Problem when trying to compile ubuntu-kernel from source (via apt-
Hello everybody
I have a strange problem when i tried to compile my own XEN Dom0/DomU
Kernel from source (i used the apt-src kernel sources).
I followed this manual:
https://help.ubuntu.com/community/Kernel/Compile
I created a new flavour called "xen" (see
http://blog.avirtualhome.com/2009/11/03/how-to-compile-a-kernel-for-ubuntu-karmic/)
and patched the kernel-source with the xen-patches (2.6.31-11).After
that, i ran:
debian/rules updateconfigs
and i enabled the new XEN config-attributes only for my flavour
And here is the first of my 2 problems. When i omitted the skipmodule
flag, i got some warnings about missing modules, what exactly does this
mean (are the modules in the kernel config but not in the kernel source
anymore????)?
Then i set the flag, and the compilation went through fine (about 20
minutes) but i got the following error:
WW: Explicitly asked to ignore failures (probably not good)
II: New modules (you've been busy, wipe the poop off your nose)
II: Done
dh_testdir
dh_testroot
dh_clean -k -plinux-image-2.6.31-19-xen
dh_clean -k -plinux-headers-2.6.31-19-xen
dh_clean -k -plinux-image-debug-2.6.31-19-xen
# The main image
# compress_file logic required because not all architectures
# generate a zImage automatically out of the box
install -m644 -D
/root/linux-2.6.31/debian/build/build-xen/arch/x86_64/boot/bzImage
install: cannot stat
`/root/linux-2.6.31/debian/build/build-xen/arch/x86_64/boot/bzImage': No
such file or directory
make: *** [install-xen] Error 1
I have some knowledge about debian/ubuntu package building, but as i
discovered, the kernel rules-file is a bit complicated and i don't know
where the error could be. What i know is that
Can you please help me, because i really need this Xen Dom0/U Kernel for
Ubuntu Karmic (x86_64).
Greets Thomas
--
Thomas Stather, Fraunhofer SIT
Abteilung PSS
Zimmer 64
Rheinstrasse 75, 64295 Darmstadt, Germany
Tel: +49 (0) 6151 86960058
http://www.sit.fraunhofer.de
--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
03-01-2010, 01:12 PM
Tim Gardner
Problem when trying to compile ubuntu-kernel from source (via apt-
Thomas Stather wrote:
> Hello everybody
>
> I have a strange problem when i tried to compile my own XEN Dom0/DomU
> Kernel from source (i used the apt-src kernel sources).
> I followed this manual:
>
> https://help.ubuntu.com/community/Kernel/Compile
>
>
> I created a new flavour called "xen" (see
> http://blog.avirtualhome.com/2009/11/03/how-to-compile-a-kernel-for-ubuntu-karmic/)
> and patched the kernel-source with the xen-patches (2.6.31-11).After
> that, i ran:
>
>
> debian/rules updateconfigs
>
> and i enabled the new XEN config-attributes only for my flavour
>
>
> For compilation, i ran
>
> DEB_BUILD_OPTIONS=parallel=2 AUTOBUILD=1 skipmodule=1 skipabi=1
> debian/rules binary-debs
>
> And here is the first of my 2 problems. When i omitted the skipmodule
> flag, i got some warnings about missing modules, what exactly does this
> mean (are the modules in the kernel config but not in the kernel source
> anymore????)?
>
> Then i set the flag, and the compilation went through fine (about 20
> minutes) but i got the following error:
>
> WW: Explicitly asked to ignore failures (probably not good)
> II: New modules (you've been busy, wipe the poop off your nose)
> II: Done
> dh_testdir
> dh_testroot
> dh_clean -k -plinux-image-2.6.31-19-xen
> dh_clean -k -plinux-headers-2.6.31-19-xen
> dh_clean -k -plinux-image-debug-2.6.31-19-xen
> # The main image
> # compress_file logic required because not all architectures
> # generate a zImage automatically out of the box
> install -m644 -D
> /root/linux-2.6.31/debian/build/build-xen/arch/x86_64/boot/bzImage
>
> /root/linux-2.6.31/debian/linux-image-2.6.31-19-xen/boot/vmlinuz-2.6.31-19-xen
>
> install: cannot stat
> `/root/linux-2.6.31/debian/build/build-xen/arch/x86_64/boot/bzImage': No
> such file or directory
> make: *** [install-xen] Error 1
>
> I have some knowledge about debian/ubuntu package building, but as i
> discovered, the kernel rules-file is a bit complicated and i don't know
> where the error could be. What i know is that
>
> /root/linux-2.6.31/debian/linux-image-2.6.31-19-xen/boot/vmlinuz-2.6.31-19-xen
>
>
> doesn't exist
>
>
> Can you please help me, because i really need this Xen Dom0/U Kernel for
> Ubuntu Karmic (x86_64).
