FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Red Hat Linux

 
 
LinkBack Thread Tools
 
Old 02-04-2009, 08:50 PM
"Geofrey Rainey"
 
Default determine hardware raid

Yes, you can reboot the server and there will be a BIOS interface for
the RAID
Card, in here it will list all the details of your RAID configuration.


-----Original Message-----
From: redhat-list-bounces@redhat.com
[mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
Sent: Thursday, 5 February 2009 9:38 a.m.
To: General Red Hat Linux discussion list
Subject: determine hardware raid

Chaps,

Is there a way to determine hardware RAID and the type used? I know that
mdadm is available for software RAID. Please do tell me if this is the
wrong list and I'll move along ;-)

--
John Maclean
07739 171 531
MSc (DIC)

Timezone: GMT

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
================================================== ========
For more information on the Television New Zealand Group, visit us
online at tvnz.co.nz
================================================== ========
CAUTION: This e-mail and any attachment(s) contain information that
is intended to be read only by the named recipient(s). This information
is not to be used or stored by any other person and/or organisation.


--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
 
Old 02-04-2009, 09:32 PM
john maclean
 
Default determine hardware raid

So am I right in thinking that the -only- way to do this results in
server downtime? I know how to get to a sever's RAID configurations.
Looks like dmidecode wont be able to help either.

Thanks for the reply.



2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:
> Yes, you can reboot the server and there will be a BIOS interface for
> the RAID
> Card, in here it will list all the details of your RAID configuration.
>
>
> -----Original Message-----
> From: redhat-list-bounces@redhat.com
> [mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
> Sent: Thursday, 5 February 2009 9:38 a.m.
> To: General Red Hat Linux discussion list
> Subject: determine hardware raid
>
> Chaps,
>
> Is there a way to determine hardware RAID and the type used? I know that
> mdadm is available for software RAID. Please do tell me if this is the
> wrong list and I'll move along ;-)
>
> --
> John Maclean
> 07739 171 531
> MSc (DIC)
>
> Timezone: GMT
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
> ================================================== ========
> For more information on the Television New Zealand Group, visit us
> online at tvnz.co.nz
> ================================================== ========
> CAUTION: This e-mail and any attachment(s) contain information that
> is intended to be read only by the named recipient(s). This information
> is not to be used or stored by any other person and/or organisation.
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>



--
John Maclean
07739 171 531
MSc (DIC)

Timezone: GMT

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
 
Old 02-04-2009, 09:38 PM
 
Default determine hardware raid

Seems to me there ought to be some kind of an object down in
/proc/scsi that you should be able to look at to glean this
information -- but that's a guess, since that's also a very
system-dependent thing.

Quoting john maclean <jayeola@gmail.com>:


So am I right in thinking that the -only- way to do this results in
server downtime? I know how to get to a sever's RAID configurations.
Looks like dmidecode wont be able to help either.

Thanks for the reply.

2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:

Yes, you can reboot the server and there will be a BIOS interface for
the RAID
Card, in here it will list all the details of your RAID configuration.

-----Original Message-----
From: redhat-list-bounces@redhat.com
[mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
Sent: Thursday, 5 February 2009 9:38 a.m.
To: General Red Hat Linux discussion list
Subject: determine hardware raid

Chaps,

Is there a way to determine hardware RAID and the type used? I know that
mdadm is available for software RAID. Please do tell me if this is the
wrong list and I'll move along ;-)

--
John Maclean
07739 171 531
MSc (DIC)

Timezone: GMT

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
================================================== ========
For more information on the Television New Zealand Group, visit us
online at tvnz.co.nz
================================================== ========
CAUTION: This e-mail and any attachment(s) contain information that
is intended to be read only by the named recipient(s). This information
is not to be used or stored by any other person and/or organisation.


--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list





--
John Maclean
07739 171 531
MSc (DIC)

Timezone: GMT

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list






--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
 
Old 02-04-2009, 09:40 PM
"Sandor W. Sklar"
 
Default determine hardware raid

On Feb 4, 2009, at 2:32 PM, john maclean wrote:


So am I right in thinking that the -only- way to do this results in
server downtime? I know how to get to a sever's RAID configurations.
Looks like dmidecode wont be able to help either.

