Abhijeet Dharmapurikar (4):
driver: fix msm_rmnet driver problem with dropping packets
driver: interrupt based flow control in msm_rmnet driver
msm_rmnet: set start of transmission time
msm_rmnet: kill the tasklet when the network device is stopped
Alex Wong (1):
msm: audio: 8x50: Add dal interface version check in audio driver
Anirudh Ghayal (2):
msm: Add support for LID open/close detection on ST1.5
defconfig: Enable gpio_keys driver for Lid Sensor on ST1.5
Annamaria Pyreddy (7):
msm_q6video: remove the video decoder and encoder drivers
Enable the config option for qdsp6 compilation.
msm: qdsp6: Implement new Scorpion/QDSP6 interface
msm_q6venc: data structure changes for new encoder interface 2.0
msm_q6video: remove the video encoder unused header file
Revert "msm: qdsp6: Move to the old Vdec Interface Version 2.0"
Revert "msm_q6venc: Update to the latest driver."
Anshul Gupta (1):
Kbuild: export msm headers to userspace
Aparna Mallavarapu (3):
msmsdcc: Fix to prevent a compilation issue when DEBUG_FS is disabled.
sdio: Activate high speed clock after SDIO reset.
sdio: Claim and release host in the sdio_reset_comm API
Ashish Bijlani (2):
msm_kgsl: Add support for caching GEM objects
msm_kgsl: Add support for caching GEM objects
Ashraya Arya (1):
msm: audio: 8x50: New Voice call interface for Audio driver
Ashwin Chaugule (5):
defconfig: Removed unnecessary options from ST1 defconfig
defconfig: Removed unnecessary options from ST1.5 defconfig
defconfig: Enable CPU frequency scaling for ST1
defconfig: Perf defconfigs for ST1 and ST1.5
PMIC: Add driver for TPS65023
Brian Swetland (6):
[ARM] msm: qsd8k: Device Access Layer (DAL) RPC
msm: smd: provide atomic channel writes
[ARM] msm: driver for rmnet virtual ethernet interface
qsd8k: audio: tracing, and stuck dsp panic code
qsd8k: dal: add tracing capabilities to DAL channels
qsd8k: audio: enhance stuck dal debugging
Bryan Huntsman (1):
Revert "msm_kgsl: Add support for caching GEM objects"
Chiranjeevi Velempati (9):
USB: gadget: Add chrome composite gadget
defconfig: Enable diag on gadget
usb: gadget: use clk_reset API's for resetting hardware blocks
defconfig: Enable usb host CDC ACM and ECM support
msm: msm72k_udc: gadget driver for msm7k
msm: msm72k_udc: gadget driver for msm7k
msm: usb: gadget: misc
defconfig: Enable USB DCD driver
usb: gadget: diag: Fix to send correct pid and serial number
Hanyu Cui (4):
vfp: Handle vfp context preserve/restore during signal
msm: mdp: Add support for asynchronous hardware bliting
defconfig: enable asynchronous hardware bliting
msm_fb: Fix error handling code for asynchronous hardware blit
Iliyan Malchev (1):
[ARM] qsd8k: initialize the spinlock in dal_client
Jin Hong (4):
defconfig: enable DRM on ST1
defconfig: turn off PMEM_GPU0 for ST1 and ST1.5
defconfig: build Quanta keyboard by default for ST 1.x boards
defconfig: enable CONFIG_EFI_PARTITION for ST 1.x boards
Jordan Crouse (9):
pmem: Add range checking to pmem_kapi_free_index_bitmap
msm_kgsl: Add support for double buffered GEM objects
msm_fb: Make the pitch for the framebuffer 32 pixel aligned
msm_fb: Add support for changing the scan-out address
msm_kgsl: Map PMEM GEM objects in the GPU MMU
Revert "msm_kgsl: Map PMEM GEM objects in the GPU MMU"
msm_kgsl: Fix logic in a macro in the DRM driver
msm_kgsl: Use dmac_flush_range to flush cached GEM memory
headers: Add msm_kgsl.h to the list of headers to be installed
Kenneth Waters (1):
msm_kgsl: Implement the old version of the KGSL_SHAREDMEM_FROM_PMEM ioctl.