>
>
> Greets Thomas
>
>
>
>
Check your configuration. It kind of looks like your version configs are
messed up. They should be:
debian.master/config/config.common.ubuntu:CONFIG_LOCALVERSION=""
debian.master/config/config.common.ubuntu:# CONFIG_LOCALVERSION_AUTO is
not set
The definitive source for kernel maintenance is here:
--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
03-03-2010, 04:26 PM
Thomas Stather
Problem when trying to compile ubuntu-kernel from source (via apt-
Am 01.03.2010 15:12, schrieb Tim Gardner:
Thomas Stather wrote:
Hello everybody
I have a strange problem when i tried to compile my own XEN Dom0/DomU
Kernel from source (i used the apt-src kernel sources).
I followed this manual:
https://help.ubuntu.com/community/Kernel/Compile
I created a new flavour called "xen" (see
http://blog.avirtualhome.com/2009/11/03/how-to-compile-a-kernel-for-ubuntu-karmic/)
and patched the kernel-source with the xen-patches (2.6.31-11).After
that, i ran:
debian/rules updateconfigs
and i enabled the new XEN config-attributes only for my flavour
And here is the first of my 2 problems. When i omitted the skipmodule
flag, i got some warnings about missing modules, what exactly does this
mean (are the modules in the kernel config but not in the kernel source
anymore????)?
Then i set the flag, and the compilation went through fine (about 20
minutes) but i got the following error:
WW: Explicitly asked to ignore failures (probably not good)
II: New modules (you've been busy, wipe the poop off your nose)
II: Done
dh_testdir
dh_testroot
dh_clean -k -plinux-image-2.6.31-19-xen
dh_clean -k -plinux-headers-2.6.31-19-xen
dh_clean -k -plinux-image-debug-2.6.31-19-xen
# The main image
# compress_file logic required because not all architectures
# generate a zImage automatically out of the box
install -m644 -D
/root/linux-2.6.31/debian/build/build-xen/arch/x86_64/boot/bzImage
install: cannot stat
`/root/linux-2.6.31/debian/build/build-xen/arch/x86_64/boot/bzImage': No
such file or directory
make: *** [install-xen] Error 1
I have some knowledge about debian/ubuntu package building, but as i
discovered, the kernel rules-file is a bit complicated and i don't know
where the error could be. What i know is that
******* sed -e 's/.*/([^/]*).ko/1/' | sort >
/root/linux-2.6.31/debian.master/abi/2.6.31-19.56/amd64/xen.modules
II: Checking modules for xen...
** reading new modules...read 2459 modules.
** reading old modules...
***** MISS: 9pnet_virtio
***** MISS: amd64_edac_mod
***** MISS: epl
***** MISS: evtchn
***** MISS: kvm
***** MISS: kvm-amd
***** MISS: kvm-intel
***** MISS: p4-clockmod
***** MISS: snd-hrtimer
***** MISS: snd-pcsp
***** MISS: speedstep-lib
***** MISS: virtio
***** MISS: virtio_balloon
***** MISS: virtio_blk
***** MISS: virtio_console
***** MISS: virtio_net
***** MISS: virtio_pci
***** MISS: virtio_ring
***** MISS: virtio-rng
***** MISS: walkera0701
***** MISS: xen-blkfront
***** MISS: xen-fbfront
***** MISS: xenfs
***** MISS: xen-kbdfront
***** MISS: xen-netfront
***** NEW : sfc_netutil
***** NEW : xennet
***** NEW : tpm_xenu
***** NEW : xen-scsibk
***** NEW : 8250
***** NEW : xenblk
***** NEW : xen-hcd
***** NEW : usbbk
***** NEW : 8250_pnp
***** NEW : sfc_netfront
***** NEW : 8250_pci
***** NEW : serial_core
***** NEW : xenscsi
***** read 2471 modules : new(13)* missing(25)
EE: Missing modules (start begging for mercy)
make[1]: *** [module-check-xen] Fehler 1
make: *** [binary-xen] Fehler 2
root@karmic-compiler-server-64:~/linux-2.6.31#
What is wrong here (i don't use git, because i want to do a local
compilation), i couldn't find anything in the document you posted?
Furthermore i haven't done an ABI bump, as the ABI checks completes
without an error.
Greets Thomas
--
Thomas Stather, Fraunhofer SIT
Abteilung PSS
Zimmer 64
Rheinstrasse 75, 64295 Darmstadt, Germany
Tel: +49 (0) 6151 86960058
http://www.sit.fraunhofer.de
--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
03-18-2010, 04:05 AM
Thomas Stather
Problem when trying to compile ubuntu-kernel from source (via apt-
Am 03.03.2010 18:26, schrieb Thomas Stather:
Am 01.03.2010 15:12, schrieb Tim Gardner:
Thomas Stather wrote:
Hello everybody
I have a strange problem when i tried to compile my own XEN Dom0/DomU
Kernel from source (i used the apt-src kernel sources).