Thanks for the reply.


Well, it depends on what kind of RAID card you have in your system.
Some of my Sun Fire X4100 (and friends) systems have an LSASAS1064
card in them. I know this by:


# cat /proc/mpt/summary
ioc0: LSISAS1064, FwRev=01102800h, Ports=1, MaxQ=268, IRQ=209

... and I can use that info with the "mpt-status" command ...

# mpt-status -p
Checking for SCSI ID:0
Checking for SCSI ID:1
Checking for SCSI ID:2
Found SCSI id=2, use 'mpt-status -i 2`` to get more information.

# mpt-status -i 2
ioc0 vol_id 2 type IM, 2 phy, 67 GB, state OPTIMAL, flags ENABLED
ioc0 phy 1 scsi_id 4 FUJITSU MAV2073RCSUN72G 0301, 68 GB, state
ONLINE, flags NONE
ioc0 phy 0 scsi_id 3 FUJITSU MAV2073RCSUN72G 0301, 68 GB, state
ONLINE, flags NONE



... which tells me that the two SAS drives that are hardware mirrored
are in good shape. I wrap all that up in a script that our Nagios
server runs and reports errors on.


Will this work for your hardware RAID? I don't know; I don't see
where you're listing the server and the RAID card it has within.


-s-

--
Sandor W. Sklar
Unix Systems Administrator
Digital Libraries Systems & Services
Stanford University Libraries

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
 
Old 02-04-2009, 09:49 PM
"Carl G. Riches"
 
Default determine hardware raid

On Wed, 4 Feb 2009, john maclean wrote:


So am I right in thinking that the -only- way to do this results in
server downtime? I know how to get to a sever's RAID configurations.
Looks like dmidecode wont be able to help either.

Thanks for the reply.


If you have a 3ware RAID controller you can use tw_cli from the Linux
command line to view and manage your controller. The software is available
from the 3ware corporate site:


http://3ware.com/support/download.asp

Carl

--
Carl G. Riches
IT Manager
Department of Biostatistics
Box 357232 voice: 206-616-2725
University of Washington fax: 206-543-3286
Seattle, WA 98195-7232 internet: cgr@u.washington.edu





2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:

Yes, you can reboot the server and there will be a BIOS interface for
the RAID
Card, in here it will list all the details of your RAID configuration.


-----Original Message-----
From: redhat-list-bounces@redhat.com
[mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
Sent: Thursday, 5 February 2009 9:38 a.m.
To: General Red Hat Linux discussion list
Subject: determine hardware raid

Chaps,

Is there a way to determine hardware RAID and the type used? I know that
mdadm is available for software RAID. Please do tell me if this is the
wrong list and I'll move along ;-)

--
John Maclean
07739 171 531
MSc (DIC)

Timezone: GMT

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
================================================== ========
For more information on the Television New Zealand Group, visit us
online at tvnz.co.nz
================================================== ========
CAUTION: This e-mail and any attachment(s) contain information that
is intended to be read only by the named recipient(s). This information
is not to be used or stored by any other person and/or organisation.


--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list








--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
 
Old 02-04-2009, 09:55 PM
Terry Zink
 
Default determine hardware raid

If you know the model of the raid card, many hardware raid card manufacturers have console apps that let you query the card locally.

Example with adaptec it's adaptec storage manager and the console ap is in /usr/StorMan/arcconf


---
Terry Zink
Sr. Linux Engineer, RHCE
Logicworks
Phone: 212-625-5444
Email: tzink@logicworks.net


-----Original Message-----
From: redhat-list-bounces@redhat.com [mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
Sent: Wednesday, February 04, 2009 5:33 PM
To: General Red Hat Linux discussion list
Subject: Re: determine hardware raid

So am I right in thinking that the -only- way to do this results in
server downtime? I know how to get to a sever's RAID configurations.
Looks like dmidecode wont be able to help either.

Thanks for the reply.



