devices (imx25)
ARM: imx: dynamically register imx-uart devices (imx27)
ARM: imx: dynamically register imx-uart devices (imx31)
ARM: imx: dynamically register imx-uart devices (imx35)
ARM: mx3: complement uart init routine with an exit routine
ARM: remove bit-rotten STANDALONE_DEBUG for decompressor
ARM: zImage: don't define unused symbol initrd_phys
ARM: deprecate support for old way to pass kernel parameters
Merge branch 'imx/for-2.6.36' of
git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD
mmc: build fix: mmc_pm_notify is only available with CONFIG_PM=y

Vincent Sanders (1):
Remove ARM default configurations which duplicate omap3_defconfig

Will Deacon (18):
ARM: 6218/1: Versatile Express: add support for local timers on
CA9X4 daughterboard
ARM: 6198/1: perf probe: Add ARM DWARF register number mappings
ARM: 6199/1: Add kprobe-based event tracer
ARM: 6213/1: atomic64_test: add ARM as supported architecture
Versatile Express: add support for local timers on CA9X4 daughterboard
ARM: Add kprobe-based event tracer
ARM: perf probe: Add ARM DWARF register number mappings
ARM: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a
faulty ASID
ARM: flush_ptrace_access: invalidate all I-caches
ARM: atomic64_test: add ARM as supported architecture
Merge branches 'atomic-fixes', 'misc-patches', 'perf-probe' and
'sw-breakpoint' into for-linaro
Merge branch 'perf-tools' into for-linaro
ARM: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a
faulty ASID
ARM: flush_ptrace_access: invalidate all I-caches
oprofile: don't call arch exit code from init code on failure
ARM: oprofile: fix and simplify init/exit functions
ARM: perf: reword comments relating to perf_event_do_pending
ARM: perf: fix event validation

Wolfram Sang (1):
pcm037/pcm043/pca100: fix ULPI-related build warnings

eric miao (2):
ARM: 6197/2: preliminary support for sparse IRQ
ARM: 6251/1: Make SPARSE_IRQ a hidden option

stanley.miao (1):
OMAP3: AM3505/3517 do not have IO wakeup capability

wanzongshun (5):
ARM: 6231/1: re-organize the nuc900 lcd arch platform data setting
ARM: 6232/1: add nuc900 keypad arch platform data
ARM: 6249/1: add nuc900 kpi platform_device structure to nuc910_dev
ARM: 6250/1: patch for modifying spi flash configuration
ARM: 6274/1: add global control registers definition header file
for nuc900

Documentation/arm/00-INDEX | 2 +
Documentation/arm/memory.txt | 8 +-
Documentation/arm/swp_emulation | 27 +
Documentation/arm/tcm.txt | 30 +-
arch/arm/Kconfig | 193 +-
arch/arm/Makefile | 16 +-
arch/arm/boot/Makefile | 8 +-
arch/arm/boot/compressed/Makefile | 15 +-
arch/arm/boot/compressed/Makefile.debug | 23 -
arch/arm/boot/compressed/head-l7200.S | 29 -
arch/arm/boot/compressed/head.S | 41 +-
arch/arm/boot/compressed/misc.c | 20 -
arch/arm/common/gic.c | 46 +
arch/arm/common/sa1111.c | 5 +-
arch/arm/configs/am3517_evm_defconfig | 127 -
arch/arm/configs/cm_t35_defconfig | 157 -
arch/arm/configs/devkit8000_defconfig | 184 -
arch/arm/configs/igep0020_defconfig | 179 -
arch/arm/configs/kirkwood_defconfig | 8 +
arch/arm/configs/lusl7200_defconfig | 23 -
arch/arm/configs/omap3_beagle_defconfig | 134 -
arch/arm/configs/omap3_evm_defconfig | 160 -
arch/arm/configs/omap3_pandora_defconfig | 158 -
arch/arm/configs/omap3_stalker_lks_defconfig | 150 -
arch/arm/configs/omap3_touchbook_defconfig | 621 --
arch/arm/configs/omap_2430sdp_defconfig | 136 -
arch/arm/configs/omap_3430sdp_defconfig | 178 -
arch/arm/configs/omap_3630sdp_defconfig | 154 -
arch/arm/configs/omap_apollon_2420_defconfig | 92 -
arch/arm/configs/omap_h4_2420_defconfig | 107 -
arch/arm/configs/omap_ldp_defconfig | 135 -
arch/arm/configs/omap_zoom2_defconfig | 143 -
arch/arm/configs/omap_zoom3_defconfig | 155 -
arch/arm/configs/overo_defconfig | 275 -
arch/arm/configs/rx51_defconfig | 222 -
arch/arm/include/asm/assembler.h | 13 +-
arch/arm/include/asm/cacheflush.h | 9 +-
arch/arm/include/asm/domain.h | 31 +-
arch/arm/include/asm/elf.h | 3 +
arch/arm/include/asm/futex.h | 9 +-
arch/arm/include/asm/hwcap.h | 1 +
arch/arm/include/asm/irq.h | 2 +
arch/arm/include/asm/kexec.h | 22 +-
arch/arm/include/asm/mach/arch.h | 2 +
arch/arm/include/asm/mach/irq.h | 1 +
arch/arm/include/asm/mach/map.h | 2 +
arch/arm/include/asm/mach/pci.h | 1 +
arch/arm/include/asm/memblock.h | 16 +
arch/arm/include/asm/memory.h | 76 +-
arch/arm/include/asm/mmzone.h | 30 -
arch/arm/include/asm/perf_event.h | 2 +-
arch/arm/include/asm/pgtable.h | 29 +-
arch/arm/include/asm/ptrace.h | 36 +
arch/arm/include/asm/setup.h | 8 +-
arch/arm/include/asm/smp_plat.h | 4 +
arch/arm/include/asm/system.h | 2 +-
arch/arm/include/asm/tlbflush.h | 12 +-
arch/arm/include/asm/tls.h | 46 +
arch/arm/include/asm/traps.h | 2 +
arch/arm/include/asm/uaccess.h | 16 +-
arch/arm/include/asm/unistd.h | 1 +
arch/arm/include/asm/vfpmacros.h | 18 +
arch/arm/kernel/Makefile | 6 +-
arch/arm/kernel/calls.S | 1 +
arch/arm/kernel/compat.c | 7 -
arch/arm/kernel/compat.h | 2 -
arch/arm/kernel/crash_dump.c | 60 +
arch/arm/kernel/entry-armv.S | 29 +-
arch/arm/kernel/entry-common.S | 124 +-
arch/arm/kernel/fiq.c | 5 +
arch/arm/kernel/irq.c | 41 +-
arch/arm/kernel/machine_kexec.c | 14 +-
arch/arm/kernel/module.c | 34 +
arch/arm/kernel/perf_event.c | 12 +-
arch/arm/kernel/process.c | 29 +-
arch/arm/kernel/ptrace.c | 96 +
arch/arm/kernel/relocate_kernel.S | 6 +
arch/arm/kernel/setup.c | 113 +-
arch/arm/kernel/smp.c | 17 +-
arch/arm/kernel/smp_twd.c | 3 +-
arch/arm/kernel/swp_emulate.c | 260 +
arch/arm/kernel/tcm.c | 118 +-
arch/arm/kernel/traps.c | 55 +-
arch/arm/lib/Makefile | 1 -
arch/arm/lib/getuser.S | 13 +-
arch/arm/lib/putuser.S | 29 +-
arch/arm/lib/uaccess.S | 83 +-
arch/arm/mach-aaec2000/include/mach/memory.h | 10 -
arch/arm/mach-at91/Kconfig | 11 +
arch/arm/mach-at91/Makefile | 3 +
arch/arm/mach-at91/at91sam9g45.c | 11 +
arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 45 +
arch/arm/mach-at91/board-sam9g20ek.c | 45 +
arch/arm/mach-at91/board-snapper9260.c | 189 +
arch/arm/mach-at91/include/mach/at91cap9.h | 2 +-
arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h | 22 +-
arch/arm/mach-at91/include/mach/at91sam9260.h | 2 +-
arch/arm/mach-at91/include/mach/at91sam9261.h | 2 +-
arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 130 +
arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 23 +-
arch/arm/mach-at91/include/mach/at91sam9rl.h | 2 +-
arch/arm/mach-at91/include/mach/board.h | 2 +
arch/arm/mach-at91/include/mach/cpu.h | 10 +
arch/arm/mach-at91/include/mach/gpio.h | 1 +
arch/arm/mach-at91/pm.h | 49 +-
arch/arm/mach-at91/pm_slowclock.S | 74 +-
arch/arm/mach-bcmring/core.c | 23 +-
arch/arm/mach-clps711x/Kconfig | 1 -
arch/arm/mach-clps711x/clep7312.c | 1 -
arch/arm/mach-clps711x/edb7211-arch.c | 10 +-
arch/arm/mach-clps711x/fortunet.c | 1 -
arch/arm/mach-clps711x/include/mach/memory.h | 2 -
arch/arm/mach-cns3xxx/Makefile | 3 +-
arch/arm/mach-cns3xxx/cns3420vb.c | 4 +
arch/arm/mach-cns3xxx/devices.c | 111 +
arch/arm/mach-cns3xxx/devices.h | 20 +
arch/arm/mach-cns3xxx/include/mach/cns3xxx.h | 91 +-
arch/arm/mach-cns3xxx/pcie.c | 389 +
arch/arm/mach-cns3xxx/pm.c | 31 +-
arch/arm/mach-davinci/include/mach/memory.h | 9 +-
arch/arm/mach-dove/common.c | 61 +
arch/arm/mach-dove/common.h | 2 +
arch/arm/mach-dove/dove-db-setup.c | 2 +
arch/arm/mach-ep93xx/adssphere.c | 24 +-
arch/arm/mach-ep93xx/clock.c | 2 +-
arch/arm/mach-ep93xx/core.c | 46 +-
arch/arm/mach-ep93xx/edb93xx.c | 31 +-
arch/arm/mach-ep93xx/gesbc9312.c | 24 +-
arch/arm/mach-ep93xx/include/mach/platform.h | 3 +
arch/arm/mach-ep93xx/micro9.c | 37 +-
arch/arm/mach-ep93xx/simone.c | 24 +-
arch/arm/mach-ep93xx/ts72xx.c | 27 +-
arch/arm/mach-imx/Kconfig | 193 +
arch/arm/{mach-mx2 => mach-imx}/Makefile | 18 +-
arch/arm/{mach-mx2 => mach-imx}/Makefile.boot | 4 +
.../{mach-mx1/clock.c => mach-imx/clock-imx1.c} | 50 +-
.../clock_imx21.c => mach-imx/clock-imx21.c} | 0
.../clock_imx27.c => mach-imx/clock-imx27.c} | 2 +-
.../{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} | 0
arch/arm/mach-imx/devices-imx1.h | 18 +
arch/arm/mach-imx/devices-imx21.h | 30 +
arch/arm/mach-imx/devices-imx27.h | 38 +
arch/arm/{mach-mx2 => mach-imx}/devices.c | 296 +-
arch/arm/{mach-mx2 => mach-imx}/devices.h | 32 +-
.../{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c} | 4 +-
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 392 +
arch/arm/mach-imx/include/mach/dma-mx1-mx2.h | 10 +
.../include/mach/dma-v1.h} | 10 +-
arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c | 122 +-
arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c | 11 +-
arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c | 34 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c | 58 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c | 40 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c | 76 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c | 36 +-
arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c | 114 +-
arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c | 33 +-
arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c | 21 +-
.../arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} | 23 +-
arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c | 5 +-
arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c | 5 +-
.../ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c} | 0
.../mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} | 0
arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c | 0
arch/arm/mach-imx/pm-imx27.c | 46 +
arch/arm/mach-integrator/common.h | 1 +
arch/arm/mach-integrator/core.c | 19 +-
arch/arm/mach-integrator/integrator_ap.c | 3 +
arch/arm/mach-integrator/integrator_cp.c | 3 +
arch/arm/mach-integrator/pci_v3.c | 8 +-
arch/arm/mach-iop13xx/include/mach/memory.h | 2 -
arch/arm/mach-iop13xx/pci.c | 2 +-
arch/arm/mach-ixp2000/pci.c | 2 +-
arch/arm/mach-ixp23xx/pci.c | 2 +-
arch/arm/mach-ixp4xx/common-pci.c | 7 +-
arch/arm/mach-ixp4xx/include/mach/memory.h | 6 +-
arch/arm/mach-kirkwood/Kconfig | 19 +
arch/arm/mach-kirkwood/Makefile | 2 +
arch/arm/mach-kirkwood/addr-map.c | 10 +-
arch/arm/mach-kirkwood/common.c | 38 +-
arch/arm/mach-kirkwood/common.h | 5 +-
arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 18 +-
arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 3 +-
arch/arm/mach-kirkwood/include/mach/irqs.h | 1 +
arch/arm/mach-kirkwood/include/mach/kirkwood.h | 39 +-
arch/arm/mach-kirkwood/include/mach/leds-ns2.h | 26 +
arch/arm/mach-kirkwood/mpp.c | 3 +-
arch/arm/mach-kirkwood/mpp.h | 596 +-
arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c | 2 +-
arch/arm/mach-kirkwood/netspace_v2-setup.c | 104 +-
arch/arm/mach-kirkwood/netxbig_v2-setup.c | 32 +-
arch/arm/mach-kirkwood/openrd-setup.c | 29 +-
arch/arm/mach-kirkwood/pcie.c | 174 +-
arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 2 +-
arch/arm/mach-kirkwood/rd88f6281-setup.c | 2 +-
arch/arm/mach-kirkwood/t5325-setup.c | 194 +
arch/arm/mach-kirkwood/ts219-setup.c | 11 +-
arch/arm/mach-kirkwood/ts41x-setup.c | 39 +-
arch/arm/mach-ks8695/pci.c | 4 +-
arch/arm/mach-l7200/Makefile | 11 -
arch/arm/mach-l7200/Makefile.boot | 2 -
arch/arm/mach-l7200/core.c | 100 -
arch/arm/mach-l7200/include/mach/aux_reg.h | 28 -
arch/arm/mach-l7200/include/mach/debug-macro.S | 40 -
arch/arm/mach-l7200/include/mach/entry-macro.S | 35 -
arch/arm/mach-l7200/include/mach/gp_timers.h | 42 -
arch/arm/mach-l7200/include/mach/gpio.h | 105 -
arch/arm/mach-l7200/include/mach/hardware.h | 57 -
arch/arm/mach-l7200/include/mach/io.h | 21 -
arch/arm/mach-l7200/include/mach/irqs.h | 56 -
arch/arm/mach-l7200/include/mach/memory.h | 26 -
arch/arm/mach-l7200/include/mach/pmpcon.h | 46 -
arch/arm/mach-l7200/include/mach/pmu.h | 125 -
arch/arm/mach-l7200/include/mach/serial.h | 37 -
arch/arm/mach-l7200/include/mach/serial_l7200.h | 101 -
arch/arm/mach-l7200/include/mach/sib.h | 119 -
arch/arm/mach-l7200/include/mach/sys-clock.h | 67 -
arch/arm/mach-l7200/include/mach/system.h | 29 -
arch/arm/mach-l7200/include/mach/time.h | 73 -
arch/arm/mach-l7200/include/mach/timex.h | 20 -
arch/arm/mach-l7200/include/mach/uncompress.h | 39 -
arch/arm/mach-l7200/include/mach/vmalloc.h | 4 -
arch/arm/mach-lh7a40x/include/mach/memory.h | 44 -
arch/arm/mach-lpc32xx/Kconfig | 33 +
arch/arm/mach-lpc32xx/Makefile | 8 +
arch/arm/mach-lpc32xx/Makefile.boot | 4 +
arch/arm/mach-lpc32xx/clock.c | 1137 +++
arch/arm/mach-lpc32xx/clock.h | 38 +
arch/arm/mach-lpc32xx/common.c | 271 +
arch/arm/mach-lpc32xx/common.h | 73 +
arch/arm/mach-lpc32xx/gpiolib.c | 446 ++
.../include/mach/clkdev.h} | 19 +-
.../include/mach/debug-macro.S} | 25 +-
arch/arm/mach-lpc32xx/include/mach/entry-macro.S | 47 +
arch/arm/mach-lpc32xx/include/mach/gpio.h | 74 +
arch/arm/mach-lpc32xx/include/mach/hardware.h | 34 +
arch/arm/mach-lpc32xx/include/mach/i2c.h | 63 +
.../include/mach/io.h} | 21 +-
arch/arm/mach-lpc32xx/include/mach/irqs.h | 117 +
.../include/mach/memory.h} | 21 +-
arch/arm/mach-lpc32xx/include/mach/platform.h | 694 ++
arch/arm/mach-lpc32xx/include/mach/system.h | 52 +
.../include/mach/timex.h} | 22 +-
arch/arm/mach-lpc32xx/include/mach/uncompress.h | 60 +
.../include/mach/vmalloc.h} | 18 +-
arch/arm/mach-lpc32xx/irq.c | 432 +
arch/arm/mach-lpc32xx/phy3250.c | 397 +
arch/arm/mach-lpc32xx/pm.c | 146 +
arch/arm/mach-lpc32xx/serial.c | 190 +
arch/arm/mach-lpc32xx/suspend.S | 151 +
arch/arm/mach-lpc32xx/timer.c | 182 +
arch/arm/mach-msm/Makefile | 2 +-
arch/arm/mach-msm/board-trout-gpio.c | 112 +
arch/arm/mach-msm/board-trout.c | 1 -
arch/arm/mach-msm/board-trout.h | 157 +
arch/arm/mach-msm/include/mach/gpio.h | 7 +
arch/arm/mach-mx1/Kconfig | 19 -
arch/arm/mach-mx1/Makefile | 15 -
arch/arm/mach-mx1/Makefile.boot | 4 -
arch/arm/mach-mx1/crm_regs.h | 55 -
arch/arm/mach-mx1/devices.c | 242 -
arch/arm/mach-mx1/devices.h | 7 -
arch/arm/mach-mx2/Kconfig | 116 -
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 249 -
arch/arm/mach-mx2/serial.c | 141 -
arch/arm/mach-mx25/Kconfig | 23 +
arch/arm/mach-mx25/Makefile | 4 +-
arch/arm/mach-mx25/clock.c | 70 +-
arch/arm/mach-mx25/devices-imx25.h | 43 +
arch/arm/mach-mx25/devices.c | 313 +-
arch/arm/mach-mx25/devices.h | 16 +-
arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c | 260 +
arch/arm/mach-mx25/mach-cpuimx25.c | 173 +
.../mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} | 58 +-
arch/arm/mach-mx25/mm.c | 7 +-
arch/arm/mach-mx3/Kconfig | 53 +
arch/arm/mach-mx3/Makefile | 4 +-
arch/arm/mach-mx3/clock-imx35.c | 6 +-
arch/arm/mach-mx3/devices-imx31.h | 38 +
arch/arm/mach-mx3/devices-imx35.h | 37 +
arch/arm/mach-mx3/devices.c | 247 +-
arch/arm/mach-mx3/devices.h | 13 -
arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c | 263 +
arch/arm/mach-mx3/mach-armadillo5x0.c | 17 +-
arch/arm/mach-mx3/mach-cpuimx35.c | 227 +
arch/arm/mach-mx3/mach-kzm_arm11_01.c | 31 +-
arch/arm/mach-mx3/mach-mx31_3ds.c | 256 +-
arch/arm/mach-mx3/mach-mx31ads.c | 55 +-
arch/arm/mach-mx3/mach-mx31lilly.c | 15 +-
arch/arm/mach-mx3/mach-mx31lite.c | 17 +-
arch/arm/mach-mx3/mach-mx31moboard.c | 50 +-
.../mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} | 16 +-
arch/arm/mach-mx3/mach-pcm037.c | 34 +-
arch/arm/mach-mx3/mach-pcm037_eet.c | 7 +-
arch/arm/mach-mx3/mach-pcm043.c | 31 +-
arch/arm/mach-mx3/mach-qong.c | 16 +-
arch/arm/mach-mx3/mm.c | 7 +-
arch/arm/mach-mx3/mx31lilly-db.c | 14 +-
arch/arm/mach-mx3/mx31lite-db.c | 15 +-
arch/arm/mach-mx3/mx31moboard-devboard.c | 10 +-
arch/arm/mach-mx3/mx31moboard-marxbot.c | 4 -
arch/arm/mach-mx3/mx31moboard-smartbot.c | 11 +-
arch/arm/mach-mx5/Kconfig | 27 +
arch/arm/mach-mx5/Makefile | 4 +-
arch/arm/mach-mx5/board-cpuimx51.c | 293 +
arch/arm/mach-mx5/board-mx51_3ds.c | 164 +
arch/arm/mach-mx5/board-mx51_babbage.c | 28 +-
arch/arm/mach-mx5/clock-mx51.c | 16 +
arch/arm/mach-mx5/devices.c | 83 +-
arch/arm/mach-mx5/devices.h | 4 +
arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 200 +
arch/arm/mach-mx5/mm.c | 3 +
arch/arm/mach-mxc91231/crm_regs.h | 5 -
arch/arm/mach-mxc91231/devices.c | 2 +-
arch/arm/mach-mxc91231/mm.c | 8 +-
arch/arm/mach-nomadik/clock.c | 4 +
arch/arm/mach-omap1/Kconfig | 13 +
arch/arm/mach-omap1/Makefile | 3 +
arch/arm/mach-omap1/board-ams-delta.c | 3 +-
arch/arm/mach-omap1/board-fsample.c | 13 +
arch/arm/mach-omap1/board-generic.c | 5 +-
arch/arm/mach-omap1/board-h2.c | 32 +-
arch/arm/mach-omap1/board-h3.c | 16 +-
arch/arm/mach-omap1/board-htcherald.c | 3 +-
arch/arm/mach-omap1/board-innovator.c | 5 +-
arch/arm/mach-omap1/board-nokia770.c | 137 +-
arch/arm/mach-omap1/board-osk.c | 3 +-
arch/arm/mach-omap1/board-palmte.c | 87 +-
arch/arm/mach-omap1/board-palmtt.c | 3 +-
arch/arm/mach-omap1/board-palmz71.c | 16 +-
arch/arm/mach-omap1/board-perseus2.c | 13 +
arch/arm/mach-omap1/board-sx1.c | 5 +-
arch/arm/mach-omap1/board-voiceblue.c | 3 +-
arch/arm/mach-omap1/clock.c | 22 +-
arch/arm/mach-omap1/clock.h | 2 +-
arch/arm/mach-omap1/clock_data.c | 149 +-
arch/arm/mach-omap1/devices.c | 72 -
arch/arm/mach-omap1/include/mach/debug-macro.S | 10 +-
arch/arm/mach-omap1/io.c | 2 -
arch/arm/mach-omap1/mailbox.c | 55 +-
arch/arm/mach-omap1/mcbsp.c | 3 -
arch/arm/mach-omap1/mux.c | 6 +-
arch/arm/mach-omap1/serial.c | 7 +
arch/arm/mach-omap1/usb.c | 530 ++
arch/arm/mach-omap2/Kconfig | 89 +
arch/arm/mach-omap2/Makefile | 23 +-
arch/arm/mach-omap2/board-2430sdp.c | 24 +-
arch/arm/mach-omap2/board-3430sdp.c | 25 +-
arch/arm/mach-omap2/board-3630sdp.c | 130 +-
arch/arm/mach-omap2/board-4430sdp.c | 71 +-
arch/arm/mach-omap2/board-am3517evm.c | 9 +-
arch/arm/mach-omap2/board-apollon.c | 31 +-
arch/arm/mach-omap2/board-cm-t35.c | 29 +-
arch/arm/mach-omap2/board-devkit8000.c | 170 +-
.../{board-sdp-flash.c => board-flash.c} | 93 +-
arch/arm/mach-omap2/board-generic.c | 2 +-
arch/arm/mach-omap2/board-h4.c | 61 +-
arch/arm/mach-omap2/board-igep0020.c | 9 +-
arch/arm/mach-omap2/board-ldp.c | 44 +-
arch/arm/mach-omap2/board-n8x0.c | 14 +
arch/arm/mach-omap2/board-omap3beagle.c | 17 +-
arch/arm/mach-omap2/board-omap3evm.c | 9 +-
arch/arm/mach-omap2/board-omap3pandora.c | 157 +-
arch/arm/mach-omap2/board-omap3stalker.c | 8 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 34 +-
arch/arm/mach-omap2/board-omap4panda.c | 304 +
arch/arm/mach-omap2/board-overo.c | 75 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 78 +-
arch/arm/mach-omap2/board-rx51-video.c | 1 -
arch/arm/mach-omap2/board-rx51.c | 3 +-
arch/arm/mach-omap2/board-zoom2.c | 65 +-
arch/arm/mach-omap2/board-zoom3.c | 65 +-
arch/arm/mach-omap2/clock3xxx_data.c | 7 +-
arch/arm/mach-omap2/cm.c | 6 +-
arch/arm/mach-omap2/devices.c | 88 +-
arch/arm/mach-omap2/gpmc-nand.c | 37 +-
arch/arm/mach-omap2/gpmc.c | 284 +-
arch/arm/mach-omap2/i2c.c | 27 +-
arch/arm/mach-omap2/id.c | 64 +-
.../include/mach/{board-sdp.h => board-flash.h} | 9 +-
arch/arm/mach-omap2/include/mach/board-zoom.h | 6 +
arch/arm/mach-omap2/include/mach/debug-macro.S | 29 +-
arch/arm/mach-omap2/include/mach/id.h | 22 +
arch/arm/mach-omap2/include/mach/omap4-common.h | 7 +
arch/arm/mach-omap2/io.c | 16 +-
arch/arm/mach-omap2/iommu2.c | 44 +-
arch/arm/mach-omap2/mailbox.c | 182 +-
arch/arm/mach-omap2/mcbsp.c | 13 +-
arch/arm/mach-omap2/mux.c | 338 +-
arch/arm/mach-omap2/mux.h | 28 +-
arch/arm/mach-omap2/mux2420.c | 688 ++
arch/arm/mach-omap2/mux2420.h | 282 +
arch/arm/mach-omap2/mux2430.c | 791 ++
arch/arm/mach-omap2/mux2430.h | 370 +
arch/arm/mach-omap2/mux34xx.c | 8 +-
arch/arm/mach-omap2/omap-headsmp.S | 16 -
arch/arm/mach-omap2/omap-hotplug.c | 79 +
arch/arm/mach-omap2/omap-iommu.c | 2 +-
arch/arm/mach-omap2/omap-smp.c | 3 +-
arch/arm/mach-omap2/omap44xx-smc.S | 25 +
arch/arm/mach-omap2/omap_hwmod.c | 106 +-
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 79 +-
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 81 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 92 +-
arch/arm/mach-omap2/omap_hwmod_common_data.c | 3 +
arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 +
arch/arm/mach-omap2/pm.c | 84 +
arch/arm/mach-omap2/pm24xx.c | 1 -
arch/arm/mach-omap2/pm34xx.c | 7 +-
arch/arm/mach-omap2/pm44xx.c | 135 +
arch/arm/mach-omap2/powerdomain.c | 1 +
arch/arm/mach-omap2/powerdomains34xx.h | 12 +-
arch/arm/mach-omap2/serial.c | 80 +-
arch/arm/mach-omap2/usb-ehci.c | 1 -
arch/arm/mach-omap2/usb-fs.c | 359 +
arch/arm/mach-omap2/usb-musb.c | 1 -
arch/arm/mach-omap2/usb-tusb6010.c | 14 +-
arch/arm/mach-orion5x/Kconfig | 1 +
arch/arm/mach-orion5x/dns323-setup.c | 370 +-
arch/arm/mach-orion5x/include/mach/system.h | 2 +
arch/arm/mach-pxa/cm-x2xx-pci.c | 4 +-
arch/arm/mach-pxa/corgi.c | 1 -
arch/arm/mach-pxa/eseries.c | 1 -
arch/arm/mach-pxa/generic.h | 3 +-
arch/arm/mach-pxa/include/mach/memory.h | 19 +-
arch/arm/mach-pxa/palmt5.c | 7 +
arch/arm/mach-pxa/palmtreo.c | 9 +
arch/arm/mach-pxa/poodle.c | 1 -
arch/arm/mach-pxa/spitz.c | 1 -
arch/arm/mach-pxa/tosa.c | 1 -
arch/arm/mach-realview/core.c | 40 +-
arch/arm/mach-realview/include/mach/board-pb1176.h | 1 +
arch/arm/mach-realview/include/mach/irqs-pb1176.h | 2 +-
arch/arm/mach-realview/include/mach/memory.h | 7 +-
arch/arm/mach-realview/realview_eb.c | 30 +-
arch/arm/mach-realview/realview_pb1176.c | 46 +-
arch/arm/mach-realview/realview_pb11mp.c | 9 +-
arch/arm/mach-realview/realview_pba8.c | 9 +-
arch/arm/mach-realview/realview_pbx.c | 9 +-
arch/arm/mach-s3c2410/mach-h1940.c | 9 +
arch/arm/mach-s3c2412/mach-smdk2413.c | 1 -
arch/arm/mach-s3c2412/mach-vstms.c | 1 -
arch/arm/mach-s3c2440/mach-rx1950.c | 9 +
arch/arm/mach-s3c2440/mach-rx3715.c | 9 +
arch/arm/mach-sa1100/generic.h | 3 +-
arch/arm/mach-sa1100/include/mach/memory.h | 6 +-
arch/arm/mach-shark/include/mach/memory.h | 7 +-
arch/arm/mach-shmobile/Kconfig | 12 +
arch/arm/mach-shmobile/include/mach/irqs.h | 1 -
arch/arm/mach-spear3xx/clock.c | 3 +
arch/arm/mach-spear6xx/clock.c | 3 +
arch/arm/mach-u300/clock.c | 6 +
arch/arm/mach-u300/include/mach/memory.h | 8 -
arch/arm/mach-u300/u300.c | 17 +
arch/arm/mach-ux500/board-mop500.c | 36 +-
arch/arm/mach-ux500/clock.c | 4 +
arch/arm/mach-ux500/devices-db8500.c | 14 +-
.../mach-ux500/include/mach/irqs-board-mop500.h | 23 +
arch/arm/mach-ux500/include/mach/irqs-db5500.h | 85 +
arch/arm/mach-ux500/include/mach/irqs-db8500.h | 96 +
arch/arm/mach-ux500/include/mach/irqs.h | 22 +-
arch/arm/mach-ux500/pins-db8500.h | 742 ++
arch/arm/mach-versatile/core.c | 35 +-
arch/arm/mach-versatile/pci.c | 2 +-
arch/arm/mach-vexpress/ct-ca9x4.c | 4 +-
arch/arm/mach-vexpress/include/mach/ct-ca9x4.h | 1 +
arch/arm/mach-vexpress/v2m.c | 7 +-
arch/arm/mach-w90x900/dev.c | 96 +-
arch/arm/mach-w90x900/include/mach/regs-gcr.h | 39 +
arch/arm/mach-w90x900/mach-nuc950evb.c | 44 -
arch/arm/mach-w90x900/nuc910.c | 2 +
arch/arm/mach-w90x900/nuc950.c | 2 -
arch/arm/mm/Kconfig | 56 +-
arch/arm/mm/Makefile | 1 -
arch/arm/mm/alignment.c | 16 +-
arch/arm/mm/cache-l2x0.c | 15 +-
arch/arm/mm/copypage-v4mc.c | 2 +-
arch/arm/mm/copypage-v6.c | 2 +-
arch/arm/mm/copypage-xscale.c | 2 +-
arch/arm/mm/discontig.c | 45 -
arch/arm/mm/dma-mapping.c | 21 +-
arch/arm/mm/fault-armv.c | 8 +-
arch/arm/mm/fault.c | 56 +-
arch/arm/mm/flush.c | 50 +-
arch/arm/mm/init.c | 424 +-
arch/arm/mm/ioremap.c | 80 +-
arch/arm/mm/mm.h | 4 +-
arch/arm/mm/mmu.c | 192 +-
arch/arm/mm/nommu.c | 22 +-
arch/arm/mm/proc-arm1020.S | 6 +-
arch/arm/mm/proc-arm1020e.S | 6 +-
arch/arm/mm/proc-arm1022.S | 6 +-
arch/arm/mm/proc-arm1026.S | 6 +-
arch/arm/mm/proc-arm6_7.S | 2 -
arch/arm/mm/proc-arm720.S | 6 +-
arch/arm/mm/proc-arm740.S | 6 +-
arch/arm/mm/proc-arm7tdmi.S | 2 -
arch/arm/mm/proc-arm920.S | 10 +-
arch/arm/mm/proc-arm922.S | 10 +-
arch/arm/mm/proc-arm925.S | 6 +-
arch/arm/mm/proc-arm926.S | 6 +-
arch/arm/mm/proc-arm940.S | 6 +-
arch/arm/mm/proc-arm946.S | 6 +-
arch/arm/mm/proc-arm9tdmi.S | 2 -
arch/arm/mm/proc-fa526.S | 6 +-
arch/arm/mm/proc-feroceon.S | 7 +-
arch/arm/mm/proc-macros.S | 7 +
arch/arm/mm/proc-mohawk.S | 6 +-
arch/arm/mm/proc-sa110.S | 8 +-
arch/arm/mm/proc-sa1100.S | 6 +-
arch/arm/mm/proc-v6.S | 10 +-
arch/arm/mm/proc-v7.S | 16 +-
arch/arm/mm/proc-xsc3.S
 