I followed this manual:
https://help.ubuntu.com/community/Kernel/Compile
I created a new flavour called "xen" (see
http://blog.avirtualhome.com/2009/11/03/how-to-compile-a-kernel-for-ubuntu-karmic/)
and patched the kernel-source with the xen-patches (2.6.31-11).After
that, i ran:
debian/rules updateconfigs
and i enabled the new XEN config-attributes only for my flavour
And here is the first of my 2 problems. When i omitted the skipmodule
flag, i got some warnings about missing modules, what exactly does this
mean (are the modules in the kernel config but not in the kernel source
anymore????)?
Then i set the flag, and the compilation went through fine (about 20
minutes) but i got the following error:
WW: Explicitly asked to ignore failures (probably not good)
II: New modules (you've been busy, wipe the poop off your nose)
II: Done
dh_testdir
dh_testroot
dh_clean -k -plinux-image-2.6.31-19-xen
dh_clean -k -plinux-headers-2.6.31-19-xen
dh_clean -k -plinux-image-debug-2.6.31-19-xen
# The main image
# compress_file logic required because not all architectures
# generate a zImage automatically out of the box
install -m644 -D
/root/linux-2.6.31/debian/build/build-xen/arch/x86_64/boot/bzImage
install: cannot stat
`/root/linux-2.6.31/debian/build/build-xen/arch/x86_64/boot/bzImage': No
such file or directory
make: *** [install-xen] Error 1
I have some knowledge about debian/ubuntu package building, but as i
discovered, the kernel rules-file is a bit complicated and i don't know
where the error could be. What i know is that
******* sed -e 's/.*/([^/]*).ko/1/' | sort >
/root/linux-2.6.31/debian.master/abi/2.6.31-19.56/amd64/xen.modules
II: Checking modules for xen...
** reading new modules...read 2459 modules.
** reading old modules...
***** MISS: 9pnet_virtio
***** MISS: amd64_edac_mod
***** MISS: epl
***** MISS: evtchn
***** MISS: kvm
***** MISS: kvm-amd
***** MISS: kvm-intel
***** MISS: p4-clockmod
***** MISS: snd-hrtimer
***** MISS: snd-pcsp
***** MISS: speedstep-lib
***** MISS: virtio
***** MISS: virtio_balloon
***** MISS: virtio_blk
***** MISS: virtio_console
***** MISS: virtio_net
***** MISS: virtio_pci
***** MISS: virtio_ring
***** MISS: virtio-rng
***** MISS: walkera0701
***** MISS: xen-blkfront
***** MISS: xen-fbfront
***** MISS: xenfs
***** MISS: xen-kbdfront
***** MISS: xen-netfront
***** NEW : sfc_netutil
***** NEW : xennet
***** NEW : tpm_xenu
***** NEW : xen-scsibk
***** NEW : 8250
***** NEW : xenblk
***** NEW : xen-hcd
***** NEW : usbbk
***** NEW : 8250_pnp
***** NEW : sfc_netfront
***** NEW : 8250_pci
***** NEW : serial_core
***** NEW : xenscsi
***** read 2471 modules : new(13)* missing(25)
EE: Missing modules (start begging for mercy)
make[1]: *** [module-check-xen] Fehler 1
make: *** [binary-xen] Fehler 2
root@karmic-compiler-server-64:~/linux-2.6.31#
What is wrong here (i don't use git, because i want to do a local
compilation), i couldn't find anything in the document you posted?
Furthermore i haven't done an ABI bump, as the ABI checks completes
without an error.
Greets Thomas
--
Thomas Stather, Fraunhofer SIT
Abteilung PSS
Zimmer 64
Rheinstrasse 75, 64295 Darmstadt, Germany
Tel: +49 (0) 6151 86960058
http://www.sit.fraunhofer.de
Hello
In my last attempt, i used skipmodule=true to skip the modules error,
but now i have the first error again (stat .... no such file or
directory), even if i change the server flavour to support Dom0
operations and build it with debian/rules binary-server.
Please help me as this is urgend and i don't know who to ask otherwise.
Greets Thomas
--
Thomas Stather, Fraunhofer SIT
Abteilung PSS
Zimmer 64
Rheinstrasse 75, 64295 Darmstadt, Germany
Tel: +49 (0) 6151 86960058
http://www.sit.fraunhofer.de
--
kernel-team mailing list
kernel-team@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kernel-team
Problem when trying to compile ubuntu-kernel from source (via apt-