2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:
> Yes, you can reboot the server and there will be a BIOS interface for
> the RAID
> Card, in here it will list all the details of your RAID configuration.
>
>
> -----Original Message-----
> From: redhat-list-bounces@redhat.com
> [mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
> Sent: Thursday, 5 February 2009 9:38 a.m.
> To: General Red Hat Linux discussion list
> Subject: determine hardware raid
>
> Chaps,
>
> Is there a way to determine hardware RAID and the type used? I know that
> mdadm is available for software RAID. Please do tell me if this is the
> wrong list and I'll move along ;-)
>
> --
> John Maclean
> 07739 171 531
> MSc (DIC)
>
> Timezone: GMT
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
> ================================================== ========
> For more information on the Television New Zealand Group, visit us
> online at tvnz.co.nz
> ================================================== ========
> CAUTION: This e-mail and any attachment(s) contain information that
> is intended to be read only by the named recipient(s). This information
> is not to be used or stored by any other person and/or organisation.
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>



--
John Maclean
07739 171 531
MSc (DIC)

Timezone: GMT

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
 
Old 02-04-2009, 10:00 PM
"Geofrey Rainey"
 
Default determine hardware raid

If you have an HP server and the "HP Proliant Support Pack" installed,
you can query and
Configure the RAID card with the command: hpacucli (hp array
configuration utility
command line interface).


-----Original Message-----
From: redhat-list-bounces@redhat.com
[mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
Sent: Thursday, 5 February 2009 11:33 a.m.
To: General Red Hat Linux discussion list
Subject: Re: determine hardware raid

So am I right in thinking that the -only- way to do this results in
server downtime? I know how to get to a sever's RAID configurations.
Looks like dmidecode wont be able to help either.

Thanks for the reply.



2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:
> Yes, you can reboot the server and there will be a BIOS interface for
> the RAID Card, in here it will list all the details of your RAID
> configuration.
>
>
> -----Original Message-----
> From: redhat-list-bounces@redhat.com
> [mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
> Sent: Thursday, 5 February 2009 9:38 a.m.
> To: General Red Hat Linux discussion list
> Subject: determine hardware raid
>
> Chaps,
>
> Is there a way to determine hardware RAID and the type used? I know
> that mdadm is available for software RAID. Please do tell me if this
> is the wrong list and I'll move along ;-)
>
> --
> John Maclean
> 07739 171 531
> MSc (DIC)
>
> Timezone: GMT
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
> ================================================== ========
> For more information on the Television New Zealand Group, visit us
> online at tvnz.co.nz
> ================================================== ========
> CAUTION: This e-mail and any attachment(s) contain information that
> is intended to be read only by the named recipient(s). This
> information is not to be used or stored by any other person and/or
organisation.
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>



--
John Maclean
07739 171 531
MSc (DIC)

Timezone: GMT

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
================================================== ========
For more information on the Television New Zealand Group, visit us
online at tvnz.co.nz
================================================== ========
CAUTION: This e-mail and any attachment(s) contain information that
is intended to be read only by the named recipient(s). This information
is not to be used or stored by any other person and/or organisation.


--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
 
Old 02-04-2009, 11:02 PM
john maclean
 
Default determine hardware raid

Ah, that's handy to know! Anything similar for Dells?