Old 09-09-2010, 04:03 AM
Tim Gardner
 
Default linux-linaro pull request

On 09/08/2010 04:22 PM, John Rigby wrote:
> Tim,
>
> These changes only appear huge because I am rebasing against a rebased Ubuntu,
> so all the linux-linaro-2.6.35 changes show up as new.
>
> The following changes since commit 7825dff500c8bc787190037cc40c84178f7576f8:
> Leann Ogasawara (1):
> UBUNTU: Ubuntu-2.6.35-20.29
>
> are available in the git repository at:
>
> git://git.linaro.org/ubuntu/linux-linaro.git linaro
>
>
> Amit Kucheria (2):
> arm: mxc: utilise usecount field in clock operations
> mxc: Fix pad names for imx51
>
> Anand Gadiyar (3):
> OMAP3: wait on IDLEST after enabling USBTLL fclk
> OMAP3630: Add ES1.1 and ES1.2 detection
> omap: 3630: disable TLL SAR on 3630 ES1
>
> Anton Vorontsov (4):
> ARM: cns3xxx: Use IO memory accessors everywhere
> ARM: cns3xxx: Add support for PCI Express ports
> ARM: cns3xxx: Add support for SDHCI controllers
> ARM: cns3xxx: Add support for AHCI controllers
>
> Arnaud Patard (1):
> [ARM] qnap tsx1x: fix section mismatch
>
> Artem Bityutskiy (1):
> omap: device: improve errors handling
>
> Baruch Siach (13):
> mxc_nand: add support for platform defined partitions
> mx25: add platform code for imx-keypad
> mx25pdk: add keypad support
> mx25: add watchdog clock
> mx25pdk: register watchdog device
> mx25: add a comment documenting undocumented IPG clocks
> mx27: add support for the CSI device
> mx25: add support for the CSI device
> mx25: add iomux defines for UART4 on KPP pins
> mx25: add PWM4 to iomux
> arm/imx/gpio: add spinlock protection
> mx2_camera: Add soc_camera support for i.MX25/i.MX27
> mx2_camera: fix type of dma buffer virtual address pointer
>
> Benjamin Herrenschmidt (3):
> net/phy/marvell: Expose IDs and flags in a .h and add dns323
> LEDs setup flag
> [ARM] orion5x: Base support for DNS-323 rev C1
> [ARM] orion5x: Fix soft-reset for some platforms
>
> Benjamin Zores (1):
> [ARM] Kirkwood: update MPP definition.
>
> Benoit Cousson (1):
> OMAP2&3: hwmod: Remove _hwmod prefix in name string
>
> Catalin Marinas (18):
> ARM: Correct the cpu_architecture() function for ARMv7
> smsc911x: Add spinlocks around registers access
> kmemleak: Show more information for objects found by alias
> kmemleak: Add DocBook style comments to kmemleak.c
> kbuild: Warn on selecting symbols with unmet direct dependencies
> ARM: Mark CPU_32v6K as depended on CPU_V7
> ARM: Add support for the MOVW/MOVT relocations in Thumb-2
> ARM: Remove dummy loads from the original relocation address
> ARM: Do not compile the Thumb-2 module relocations on an ARM kernel
> ARM: Allow lazy cache flushing via PG_arch_1 for highmem pages
> ARM: Assume new page cache pages have dirty D-cache
> ARM: Introduce __sync_icache_dcache() for VIPT caches
> ARM: Use lazy cache flushing on ARMv7 SMP systems
> ARM: Remove superfluous flush_kernel_dcache_page()
> ARM: Implement phys_mem_access_prot() to avoid attributes aliasing
> ARM: Improve the L2 cache performance when PL310 is used
> ARM: Remove the domain switching on ARMv6k/v7 CPUs
> ARM: VExpress: Set bit 22 in the PL310 (cache controller) AuxCtlr register
>
> Chris Wilson (1):
> lib/scatterlist: Hook sg_kmalloc into kmemleak (v2)
>
> Christoph Egger (8):
> Replace dead OMAP_MUX_ERRORS with OMAP_MUX_WARNINGS
> Removing dead OMAP_IR
> Removing dead OMAP_DSP
> Removing dead OMAP_STI
> Replacing LEDS_OMAP_DEBUG with OMAP_DEBUG_LEDS
> Removing dead APM
> Removing dead MACH_OMAP_H4_OTG
> Removing dead MACH_OMAP2_H4_USB1
>
> Cory Maccarrone (1):
> omap1: omap7xx clocks, mux, serial fixes
>
> Daniel Mack (2):
> ARM: mx3: pcm037: remove unused variable
> ARM: mx3: mx31lilly: pass mc13783 SPI IRQ pin
>
> Dave Martin (9):
> perf report: Don't abbreviate file paths relative to the cwd
> perf tools: Remove unneeded code for tracking the cwd in perf sessions
> perf tools: Factor out buildid reading and make it implicit in dso__load
> perf tools: remove extra build-id check factored into dso__load
> perf symbols: Improve debug image search when loading symbols
> perf events: Fix mmap offset determination
> perf symbols: work around incorrect ET_EXEC symbol adjustment
> perf symbols: Ignore mapping symbols on ARM
> perf symbols: fix symbol offset breakage with separated debug
>
> David Anders (1):
> omap4: Add OMAP4 Panda Support
>
> Deepak K (1):
> omap2/3/4: serial: errata i202: fix for MDR1 access
>
> Dinh Nguyen (2):
> mx5: Add i2c to Freescale MX51 Babbage HW
> mx5: Register i2c on Freescale MX51 Babbage HW
>
> Dmitry Eremin-Solenikov (2):
> ARM: 6162/1: at91sam9g20ek: add fixed-value regulator for wm8731
> ARM: 6163/1: at91sam9g20ek: add fixed-value regulator for wm8731
>
> Dmytro Milinevskyy (1):
> [ARM] Marvell OpenRD-Ultimate machine support
>
> Eric Bénard (35):
> eukrea_mbimx27-baseboard: fix typo in display name
> eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controls
> eukrea_mbimx27-baseboard: add timings for DVI output
> cpuimx27 and mbimx27: allow fine control of UART4 and SDHC2 usage
> mach-cpuimx27: fix QuadUART's IRQ typo in pins'setup
> eukrea_mbimx27: fix ADS7846 support
> mach-cpuimx27: add USB Host2 and OTG support
> mach-cpuimx27: register wdt and w1_master resources
> mxcmmc: add card detect through DAT3 possibility
> eukrea_mbimx27: use card detect through DAT3 for SDHC1
> MX2X: Add Keypad device definition for MX2X arch
> eukrea_mbimx27: add support for the keyboard
> eukrea_mbimx27: add audio codec
> i.MX35: return IPU clock's value for mx3fb
> mach-cpuimx27: fix USB_ULPI build warnings
> eukrea_mbimx27: fix audio support when SOC is compiled as module
> i.MX27: add suspend to RAM support
> MX25: put define for OTG base address in right include
> plat-mxc/ehci.c: add i.MX25 support
> i.MX25: fix get_rate_otg to return the correct value
> i.MX25: fix EHCI support
> i.MX25: fix USB gadget support
> i.MX25: add AUDMUX and SSI support
> i.MX25: add cpuimx25 module and its baseboard
> i.MX35: add cpuimx35 support and its baseboard
> mxcmmc: convert to pm_ops and enable/disable clock
> imx25: fix low level debug
> imxfb: add pwmr controlled backlight support
> eukrea_mbimx27-baseboard: fix compile when CONFIG_SPI_IMX is disabled
> i.MX51: handle IRQ for gpio 16..31
> iomux-mx51: add 4 pin definitions
> mbimxsd baseboards : remove unnecessary include
> Fix KConfig warning
> eukrea-baseboards: merge includes in one file
> i.MX51: add support for cpuimx51 module and its baseboard
>
> Eric Miao (2):
> ARM: Remove unused PARAMS_PHYS from arch/arm/boot/compressed
> ARM: Auto calculate ZRELADDR and provide option for exceptions
>
> Fabio Estevam (1):
> mx31_3ds: Handle USB OTG GPIO Errors
>
> Felipe Contreras (13):
> omap: mailbox: trivial cleanups
> omap: mailbox: reorganize structures
> omap: mailbox: 2420 should be detected at run-time
> omap: mailbox: use correct config for omap1
> omap: mailbox: update omap1 probing
> omap: mailbox: don't export unecessary symbols
> omap: mailbox: remove unecessary fields
> omap: mailbox: add IRQ names
> omap: mailbox: reorganize registering
> omap: mailbox: simplify omap_mbox_register()
> omap: mailbox: only compile for configured archs
> omap: mailbox: standarize on 'omap-mailbox'
> omap: mailbox: reorganize headers
>
> Fernando Guzman Lugo (4):
> Mailbox: free mailbox interrupt before freeing blk queue
> Mailbox: flush pending deferred works before freeing blk queue
> Mailbox: Check valid registered callback before calling
> Mailbox: disable mailbox interrupt when request queue
>
> Govindraj R (1):
> omap3: serial: Add context save and restore for mcr
>
> Grazvydas Ignotas (3):
> omap3: pandora: update gpio-keys data
> omap3: pandora: add NAND and wifi support
> omap: mux: fix multipath gpio handling
>
> Harro Haan (1):
> ARM: 5967/1: at91_udc.c use spinlocks instead of local_irq_xxx
>
> Hartley Sweeten (3):
> ARM: 6167/1: ep93xx: register backlight driver
> ARM: 6168/1: ep93xx: move physmap flash registration into core.c
> ARM: 6174/1: ep93xx: clear devcfg bits before setting them
>
> Helge Deller (1):
> PARISC: led.c - fix potential stack overflow in led_proc_write()
>
> Hemanth V (1):
> OMAP4: Add GPIO LED support for SDP board
>
> Hiroshi DOYU (6):
> omap iommu: Introduce iopgd_is_table MACRO
> omap iommu: Rename iopte_[p,v]addr -> iopte_page_[p,v]addr
> omap iommu: move iommu_disable at fault to the above layer
> omap iommu: Make omap-iommu.o built-in
> Mailbox: new mutext lock for h/w mailbox configuration
> omap mailbox: Set a device in logical mbox instance for traceability
>
> Jarkko Nikula (4):
> omap: rx51: Set regulator V28 always on
> omap: rx51: Add platform_data for tlv320aic3x with reset gpionumber
> omap: rx51: Use REGULATOR_SUPPLY macro when
> initializingregulator consumers
> omap: rx51: Add supply and data for the tpa6130a2 headphoneamplifier
>
> Jason Baron (1):
> kmemleak: Introduce a default off mode for kmemleak
>
> Jason Wang (10):
> mx51/iomux: Fix mux mode and input path for two pads
> mx51/iomux: add UART and GPIO pad definitions for imx51_3ds board
> mxc/iomux: add GPIO bank offset for iomux v3 platforms
> mxc: add common debug board for 3-stack platforms
> mx31_3ds: revert 3ds debug board relate code
> mx51_3ds: Add support for the imx51 3-stack board
> mx51: add imx_keypad device definition for mx51 platforms
> mx51_3ds: add keypad support on 3ds platform
> imx: move gpio init after to irq init
> omap: Fix DEBUG_LL uart to access phys addr when MMU isn't enable
>
> John Rigby (26):
> omap3 nand: fix missing gpmc_prefetch_reset param
> Merge branch 'linux-linaro-2.6.35-8Sep2010' and Ubuntu-2.6.35-20.29
> LINARO: Add debian.linaro packaging
> LINARO: select debian.linaro packaging
> LINARO: [Config] Update configs for new upstream
> LINARO: Start new release
> LINARO: Linaro-2.6.35-1001-5
> LINARO: [Config] Fix vexpress config
> LINARO: [Config] Add mx51 flavour
> LINARO: Start new release
> LINARO: [config] Update vexpress config
> LINARO: Linaro-2.6.35-1003.7
> LINARO: Start new release
> LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-19.25 merge
> LINARO: [Config] Update configs
> LINARO: Bump ABI
> LINARO: Linaro-2.6.35-1004.8
> LINARO: Start new release
> LINARO: Linaro-2.6.35-1004.9
> LINARO: Start new release
> LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-20.29 merge
> LINARO: [Config] Turn on CONFIG_HIGHMEM for vexpress
> LINARO: Update Vcs-Git
> LINARO: add Recommends uboot-mkimage
> LINARO: Bump ABI
> LINARO: Linaro-2.6.35.1005.10
>
> Kan-Ru Chen (5):
> OMAP2: Devkit8000: Enable DVI-D output
> OMAP2: Devkit8000: Setup LCD reset
> omap: Add new interface omap_get_die_id
> omap: Use omap_get_die_id() to get the DIE ids
> omap: Devkit8000: Use DIE id to initialize dm9000 MAC address
>
> Kanigeri, Hari (3):
> omap iommu: update irq mask to be specific about twl and tlb
> omap iommu: add functionality to get TLB miss interrupt
> omap iommu: update ducati mmu irq define name
>
> Kevin Hilman (8):
> OMAP24xx: CM: fix mask used for checking IDLEST status
> OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST
> OMAP: hwmod: add non-locking versions of enable and idle functions
> OMAP: omap_device: ensure hwmod tracks attached omap_device pointer
> OMAP: PM: create omap_devices for MPU, DSP, L3
> OMAP: hwmod data: add class for IVA hwmods
> OMAP2&3: hwmod: Replace l3 -> l3_main
> OMAP3: hwmod data: add data for OMAP3 IVA2
>
> Kevin Wells (11):
> ARM: LPC32XX: Initial arch header files
> ARM: LPC32XX: Debug and IRQ macros
> ARM: LPC32XX: Clock driver
> ARM: LPC32XX: GPIO, timer, and IRQ drivers
> ARM: LPC32XX: System suspend support
> ARM: LPC32XX: Serial support code
> ARM: LPC32XX: Misc support functions
> ARM: LPC32XX: Phytec 3250 platform support
> ARM: LPC32XX: Arch config menu supoport and makefiles
> ARM: Add support for the LPC32XX arch
> Merge branch 'test' of ../test/linux-2.6-lpc2 into wells/lpc32xx-arch_v2
>
> Kirill A. Shutemov (5):
> ARM: 6252/1: Use SIGBUS for unaligned access instead of SIGILL
> ARM: 6269/1: Add 'code' parameter for hook_fault_code()
> ARM: 6255/1: Workaround infinity loop in handling of translation faults
> ARM: 6256/1: Check arch version and modify fsr_info[] depends on
> it at runtime
> ARM: 6268/1: ARMv6K and ARMv7 use fault statuses 3 and 6 as
> Access Flag fault
>
> Leif Lindholm (1):
> ARM: Add SWP/SWPB emulation for ARMv7 processors (v5)
>
> Linus Torvalds (1):
> Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
>
> Linus Walleij (17):
> ARM: 6153/1: nomadik MTU to use dynamic shift and mult assignment
> ARM: 6204/1: Fixups for the RealView PB1176
> ARM: 6227/1: PL022 SSP platform data for the RealViews
> ARM: 6228/1: PL022 SSP platform data for the Versatile
> ARM: 6222/1: add memory types for the TCMs
> ARM: 6223/1: support multiple TCM banks
> ARM: 6224/1: print TCM whereabouts in init message
> ARM: 6215/2: add character LCD platform data for RealView and Versatile
> ARM: 6234/1: move SPEAr to use common mult/shift calculation code
> ARM: 6159/1: Move IOP to use common mult/shift calculation code
> ARM: 6214/2: driver for the character LCD found in ARM refdesigns
> ARM: 6235/2: driver for the LEDs found in the later ARM refdesigns
> ARM: 6264/1: fix Versatile Express LED oversight
> ARM: 6225/1: make TCM allocation static and common for all archs
> ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivative
> ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivative
> ARM: 6278/2: fix regression in RealView after the introduction of pclk
>
> Luotao Fu (2):
> pca100: add framebuffer device support and TFT
> pca100: clean up GPIO pin multiplexing
>
> Magnus Damm (3):
> ARM: 6206/1: CONFIG_FORCE_MAX_ZONEORDER update for SH-Mobile ARM
> ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
> ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128
>
> Marc Kleine-Budde (5):
> mx25: add flexcan address and interrupt definition
> mx35: adjust flexcan clock definition
> mx35: add flexcan address
> imx: dynamically register flexcan devices for mx25 and mx35
> pcm043: register flexcan device
>
> Martin Michlmayr (6):
> [ARM] Kirkwood: Export GPIO indicating jumper setting of JP1
> [ARM] Kirkwood: Fix explanation of MPP45 for QNAP TS41x
> [ARM] orion5x: Set links to solid on D-Link DNS-323
> [ARM] Kirkwood: Add MPP44 (board ID) on TS-219
> [ARM] Kirkwood: Add support for HP t5325 Thin Client
> [ARM] Orion: DNS-323 C1 requires phylib
>
> Mathias Nyman (1):
> omap: tsl2563 ALS support for Nokia N900
>
> Michael Bohan (1):
> arm: mm: Don't free prohibited memmap entries
>
> Michal Marek (1):
> ARM: 6328/1: Build with -fno-dwarf2-cfi-asm
>
> Mika Westerberg (6):
> ARM: 6116/1: kdump: reserve memory for crashkernel
> ARM: 6117/1: kdump: implement crash_setup_regs()
> ARM: 6118/1: kdump: implement machine_crash_shutdown()
> ARM: 6119/1: kdump: skip indirection page when crashing
> ARM: 6120/1: kdump: implement copy_oldmem_page()
> ARM: 6122/1: kdump: add support for elfcorehdr parameter
>
> Mikael Pettersson (1):
> ARM: 6329/1: wire up sys_accept4() on ARM
>
> Mike Rapoport (2):
> omap3: introduce omap3_map_io
> OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings
>
> Nicolas Ferre (2):
> ARM: 6169/1: AT91: add new at91 chips in at91sam9g45 family
> ARM: 6185/1: AT91: PM: dual ram controller support
>
> Nicolas Pitre (19):
> [ARM] implement arch_randomize_brk()
> [ARM] add address randomization to mmap()
> ARM: initial stack protector (-fstack-protector) support
> ARM: stack protector: change the canary value per task
> [ARM] Kirkwood: fix HP t5325 after commit 6605742f2a
> [ARM] Kirkwood: more factorization of the PCIe init code
> [ARM] Kirkwood: add missing machine targets to defconfig
> Merge commit '7b70c4275f'
> Merge remote branch 'catalin/stable-2.6.35'
> Merge remote branch 'willd/for-linaro'
> Merge commit 'd21872b'
> Merge commit 'linaro_merge_100811'; commit 'v2.6.35.2' into
> linaro_stable_10.11
> Revert "perf symbols: work around incorrect ET_EXEC symbol adjustment"
> Merge remote branch 'remotes/willd/perf-tools' into linaro_stable_10.11
> ARM: fix ASLR of PIE executables
> Merge commit 'v2.6.35.3' into linaro_stable_10.11
> Merge commit 'v2.6.35.4' into linaro-2.6.35
> ARM: link board specific files after core files
> Merge remote branch 'willd/for-linaro-stable' into linaro-2.6.35
>
> Nishanth Menon (4):
> omap2/3/4: serial: remove initialization sparse warnings
> omap2/3/4: serial: kill dev_attr_sleep_timeout sparse warn
> omap2/3/4: serial: introduce errata handling
> omap2/3: id: fix sparse warning
>
> Ohad Ben-Cohen (6):
> omap: zoom2: wlan board muxing
> omap: zoom3: wlan board muxing
> omap: mailbox: convert rwlocks to spinlock
> omap: mailbox cleanup: split MODULE_AUTHOR line
> omap: mailbox: remove (un)likely macros from cold paths
> omap: mailbox: convert block api to kfifo
>
> Olaf Rempel (1):
> [ARM] orion/kirkwood: reset PCIe unit on boot
>
> Paul Walmsley (9):
> OMAP: clock: add kerneldoc for structures; move flags closer to structs
> OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz
> oscillator)
> OMAP1: clock: some cleanup
> OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module
> idle in _setup()
> OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods
> OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_va
> OMAP2+: hwmod/device: update documentation and copyright
> OMAP: PM constraints: add return values; add requesting device
> param to omap_pm_set_max_dev_wakeup_lat()
> OMAP: PM constraints: add omap_pm_set_min_clk_rate()
>
> Pavel Machek (1):