Krishna, Vamsi (11):
msm: usb: gadget: support for ep0 out requests
msm: usb: gadget: Send ACK handshake to CLEAR_FEATURE req for EP0
msm: usb: gadget: STALL support for endpoint
msm: usb: gadget: clear the stall bit on CLEAR FEATURE cmd
msm: usb: gadget: add support for interrupt endpoint type
msm: usb: gadget: support usb protocol SET FEATURE cmd
msm: usb: gadget: support usb protocol GET STATUS cmd
msm: usb: gadget: usb electrical test modes support
msm: usb: gadget: support remote wakeup GET/SET/CLEAR features
msm: usb: gadget: Add support to initiate Remote Wakeup through Sysfs
msm: usb: gadget: Move udc header file to platform folder
Mandeep Singh Baines (2):
MSM: add trackpad driver in st1.5
MSM: add keyboard driver in st1.5
Matt Wagantall (15):
msm: acpuclock-8x50: Select ACPU VDD based on max freq EFUSE data.
msm: remote-spinlock: Return error if DAL remote lock init fails.
msm: smem_log: Check for remote spinlock initialization failures.
msm: clock: Remove unsupported 'usb_phy_clk' from 7x27 and 8x50.
msm: acpuclock: Fix ACPU frequency units.
msm: Move Power Collapse and SWFI ACPU freqs into acpuclock drivers.
msm: acpuclock-8x50: Use PLL0 instead of AXI under all scenarios.
msm: acpuclock: Improve debug messages.
diag: Various fixes for Qualcomm SoC diagnostics driver
Revert "msm: clock: Remove unsupported 'usb_phy_clk' from 7x27 and 8x50."
defconfig: Enable PPP support for ST1 and ST1.5.
msm: acpuclock-8x50: Select ACPU VDD based on max freq EFUSE data.
Revert "msm: acpuclock-8x50: Use PLL0 instead of AXI under all scenarios."
Revert "msm: acpuclock-8x50: Select ACPU VDD based on max freq EFUSE data."
msm: acpuclock-8x50: Use PLL0 instead of AXI under all scenarios.
Matthew Wilson (4):
serial: Add MSM high speed UART driver
defconfig: Enable HSUART module for ST-1 and ST-1.5
Bluetooth: export interfaces for sleep
serial: export interfaces for sleep
Michael K. Edwards (3):
msm: sdcc: ports 1 and 2: Reduce the clock frequency to 40.96MHz
msm: sdcc: ports 1 and 2: Increase clock drive strength to 16MA.
vfp: change vfp context save logging to pr_debug to suppress excess spew
Mike Lockwood (7):
msm_serial_hs: HSUART driver from Qualcomm
msm: usb: gadget: Save and restore otgsc register at h/w reset
msm: usb: gadget: Add check to enable pullup if gadget and VBUS are valid
msm: usb: gadget: Call _pullup function to enable pullup after reset
msm: usb: gadget: Disable pullup when vbus is off
msm: usb: gadget: Set max packet size to 64 for non-bulk endpoints.
msm: usb: gadget: Fix reference after free bug in handle_endpoint()
Murali Nalajala (4):
msm-nand: Add support for msm nand driver.
mtd: Enable MTD tests by default.
msm: ONFI probe fix for MT29F4G08ABC device.
msm: Correct dma memory allocate and free size in probe and remove methods
Naresh Babu Saladi (1):
[ARM] oprofile: Add scorpion support to Oprofile kernel driver
Naveen Ramaraj (1):
pmem: Remove extra IO-remap for In-Kernel PMEM memory
Neil Leeder (3):
msm: Add HDMI support for ST1.5
msm_fb: add SII9022 HDMI driver support
msm: add GPIO IRQ number for ST1, ST1.5 k/b, touchpad
Nick Pelly (5):
msm_serial_hs: Redo hs uart driver for MSM7k
msm: msm_serial_hs: Wakeup on uart1dm irq
msm: msm_serial_hs: Add optional low power wakeup.
msm: msm_serial_hs: Hold wakelock while rx dma in progress.
msm: msm_serial_hs: Disable datamover when clocking off uart.