2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:
> If you have an HP server and the "HP Proliant Support Pack" installed,
> you can query and
> Configure the RAID card with the command: hpacucli (hp array
> configuration utility
> command line interface).
>
>
> -----Original Message-----
> From: redhat-list-bounces@redhat.com
> [mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
> Sent: Thursday, 5 February 2009 11:33 a.m.
> To: General Red Hat Linux discussion list
> Subject: Re: determine hardware raid
>
> So am I right in thinking that the -only- way to do this results in
> server downtime? I know how to get to a sever's RAID configurations.
> Looks like dmidecode wont be able to help either.
>
> Thanks for the reply.
>
>
>
> 2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:
>> Yes, you can reboot the server and there will be a BIOS interface for
>> the RAID Card, in here it will list all the details of your RAID
>> configuration.
>>
>>
>> -----Original Message-----
>> From: redhat-list-bounces@redhat.com
>> [mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
>> Sent: Thursday, 5 February 2009 9:38 a.m.
>> To: General Red Hat Linux discussion list
>> Subject: determine hardware raid
>>
>> Chaps,
>>
>> Is there a way to determine hardware RAID and the type used? I know
>> that mdadm is available for software RAID. Please do tell me if this
>> is the wrong list and I'll move along ;-)
>>
>> --
>> John Maclean
>> 07739 171 531
>> MSc (DIC)
>>
>> Timezone: GMT
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>> ================================================== ========
>> For more information on the Television New Zealand Group, visit us
>> online at tvnz.co.nz
>> ================================================== ========
>> CAUTION: This e-mail and any attachment(s) contain information that
>> is intended to be read only by the named recipient(s). This
>> information is not to be used or stored by any other person and/or
> organisation.
>>
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
>
> --
> John Maclean
> 07739 171 531
> MSc (DIC)
>
> Timezone: GMT
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
> ================================================== ========
> For more information on the Television New Zealand Group, visit us
> online at tvnz.co.nz
> ================================================== ========
> CAUTION: This e-mail and any attachment(s) contain information that
> is intended to be read only by the named recipient(s). This information
> is not to be used or stored by any other person and/or organisation.
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>



--
John Maclean
07739 171 531
MSc (DIC)

Timezone: GMT

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
 
Old 02-05-2009, 01:52 AM
Wayne Betts
 
Default determine hardware raid

Miscellaneous thoughts:

If you haven't done it already, get some basic info about the controller from "lspci", so you'll
have a chance of finding something relevant with Google.

Dell does have some RAID utilities for various PERC controllers. "aacraid" and "afacli" might be
useful terms to search for on Google, iirc.

Dell has OpenManage Server Assistant or something like that came with a bunch of their PowerEdge
systems. I never much liked it but did manage to get some basic monitoring going using some of the
tools that are part of it.

Over the last few years I've managed to get some useful information on this subject starting here:

http://linux.dell.com/storage.shtml


-Wayne Betts

john maclean wrote:
> Ah, that's handy to know! Anything similar for Dells?
>
> 2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:
>> If you have an HP server and the "HP Proliant Support Pack" installed,
>> you can query and
>> Configure the RAID card with the command: hpacucli (hp array
>> configuration utility
>> command line interface).
>>
>>
>> -----Original Message-----
>> From: redhat-list-bounces@redhat.com
>> [mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
>> Sent: Thursday, 5 February 2009 11:33 a.m.
>> To: General Red Hat Linux discussion list
>> Subject: Re: determine hardware raid
>>
>> So am I right in thinking that the -only- way to do this results in
>> server downtime? I know how to get to a sever's RAID configurations.
>> Looks like dmidecode wont be able to help either.
>>
>> Thanks for the reply.
>>
>>
>>
>> 2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:
>>> Yes, you can reboot the server and there will be a BIOS interface for
>>> the RAID Card, in here it will list all the details of your RAID
>>> configuration.
>>>
>>>
>>> -----Original Message-----
>>> From: redhat-list-bounces@redhat.com
>>> [mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
>>> Sent: Thursday, 5 February 2009 9:38 a.m.
>>> To: General Red Hat Linux discussion list
>>> Subject: determine hardware raid
>>>
>>> Chaps,
>>>
>>> Is there a way to determine hardware RAID and the type used? I know
>>> that mdadm is available for software RAID. Please do tell me if this
>>> is the wrong list and I'll move along ;-)
>>>
>>> --
>>> John Maclean
>>> 07739 171 531
>>> MSc (DIC)
>>>
>>> Timezone: GMT
>>>
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>> ================================================== ========
>>> For more information on the Television New Zealand Group, visit us
>>> online at tvnz.co.nz
>>> ================================================== ========
>>> CAUTION: This e-mail and any attachment(s) contain information that
>>> is intended to be read only by the named recipient(s). This
>>> information is not to be used or stored by any other person and/or
>> organisation.
>>>
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>
>>
>>
>> --
>> John Maclean
>> 07739 171 531
>> MSc (DIC)
>>
>> Timezone: GMT
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>> ================================================== ========
>> For more information on the Television New Zealand Group, visit us
>> online at tvnz.co.nz
>> ================================================== ========
>> CAUTION: This e-mail and any attachment(s) contain information that
>> is intended to be read only by the named recipient(s). This information
>> is not to be used or stored by any other person and/or organisation.
>>
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
>