> Add GPIO support for HTC Dream.
>
> Rabin Vincent (24):
> ARM: 6150/1: gic: implement set_type
> ARM: 6147/1: nomadik-gpio: set val in ->direction_output()
> ARM: 6148/1: nomadik-gpio: add function to configure pullup/pulldown
> ARM: 6149/1: nomadik-gpio: add function to configure sleep mode behaviour
> ARM: 6154/1: nomadik-gpio: refactor nmk_gpio_set_mode
> ARM: 6155/1: nomadik-gpio: add pin configuration API
> ARM: 6156/1: nomadik-gpio: switch to core_initcall
> ARM: 6175/1: nomadik-gpio: implement set_wake
> ARM: 6176/1: nomadik-gpio: implement to_irq
> ARM: 6177/1: nomadik-gpio: fix "ignoring return value" warning
> ARM: 6161/1: mop500: add basic pin configuration
> ARM: 6160/1: ux500: add DB8500 pin configs
> ARM: 6266/1: ux500: add separate irq lists for DB8500 and DB5500
> ARM: 6267/1: mop500: add AB8500 interrupt support
> ARM: 6237/1: mmci: use sg_miter API to fix multi-page sg handling
> ARM: 6238/1: mmci: fix multi block transfers
> ARM: 6239/1: mmci: let core poll for card detection
> ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
> ARM: 6244/1: mmci: add variant data and default MCICLOCK support
> ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
> ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
> ARM: 6287/1: ftrace: clean up mcount assembly indentation
> ARM: 6288/1: ftrace: document mcount formats
> ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR"
>
> Rajendra Nayak (2):
> OMAP4: hwmod: Enable omap_device build for OMAP4
> omap4: suspend: Add basic system suspend support
>
> Robert Nelson (3):
> ARM: OMAP: Beagle: revision detection
> ARM: OMAP: Beagle: only Cx boards use pin 23 for write protect
> ARM: OMAP: Beagle: no gpio_wp pin connection on xM
>
> Rogerio Pimentel (1):
> mx27_3ds: add support for the keypad
>
> Russell King (39):
> ARM: Prohibit ioremap() on kernel managed RAM
> ARM: Remove support for LinkUp Systems L7200 SDP.
> Merge git://git.linaro.org/nico/arm_security into devel-stable
> ARM: Precalculate vmalloc_min
> ARM: Remove DISCONTIGMEM support
> ARM: Remove 'node' argument form arch_adjust_zones()
> ARM: Move platform memory reservations out of generic code
> ARM: OMAP: Cleanup OMAP FB SDRAM reservation
> ARM: OMAP: Convert to use ->reserve method to reserve boot time memory
> ARM: early_alloc()
> Merge branch 'l7200' into devel
> Merge git://git.kernel.org/.../nico/orion into devel-stable
> ARM: AMBA: Add pclk definition for platforms using primecells
> Merge branch 'master' of
> git://git.infradead.org/users/cbou/linux-cns3xxx into devel-stable
> ARM: fix build warning in asm/elf.h
> ARM: early_pte_alloc()
> ARM: initial LMB trial
> ARM: Convert platform reservations to use LMB rather than bootmem
> ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMB
> ARM: LMB: Convert arm_memory_present() to use LMB memory information
> ARM: LMB: convert pfn_valid to use LMB
> ARM: Remove unnecessary call to find_limits()
> ARM: Versatile: fix section mismatch
> Merge branch 'origin' into misc
> ARM: use generic ioremap_page_range()
> ARM: DMA coherent allocator: align remapped addresses
> ARM: Factor out common code from cpu_proc_fin()
> ARM: SMP: Always enable clock event broadcast support
> ARM: call machine_shutdown() from machine_halt(), etc
> ARM: Fix section build warnings for AMBA drivers
> Merge branch 'wells/lpc32xx-arch_v2' of
> git://git.lpclinux.com/linux-2.6-lpc into devel-stable
> Merge branch 'for-rmk' of
> git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable
> Merge branch 'arm/booting' of
> git://git.pengutronix.de/git/ukl/linux-2.6 into devel-stable
> ARM: AMBA: Add pclk support to AMBA bus infrastructure
> Merge branch 'shmobile' into devel
> Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb',
> 'nomadik', 'nuc', 'pl', 'spear' and 'versatile' into devel
> Merge branch 'misc' into devel
> Merge branch 'devel-stable' into devel
> ARM: Tighten check for allowable CPSR values
>
> Ryan Mallon (3):
> ARM: 6200/1: AT91: Define NR_BUILTIN_GPIO
> ARM: 6209/2: at91: Add support for Bluewater Systems Snapper
> 9260/9G20 modules
> ARM: 6209/3: at91_udc: Add vbus polarity and polling mode
>
> Saeed Bishara (6):
> [ARM] Kirkwood: configure NAND mpp's for db88f6281
> [ARM] Kirkwood: add support for rev A1 of the 88f6192 and 88f6180 chips.
> [ARM] Kirkwood: Add support for 88f6282
> [ARM] PCI: add platform private data to pci_sys_data
> [ARM] Kirkwood: add support for PCIe1
> [ARM] Dove: platform device registration for the sdio interfaces
>
> Samu Onkalo (1):
> omap: dma: Support for prefetch in destination synchronizedtransfer
>
> Santosh Shilimkar (3):
> omap4: mmc: Fix the regulator resource for MMC2 on 4430sdp
> omap4: Add smc API to read AuxCoreBoot0 register
> omap4: hotplug: Add basic CPU hotplug support
>
> Sascha Hauer (2):
> mxc_nand: Fix OOB handling
> mx25: flexcan clock support
>
> Sergio Aguirre (1):
> omap3: Unify omap2_set_globals_3[43,6x]x functions
>
> Shubhrajyoti Datta (1):
> omap4: Board changes for 4430sdp tmp105 temperature sensor
>
> Simon Guinot (3):
> [ARM] Kirkwood: add LaCie Network Space Max v2 support
> leds: add LED driver for Network Space v2 LEDs
> [ARM] Kirkwood: update LED support for Network Space v2
>
> Steve Sakoman (1):
> omap: Overo: Fix support for second ethernet port
>
> Sukumar Ghorai (8):
> omap3 gpmc: functionality enhancement
> omap3 nand: cleanup virtual address usages
> omap3 nand: fix issue in board file to detect nand
> omap3 flash: rename board-sdp-flash.c to be use by other boards
> omap3: add support for NAND on zoom2 board
> omap3: add support for NAND on zoom3 board
> omap-3630-sdp : Add support for Flash
> omap3: add support for NAND on LDP board
>
> Thomas Weber (10):
> OMAP2: Devkit8000: Cleanup for power supplies
> OMAP2: Devkit8000: change panel to generic panel
> OMAP2: Devkit8000: Remove unneeded VDVI supply
> OMAP2: Devkit8000: Remove non existing vsim supply
> OMAP2: Devkit8000: Remove en-/disable for tv panel
> OMAP2: Devkit8000: Using the REGULATOR_SUPPLY macro
> OMAP2: Devkit8000: Using gpio_is_valid macro
> OMAP2: Devkit8000: Remove unused omap_board_config
> OMAP2: Devkit8000: Fix regulator for power supply
> OMAP2: powerdomain: Add break in switch statement
>
> Tim Gardner (5):
> UBUNTU: [Config] Find ABI files according to their source package name
> UBUNTU: [Config] getabi: Only get armel omap and vexpress
> UBUNTU: Bump ABI
> UBUNTU: [Config] Changed flavour names from {omap,vexpress} to
> linaro-{omap,vexpress}
> UBUNTU: Linaro-2.6.35-1002.6
>
> Tony Lindgren (36):
> Merge branch 'v2.6.35-rc3-iommu-for-next' of
> git://gitorious.org/~doyu/lk/mainline into omap-for-linus
> omap: Separate out omap2 FS USB platform init functions
> omap: Move omap2 FS USB platform init code into mach-omap2/usb-fs.c
> omap: Enable interface clock for omap2 FS USB
> omap: Move omap1 USB platform init code into mach-omap1/usb.c
> omap: mux: Fix omap_mux_init_gpio for omap24xx
> omap: mux: Renumber package defines to make room for older 24xx packages
> omap: mux: Allow compiling in new mux code on all mach-omap2 systems
> omap: mux: Remove unncessary parens from mux34xx.c
> omap: mux: Add data for 2420
> omap: mux: Add data for 2430
> omap: mux: Select SIP package for H4
> omap: mux: Select POP package for Apollon
> omap: mux: Select POP package for N8X0
> omap: mux: Select POP package for 2430SDP
> omap: mux: Make omap2 FS USB code use new mux functions
> omap: mux: Do keypad muxing in board-*.c files
> omap: mux: Mux Apollon LCD power in board-apollon.c
> omap: mux: Mux 2430 USB0HS_STP in board-2430.c
> omap: mux: Convert 2420 platform init code to use new mux code
> omap: mux: Remove old mux code
> ARM: Disable VGA console for ARM in most cases
> omap: Use 32KiHZ timer by default
> omap: Make omap specific features appear under Kconfig menu
> omap2/3/4: Move Kconfig options to mach-omap2/Kconfig
> omap2/3/4: Select all omaps and boards by default
> omap2/3/4: Add Kconfig option to compile in typical omap features
> ARM: 6203/1: Make VFPv3 usable on ARMv6
> ARM: 6207/1: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check
> for it on V6
> omap: Add back UART MDR1 check into uncompress.h
> omap2: Fix GPIO numbers and smc91x for 2430sdp
> Merge branch 'devel-misc' into omap-for-linus
> Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into
> omap-for-linus
> Merge branch 'devel-map-io' into omap-for-linus
> Merge branch 'v2.6.35-omap-mailbox-for-next' of
> git://gitorious.org/~doyu/lk/mainline into omap-for-linus
> arm: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6
>
> Uwe Kleine-König (69):
> ARM: mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its
> arch number
> ARM: mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its
> arch number
> ARM: zImage: don't hard code the stack size twice
> ARM: zImage: some comments for __armv3_mpu_cache_on
> ARM: zImage: __armv3_mpu_cache_flush: respect should-be-zero specification
> ARM: zImage: fix comments for cache_on, cache_off and cache_clean_flush
> ARM: zImage: annotate debug functions about corrupted registers
> ARM: mx1: don't use deprecated symbol names
> ARM: mx1/scb9328: fix type of uart1_mxc_exit to make compiler happy
> ARM: mx2/mx27_3ds: document alternative names and remove empty header
> ARM: imx: remove empty and unused board headers
> ARM: mx3/kzm_arm11_01: fold board header in its only user
> ARM: mx2/mx21ads: fold board header in its only user
> ARM: mx2/mx27ads: fold board header in its only user
> ARM: mx3/qong: get rid of nearly empty header
> ARM: mx3/mx31_3ds: fold board header in its only user
> ARM: mx3/mx31ads: fold board header in its only user
> ARM: mxc: grammar fix
> ARM: imx: rename mach dir for mx21 and mx27 to mach-imx
> ARM: imx/mx1: fold crm_regs.h into its only consumer
> ARM: imx: get rid of mxc_gpio_init
> ARM: imx: fold serial.c into devices.c
> ARM: imx1: rename imx_csi_device to match its .name
> ARM: imx1: rename imx_i2c_device to follow a common naming scheme
> ARM: imx1: rename imx_uart[12]_device to follow a common naming scheme
> ARM: imx: rename mxc_uart_devicex to follow a common naming scheme
> ARM: imx: move mx1 support to mach-imx
> ARM: imx: Kconfig: use an if block instead of a depend for many symbols
> ARM: imx: prepare deprecating ARCH_MX1, MACH_MX2, MACH_MX21 and MACH_MX27
> ARM: imx: new Kconfig symbol and feature test macro for DMA on mx1 and mx2
> ARM: imx: new helper function imx_add_platform_device
> MTD: mxc_nand: make bit fields unsigned to please sparse
> ARM: imx: remove paragraphs with old address of the FSF
> ARM: mx25: remove paragraphs with old address of the FSF
> ARM: mx3: remove paragraphs with old address of the FSF
> ARM: mxc91231: remove paragraphs with old address of the FSF
> ARM: mxc: remove paragraphs with old address of the FSF
> ARM: imx: Change the way nand devices are registered (generic part)
> ARM: imx: Change the way nand devices are registered (imx21)
> ARM: imx: Change the way nand devices are registered (imx25)
> ARM: imx: Change the way nand devices are registered (imx27)
> ARM: imx: Change the way nand devices are registered (imx31)
> ARM: imx: Change the way nand devices are registered (imx35)
> ARM: imx: dynamically register imx-i2c devices (generic part)
> ARM: imx: dynamically register imx-i2c devices (imx1)
> ARM: imx: dynamically register imx-i2c devices (imx21)
> ARM: imx: dynamically register imx-i2c devices (imx25)
> ARM: imx: dynamically register imx-i2c devices (imx27)
> ARM: imx: dynamically register imx-i2c devices (imx31)
> ARM: imx: dynamically register imx-i2c devices (imx35)
> ARM: imx: dynamically register spi_imx devices (generic part)
> ARM: imx: dynamically register spi_imx devices (imx21)
> ARM: imx: dynamically register spi_imx devices (imx25)
> ARM: imx: dynamically register spi_imx devices (imx27)
> ARM: imx: dynamically register spi_imx devices (imx31)
> ARM: imx: dynamically register spi_imx devices (imx35)
> ARM: imx: dynamically register imx-uart devices (generic part)
> ARM: imx: dynamically register imx-uart devices (imx1)
> ARM: imx: dynamically register imx-uart devices (imx21)
> ARM: imx: dynamically register imx-uart devices (imx25)
> ARM: imx: dynamically register imx-uart devices (imx27)
> ARM: imx: dynamically register imx-uart devices (imx31)
> ARM: imx: dynamically register imx-uart devices (imx35)
> ARM: mx3: complement uart init routine with an exit routine
> ARM: remove bit-rotten STANDALONE_DEBUG for decompressor
> ARM: zImage: don't define unused symbol initrd_phys
> ARM: deprecate support for old way to pass kernel parameters
> Merge branch 'imx/for-2.6.36' of
> git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD
> mmc: build fix: mmc_pm_notify is only available with CONFIG_PM=y
>
> Vincent Sanders (1):
> Remove ARM default configurations which duplicate omap3_defconfig
>
> Will Deacon (18):
> ARM: 6218/1: Versatile Express: add support for local timers on
> CA9X4 daughterboard
> ARM: 6198/1: perf probe: Add ARM DWARF register number mappings
> ARM: 6199/1: Add kprobe-based event tracer
> ARM: 6213/1: atomic64_test: add ARM as supported architecture
> Versatile Express: add support for local timers on CA9X4 daughterboard
> ARM: Add kprobe-based event tracer
> ARM: perf probe: Add ARM DWARF register number mappings
> ARM: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a
> faulty ASID
> ARM: flush_ptrace_access: invalidate all I-caches
> ARM: atomic64_test: add ARM as supported architecture
> Merge branches 'atomic-fixes', 'misc-patches', 'perf-probe' and
> 'sw-breakpoint' into for-linaro
> Merge branch 'perf-tools' into for-linaro
> ARM: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a
> faulty ASID
> ARM: flush_ptrace_access: invalidate all I-caches
> oprofile: don't call arch exit code from init code on failure
> ARM: oprofile: fix and simplify init/exit functions
> ARM: perf: reword comments relating to perf_event_do_pending
> ARM: perf: fix event validation
>
> Wolfram Sang (1):
> pcm037/pcm043/pca100: fix ULPI-related build warnings
>
> eric miao (2):
> ARM: 6197/2: preliminary support for sparse IRQ
> ARM: 6251/1: Make SPARSE_IRQ a hidden option
>
> stanley.miao (1):
> OMAP3: AM3505/3517 do not have IO wakeup capability
>
> wanzongshun (5):
> ARM: 6231/1: re-organize the nuc900 lcd arch platform data setting
> ARM: 6232/1: add nuc900 keypad arch platform data
> ARM: 6249/1: add nuc900 kpi platform_device structure to nuc910_dev
> ARM: 6250/1: patch for modifying spi flash configuration
> ARM: 6274/1: add global control registers definition header file
> for nuc900
>
> Documentation/arm/00-INDEX | 2 +
> Documentation/arm/memory.txt | 8 +-
> Documentation/arm/swp_emulation | 27 +
> Documentation/arm/tcm.txt | 30 +-
> arch/arm/Kconfig | 193 +-
> arch/arm/Makefile | 16 +-
> arch/arm/boot/Makefile | 8 +-
> arch/arm/boot/compressed/Makefile | 15 +-
> arch/arm/boot/compressed/Makefile.debug | 23 -
> arch/arm/boot/compressed/head-l7200.S | 29 -
> arch/arm/boot/compressed/head.S | 41 +-
> arch/arm/boot/compressed/misc.c | 20 -
> arch/arm/common/gic.c | 46 +
> arch/arm/common/sa1111.c | 5 +-
> arch/arm/configs/am3517_evm_defconfig | 127 -
> arch/arm/configs/cm_t35_defconfig | 157 -
> arch/arm/configs/devkit8000_defconfig | 184 -
> arch/arm/configs/igep0020_defconfig | 179 -
> arch/arm/configs/kirkwood_defconfig | 8 +
> arch/arm/configs/lusl7200_defconfig | 23 -
> arch/arm/configs/omap3_beagle_defconfig | 134 -
> arch/arm/configs/omap3_evm_defconfig | 160 -
> arch/arm/configs/omap3_pandora_defconfig | 158 -
> arch/arm/configs/omap3_stalker_lks_defconfig | 150 -
> arch/arm/configs/omap3_touchbook_defconfig | 621 --
> arch/arm/configs/omap_2430sdp_defconfig | 136 -
> arch/arm/configs/omap_3430sdp_defconfig | 178 -
> arch/arm/configs/omap_3630sdp_defconfig | 154 -
> arch/arm/configs/omap_apollon_2420_defconfig | 92 -
> arch/arm/configs/omap_h4_2420_defconfig | 107 -
> arch/arm/configs/omap_ldp_defconfig | 135 -
> arch/arm/configs/omap_zoom2_defconfig | 143 -
> arch/arm/configs/omap_zoom3_defconfig | 155 -
> arch/arm/configs/overo_defconfig | 275 -
> arch/arm/configs/rx51_defconfig | 222 -
> arch/arm/include/asm/assembler.h | 13 +-
> arch/arm/include/asm/cacheflush.h | 9 +-
> arch/arm/include/asm/domain.h | 31 +-
> arch/arm/include/asm/elf.h | 3 +
> arch/arm/include/asm/futex.h | 9 +-
> arch/arm/include/asm/hwcap.h | 1 +
> arch/arm/include/asm/irq.h | 2 +
> arch/arm/include/asm/kexec.h | 22 +-
> arch/arm/include/asm/mach/arch.h | 2 +
> arch/arm/include/asm/mach/irq.h | 1 +
> arch/arm/include/asm/mach/map.h | 2 +
> arch/arm/include/asm/mach/pci.h | 1 +
> arch/arm/include/asm/memblock.h | 16 +
> arch/arm/include/asm/memory.h | 76 +-
> arch/arm/include/asm/mmzone.h | 30 -
> arch/arm/include/asm/perf_event.h | 2 +-
> arch/arm/include/asm/pgtable.h | 29 +-
> arch/arm/include/asm/ptrace.h | 36 +
> arch/arm/include/asm/setup.h | 8 +-
> arch/arm/include/asm/smp_plat.h | 4 +
> arch/arm/include/asm/system.h | 2 +-
> arch/arm/include/asm/tlbflush.h | 12 +-
> arch/arm/include/asm/tls.h | 46 +
> arch/arm/include/asm/traps.h | 2 +
> arch/arm/include/asm/uaccess.h | 16 +-
> arch/arm/include/asm/unistd.h | 1 +
> arch/arm/include/asm/vfpmacros.h | 18 +
> arch/arm/kernel/Makefile | 6 +-
> arch/arm/kernel/calls.S | 1 +
> arch/arm/kernel/compat.c | 7 -
> arch/arm/kernel/compat.h | 2 -
> arch/arm/kernel/crash_dump.c | 60 +
> arch/arm/kernel/entry-armv.S | 29 +-
> arch/arm/kernel/entry-common.S | 124 +-
> arch/arm/kernel/fiq.c | 5 +
> arch/arm/kernel/irq.c | 41 +-