Peter Lohmann (12):
[ARM] msm: qdsp6: Support Qualcomm's SMD Driver
8x50a: audio: Add audio GPIO for ST1.5.
qdsp6: add audiov2 driver
msm: audio: 8x50: allow either legacy or new audio driver
qdsp6: add audiov2 pcm open routines
alsa: soc: 8k: Add support for qsd audio v1 and v2 devices.
8x50: audio: Fix compile errors in audiov2 driver.
alsa: soc: 8k: Fix build and config options for audiov2 interface.
defconfig: Enable ALSA SOC for ST1.5.
8x50: audio: Enable ST1.5 speaker phone.
alsa: soc: 8k: Initialize the audio device upon ALSA open.
8x50: audio: Enable speaker and mic on ST1.5.
Pfeffer, Zach (1):
msm_rmnet: Fix SMD port names
Philip Elcan (4):
mmc: Add support in board file to enable dummy 52 reads.
mmc: msm_sdcc: Add support in msmsdcc driver for dummy 52 reads.
msm: Add ST1-specific changes for ST TPM device
tpm: Add support for ST ST19NP18 I2C TPM device
Premal Shah (1):
pmem: mark pmem_adsp region as cached
Rajesh Sastrula (3):
msm: qdsp6: Add convenience wrapper for rpc idx 14
msm: qdsp6: Fix pmem leak when application crash
msm: qdsp6: Move to the old Vdec Interface Version 2.0
Sagar Dharia (9):
qup_i2c: Initial implementation of I2C mini-core driver for QUP
qup_i2c: Make sure that READ start and READ size tags are in same FIFO
qup_i2c: Disable QUP interrupts when QUP is not in use.
qup_i2c: Move QUP register initialization to first transfer
qup_i2c: Use DEBUG correctly as a flag and not as a value.
qup_i2c: Use platform specific PCLK, I2C clock name.
qup_i2c: Use platform specific PCLK, I2C clock name.
qup_i2c: Make driver compatible with new QUP I2C core.
qup_i2c: Support reads, writes greater than FIFO-size number of bytes
Sahitya Tummala (1):
mmc: msm_sdcc: reset SDCC in case of data transfer errors
Saravana Kannan (2):
msm: acpuclock-8x50a: Bump up max CPU freq to 1.19 GHz.
msm: clock: Add GRP_PCLK to 8x50A.
Shalabh Jain (1):
diag: Make DIAG char driver static
Sheetal Sahasrabudhe (1):
KSAPI: Fix the global thread and AXI counters
Stephen Boyd (1):
msm: clock: Add clocks for 8x50a
Suren Eda Naarayana Kulothungan (1):
msm: CP register access tool for Read/Write to CP registers
Susan Brownhill (1):
msm_q6venc: Update to the latest driver.
Tim Gardner (3):
UBUNTU: [Config] Updateconfigs after updating to qualcomm-2.6.31.12
UBUNTU: [Config] Disable d-i udeb generation
UBUNTU: Ubuntu-2.6.31-801.3
Trevor Bourget (3):
msm_kgsl: export kgsl_drm header
defconfig: enable SECURE_FILE_CAPABILITIES for st1 and st15
defconfig: use Quanta trackpad by default for st1q variants
Vamsi Krishna (1):
usb: msm_gadget: Interface support with otg
Vincent Kao (1):
msm: usb: reset the PHY before suspend
Wilson, Matt (4):
[ARM] msm: bluetooth: power switch hardware support
bluetooth: Add Bluetooth power driver
bluetooth: remove initial power off for Bluetooth
defconfig: enable Bluetooth power driver for ST-1.0 and ST-1.5
Yunsen Wang (2):
defconfig: Enable Libra WLAN for st1 and st1.5
wireless: libra: SDIO interface module
stevel (1):
msm: usb: gadget: Configure endpoints properly in msm72k_enable
Lucid qcm-msm pull request, update to chromium-2.6.31.12