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
 
Old 02-06-2009, 03:28 PM
Berthold Cogel
 
Default determine hardware raid

john maclean schrieb:
> Ah, that's handy to know! Anything similar for Dells?
>

Yes..

Get the Dell OpenManage Server Administrator from the Dell Support
homepage or from the ftp site.

It's ftp://ftp.dell.com/sysman/.

Look for the OM_x.x.x_ManNode_A00.tar.gz packages. Create a directory
'dell' somewhere and unpack the tarball to this directory. Call
setup.sh. This will install the software to /opt/dell (with RPMs) and
start the services. One is the dsm_om_connsvc which delivers a web
interface on port 1311. This is a complete interface to the system
internals (monitoring, RAID, BIOS..).

But you can also manage and monitor your systems on the command line:
omreport system shows you details about temperature, fans CPU ...
omreport storage is the interface to the RAID controller and the disks.

And with omconfig you can configure your BIOS, warning levels for fans
.. and best of all, you can manage your disks (assign hot spare,
remoe/insert disks....).

We usually disable the webservice and use only the CLI. For nagios and
BigBrother you can get plugins which use omreport for remote monitoring.

OMSA is a replacement for the old megaraid and afacli tools for Dell
PERCs, but you should bring your BIOS and firmware versions up to date
for newer versions.

You can get the update packages at the ftp site or at the web support site.


> 2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:
>> If you have an HP server and the "HP Proliant Support Pack" installed,
>> you can query and
>> Configure the RAID card with the command: hpacucli (hp array
>> configuration utility
>> command line interface).
>>
>>
>> -----Original Message-----
>> From: redhat-list-bounces@redhat.com
>> [mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
>> Sent: Thursday, 5 February 2009 11:33 a.m.
>> To: General Red Hat Linux discussion list
>> Subject: Re: determine hardware raid
>>
>> So am I right in thinking that the -only- way to do this results in
>> server downtime? I know how to get to a sever's RAID configurations.
>> Looks like dmidecode wont be able to help either.
>>
>> Thanks for the reply.
>>
>>
>>
>> 2009/2/4 Geofrey Rainey <Geofrey.Rainey@tvnz.co.nz>:
>>> Yes, you can reboot the server and there will be a BIOS interface for
>>> the RAID Card, in here it will list all the details of your RAID
>>> configuration.
>>>
>>>
>>> -----Original Message-----
>>> From: redhat-list-bounces@redhat.com
>>> [mailto:redhat-list-bounces@redhat.com] On Behalf Of john maclean
>>> Sent: Thursday, 5 February 2009 9:38 a.m.
>>> To: General Red Hat Linux discussion list
>>> Subject: determine hardware raid
>>>
>>> Chaps,
>>>
>>> Is there a way to determine hardware RAID and the type used? I know
>>> that mdadm is available for software RAID. Please do tell me if this
>>> is the wrong list and I'll move along ;-)
>>>
>>> --
>>> John Maclean
>>> 07739 171 531
>>> MSc (DIC)
>>>
>>> Timezone: GMT
>>>
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>> ================================================== ========
>>> For more information on the Television New Zealand Group, visit us
>>> online at tvnz.co.nz
>>> ================================================== ========
>>> CAUTION: This e-mail and any attachment(s) contain information that
>>> is intended to be read only by the named recipient(s). This
>>> information is not to be used or stored by any other person and/or
>> organisation.
>>>
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>
>>
>>
>> --
>> John Maclean
>> 07739 171 531
>> MSc (DIC)
>>
>> Timezone: GMT
>>

Regards,
Berthold Cogel

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
 

Thread Tools




All times are GMT. The time now is 04:38 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org