> arch/arm/kernel/machine_kexec.c | 14 +-
> arch/arm/kernel/module.c | 34 +
> arch/arm/kernel/perf_event.c | 12 +-
> arch/arm/kernel/process.c | 29 +-
> arch/arm/kernel/ptrace.c | 96 +
> arch/arm/kernel/relocate_kernel.S | 6 +
> arch/arm/kernel/setup.c | 113 +-
> arch/arm/kernel/smp.c | 17 +-
> arch/arm/kernel/smp_twd.c | 3 +-
> arch/arm/kernel/swp_emulate.c | 260 +
> arch/arm/kernel/tcm.c | 118 +-
> arch/arm/kernel/traps.c | 55 +-
> arch/arm/lib/Makefile | 1 -
> arch/arm/lib/getuser.S | 13 +-
> arch/arm/lib/putuser.S | 29 +-
> arch/arm/lib/uaccess.S | 83 +-
> arch/arm/mach-aaec2000/include/mach/memory.h | 10 -
> arch/arm/mach-at91/Kconfig | 11 +
> arch/arm/mach-at91/Makefile | 3 +
> arch/arm/mach-at91/at91sam9g45.c | 11 +
> arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 45 +
> arch/arm/mach-at91/board-sam9g20ek.c | 45 +
> arch/arm/mach-at91/board-snapper9260.c | 189 +
> arch/arm/mach-at91/include/mach/at91cap9.h | 2 +-
> arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h | 22 +-
> arch/arm/mach-at91/include/mach/at91sam9260.h | 2 +-
> arch/arm/mach-at91/include/mach/at91sam9261.h | 2 +-
> arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 130 +
> arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 23 +-
> arch/arm/mach-at91/include/mach/at91sam9rl.h | 2 +-
> arch/arm/mach-at91/include/mach/board.h | 2 +
> arch/arm/mach-at91/include/mach/cpu.h | 10 +
> arch/arm/mach-at91/include/mach/gpio.h | 1 +
> arch/arm/mach-at91/pm.h | 49 +-
> arch/arm/mach-at91/pm_slowclock.S | 74 +-
> arch/arm/mach-bcmring/core.c | 23 +-
> arch/arm/mach-clps711x/Kconfig | 1 -
> arch/arm/mach-clps711x/clep7312.c | 1 -
> arch/arm/mach-clps711x/edb7211-arch.c | 10 +-
> arch/arm/mach-clps711x/fortunet.c | 1 -
> arch/arm/mach-clps711x/include/mach/memory.h | 2 -
> arch/arm/mach-cns3xxx/Makefile | 3 +-
> arch/arm/mach-cns3xxx/cns3420vb.c | 4 +
> arch/arm/mach-cns3xxx/devices.c | 111 +
> arch/arm/mach-cns3xxx/devices.h | 20 +
> arch/arm/mach-cns3xxx/include/mach/cns3xxx.h | 91 +-
> arch/arm/mach-cns3xxx/pcie.c | 389 +
> arch/arm/mach-cns3xxx/pm.c | 31 +-
> arch/arm/mach-davinci/include/mach/memory.h | 9 +-
> arch/arm/mach-dove/common.c | 61 +
> arch/arm/mach-dove/common.h | 2 +
> arch/arm/mach-dove/dove-db-setup.c | 2 +
> arch/arm/mach-ep93xx/adssphere.c | 24 +-
> arch/arm/mach-ep93xx/clock.c | 2 +-
> arch/arm/mach-ep93xx/core.c | 46 +-
> arch/arm/mach-ep93xx/edb93xx.c | 31 +-
> arch/arm/mach-ep93xx/gesbc9312.c | 24 +-
> arch/arm/mach-ep93xx/include/mach/platform.h | 3 +
> arch/arm/mach-ep93xx/micro9.c | 37 +-
> arch/arm/mach-ep93xx/simone.c | 24 +-
> arch/arm/mach-ep93xx/ts72xx.c | 27 +-
> arch/arm/mach-imx/Kconfig | 193 +
> arch/arm/{mach-mx2 => mach-imx}/Makefile | 18 +-
> arch/arm/{mach-mx2 => mach-imx}/Makefile.boot | 4 +
> .../{mach-mx1/clock.c => mach-imx/clock-imx1.c} | 50 +-
> .../clock_imx21.c => mach-imx/clock-imx21.c} | 0
> .../clock_imx27.c => mach-imx/clock-imx27.c} | 2 +-
> .../{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} | 0
> arch/arm/mach-imx/devices-imx1.h | 18 +
> arch/arm/mach-imx/devices-imx21.h | 30 +
> arch/arm/mach-imx/devices-imx27.h | 38 +
> arch/arm/{mach-mx2 => mach-imx}/devices.c | 296 +-
> arch/arm/{mach-mx2 => mach-imx}/devices.h | 32 +-
> .../{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c} | 4 +-
> arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 392 +
> arch/arm/mach-imx/include/mach/dma-mx1-mx2.h | 10 +
> .../include/mach/dma-v1.h} | 10 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c | 122 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c | 11 +-
> arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c | 34 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c | 58 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c | 40 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c | 76 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c | 36 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c | 114 +-
> arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c | 33 +-
> arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c | 21 +-
> .../arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} | 23 +-
> arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c | 5 +-
> arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c | 5 +-
> .../ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c} | 0
> .../mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} | 0
> arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c | 0
> arch/arm/mach-imx/pm-imx27.c | 46 +
> arch/arm/mach-integrator/common.h | 1 +
> arch/arm/mach-integrator/core.c | 19 +-
> arch/arm/mach-integrator/integrator_ap.c | 3 +
> arch/arm/mach-integrator/integrator_cp.c | 3 +
> arch/arm/mach-integrator/pci_v3.c | 8 +-
> arch/arm/mach-iop13xx/include/mach/memory.h | 2 -
> arch/arm/mach-iop13xx/pci.c | 2 +-
> arch/arm/mach-ixp2000/pci.c | 2 +-
> arch/arm/mach-ixp23xx/pci.c | 2 +-
> arch/arm/mach-ixp4xx/common-pci.c | 7 +-
> arch/arm/mach-ixp4xx/include/mach/memory.h | 6 +-
> arch/arm/mach-kirkwood/Kconfig | 19 +
> arch/arm/mach-kirkwood/Makefile | 2 +
> arch/arm/mach-kirkwood/addr-map.c | 10 +-
> arch/arm/mach-kirkwood/common.c | 38 +-
> arch/arm/mach-kirkwood/common.h | 5 +-
> arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 18 +-
> arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 3 +-
> arch/arm/mach-kirkwood/include/mach/irqs.h | 1 +
> arch/arm/mach-kirkwood/include/mach/kirkwood.h | 39 +-
> arch/arm/mach-kirkwood/include/mach/leds-ns2.h | 26 +
> arch/arm/mach-kirkwood/mpp.c | 3 +-
> arch/arm/mach-kirkwood/mpp.h | 596 +-
> arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c | 2 +-
> arch/arm/mach-kirkwood/netspace_v2-setup.c | 104 +-
> arch/arm/mach-kirkwood/netxbig_v2-setup.c | 32 +-
> arch/arm/mach-kirkwood/openrd-setup.c | 29 +-
> arch/arm/mach-kirkwood/pcie.c | 174 +-
> arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 2 +-
> arch/arm/mach-kirkwood/rd88f6281-setup.c | 2 +-
> arch/arm/mach-kirkwood/t5325-setup.c | 194 +
> arch/arm/mach-kirkwood/ts219-setup.c | 11 +-
> arch/arm/mach-kirkwood/ts41x-setup.c | 39 +-
> arch/arm/mach-ks8695/pci.c | 4 +-
> arch/arm/mach-l7200/Makefile | 11 -
> arch/arm/mach-l7200/Makefile.boot | 2 -
> arch/arm/mach-l7200/core.c | 100 -
> arch/arm/mach-l7200/include/mach/aux_reg.h | 28 -
> arch/arm/mach-l7200/include/mach/debug-macro.S | 40 -
> arch/arm/mach-l7200/include/mach/entry-macro.S | 35 -
> arch/arm/mach-l7200/include/mach/gp_timers.h | 42 -
> arch/arm/mach-l7200/include/mach/gpio.h | 105 -
> arch/arm/mach-l7200/include/mach/hardware.h | 57 -
> arch/arm/mach-l7200/include/mach/io.h | 21 -
> arch/arm/mach-l7200/include/mach/irqs.h | 56 -
> arch/arm/mach-l7200/include/mach/memory.h | 26 -
> arch/arm/mach-l7200/include/mach/pmpcon.h | 46 -
> arch/arm/mach-l7200/include/mach/pmu.h | 125 -
> arch/arm/mach-l7200/include/mach/serial.h | 37 -
> arch/arm/mach-l7200/include/mach/serial_l7200.h | 101 -
> arch/arm/mach-l7200/include/mach/sib.h | 119 -
> arch/arm/mach-l7200/include/mach/sys-clock.h | 67 -
> arch/arm/mach-l7200/include/mach/system.h | 29 -
> arch/arm/mach-l7200/include/mach/time.h | 73 -
> arch/arm/mach-l7200/include/mach/timex.h | 20 -
> arch/arm/mach-l7200/include/mach/uncompress.h | 39 -
> arch/arm/mach-l7200/include/mach/vmalloc.h | 4 -
> arch/arm/mach-lh7a40x/include/mach/memory.h | 44 -
> arch/arm/mach-lpc32xx/Kconfig | 33 +
> arch/arm/mach-lpc32xx/Makefile | 8 +
> arch/arm/mach-lpc32xx/Makefile.boot | 4 +
> arch/arm/mach-lpc32xx/clock.c | 1137 +++
> arch/arm/mach-lpc32xx/clock.h | 38 +
> arch/arm/mach-lpc32xx/common.c | 271 +
> arch/arm/mach-lpc32xx/common.h | 73 +
> arch/arm/mach-lpc32xx/gpiolib.c | 446 ++
> .../include/mach/clkdev.h} | 19 +-
> .../include/mach/debug-macro.S} | 25 +-
> arch/arm/mach-lpc32xx/include/mach/entry-macro.S | 47 +
> arch/arm/mach-lpc32xx/include/mach/gpio.h | 74 +
> arch/arm/mach-lpc32xx/include/mach/hardware.h | 34 +
> arch/arm/mach-lpc32xx/include/mach/i2c.h | 63 +
> .../include/mach/io.h} | 21 +-
> arch/arm/mach-lpc32xx/include/mach/irqs.h | 117 +
> .../include/mach/memory.h} | 21 +-
> arch/arm/mach-lpc32xx/include/mach/platform.h | 694 ++
> arch/arm/mach-lpc32xx/include/mach/system.h | 52 +
> .../include/mach/timex.h} | 22 +-
> arch/arm/mach-lpc32xx/include/mach/uncompress.h | 60 +
> .../include/mach/vmalloc.h} | 18 +-
> arch/arm/mach-lpc32xx/irq.c | 432 +
> arch/arm/mach-lpc32xx/phy3250.c | 397 +
> arch/arm/mach-lpc32xx/pm.c | 146 +
> arch/arm/mach-lpc32xx/serial.c | 190 +
> arch/arm/mach-lpc32xx/suspend.S | 151 +
> arch/arm/mach-lpc32xx/timer.c | 182 +
> arch/arm/mach-msm/Makefile | 2 +-
> arch/arm/mach-msm/board-trout-gpio.c | 112 +
> arch/arm/mach-msm/board-trout.c | 1 -
> arch/arm/mach-msm/board-trout.h | 157 +
> arch/arm/mach-msm/include/mach/gpio.h | 7 +
> arch/arm/mach-mx1/Kconfig | 19 -
> arch/arm/mach-mx1/Makefile | 15 -
> arch/arm/mach-mx1/Makefile.boot | 4 -
> arch/arm/mach-mx1/crm_regs.h | 55 -
> arch/arm/mach-mx1/devices.c | 242 -
> arch/arm/mach-mx1/devices.h | 7 -
> arch/arm/mach-mx2/Kconfig | 116 -
> arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 249 -
> arch/arm/mach-mx2/serial.c | 141 -
> arch/arm/mach-mx25/Kconfig | 23 +
> arch/arm/mach-mx25/Makefile | 4 +-
> arch/arm/mach-mx25/clock.c | 70 +-
> arch/arm/mach-mx25/devices-imx25.h | 43 +
> arch/arm/mach-mx25/devices.c | 313 +-
> arch/arm/mach-mx25/devices.h | 16 +-
> arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c | 260 +
> arch/arm/mach-mx25/mach-cpuimx25.c | 173 +
> .../mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} | 58 +-
> arch/arm/mach-mx25/mm.c | 7 +-
> arch/arm/mach-mx3/Kconfig | 53 +
> arch/arm/mach-mx3/Makefile | 4 +-
> arch/arm/mach-mx3/clock-imx35.c | 6 +-
> arch/arm/mach-mx3/devices-imx31.h | 38 +
> arch/arm/mach-mx3/devices-imx35.h | 37 +
> arch/arm/mach-mx3/devices.c | 247 +-
> arch/arm/mach-mx3/devices.h | 13 -
> arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c | 263 +
> arch/arm/mach-mx3/mach-armadillo5x0.c | 17 +-
> arch/arm/mach-mx3/mach-cpuimx35.c | 227 +
> arch/arm/mach-mx3/mach-kzm_arm11_01.c | 31 +-
> arch/arm/mach-mx3/mach-mx31_3ds.c | 256 +-
> arch/arm/mach-mx3/mach-mx31ads.c | 55 +-
> arch/arm/mach-mx3/mach-mx31lilly.c | 15 +-
> arch/arm/mach-mx3/mach-mx31lite.c | 17 +-
> arch/arm/mach-mx3/mach-mx31moboard.c | 50 +-
> .../mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} | 16 +-
> arch/arm/mach-mx3/mach-pcm037.c | 34 +-
> arch/arm/mach-mx3/mach-pcm037_eet.c | 7 +-
> arch/arm/mach-mx3/mach-pcm043.c | 31 +-
> arch/arm/mach-mx3/mach-qong.c | 16 +-
> arch/arm/mach-mx3/mm.c | 7 +-
> arch/arm/mach-mx3/mx31lilly-db.c | 14 +-
> arch/arm/mach-mx3/mx31lite-db.c | 15 +-
> arch/arm/mach-mx3/mx31moboard-devboard.c | 10 +-
> arch/arm/mach-mx3/mx31moboard-marxbot.c | 4 -
> arch/arm/mach-mx3/mx31moboard-smartbot.c | 11 +-
> arch/arm/mach-mx5/Kconfig | 27 +
> arch/arm/mach-mx5/Makefile | 4 +-
> arch/arm/mach-mx5/board-cpuimx51.c | 293 +
> arch/arm/mach-mx5/board-mx51_3ds.c | 164 +
> arch/arm/mach-mx5/board-mx51_babbage.c | 28 +-
> arch/arm/mach-mx5/clock-mx51.c | 16 +
> arch/arm/mach-mx5/devices.c | 83 +-
> arch/arm/mach-mx5/devices.h | 4 +
> arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 200 +
> arch/arm/mach-mx5/mm.c | 3 +
> arch/arm/mach-mxc91231/crm_regs.h | 5 -
> arch/arm/mach-mxc91231/devices.c | 2 +-
> arch/arm/mach-mxc91231/mm.c | 8 +-
> arch/arm/mach-nomadik/clock.c | 4 +
> arch/arm/mach-omap1/Kconfig | 13 +
> arch/arm/mach-omap1/Makefile | 3 +
> arch/arm/mach-omap1/board-ams-delta.c | 3 +-
> arch/arm/mach-omap1/board-fsample.c | 13 +
> arch/arm/mach-omap1/board-generic.c | 5 +-
> arch/arm/mach-omap1/board-h2.c | 32 +-
> arch/arm/mach-omap1/board-h3.c | 16 +-
> arch/arm/mach-omap1/board-htcherald.c | 3 +-
> arch/arm/mach-omap1/board-innovator.c | 5 +-
> arch/arm/mach-omap1/board-nokia770.c | 137 +-
> arch/arm/mach-omap1/board-osk.c | 3 +-
> arch/arm/mach-omap1/board-palmte.c | 87 +-
> arch/arm/mach-omap1/board-palmtt.c | 3 +-
> arch/arm/mach-omap1/board-palmz71.c | 16 +-
> arch/arm/mach-omap1/board-perseus2.c | 13 +
> arch/arm/mach-omap1/board-sx1.c | 5 +-
> arch/arm/mach-omap1/board-voiceblue.c | 3 +-
> arch/arm/mach-omap1/clock.c | 22 +-
> arch/arm/mach-omap1/clock.h | 2 +-
> arch/arm/mach-omap1/clock_data.c | 149 +-
> arch/arm/mach-omap1/devices.c | 72 -
> arch/arm/mach-omap1/include/mach/debug-macro.S | 10 +-
> arch/arm/mach-omap1/io.c | 2 -
> arch/arm/mach-omap1/mailbox.c | 55 +-
> arch/arm/mach-omap1/mcbsp.c | 3 -
> arch/arm/mach-omap1/mux.c | 6 +-
> arch/arm/mach-omap1/serial.c | 7 +
> arch/arm/mach-omap1/usb.c | 530 ++
> arch/arm/mach-omap2/Kconfig | 89 +
> arch/arm/mach-omap2/Makefile | 23 +-
> arch/arm/mach-omap2/board-2430sdp.c | 24 +-
> arch/arm/mach-omap2/board-3430sdp.c | 25 +-
> arch/arm/mach-omap2/board-3630sdp.c | 130 +-
> arch/arm/mach-omap2/board-4430sdp.c | 71 +-
> arch/arm/mach-omap2/board-am3517evm.c | 9 +-
> arch/arm/mach-omap2/board-apollon.c | 31 +-
> arch/arm/mach-omap2/board-cm-t35.c | 29 +-
> arch/arm/mach-omap2/board-devkit8000.c | 170 +-
> .../{board-sdp-flash.c => board-flash.c} | 93 +-
> arch/arm/mach-omap2/board-generic.c | 2 +-
> arch/arm/mach-omap2/board-h4.c | 61 +-
> arch/arm/mach-omap2/board-igep0020.c | 9 +-
> arch/arm/mach-omap2/board-ldp.c | 44 +-
> arch/arm/mach-omap2/board-n8x0.c | 14 +
> arch/arm/mach-omap2/board-omap3beagle.c | 17 +-
> arch/arm/mach-omap2/board-omap3evm.c | 9 +-
> arch/arm/mach-omap2/board-omap3pandora.c | 157 +-
> arch/arm/mach-omap2/board-omap3stalker.c | 8 +-
> arch/arm/mach-omap2/board-omap3touchbook.c | 34 +-
> arch/arm/mach-omap2/board-omap4panda.c | 304 +
> arch/arm/mach-omap2/board-overo.c | 75 +-
> arch/arm/mach-omap2/board-rx51-peripherals.c | 78 +-
> arch/arm/mach-omap2/board-rx51-video.c | 1 -
> arch/arm/mach-omap2/board-rx51.c | 3 +-
> arch/arm/mach-omap2/board-zoom2.c | 65 +-
> arch/arm/mach-omap2/board-zoom3.c | 65 +-
> arch/arm/mach-omap2/clock3xxx_data.c | 7 +-
> arch/arm/mach-omap2/cm.c | 6 +-
> arch/arm/mach-omap2/devices.c | 88 +-
> arch/arm/mach-omap2/gpmc-nand.c | 37 +-
> arch/arm/mach-omap2/gpmc.c | 284 +-
> arch/arm/mach-omap2/i2c.c | 27 +-
> arch/arm/mach-omap2/id.c | 64 +-
> .../include/mach/{board-sdp.h => board-flash.h} | 9 +-
> arch/arm/mach-omap2/include/mach/board-zoom.h | 6 +
> arch/arm/mach-omap2/include/mach/debug-macro.S | 29 +-
> arch/arm/mach-omap2/include/mach/id.h | 22 +
> arch/arm/mach-omap2/include/mach/omap4-common.h | 7 +
> arch/arm/mach-omap2/io.c | 16 +-
> arch/arm/mach-omap2/iommu2.c | 44 +-
> arch/arm/mach-omap2/mailbox.c | 182 +-
> arch/arm/mach-omap2/mcbsp.c | 13 +-
> arch/arm/mach-omap2/mux.c | 338 +-
> arch/arm/mach-omap2/mux.h | 28 +-
> arch/arm/mach-omap2/mux2420.c | 688 ++
> arch/arm/mach-omap2/mux2420.h | 282 +
> arch/arm/mach-omap2/mux2430.c | 791 ++
> arch/arm/mach-omap2/mux2430.h | 370 +
> arch/arm/mach-omap2/mux34xx.c | 8 +-
> arch/arm/mach-omap2/omap-headsmp.S | 16 -
> arch/arm/mach-omap2/omap-hotplug.c | 79 +
> arch/arm/mach-omap2/omap-iommu.c | 2 +-
> arch/arm/mach-omap2/omap-smp.c | 3 +-
> arch/arm/mach-omap2/omap44xx-smc.S | 25 +
> arch/arm/mach-omap2/omap_hwmod.c | 106 +-
> arch/arm/mach-omap2/omap_hwmod_2420_data.c | 79 +-
> arch/arm/mach-omap2/omap_hwmod_2430_data.c | 81 +-
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 92 +-
> arch/arm/mach-omap2/omap_hwmod_common_data.c | 3 +
> arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 +
> arch/arm/mach-omap2/pm.c | 84 +
> arch/arm/mach-omap2/pm24xx.c | 1 -
> arch/arm/mach-omap2/pm34xx.c | 7 +-
> arch/arm/mach-omap2/pm44xx.c | 135 +
> arch/arm/mach-omap2/powerdomain.c | 1 +
> arch/arm/mach-omap2/powerdomains34xx.h | 12 +-
> arch/arm/mach-omap2/serial.c | 80 +-
> arch/arm/mach-omap2/usb-ehci.c | 1 -
> arch/arm/mach-omap2/usb-fs.c | 359 +
> arch/arm/mach-omap2/usb-musb.c | 1 -
> arch/arm/mach-omap2/usb-tusb6010.c | 14 +-
> arch/arm/mach-orion5x/Kconfig | 1 +
> arch/arm/mach-orion5x/dns323-setup.c | 370 +-
> arch/arm/mach-orion5x/include/mach/system.h | 2 +
> arch/arm/mach-pxa/cm-x2xx-pci.c | 4 +-
> arch/arm/mach-pxa/corgi.c | 1 -
> arch/arm/mach-pxa/eseries.c | 1 -
> arch/arm/mach-pxa/generic.h | 3 +-
> arch/arm/mach-pxa/include/mach/memory.h | 19 +-
> arch/arm/mach-pxa/palmt5.c | 7 +
> arch/arm/mach-pxa/palmtreo.c | 9 +
> arch/arm/mach-pxa/poodle.c | 1 -
> arch/arm/mach-pxa/spitz.c | 1 -
> arch/arm/mach-pxa/tosa.c | 1 -
> arch/arm/mach-realview/core.c | 40 +-
> arch/arm/mach-realview/include/mach/board-pb1176.h | 1 +
> arch/arm/mach-realview/include/mach/irqs-pb1176.h | 2 +-
> arch/arm/mach-realview/include/mach/memory.h | 7 +-
> arch/arm/mach-realview/realview_eb.c | 30 +-
> arch/arm/mach-realview/realview_pb1176.c | 46 +-
> arch/arm/mach-realview/realview_pb11mp.c | 9 +-
> arch/arm/mach-realview/realview_pba8.c | 9 +-
> arch/arm/mach-realview/realview_pbx.c | 9 +-
> arch/arm/mach-s3c2410/mach-h1940.c | 9 +
> arch/arm/mach-s3c2412/mach-smdk2413.c | 1 -
> arch/arm/mach-s3c2412/mach-vstms.c | 1 -
> arch/arm/mach-s3c2440/mach-rx1950.c | 9 +
> arch/arm/mach-s3c2440/mach-rx3715.c | 9 +
> arch/arm/mach-sa1100/generic.h | 3 +-
> arch/arm/mach-sa1100/include/mach/memory.h | 6 +-
> arch/arm/mach-shark/include/mach/memory.h | 7 +-
> arch/arm/mach-shmobile/Kconfig | 12 +
> arch/arm/mach-shmobile/include/mach/irqs.h | 1 -
> arch/arm/mach-spear3xx/clock.c | 3 +
> arch/arm/mach-spear6xx/clock.c | 3 +
> arch/arm/mach-u300/clock.c | 6 +
> arch/arm/mach-u300/include/mach/memory.h | 8 -
> arch/arm/mach-u300/u300.c | 17 +
> arch/arm/mach-ux500/board-mop500.c | 36 +-
> arch/arm/mach-ux500/clock.c | 4 +
> arch/arm/mach-ux500/devices-db8500.c |
 
Old 09-17-2010, 12:28 AM
John Rigby
 
Default linux-linaro pull request

The following changes since commit 692388cf33ee34b3fcd338d2c9cbcc52a08c0bfe:
Leann Ogasawara (1):
UBUNTU: Ubuntu-2.6.35-22.32

are available in the git repository at:

git://git.linaro.org/ubuntu/linux-linaro.git linaro

Amit Kucheria (2):
arm: mxc: utilise usecount field in clock operations
mxc: Fix pad names for imx51

Anand Gadiyar (3):
OMAP3: wait on IDLEST after enabling USBTLL fclk
OMAP3630: Add ES1.1 and ES1.2 detection
omap: 3630: disable TLL SAR on 3630 ES1

Anton Vorontsov (4):
ARM: cns3xxx: Use IO memory accessors everywhere
ARM: cns3xxx: Add support for PCI Express ports
ARM: cns3xxx: Add support for SDHCI controllers
ARM: cns3xxx: Add support for AHCI controllers

Arnaud Patard (1):
[ARM] qnap tsx1x: fix section mismatch

Artem Bityutskiy (1):
omap: device: improve errors handling

Baruch Siach (13):
mxc_nand: add support for platform defined partitions
mx25: add platform code for imx-keypad
mx25pdk: add keypad support
mx25: add watchdog clock
mx25pdk: register watchdog device
mx25: add a comment documenting undocumented IPG clocks
mx27: add support for the CSI device
mx25: add support for the CSI device
mx25: add iomux defines for UART4 on KPP pins
mx25: add PWM4 to iomux
arm/imx/gpio: add spinlock protection
mx2_camera: Add soc_camera support for i.MX25/i.MX27
mx2_camera: fix type of dma buffer virtual address pointer

Benjamin Herrenschmidt (3):
net/phy/marvell: Expose IDs and flags in a .h and add dns323
LEDs setup flag
[ARM] orion5x: Base support for DNS-323 rev C1
[ARM] orion5x: Fix soft-reset for some platforms

Benjamin Zores (1):
[ARM] Kirkwood: update MPP definition.

Benoit Cousson (1):
OMAP2&3: hwmod: Remove _hwmod prefix in name string

Catalin Marinas (18):
ARM: Correct the cpu_architecture() function for ARMv7
smsc911x: Add spinlocks around registers access
kmemleak: Show more information for objects found by alias
kmemleak: Add DocBook style comments to kmemleak.c
kbuild: Warn on selecting symbols with unmet direct dependencies
ARM: Mark CPU_32v6K as depended on CPU_V7
ARM: Add support for the MOVW/MOVT relocations in Thumb-2
ARM: Remove dummy loads from the original relocation address
ARM: Do not compile the Thumb-2 module relocations on an ARM kernel
ARM: Allow lazy cache flushing via PG_arch_1 for highmem pages
ARM: Assume new page cache pages have dirty D-cache
ARM: Introduce __sync_icache_dcache() for VIPT caches
ARM: Use lazy cache flushing on ARMv7 SMP systems
ARM: Remove superfluous flush_kernel_dcache_page()
ARM: Implement phys_mem_access_prot() to avoid attributes aliasing
ARM: Improve the L2 cache performance when PL310 is used
ARM: Remove the domain switching on ARMv6k/v7 CPUs
ARM: VExpress: Set bit 22 in the PL310 (cache controller) AuxCtlr register

Chris Wilson (1):
lib/scatterlist: Hook sg_kmalloc into kmemleak (v2)

Christoph Egger (8):
Replace dead OMAP_MUX_ERRORS with OMAP_MUX_WARNINGS
Removing dead OMAP_IR
Removing dead OMAP_DSP
Removing dead OMAP_STI
Replacing LEDS_OMAP_DEBUG with OMAP_DEBUG_LEDS
Removing dead APM
Removing dead MACH_OMAP_H4_OTG
Removing dead MACH_OMAP2_H4_USB1

Cory Maccarrone (1):
omap1: omap7xx clocks, mux, serial fixes

Daniel Mack (2):
ARM: mx3: pcm037: remove unused variable
ARM: mx3: mx31lilly: pass mc13783 SPI IRQ pin

Dave Martin (9):
perf report: Don't abbreviate file paths relative to the cwd
perf tools: Remove unneeded code for tracking the cwd in perf sessions
perf tools: Factor out buildid reading and make it implicit in dso__load
perf tools: remove extra build-id check factored into dso__load
perf symbols: Improve debug image search when loading symbols
perf events: Fix mmap offset determination
perf symbols: work around incorrect ET_EXEC symbol adjustment
perf symbols: Ignore mapping symbols on ARM
perf symbols: fix symbol offset breakage with separated debug

David Anders (1):
omap4: Add OMAP4 Panda Support

Deepak K (1):
omap2/3/4: serial: errata i202: fix for MDR1 access

Dinh Nguyen (2):
mx5: Add i2c to Freescale MX51 Babbage HW
mx5: Register i2c on Freescale MX51 Babbage HW

Dmitry Eremin-Solenikov (2):
ARM: 6162/1: at91sam9g20ek: add fixed-value regulator for wm8731
ARM: 6163/1: at91sam9g20ek: add fixed-value regulator for wm8731

Dmytro Milinevskyy (1):
[ARM] Marvell OpenRD-Ultimate machine support

Eric Bénard (35):
eukrea_mbimx27-baseboard: fix typo in display name
eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controls
eukrea_mbimx27-baseboard: add timings for DVI output
cpuimx27 and mbimx27: allow fine control of UART4 and SDHC2 usage
mach-cpuimx27: fix QuadUART's IRQ typo in pins'setup
eukrea_mbimx27: fix ADS7846 support
mach-cpuimx27: add USB Host2 and OTG support
mach-cpuimx27: register wdt and w1_master resources
mxcmmc: add card detect through DAT3 possibility
eukrea_mbimx27: use card detect through DAT3 for SDHC1
MX2X: Add Keypad device definition for MX2X arch
eukrea_mbimx27: add support for the keyboard
eukrea_mbimx27: add audio codec
i.MX35: return IPU clock's value for mx3fb
mach-cpuimx27: fix USB_ULPI build warnings
eukrea_mbimx27: fix audio support when SOC is compiled as module
i.MX27: add suspend to RAM support
MX25: put define for OTG base address in right include
plat-mxc/ehci.c: add i.MX25 support
i.MX25: fix get_rate_otg to return the correct value
i.MX25: fix EHCI support
i.MX25: fix USB gadget support
i.MX25: add AUDMUX and SSI support
i.MX25: add cpuimx25 module and its baseboard
i.MX35: add cpuimx35 support and its baseboard
mxcmmc: convert to pm_ops and enable/disable clock
imx25: fix low level debug
imxfb: add pwmr controlled backlight support
eukrea_mbimx27-baseboard: fix compile when CONFIG_SPI_IMX is disabled
i.MX51: handle IRQ for gpio 16..31
iomux-mx51: add 4 pin definitions
mbimxsd baseboards : remove unnecessary include
Fix KConfig warning
eukrea-baseboards: merge includes in one file
i.MX51: add support for cpuimx51 module and its baseboard

Eric Miao (2):
ARM: Remove unused PARAMS_PHYS from arch/arm/boot/compressed
ARM: Auto calculate ZRELADDR and provide option for exceptions

Fabio Estevam (1):
mx31_3ds: Handle USB OTG GPIO Errors

Felipe Contreras (13):
omap: mailbox: trivial cleanups
omap: mailbox: reorganize structures
omap: mailbox: 2420 should be detected at run-time
omap: mailbox: use correct config for omap1
omap: mailbox: update omap1 probing
omap: mailbox: don't export unecessary symbols
omap: mailbox: remove unecessary fields
omap: mailbox: add IRQ names
omap: mailbox: reorganize registering
omap: mailbox: simplify omap_mbox_register()
omap: mailbox: only compile for configured archs
omap: mailbox: standarize on 'omap-mailbox'
omap: mailbox: reorganize headers

Fernando Guzman Lugo (4):
Mailbox: free mailbox interrupt before freeing blk queue
Mailbox: flush pending deferred works before freeing blk queue
Mailbox: Check valid registered callback before calling
Mailbox: disable mailbox interrupt when request queue

Govindraj R (1):
omap3: serial: Add context save and restore for mcr

Grazvydas Ignotas (3):
omap3: pandora: update gpio-keys data
omap3: pandora: add NAND and wifi support
omap: mux: fix multipath gpio handling

Harro Haan (1):
ARM: 5967/1: at91_udc.c use spinlocks instead of local_irq_xxx

Hartley Sweeten (3):
ARM: 6167/1: ep93xx: register backlight driver
ARM: 6168/1: ep93xx: move physmap flash registration into core.c
ARM: 6174/1: ep93xx: clear devcfg bits before setting them

Helge Deller (1):
PARISC: led.c - fix potential stack overflow in led_proc_write()

Hemanth V (1):
OMAP4: Add GPIO LED support for SDP board

Hiroshi DOYU (6):
omap iommu: Introduce iopgd_is_table MACRO
omap iommu: Rename iopte_[p,v]addr -> iopte_page_[p,v]addr
omap iommu: move iommu_disable at fault to the above layer
omap iommu: Make omap-iommu.o built-in
Mailbox: new mutext lock for h/w mailbox configuration
omap mailbox: Set a device in logical mbox instance for traceability

Jarkko Nikula (4):
omap: rx51: Set regulator V28 always on
omap: rx51: Add platform_data for tlv320aic3x with reset gpionumber
omap: rx51: Use REGULATOR_SUPPLY macro when
initializingregulator consumers
omap: rx51: Add supply and data for the tpa6130a2 headphoneamplifier

Jason Baron (1):
kmemleak: Introduce a default off mode for kmemleak

Jason Wang (10):
mx51/iomux: Fix mux mode and input path for two pads
mx51/iomux: add UART and GPIO pad definitions for imx51_3ds board
mxc/iomux: add GPIO bank offset for iomux v3 platforms
mxc: add common debug board for 3-stack platforms
mx31_3ds: revert 3ds debug board relate code
mx51_3ds: Add support for the imx51 3-stack board
mx51: add imx_keypad device definition for mx51 platforms
mx51_3ds: add keypad support on 3ds platform
imx: move gpio init after to irq init
omap: Fix DEBUG_LL uart to access phys addr when MMU isn't enable

John Rigby (36):
omap3 nand: fix missing gpmc_prefetch_reset param
Merge Ubuntu-2.6.35-22.32 into linux-linaro-2.6.35-16Sep2010
LINARO: Add debian.linaro packaging
LINARO: select debian.linaro packaging
LINARO: [Config] Update configs for new upstream
LINARO: Start new release
LINARO: Linaro-2.6.35-1001-5
LINARO: [Config] Fix vexpress config
LINARO: [Config] Add mx51 flavour
LINARO: Start new release
LINARO: [config] Update vexpress config
LINARO: Linaro-2.6.35-1003.7
LINARO: Start new release
LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-19.25 merge
LINARO: [Config] Update configs
LINARO: Bump ABI
LINARO: Linaro-2.6.35-1004.8
LINARO: Start new release
LINARO: Linaro-2.6.35-1004.9
LINARO: Start new release
LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-20.29 merge
LINARO: [Config] Turn on CONFIG_HIGHMEM for vexpress
LINARO: Update Vcs-Git
LINARO: add Recommends uboot-mkimage
LINARO: Bump ABI
LINARO: Linaro-2.6.35.1005.10
LINARO: Start new release
LINARO: igep ethernet fix
LINARO: [Config] Turn on PS2 mouse for vexpress
LINARO: rebase on linux-linaro-2.6.35-16Sep2010 and
Ubuntu-2.6.35-22.32 merge
LINARO: Bump ABI
LINARO: [Config] ignore modules now compiled in
LINARO: [Config] workaround for kernel-wedge error on empty udebs
LINARO: update configs for new SECCOMP patch
LINARO: [CONFIG] set do_tools = true
LINARO: Linaro-2.6.35-1006.11

Kan-Ru Chen (5):
OMAP2: Devkit8000: Enable DVI-D output
OMAP2: Devkit8000: Setup LCD reset
omap: Add new interface omap_get_die_id
omap: Use omap_get_die_id() to get the DIE ids
omap: Devkit8000: Use DIE id to initialize dm9000 MAC address

Kanigeri, Hari (3):
omap iommu: update irq mask to be specific about twl and tlb
omap iommu: add functionality to get TLB miss interrupt
omap iommu: update ducati mmu irq define name

Kevin Hilman (8):
OMAP24xx: CM: fix mask used for checking IDLEST status
OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST
OMAP: hwmod: add non-locking versions of enable and idle functions
OMAP: omap_device: ensure hwmod tracks attached omap_device pointer
OMAP: PM: create omap_devices for MPU, DSP, L3
OMAP: hwmod data: add class for IVA hwmods
OMAP2&3: hwmod: Replace l3 -> l3_main
OMAP3: hwmod data: add data for OMAP3 IVA2

Kevin Wells (11):
ARM: LPC32XX: Initial arch header files
ARM: LPC32XX: Debug and IRQ macros
ARM: LPC32XX: Clock driver
ARM: LPC32XX: GPIO, timer, and IRQ drivers
ARM: LPC32XX: System suspend support
ARM: LPC32XX: Serial support code
ARM: LPC32XX: Misc support functions
ARM: LPC32XX: Phytec 3250 platform support
ARM: LPC32XX: Arch config menu supoport and makefiles
ARM: Add support for the LPC32XX arch
Merge branch 'test' of ../test/linux-2.6-lpc2 into wells/lpc32xx-arch_v2

Kirill A. Shutemov (5):
ARM: 6252/1: Use SIGBUS for unaligned access instead of SIGILL
ARM: 6269/1: Add 'code' parameter for hook_fault_code()
ARM: 6255/1: Workaround infinity loop in handling of translation faults
ARM: 6256/1: Check arch version and modify fsr_info[] depends on
it at runtime
ARM: 6268/1: ARMv6K and ARMv7 use fault statuses 3 and 6 as
Access Flag fault

Leif Lindholm (1):
ARM: Add SWP/SWPB emulation for ARMv7 processors (v5)

Li Zefan (2):
menuconfig: fix to center checklist correctly in a corner case
menuconfig: truncate list items

Linus Torvalds (1):
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

Linus Walleij (17):
ARM: 6153/1: nomadik MTU to use dynamic shift and mult assignment
ARM: 6204/1: Fixups for the RealView PB1176
ARM: 6227/1: PL022 SSP platform data for the RealViews
ARM: 6228/1: PL022 SSP platform data for the Versatile
ARM: 6222/1: add memory types for the TCMs
ARM: 6223/1: support multiple TCM banks
ARM: 6224/1: print TCM whereabouts in init message
ARM: 6215/2: add character LCD platform data for RealView and Versatile
ARM: 6234/1: move SPEAr to use common mult/shift calculation code
ARM: 6159/1: Move IOP to use common mult/shift calculation code
ARM: 6214/2: driver for the character LCD found in ARM refdesigns
ARM: 6235/2: driver for the LEDs found in the later ARM refdesigns
ARM: 6264/1: fix Versatile Express LED oversight
ARM: 6225/1: make TCM allocation static and common for all archs
ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivative
ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivative
ARM: 6278/2: fix regression in RealView after the introduction of pclk

Luotao Fu (2):
pca100: add framebuffer device support and TFT
pca100: clean up GPIO pin multiplexing

Magnus Damm (3):
ARM: 6206/1: CONFIG_FORCE_MAX_ZONEORDER update for SH-Mobile ARM
ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128

Marc Kleine-Budde (5):
mx25: add flexcan address and interrupt definition
mx35: adjust flexcan clock definition
mx35: add flexcan address
imx: dynamically register flexcan devices for mx25 and mx35
pcm043: register flexcan device

Martin Michlmayr (6):
[ARM] Kirkwood: Export GPIO indicating jumper setting of JP1
[ARM] Kirkwood: Fix explanation of MPP45 for QNAP TS41x
[ARM] orion5x: Set links to solid on D-Link DNS-323
[ARM] Kirkwood: Add MPP44 (board ID) on TS-219
[ARM] Kirkwood: Add support for HP t5325 Thin Client
[ARM] Orion: DNS-323 C1 requires phylib

Mathias Nyman (1):
omap: tsl2563 ALS support for Nokia N900

Michael Bohan (1):
arm: mm: Don't free prohibited memmap entries

Michal Marek (1):
ARM: 6328/1: Build with -fno-dwarf2-cfi-asm

Mika Westerberg (6):
ARM: 6116/1: kdump: reserve memory for crashkernel
ARM: 6117/1: kdump: implement crash_setup_regs()
ARM: 6118/1: kdump: implement machine_crash_shutdown()
ARM: 6119/1: kdump: skip indirection page when crashing
ARM: 6120/1: kdump: implement copy_oldmem_page()
ARM: 6122/1: kdump: add support for elfcorehdr parameter

Mikael Pettersson (1):
ARM: 6329/1: wire up sys_accept4() on ARM

Mike Rapoport (2):
omap3: introduce omap3_map_io
OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings

Nicolas Ferre (2):
ARM: 6169/1: AT91: add new at91 chips in at91sam9g45 family
ARM: 6185/1: AT91: PM: dual ram controller support

Nicolas Pitre (22):
[ARM] implement arch_randomize_brk()
[ARM] add address randomization to mmap()
ARM: initial stack protector (-fstack-protector) support
ARM: stack protector: change the canary value per task
[ARM] Kirkwood: fix HP t5325 after commit 6605742f2a
[ARM] Kirkwood: more factorization of the PCIe init code
[ARM] Kirkwood: add missing machine targets to defconfig
Merge commit '7b70c4275f'
Merge remote branch 'catalin/stable-2.6.35'
Merge remote branch 'willd/for-linaro'
Merge commit 'd21872b'
Merge commit 'linaro_merge_100811'; commit 'v2.6.35.2' into
linaro_stable_10.11
Revert "perf symbols: work around incorrect ET_EXEC symbol adjustment"
Merge remote branch 'remotes/willd/perf-tools' into linaro_stable_10.11
ARM: fix ASLR of PIE executables
Merge commit 'v2.6.35.3' into linaro_stable_10.11
Merge commit 'v2.6.35.4' into linaro-2.6.35
ARM: link board specific files after core files
Merge remote branch 'willd/for-linaro-stable' into linaro-2.6.35
ARM: add a vma entry for the user accessible vector page
ARM: plug a race with the alignment trap handler
ARM: SECCOMP support

Nishanth Menon (4):
omap2/3/4: serial: remove initialization sparse warnings
omap2/3/4: serial: kill dev_attr_sleep_timeout sparse warn
omap2/3/4: serial: introduce errata handling
omap2/3: id: fix sparse warning

Ohad Ben-Cohen (6):
omap: zoom2: wlan board muxing
omap: zoom3: wlan board muxing
omap: mailbox: convert rwlocks to spinlock
omap: mailbox cleanup: split MODULE_AUTHOR line
omap: mailbox: remove (un)likely macros from cold paths
omap: mailbox: convert block api to kfifo

Olaf Rempel (1):
[ARM] orion/kirkwood: reset PCIe unit on boot

Paul Walmsley (9):
OMAP: clock: add kerneldoc for structures; move flags closer to structs
OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz
oscillator)
OMAP1: clock: some cleanup
OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module
idle in _setup()
OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods
OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_va
OMAP2+: hwmod/device: update documentation and copyright
OMAP: PM constraints: add return values; add requesting device
param to omap_pm_set_max_dev_wakeup_lat()
OMAP: PM constraints: add omap_pm_set_min_clk_rate()

Pavel Machek (1):
Add GPIO support for HTC Dream.

Rabin Vincent (24):
ARM: 6150/1: gic: implement set_type
ARM: 6147/1: nomadik-gpio: set val in ->direction_output()
ARM: 6148/1: nomadik-gpio: add function to configure pullup/pulldown
ARM: 6149/1: nomadik-gpio: add function to configure sleep mode behaviour
ARM: 6154/1: nomadik-gpio: refactor nmk_gpio_set_mode
ARM: 6155/1: nomadik-gpio: add pin configuration API
ARM: 6156/1: nomadik-gpio: switch to core_initcall
ARM: 6175/1: nomadik-gpio: implement set_wake
ARM: 6176/1: nomadik-gpio: implement to_irq
ARM: 6177/1: nomadik-gpio: fix "ignoring return value" warning
ARM: 6161/1: mop500: add basic pin configuration
ARM: 6160/1: ux500: add DB8500 pin configs
ARM: 6266/1: ux500: add separate irq lists for DB8500 and DB5500
ARM: 6267/1: mop500: add AB8500 interrupt support
ARM: 6237/1: mmci: use sg_miter API to fix multi-page sg handling
ARM: 6238/1: mmci: fix multi block transfers
ARM: 6239/1: mmci: let core poll for card detection
ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
ARM: 6244/1: mmci: add variant data and default MCICLOCK support
ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
ARM: 6287/1: ftrace: clean up mcount assembly indentation
ARM: 6288/1: ftrace: document mcount formats
ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR"

Rajendra Nayak (2):
OMAP4: hwmod: Enable omap_device build for OMAP4
omap4: suspend: Add basic system suspend support

Robert Nelson (3):
ARM: OMAP: Beagle: revision detection
ARM: OMAP: Beagle: only Cx boards use pin 23 for write protect
ARM: OMAP: Beagle: no gpio_wp pin connection on xM

Rogerio Pimentel (1):
mx27_3ds: add support for the keypad

Russell King (40):
ARM: Prohibit ioremap() on kernel managed RAM
ARM: Remove support for LinkUp Systems L7200 SDP.
Merge git://git.linaro.org/nico/arm_security into devel-stable
ARM: Precalculate vmalloc_min
ARM: Remove DISCONTIGMEM support
ARM: Remove 'node' argument form arch_adjust_zones()
ARM: Move platform memory reservations out of generic code
ARM: OMAP: Cleanup OMAP FB SDRAM reservation
ARM: OMAP: Convert to use ->reserve method to reserve boot time memory
ARM: early_alloc()
Merge branch 'l7200' into devel
Merge git://git.kernel.org/.../nico/orion into devel-stable
ARM: AMBA: Add pclk definition for platforms using primecells
Merge branch 'master' of
git://git.infradead.org/users/cbou/linux-cns3xxx into devel-stable
ARM: fix build warning in asm/elf.h
ARM: early_pte_alloc()
ARM: initial LMB trial
ARM: Convert platform reservations to use LMB rather than bootmem
ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMB
ARM: LMB: Convert arm_memory_present() to use LMB memory information
ARM: LMB: convert pfn_valid to use LMB
ARM: Remove unnecessary call to find_limits()
ARM: Versatile: fix section mismatch
Merge branch 'origin' into misc
ARM: use generic ioremap_page_range()
ARM: DMA coherent allocator: align remapped addresses
ARM: Factor out common code from cpu_proc_fin()
ARM: SMP: Always enable clock event broadcast support
ARM: call machine_shutdown() from machine_halt(), etc
ARM: Fix section build warnings for AMBA drivers
Merge branch 'wells/lpc32xx-arch_v2' of
git://git.lpclinux.com/linux-2.6-lpc into devel-stable
Merge branch 'for-rmk' of
git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable
Merge branch 'arm/booting' of
git://git.pengutronix.de/git/ukl/linux-2.6 into devel-stable
ARM: AMBA: Add pclk support to AMBA bus infrastructure
Merge branch 'shmobile' into devel
Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb',
'nomadik', 'nuc', 'pl', 'spear' and 'versatile' into devel
Merge branch 'misc' into devel
Merge branch 'devel-stable' into devel
ARM: Tighten check for allowable CPSR values
ARM: Ensure PTE modifications via dma_alloc_coherent are visible

Ryan Mallon (3):
ARM: 6200/1: AT91: Define NR_BUILTIN_GPIO
ARM: 6209/2: at91: Add support for Bluewater Systems Snapper
9260/9G20 modules
ARM: 6209/3: at91_udc: Add vbus polarity and polling mode

Saeed Bishara (6):
[ARM] Kirkwood: configure NAND mpp's for db88f6281
[ARM] Kirkwood: add support for rev A1 of the 88f6192 and 88f6180 chips.
[ARM] Kirkwood: Add support for 88f6282
[ARM] PCI: add platform private data to pci_sys_data
[ARM] Kirkwood: add support for PCIe1
[ARM] Dove: platform device registration for the sdio interfaces

Samu Onkalo (1):
omap: dma: Support for prefetch in destination synchronizedtransfer

Santosh Shilimkar (3):
omap4: mmc: Fix the regulator resource for MMC2 on 4430sdp
omap4: Add smc API to read AuxCoreBoot0 register
omap4: hotplug: Add basic CPU hotplug support

Sascha Hauer (2):
mxc_nand: Fix OOB handling
mx25: flexcan clock support

Sergio Aguirre (1):
omap3: Unify omap2_set_globals_3[43,6x]x functions

Shubhrajyoti Datta (1):
omap4: Board changes for 4430sdp tmp105 temperature sensor

Simon Guinot (3):
[ARM] Kirkwood: add LaCie Network Space Max v2 support
leds: add LED driver for Network Space v2 LEDs
[ARM] Kirkwood: update LED support for Network Space v2

Steve Sakoman (1):
omap: Overo: Fix support for second ethernet port

Sukumar Ghorai (8):
omap3 gpmc: functionality enhancement
omap3 nand: cleanup virtual address usages
omap3 nand: fix issue in board file to detect nand
omap3 flash: rename board-sdp-flash.c to be use by other boards
omap3: add support for NAND on zoom2 board
omap3: add support for NAND on zoom3 board
omap-3630-sdp : Add support for Flash
omap3: add support for NAND on LDP board

Thomas Weber (10):
OMAP2: Devkit8000: Cleanup for power supplies
OMAP2: Devkit8000: change panel to generic panel
OMAP2: Devkit8000: Remove unneeded VDVI supply
OMAP2: Devkit8000: Remove non existing vsim supply
OMAP2: Devkit8000: Remove en-/disable for tv panel
OMAP2: Devkit8000: Using the REGULATOR_SUPPLY macro
OMAP2: Devkit8000: Using gpio_is_valid macro
OMAP2: Devkit8000: Remove unused omap_board_config
OMAP2: Devkit8000: Fix regulator for power supply
OMAP2: powerdomain: Add break in switch statement

Tim Gardner (5):
UBUNTU: [Config] Find ABI files according to their source package name
UBUNTU: [Config] getabi: Only get armel omap and vexpress
UBUNTU: Bump ABI
UBUNTU: [Config] Changed flavour names from {omap,vexpress} to
linaro-{omap,vexpress}
UBUNTU: Linaro-2.6.35-1002.6

Tony Lindgren (36):
Merge branch 'v2.6.35-rc3-iommu-for-next' of
git://gitorious.org/~doyu/lk/mainline into omap-for-linus
omap: Separate out omap2 FS USB platform init functions
omap: Move omap2 FS USB platform init code into mach-omap2/usb-fs.c
omap: Enable interface clock for omap2 FS USB
omap: Move omap1 USB platform init code into mach-omap1/usb.c
omap: mux: Fix omap_mux_init_gpio for omap24xx
omap: mux: Renumber package defines to make room for older 24xx packages
omap: mux: Allow compiling in new mux code on all mach-omap2 systems
omap: mux: Remove unncessary parens from mux34xx.c
omap: mux: Add data for 2420
omap: mux: Add data for 2430
omap: mux: Select SIP package for H4
omap: mux: Select POP package for Apollon
omap: mux: Select POP package for N8X0
omap: mux: Select POP package for 2430SDP
omap: mux: Make omap2 FS USB code use new mux functions
omap: mux: Do keypad muxing in board-*.c files
omap: mux: Mux Apollon LCD power in board-apollon.c
omap: mux: Mux 2430 USB0HS_STP in board-2430.c
omap: mux: Convert 2420 platform init code to use new mux code
omap: mux: Remove old mux code
ARM: Disable VGA console for ARM in most cases
omap: Use 32KiHZ timer by default
omap: Make omap specific features appear under Kconfig menu
omap2/3/4: Move Kconfig options to mach-omap2/Kconfig
omap2/3/4: Select all omaps and boards by default
omap2/3/4: Add Kconfig option to compile in typical omap features
ARM: 6203/1: Make VFPv3 usable on ARMv6
ARM: 6207/1: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check
for it on V6
omap: Add back UART MDR1 check into uncompress.h
omap2: Fix GPIO numbers and smc91x for 2430sdp
Merge branch 'devel-misc' into omap-for-linus
Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into
omap-for-linus
Merge branch 'devel-map-io' into omap-for-linus
Merge branch 'v2.6.35-omap-mailbox-for-next' of
git://gitorious.org/~doyu/lk/mainline into omap-for-linus
arm: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6

Uwe Kleine-König (68):
ARM: mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its
arch number
ARM: mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its
arch number
ARM: zImage: don't hard code the stack size twice
ARM: zImage: some comments for __armv3_mpu_cache_on
ARM: zImage: __armv3_mpu_cache_flush: respect should-be-zero specification
ARM: zImage: fix comments for cache_on, cache_off and cache_clean_flush
ARM: zImage: annotate debug functions about corrupted registers
ARM: mx1: don't use deprecated symbol names
ARM: mx1/scb9328: fix type of uart1_mxc_exit to make compiler happy
ARM: mx2/mx27_3ds: document alternative names and remove empty header
ARM: imx: remove empty and unused board headers
ARM: mx3/kzm_arm11_01: fold board header in its only user
ARM: mx2/mx21ads: fold board header in its only user
ARM: mx2/mx27ads: fold board header in its only user
ARM: mx3/qong: get rid of nearly empty header
ARM: mx3/mx31_3ds: fold board header in its only user
ARM: mx3/mx31ads: fold board header in its only user
ARM: mxc: grammar fix
ARM: imx: rename mach dir for mx21 and mx27 to mach-imx
ARM: imx/mx1: fold crm_regs.h into its only consumer
ARM: imx: get rid of mxc_gpio_init
ARM: imx: fold serial.c into devices.c
ARM: imx1: rename imx_csi_device to match its .name
ARM: imx1: rename imx_i2c_device to follow a common naming scheme
ARM: imx1: rename imx_uart[12]_device to follow a common naming scheme
ARM: imx: rename mxc_uart_devicex to follow a common naming scheme
ARM: imx: move mx1 support to mach-imx
ARM: imx: Kconfig: use an if block instead of a depend for many symbols
ARM: imx: prepare deprecating ARCH_MX1, MACH_MX2, MACH_MX21 and MACH_MX27
ARM: imx: new Kconfig symbol and feature test macro for DMA on mx1 and mx2
ARM: imx: new helper function imx_add_platform_device
MTD: mxc_nand: make bit fields unsigned to please sparse
ARM: imx: remove paragraphs with old address of the FSF
ARM: mx25: remove paragraphs with old address of the FSF
ARM: mx3: remove paragraphs with old address of the FSF
ARM: mxc91231: remove paragraphs with old address of the FSF
ARM: mxc: remove paragraphs with old address of the FSF
ARM: imx: Change the way nand devices are registered (generic part)
ARM: imx: Change the way nand devices are registered (imx21)
ARM: imx: Change the way nand devices are registered (imx25)
ARM: imx: Change the way nand devices are registered (imx27)
ARM: imx: Change the way nand devices are registered (imx31)
ARM: imx: Change the way nand devices are registered (imx35)
ARM: imx: dynamically register imx-i2c devices (generic part)
ARM: imx: dynamically register imx-i2c devices (imx1)
ARM: imx: dynamically register imx-i2c devices (imx21)
ARM: imx: dynamically register imx-i2c devices (imx25)
ARM: imx: dynamically register imx-i2c devices (imx27)
ARM: imx: dynamically register imx-i2c devices (imx31)
ARM: imx: dynamically register imx-i2c devices (imx35)
ARM: imx: dynamically register spi_imx devices (generic part)
ARM: imx: dynamically register spi_imx devices (imx21)
ARM: imx: dynamically register spi_imx devices (imx25)
ARM: imx: dynamically register spi_imx devices (imx27)
ARM: imx: dynamically register spi_imx devices (imx31)
ARM: imx: dynamically register spi_imx devices (imx35)
ARM: imx: dynamically register imx-uart devices (generic part)
ARM: imx: dynamically register imx-uart devices (imx1)
ARM: imx: dynamically register imx-uart devices (imx21)
ARM: imx: dynamically register imx-uart devices (imx25)
ARM: imx: dynamically register imx-uart devices (imx27)
ARM: imx: dynamically register imx-uart devices (imx31)
ARM: imx: dynamically register imx-uart devices (imx35)
ARM: mx3: complement uart init routine with an exit routine
ARM: remove bit-rotten STANDALONE_DEBUG for decompressor
ARM: zImage: don't define unused symbol initrd_phys
ARM: deprecate support for old way to pass kernel parameters
Merge branch 'imx/for-2.6.36' of
git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD

Vincent Sanders (1):
Remove ARM default configurations which duplicate omap3_defconfig

Will Deacon (19):
ARM: 6218/1: Versatile Express: add support for local timers on
CA9X4 daughterboard
ARM: 6198/1: perf probe: Add ARM DWARF register number mappings
ARM: 6199/1: Add kprobe-based event tracer
ARM: 6213/1: atomic64_test: add ARM as supported architecture
Versatile Express: add support for local timers on CA9X4 daughterboard
ARM: Add kprobe-based event tracer
ARM: perf probe: Add ARM DWARF register number mappings
ARM: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a
faulty ASID
ARM: flush_ptrace_access: invalidate all I-caches
ARM: atomic64_test: add ARM as supported architecture
Merge branches 'atomic-fixes', 'misc-patches', 'perf-probe' and
'sw-breakpoint' into for-linaro
Merge branch 'perf-tools' into for-linaro
ARM: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a
faulty ASID
ARM: flush_ptrace_access: invalidate all I-caches
oprofile: don't call arch exit code from init code on failure
ARM: oprofile: fix and simplify init/exit functions
ARM: perf: reword comments relating to perf_event_do_pending
ARM: perf: fix event validation
ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile

Wolfram Sang (1):
pcm037/pcm043/pca100: fix ULPI-related build warnings

eric miao (2):
ARM: 6197/2: preliminary support for sparse IRQ
ARM: 6251/1: Make SPARSE_IRQ a hidden option

stanley.miao (1):
OMAP3: AM3505/3517 do not have IO wakeup capability

wanzongshun (5):
ARM: 6231/1: re-organize the nuc900 lcd arch platform data setting
ARM: 6232/1: add nuc900 keypad arch platform data
ARM: 6249/1: add nuc900 kpi platform_device structure to nuc910_dev
ARM: 6250/1: patch for modifying spi flash configuration
ARM: 6274/1: add global control registers definition header file
for nuc900

Documentation/arm/00-INDEX | 2 +
Documentation/arm/memory.txt | 8 +-
Documentation/arm/swp_emulation | 27 +
Documentation/arm/tcm.txt | 30 +-
arch/arm/Kconfig | 207 +-
arch/arm/Makefile | 16 +-
arch/arm/boot/Makefile | 8 +-
arch/arm/boot/compressed/Makefile | 15 +-
arch/arm/boot/compressed/Makefile.debug | 23 -
arch/arm/boot/compressed/head-l7200.S | 29 -
arch/arm/boot/compressed/head.S | 41 +-
arch/arm/boot/compressed/misc.c | 20 -
arch/arm/common/gic.c | 46 +
arch/arm/common/sa1111.c | 5 +-
arch/arm/configs/am3517_evm_defconfig | 127 -
arch/arm/configs/cm_t35_defconfig | 157 -
arch/arm/configs/devkit8000_defconfig | 184 -
arch/arm/configs/igep0020_defconfig | 179 -
arch/arm/configs/kirkwood_defconfig | 8 +
arch/arm/configs/lusl7200_defconfig | 23 -
arch/arm/configs/omap3_beagle_defconfig | 134 -
arch/arm/configs/omap3_evm_defconfig | 160 -
arch/arm/configs/omap3_pandora_defconfig | 158 -
arch/arm/configs/omap3_stalker_lks_defconfig | 150 -
arch/arm/configs/omap3_touchbook_defconfig | 621 --
arch/arm/configs/omap_2430sdp_defconfig | 136 -
arch/arm/configs/omap_3430sdp_defconfig | 178 -
arch/arm/configs/omap_3630sdp_defconfig | 154 -
arch/arm/configs/omap_apollon_2420_defconfig | 92 -
arch/arm/configs/omap_h4_2420_defconfig | 107 -
arch/arm/configs/omap_ldp_defconfig | 135 -
arch/arm/configs/omap_zoom2_defconfig | 143 -
arch/arm/configs/omap_zoom3_defconfig | 155 -
arch/arm/configs/overo_defconfig | 275 -
arch/arm/configs/rx51_defconfig | 222 -
arch/arm/include/asm/assembler.h | 13 +-
arch/arm/include/asm/cacheflush.h | 9 +-
arch/arm/include/asm/domain.h | 31 +-
arch/arm/include/asm/elf.h | 7 +
arch/arm/include/asm/futex.h | 9 +-
arch/arm/include/asm/hwcap.h | 1 +
arch/arm/include/asm/irq.h | 2 +
arch/arm/include/asm/kexec.h | 22 +-
arch/arm/include/asm/mach/arch.h | 2 +
arch/arm/include/asm/mach/irq.h | 1 +
arch/arm/include/asm/mach/map.h | 2 +
arch/arm/include/asm/mach/pci.h | 1 +
arch/arm/include/asm/memblock.h | 16 +
arch/arm/include/asm/memory.h | 76 +-
arch/arm/include/asm/mmu_context.h | 29 +-
arch/arm/include/asm/mmzone.h | 30 -
arch/arm/include/asm/perf_event.h | 2 +-
arch/arm/include/asm/pgtable.h | 29 +-
arch/arm/include/asm/ptrace.h | 36 +
arch/arm/include/asm/seccomp.h | 11 +
arch/arm/include/asm/setup.h | 8 +-
arch/arm/include/asm/smp_plat.h | 4 +
arch/arm/include/asm/system.h | 2 +-
arch/arm/include/asm/thread_info.h | 2 +
arch/arm/include/asm/tlbflush.h | 12 +-
arch/arm/include/asm/tls.h | 46 +
arch/arm/include/asm/traps.h | 2 +
arch/arm/include/asm/uaccess.h | 16 +-
arch/arm/include/asm/unistd.h | 1 +
arch/arm/include/asm/vfpmacros.h | 18 +
arch/arm/kernel/Makefile | 6 +-
arch/arm/kernel/calls.S | 1 +
arch/arm/kernel/compat.c | 7 -
arch/arm/kernel/compat.h | 2 -
arch/arm/kernel/crash_dump.c | 60 +
arch/arm/kernel/entry-armv.S | 29 +-
arch/arm/kernel/entry-common.S | 143 +-
arch/arm/kernel/fiq.c | 5 +
arch/arm/kernel/irq.c | 41 +-
arch/arm/kernel/machine_kexec.c | 14 +-
arch/arm/kernel/module.c | 34 +
arch/arm/kernel/perf_event.c | 12 +-
arch/arm/kernel/process.c | 50 +-
arch/arm/kernel/ptrace.c | 96 +
arch/arm/kernel/relocate_kernel.S | 6 +
arch/arm/kernel/setup.c | 113 +-
arch/arm/kernel/smp.c | 17 +-
arch/arm/kernel/smp_twd.c | 3 +-
arch/arm/kernel/swp_emulate.c | 260 +
arch/arm/kernel/tcm.c | 118 +-
arch/arm/kernel/traps.c | 55 +-
arch/arm/lib/Makefile | 1 -
arch/arm/lib/getuser.S | 13 +-
arch/arm/lib/putuser.S | 29 +-
arch/arm/lib/uaccess.S | 83 +-
arch/arm/mach-aaec2000/include/mach/memory.h | 10 -
arch/arm/mach-at91/Kconfig | 11 +
arch/arm/mach-at91/Makefile | 3 +
arch/arm/mach-at91/at91sam9g45.c | 11 +
arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 45 +
arch/arm/mach-at91/board-sam9g20ek.c | 45 +
arch/arm/mach-at91/board-snapper9260.c | 189 +
arch/arm/mach-at91/include/mach/at91cap9.h | 2 +-
arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h | 22 +-
arch/arm/mach-at91/include/mach/at91sam9260.h | 2 +-
arch/arm/mach-at91/include/mach/at91sam9261.h | 2 +-
arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 130 +
arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 23 +-
arch/arm/mach-at91/include/mach/at91sam9rl.h | 2 +-
arch/arm/mach-at91/include/mach/board.h | 2 +
arch/arm/mach-at91/include/mach/cpu.h | 10 +
arch/arm/mach-at91/include/mach/gpio.h | 1 +
arch/arm/mach-at91/pm.h | 49 +-
arch/arm/mach-at91/pm_slowclock.S | 74 +-
arch/arm/mach-bcmring/core.c | 23 +-
arch/arm/mach-clps711x/Kconfig | 1 -
arch/arm/mach-clps711x/clep7312.c | 1 -
arch/arm/mach-clps711x/edb7211-arch.c | 10 +-
arch/arm/mach-clps711x/fortunet.c | 1 -
arch/arm/mach-clps711x/include/mach/memory.h | 2 -
arch/arm/mach-cns3xxx/Makefile | 3 +-
arch/arm/mach-cns3xxx/cns3420vb.c | 4 +
arch/arm/mach-cns3xxx/devices.c | 111 +
arch/arm/mach-cns3xxx/devices.h | 20 +
arch/arm/mach-cns3xxx/include/mach/cns3xxx.h | 91 +-
arch/arm/mach-cns3xxx/pcie.c | 389 +
arch/arm/mach-cns3xxx/pm.c | 31 +-
arch/arm/mach-davinci/include/mach/memory.h | 9 +-
arch/arm/mach-dove/common.c | 61 +
arch/arm/mach-dove/common.h | 2 +
arch/arm/mach-dove/dove-db-setup.c | 2 +
arch/arm/mach-ep93xx/adssphere.c | 24 +-
arch/arm/mach-ep93xx/clock.c | 2 +-
arch/arm/mach-ep93xx/core.c | 46 +-
arch/arm/mach-ep93xx/edb93xx.c | 31 +-
arch/arm/mach-ep93xx/gesbc9312.c | 24 +-
arch/arm/mach-ep93xx/include/mach/platform.h | 3 +
arch/arm/mach-ep93xx/micro9.c | 37 +-
arch/arm/mach-ep93xx/simone.c | 24 +-
arch/arm/mach-ep93xx/ts72xx.c | 27 +-
arch/arm/mach-imx/Kconfig | 193 +
arch/arm/{mach-mx2 => mach-imx}/Makefile | 18 +-
arch/arm/{mach-mx2 => mach-imx}/Makefile.boot | 4 +
.../{mach-mx1/clock.c => mach-imx/clock-imx1.c} | 50 +-
.../clock_imx21.c => mach-imx/clock-imx21.c} | 0
.../clock_imx27.c => mach-imx/clock-imx27.c} | 2 +-
.../{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} | 0
arch/arm/mach-imx/devices-imx1.h | 18 +
arch/arm/mach-imx/devices-imx21.h | 30 +
arch/arm/mach-imx/devices-imx27.h | 38 +
arch/arm/{mach-mx2 => mach-imx}/devices.c | 296 +-
arch/arm/{mach-mx2 => mach-imx}/devices.h | 32 +-
.../{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c} | 4 +-
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 392 +
arch/arm/mach-imx/include/mach/dma-mx1-mx2.h | 10 +
.../include/mach/dma-v1.h} | 10 +-
arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c | 122 +-
arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c | 11 +-
arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c | 34 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c | 58 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c | 40 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c | 76 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c | 36 +-
arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c | 114 +-
arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c | 33 +-
arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c | 21 +-
.../arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} | 23 +-
arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c | 5 +-
arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c | 5 +-
.../ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c} | 0
.../mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} | 0
arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c | 0
arch/arm/mach-imx/pm-imx27.c | 46 +
arch/arm/mach-integrator/common.h | 1 +
arch/arm/mach-integrator/core.c | 19 +-
arch/arm/mach-integrator/integrator_ap.c | 3 +
arch/arm/mach-integrator/integrator_cp.c | 3 +
arch/arm/mach-integrator/pci_v3.c | 8 +-
arch/arm/mach-iop13xx/include/mach/memory.h | 2 -
arch/arm/mach-iop13xx/pci.c | 2 +-
arch/arm/mach-ixp2000/pci.c | 2 +-
arch/arm/mach-ixp23xx/pci.c | 2 +-
arch/arm/mach-ixp4xx/common-pci.c | 7 +-
arch/arm/mach-ixp4xx/include/mach/memory.h | 6 +-
arch/arm/mach-kirkwood/Kconfig | 19 +
arch/arm/mach-kirkwood/Makefile | 2 +
arch/arm/mach-kirkwood/addr-map.c | 10 +-
arch/arm/mach-kirkwood/common.c | 38 +-
arch/arm/mach-kirkwood/common.h | 5 +-
arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 18 +-
arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 3 +-
arch/arm/mach-kirkwood/include/mach/irqs.h | 1 +
arch/arm/mach-kirkwood/include/mach/kirkwood.h | 39 +-
arch/arm/mach-kirkwood/include/mach/leds-ns2.h | 26 +
arch/arm/mach-kirkwood/mpp.c | 3 +-
arch/arm/mach-kirkwood/mpp.h | 596 +-
arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c | 2 +-
arch/arm/mach-kirkwood/netspace_v2-setup.c | 104 +-
arch/arm/mach-kirkwood/netxbig_v2-setup.c | 32 +-
arch/arm/mach-kirkwood/openrd-setup.c | 29 +-
arch/arm/mach-kirkwood/pcie.c | 174 +-
arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 2 +-
arch/arm/mach-kirkwood/rd88f6281-setup.c | 2 +-
arch/arm/mach-kirkwood/t5325-setup.c | 194 +
arch/arm/mach-kirkwood/ts219-setup.c | 11 +-
arch/arm/mach-kirkwood/ts41x-setup.c | 39 +-
arch/arm/mach-ks8695/pci.c | 4 +-
arch/arm/mach-l7200/Makefile | 11 -
arch/arm/mach-l7200/Makefile.boot | 2 -
arch/arm/mach-l7200/core.c | 100 -
arch/arm/mach-l7200/include/mach/aux_reg.h | 28 -
arch/arm/mach-l7200/include/mach/debug-macro.S | 40 -
arch/arm/mach-l7200/include/mach/entry-macro.S | 35 -
arch/arm/mach-l7200/include/mach/gp_timers.h | 42 -
arch/arm/mach-l7200/include/mach/gpio.h | 105 -
arch/arm/mach-l7200/include/mach/hardware.h | 57 -
arch/arm/mach-l7200/include/mach/io.h | 21 -
arch/arm/mach-l7200/include/mach/irqs.h | 56 -
arch/arm/mach-l7200/include/mach/memory.h | 26 -
arch/arm/mach-l7200/include/mach/pmpcon.h | 46 -
arch/arm/mach-l7200/include/mach/pmu.h | 125 -
arch/arm/mach-l7200/include/mach/serial.h | 37 -
arch/arm/mach-l7200/include/mach/serial_l7200.h | 101 -
arch/arm/mach-l7200/include/mach/sib.h | 119 -
arch/arm/mach-l7200/include/mach/sys-clock.h | 67 -
arch/arm/mach-l7200/include/mach/system.h | 29 -
arch/arm/mach-l7200/include/mach/time.h | 73 -
arch/arm/mach-l7200/include/mach/timex.h | 20 -
arch/arm/mach-l7200/include/mach/uncompress.h | 39 -
arch/arm/mach-l7200/include/mach/vmalloc.h | 4 -
arch/arm/mach-lh7a40x/include/mach/memory.h | 44 -
arch/arm/mach-lpc32xx/Kconfig | 33 +
arch/arm/mach-lpc32xx/Makefile | 8 +
arch/arm/mach-lpc32xx/Makefile.boot | 4 +
arch/arm/mach-lpc32xx/clock.c | 1137 +++
arch/arm/mach-lpc32xx/clock.h | 38 +
arch/arm/mach-lpc32xx/common.c | 271 +
arch/arm/mach-lpc32xx/common.h | 73 +
arch/arm/mach-lpc32xx/gpiolib.c | 446 ++
.../include/mach/clkdev.h} | 19 +-
.../include/mach/debug-macro.S} | 25 +-
arch/arm/mach-lpc32xx/include/mach/entry-macro.S | 47 +
arch/arm/mach-lpc32xx/include/mach/gpio.h | 74 +
arch/arm/mach-lpc32xx/include/mach/hardware.h | 34 +
arch/arm/mach-lpc32xx/include/mach/i2c.h | 63 +
.../include/mach/io.h} | 21 +-
arch/arm/mach-lpc32xx/include/mach/irqs.h | 117 +
.../include/mach/memory.h} | 21 +-
arch/arm/mach-lpc32xx/include/mach/platform.h | 694 ++
arch/arm/mach-lpc32xx/include/mach/system.h | 52 +
.../include/mach/timex.h} | 22 +-
arch/arm/mach-lpc32xx/include/mach/uncompress.h | 60 +
.../include/mach/vmalloc.h} | 18 +-
arch/arm/mach-lpc32xx/irq.c | 432 +
arch/arm/mach-lpc32xx/phy3250.c | 397 +
arch/arm/mach-lpc32xx/pm.c | 146 +
arch/arm/mach-lpc32xx/serial.c | 190 +
arch/arm/mach-lpc32xx/suspend.S | 151 +
arch/arm/mach-lpc32xx/timer.c | 182 +
arch/arm/mach-msm/Makefile | 2 +-
arch/arm/mach-msm/board-trout-gpio.c | 112 +
arch/arm/mach-msm/board-trout.c | 1 -
arch/arm/mach-msm/board-trout.h | 157 +
arch/arm/mach-msm/include/mach/gpio.h | 7 +
arch/arm/mach-mx1/Kconfig | 19 -
arch/arm/mach-mx1/Makefile | 15 -
arch/arm/mach-mx1/Makefile.boot | 4 -
arch/arm/mach-mx1/crm_regs.h | 55 -
arch/arm/mach-mx1/devices.c | 242 -
arch/arm/mach-mx1/devices.h | 7 -
arch/arm/mach-mx2/Kconfig | 116 -
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 249 -
arch/arm/mach-mx2/serial.c | 141 -
arch/arm/mach-mx25/Kconfig | 23 +
arch/arm/mach-mx25/Makefile | 4 +-
arch/arm/mach-mx25/clock.c | 70 +-
arch/arm/mach-mx25/devices-imx25.h | 43 +
arch/arm/mach-mx25/devices.c | 313 +-
arch/arm/mach-mx25/devices.h | 16 +-
arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c | 260 +
arch/arm/mach-mx25/mach-cpuimx25.c | 173 +
.../mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} | 58 +-
arch/arm/mach-mx25/mm.c | 7 +-
arch/arm/mach-mx3/Kconfig | 53 +
arch/arm/mach-mx3/Makefile | 4 +-
arch/arm/mach-mx3/clock-imx35.c | 6 +-
arch/arm/mach-mx3/devices-imx31.h | 38 +
arch/arm/mach-mx3/devices-imx35.h | 37 +
arch/arm/mach-mx3/devices.c | 247 +-
arch/arm/mach-mx3/devices.h | 13 -
arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c | 263 +
arch/arm/mach-mx3/mach-armadillo5x0.c | 17 +-
arch/arm/mach-mx3/mach-cpuimx35.c | 227 +
arch/arm/mach-mx3/mach-kzm_arm11_01.c | 31 +-
arch/arm/mach-mx3/mach-mx31_3ds.c | 256 +-
arch/arm/mach-mx3/mach-mx31ads.c | 55 +-
arch/arm/mach-mx3/mach-mx31lilly.c | 15 +-
arch/arm/mach-mx3/mach-mx31lite.c | 17 +-
arch/arm/mach-mx3/mach-mx31moboard.c | 50 +-
.../mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} | 16 +-
arch/arm/mach-mx3/mach-pcm037.c | 34 +-
arch/arm/mach-mx3/mach-pcm037_eet.c | 7 +-
arch/arm/mach-mx3/mach-pcm043.c | 31 +-
arch/arm/mach-mx3/mach-qong.c | 16 +-
arch/arm/mach-mx3/mm.c | 7 +-
arch/arm/mach-mx3/mx31lilly-db.c | 14 +-
arch/arm/mach-mx3/mx31lite-db.c | 15 +-
arch/arm/mach-mx3/mx31moboard-devboard.c | 10 +-
arch/arm/mach-mx3/mx31moboard-marxbot.c | 4 -
arch/arm/mach-mx3/mx31moboard-smartbot.c | 11 +-
arch/arm/mach-mx5/Kconfig | 27 +
arch/arm/mach-mx5/Makefile | 4 +-
arch/arm/mach-mx5/board-cpuimx51.c | 293 +
arch/arm/mach-mx5/board-mx51_3ds.c | 164 +
arch/arm/mach-mx5/board-mx51_babbage.c | 28 +-
arch/arm/mach-mx5/clock-mx51.c | 16 +
arch/arm/mach-mx5/devices.c | 83 +-
arch/arm/mach-mx5/devices.h | 4 +
arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 200 +
arch/arm/mach-mx5/mm.c | 3 +
arch/arm/mach-mxc91231/crm_regs.h | 5 -
arch/arm/mach-mxc91231/devices.c | 2 +-
arch/arm/mach-mxc91231/mm.c | 8 +-
arch/arm/mach-nomadik/clock.c | 4 +
arch/arm/mach-omap1/Kconfig | 13 +
arch/arm/mach-omap1/Makefile | 3 +
arch/arm/mach-omap1/board-ams-delta.c | 3 +-
arch/arm/mach-omap1/board-fsample.c | 13 +
arch/arm/mach-omap1/board-generic.c | 5 +-
arch/arm/mach-omap1/board-h2.c | 32 +-
arch/arm/mach-omap1/board-h3.c | 16 +-
arch/arm/mach-omap1/board-htcherald.c | 3 +-
arch/arm/mach-omap1/board-innovator.c | 5 +-
arch/arm/mach-omap1/board-nokia770.c | 137 +-
arch/arm/mach-omap1/board-osk.c | 3 +-
arch/arm/mach-omap1/board-palmte.c | 87 +-
arch/arm/mach-omap1/board-palmtt.c | 3 +-
arch/arm/mach-omap1/board-palmz71.c | 16 +-
arch/arm/mach-omap1/board-perseus2.c | 13 +
arch/arm/mach-omap1/board-sx1.c | 5 +-
arch/arm/mach-omap1/board-voiceblue.c | 3 +-
arch/arm/mach-omap1/clock.c | 22 +-
arch/arm/mach-omap1/clock.h | 2 +-
arch/arm/mach-omap1/clock_data.c | 149 +-
arch/arm/mach-omap1/devices.c | 72 -
arch/arm/mach-omap1/include/mach/debug-macro.S | 10 +-
arch/arm/mach-omap1/io.c | 2 -
arch/arm/mach-omap1/mailbox.c | 55 +-
arch/arm/mach-omap1/mcbsp.c | 3 -
arch/arm/mach-omap1/mux.c | 6 +-
arch/arm/mach-omap1/serial.c | 7 +
arch/arm/mach-omap1/usb.c | 530 ++
arch/arm/mach-omap2/Kconfig | 89 +
arch/arm/mach-omap2/Makefile | 23 +-
arch/arm/mach-omap2/board-2430sdp.c | 24 +-
arch/arm/mach-omap2/board-3430sdp.c | 25 +-
arch/arm/mach-omap2/board-3630sdp.c | 130 +-
arch/arm/mach-omap2/board-4430sdp.c | 71 +-
arch/arm/mach-omap2/board-am3517evm.c | 9 +-
arch/arm/mach-omap2/board-apollon.c | 31 +-
arch/arm/mach-omap2/board-cm-t35.c | 29 +-
arch/arm/mach-omap2/board-devkit8000.c | 170 +-
.../{board-sdp-flash.c => board-flash.c} | 93 +-
arch/arm/mach-omap2/board-generic.c | 2 +-
arch/arm/mach-omap2/board-h4.c | 61 +-
arch/arm/mach-omap2/board-igep0020.c | 9 +-
arch/arm/mach-omap2/board-ldp.c | 44 +-
arch/arm/mach-omap2/board-n8x0.c | 14 +
arch/arm/mach-omap2/board-omap3beagle.c | 17 +-
arch/arm/mach-omap2/board-omap3evm.c | 9 +-
arch/arm/mach-omap2/board-omap3pandora.c | 157 +-
arch/arm/mach-omap2/board-omap3stalker.c | 8 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 34 +-
arch/arm/mach-omap2/board-omap4panda.c | 304 +
arch/arm/mach-omap2/board-overo.c | 75 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 78 +-
arch/arm/mach-omap2/board-rx51-video.c | 1 -
arch/arm/mach-omap2/board-rx51.c | 3 +-
arch/arm/mach-omap2/board-zoom2.c | 65 +-
arch/arm/mach-omap2/board-zoom3.c | 65 +-
arch/arm/mach-omap2/clock3xxx_data.c | 7 +-
arch/arm/mach-omap2/cm.c | 6 +-
arch/arm/mach-omap2/devices.c | 88 +-
arch/arm/mach-omap2/gpmc-nand.c | 37 +-
arch/arm/mach-omap2/gpmc.c | 284 +-
arch/arm/mach-omap2/i2c.c | 27 +-
arch/arm/mach-omap2/id.c | 64 +-
.../include/mach/{board-sdp.h => board-flash.h} | 9 +-
arch/arm/mach-omap2/include/mach/board-zoom.h | 6 +
arch/arm/mach-omap2/include/mach/debug-macro.S | 29 +-
arch/arm/mach-omap2/include/mach/id.h | 22 +
arch/arm/mach-omap2/include/mach/omap4-common.h | 7 +
arch/arm/mach-omap2/io.c | 16 +-
arch/arm/mach-omap2/iommu2.c | 44 +-
arch/arm/mach-omap2/mailbox.c | 182 +-
arch/arm/mach-omap2/mcbsp.c | 13 +-
arch/arm/mach-omap2/mux.c | 338 +-
arch/arm/mach-omap2/mux.h | 28 +-
arch/arm/mach-omap2/mux2420.c | 688 ++
arch/arm/mach-omap2/mux2420.h | 282 +
arch/arm/mach-omap2/mux2430.c | 791 ++
arch/arm/mach-omap2/mux2430.h | 370 +
arch/arm/mach-omap2/mux34xx.c | 8 +-
arch/arm/mach-omap2/omap-headsmp.S | 16 -
arch/arm/mach-omap2/omap-hotplug.c | 79 +
arch/arm/mach-omap2/omap-iommu.c | 2 +-
arch/arm/mach-omap2/omap-smp.c | 3 +-
arch/arm/mach-omap2/omap44xx-smc.S | 25 +
arch/arm/mach-omap2/omap_hwmod.c | 106 +-
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 79 +-
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 81 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 92 +-
arch/arm/mach-omap2/omap_hwmod_common_data.c | 3 +
arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 +
arch/arm/mach-omap2/pm.c | 84 +
arch/arm/mach-omap2/pm24xx.c | 1 -
arch/arm/mach-omap2/pm34xx.c | 7 +-
arch/arm/mach-omap2/pm44xx.c | 135 +
arch/arm/mach-omap2/powerdomain.c | 1 +
arch/arm/mach-omap2/powerdomains34xx.h | 12 +-
arch/arm/mach-omap2/serial.c | 80 +-
arch/arm/mach-omap2/usb-ehci.c | 1 -
arch/arm/mach-omap2/usb-fs.c | 359 +
arch/arm/mach-omap2/usb-musb.c | 1 -
arch/arm/mach-omap2/usb-tusb6010.c | 14 +-
arch/arm/mach-orion5x/Kconfig | 1 +
arch/arm/mach-orion5x/dns323-setup.c | 370 +-
arch/arm/mach-orion5x/include/mach/system.h | 2 +
arch/arm/mach-pxa/cm-x2xx-pci.c | 4 +-
arch/arm/mach-pxa/corgi.c | 1 -
arch/arm/mach-pxa/eseries.c | 1 -
arch/arm/mach-pxa/generic.h | 3 +-
arch/arm/mach-pxa/include/mach/memory.h | 19 +-
arch/arm/mach-pxa/palmt5.c | 7 +
arch/arm/mach-pxa/palmtreo.c | 9 +
arch/arm/mach-pxa/poodle.c | 1 -
arch/arm/mach-pxa/spitz.c | 1 -
arch/arm/mach-pxa/tosa.c | 1 -
arch/arm/mach-realview/core.c | 40 +-
arch/arm/mach-realview/include/mach/board-pb1176.h | 1 +
arch/arm/mach-realview/include/mach/irqs-pb1176.h | 2 +-
arch/arm/mach-realview/include/mach/memory.h | 7 +-
arch/arm/mach-realview/realview_eb.c | 30 +-
arch/arm/mach-realview/realview_pb1176.c | 46 +-
arch/arm/mach-realview/realview_pb11mp.c | 9 +-
arch/arm/mach-realview/realview_pba8.c | 9 +-
arch/arm/mach-realview/realview_pbx.c | 9 +-
arch/arm/mach-s3c2410/mach-h1940.c | 9 +
arch/arm/mach-s3c2412/mach-smdk2413.c | 1 -
arch/arm/mach-s3c2412/mach-vstms.c | 1 -
arch/arm/mach-s3c2440/mach-rx1950.c | 9 +
arch/arm/mach-s3c2440/mach-rx3715.c | 9 +
arch/arm/mach-sa1100/generic.h | 3 +-
arch/arm/mach-sa1100/include/mach/memory.h | 6 +-
arch/arm/mach-shark/include/mach/memory.h | 7 +-
arch/arm/mach-shmobile/Kconfig | 12 +
arch/arm/mach-shmobile/include/mach/irqs.h | 1 -
arch/arm/mach-spear3xx/clock.c | 3 +
arch/arm/mach-spear6xx/clock.c | 3 +
arch/arm/mach-u300/clock.c | 6 +
arch/arm/mach-u300/include/mach/memory.h | 8 -
arch/arm/mach-u300/u300.c | 17 +
arch/arm/mach-ux500/board-mop500.c | 36 +-
arch/arm/mach-ux500/clock.c | 4 +
arch/arm/mach-ux500/devices-db8500.c | 14 +-
.../mach-ux500/include/mach/irqs-board-mop500.h | 23 +
arch/arm/mach-ux500/include/mach/irqs-db5500.h | 85 +
arch/arm/mach-ux500/include/mach/irqs-db8500.h | 96 +
arch/arm/mach-ux500/include/mach/irqs.h | 22 +-
arch/arm/mach-ux500/pins-db8500.h | 742 ++
arch/arm/mach-versatile/core.c | 35 +-
arch/arm/mach-versatile/pci.c | 2 +-
arch/arm/mach-vexpress/ct-ca9x4.c | 10 +-
arch/arm/mach-vexpress/include/mach/ct-ca9x4.h | 1 +
arch/arm/mach-vexpress/v2m.c | 7 +-
arch/arm/mach-w90x900/dev.c | 96 +-
arch/arm/mach-w90x900/include/mach/regs-gcr.h | 39 +
arch/arm/mach-w90x900/mach-nuc950evb.c | 44 -
arch/arm/mach-w90x900/nuc910.c | 2 +
arch/arm/mach-w90x900/nuc950.c | 2 -
arch/arm/mm/Kconfig | 56 +-
arch/arm/mm/Makefile | 1 -
arch/arm/mm/alignment.c | 35 +-
arch/arm/mm/cache-l2x0.c | 15 +-
arch/arm/mm/copypage-v4mc.c | 2 +-
arch/arm/mm/copypage-v6.c | 2 +-
arch/arm/mm/copypage-xscale.c | 2 +-
arch/arm/mm/discontig.c | 45 -
arch/arm/mm/dma-mapping.c | 23 +-
arch/arm/mm/fault-armv.c | 8 +-
arch/arm/mm/fault.c | 56 +-
arch/arm/mm/flush.c | 50 +-
arch/arm/mm/init.c | 424 +-
arch/arm/mm/ioremap.c | 80 +-
arch/arm/mm/mm.h | 4 +-
arch/arm/mm/mmu.c | 192 +-
arch/arm/mm/nommu.c | 22 +-
arch/arm/mm/proc-arm1020.S | 6 +-
arch/arm/mm/proc-arm1020e.S | 6 +-
arch/arm/mm/proc-arm1022.S | 6 +-
arch/arm/mm/proc-arm1026.S | 6 +-
arch/arm/mm/proc-arm6_7.S | 2 -
arch/arm/mm/proc-arm720.S | 6 +-
arch/arm/mm/proc-arm740.S | 6 +-
arch/arm/mm/proc-arm7tdmi.S | 2 -
arch/arm/mm/proc-arm920.S | 10 +-
arch/arm/mm/proc-arm922.S
 
Old 09-17-2010, 02:05 AM
Tim Gardner
 
Default linux-linaro pull request

On 09/16/2010 06:28 PM, John Rigby wrote:
> The following changes since commit 692388cf33ee34b3fcd338d2c9cbcc52a08c0bfe:
> Leann Ogasawara (1):
> UBUNTU: Ubuntu-2.6.35-22.32
>
> are available in the git repository at:
>
> git://git.linaro.org/ubuntu/linux-linaro.git linaro
>

Pulled, but this commit is an egregious hack:

LINARO: [Config] workaround for kernel-wedge error on empty udebs

You're better off removing udebs from debian.linaro/d-i/package-list
then you are short cutting the copy and test step.

rtg
--
Tim Gardner tim.gardner@canonical.com

--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
 
Old 09-17-2010, 02:44 AM
John Rigby
 
Default linux-linaro pull request

On Thu, Sep 16, 2010 at 8:05 PM, Tim Gardner <tim.gardner@canonical.com> wrote:
> On 09/16/2010 06:28 PM, John Rigby wrote:
>>
>> The following changes since commit
>> 692388cf33ee34b3fcd338d2c9cbcc52a08c0bfe:
>> * Leann Ogasawara (1):
>> * * * * UBUNTU: Ubuntu-2.6.35-22.32
>>
>> are available in the git repository at:
>>
>> * git://git.linaro.org/ubuntu/linux-linaro.git linaro
>>
>
> Pulled, but this commit is an egregious hack:
>
> LINARO: [Config] workaround for kernel-wedge error on empty udebs
>
> You're better off removing udebs from debian.linaro/d-i/package-list then
> you are short cutting the copy and test step.
>
> rtg
> --
> Tim Gardner tim.gardner@canonical.com
>

Yes, I agree, I was running out of time and didn't know the right way
to fix it. Now I do.

Thanks,
John

--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
 
Old 09-17-2010, 06:28 AM
Christian Robottom Reis
 
Default linux-linaro pull request

On Thu, Sep 16, 2010 at 06:28:03PM -0600, John Rigby wrote:
> LINARO: [Config] Turn on CONFIG_HIGHMEM for vexpress

Hello there,

Question: in general, why would we use CONFIG_HIGHMEM instead of
changing the kernel/userspace memory split?
--
Christian Robottom Reis | [+55 16] 3376 0125 | http://launchpad.net/~kiko
Canonical Ltd. | [+55 16] 9112 6430 | http://async.com.br/~kiko

--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
 
Old 09-17-2010, 03:39 PM
Matt Waddel
 
Default linux-linaro pull request

Hi Kiko,

On 09/17/2010 12:28 AM, Christian Robottom Reis wrote:
> On Thu, Sep 16, 2010 at 06:28:03PM -0600, John Rigby wrote:
>> LINARO: [Config] Turn on CONFIG_HIGHMEM for vexpress
>
> Hello there,
>
> Question: in general, why would we use CONFIG_HIGHMEM instead of
> changing the kernel/userspace memory split?

I didn't notice much of a difference either way, so I just
picked one. I didn't do any real testing or benchmarking,
so if there a better reason to choose the kernel/userspace
split option (CONFIG_VMSPLIT_2G=y) I'll put in a request
to change it.

--Matt

--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
 

Thread Tools




All times are GMT. The time now is 03:10 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org