FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Ubuntu > Kubuntu User

 
 
LinkBack Thread Tools
 
Old 01-15-2009, 11:40 AM
 
Default eth0 device down

>However, the internet connection device 'eth0' is still 'down' - so
>far I did not manage to activate it.

Imho some modern laptops have two version of BIOS, one for Win XP
one for Vista. Try a flash the laptop with the BIOS for Win XP (if exist),
maybe this help you.
Are you sure that the NIC is enabled in BIOS ? Or please specify the
precise type of your laptop.

Regards

Georg

--
kubuntu-users mailing list
kubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
 
Old 01-15-2009, 12:06 PM
"Jonas Norlander"
 
Default eth0 device down

2009/1/15 <Jiri.Horak@ing.cz>:
>
>>However, the internet connection device 'eth0' is still 'down' - so
>>far I did not manage to activate it.
>
> Imho some modern laptops have two version of BIOS, one for Win XP
> one for Vista. Try a flash the laptop with the BIOS for Win XP (if exist),
> maybe this help you.
> Are you sure that the NIC is enabled in BIOS ? Or please specify the
> precise type of your laptop.
>
> Regards
>
> Georg
>

Are you sure its name is eth0? It probably are but just to be sure
check your NIC names with the command "ifconfig" or "ip link".

/ Jonas

--
kubuntu-users mailing list
kubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
 
Old 01-15-2009, 01:42 PM
"Bas Roufs"
 
Default eth0 device down

Dear George

>>..... the internet connection device 'eth0' is still 'down' ....

> Imho some modern laptops have two version of BIOS, one for Win XP
> one for Vista. Try a flash the laptop with the BIOS for Win XP (if exist),
> maybe this help you.

The laptop I am talking about is a 'Medion 5400', produced in 2002.
Other important specs: 250 MB DDR RAM, 40 GB HD, Pentium 4 Processor
2,5 GHZ, 4 x USB 2, Firewire, Bluetooth, PCMCIA. The BIOS of that
machine mentions only two operating systems: DOS and Windows XP - the
2 original OS of the laptop. The HD was simply not accessible any more
with Windows - the only way to recover it was to install some Linux
distro on it and to reformat the whole disk by doing so. But I did not
yet find any way to change the BIOS in such a way that it takes the
new OS (Kubuntu 8.10) into account. Because of some advise at another
Linux forum, I switched the OS mentioned in the BIOS to 'DOS' before
installing Kubuntu. May be this has helped me to install Kubuntu 8.10,
but so far not to establish an internet connection.
Today, I changed something in the file etc/ I changed the OS
indication in the BIOS back to 'Windows XP'. Additionally I changed
some instructions in the file "/etc/network/interfaces". The
combination of both measures resulted so far in an 'unmanaged' status
of eth0, instead of 'down'. But the active connection still is not
available.

> Are you sure that the NIC is enabled in BIOS ?

Can you briefly explain what 'NIC' means in this context and how I can
find it in the BIOS menu?


> Or please specify the precise type of your laptop.

See above.

Respectfully yours,

Bas.
--
===============
Viaconsensus
Bas G. Roufs M.A.
Van 't Hoffstraat 1
NL-3514 VT Utrecht
M. +31.6.446.835.10
T. +31.30.785.20.40
BasRoufs@gmail.com
===============

--
kubuntu-users mailing list
kubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
 
Old 01-15-2009, 01:47 PM
"Bas Roufs"
 
Default eth0 device down

Hello Jonas and everybody

>> Are you sure that the NIC is enabled in BIOS ? (snip).....

> Are you sure its name is eth0? It probably are but just to be sure
> check your NIC names with the command "ifconfig" or "ip link".
Yes, the name 'eth0' is correct - I already checked it via ifconfig.
What means 'NIC' in this context?

Thx. for your reply.

Bas.




--
===============
Viaconsensus
Bas G. Roufs M.A.
Van 't Hoffstraat 1
NL-3514 VT Utrecht
M. +31.6.446.835.10
T. +31.30.785.20.40
BasRoufs@gmail.com
===============

--
kubuntu-users mailing list
kubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
 
Old 01-15-2009, 02:14 PM
Matthew Flaschen
 
Default eth0 device down

Bas Roufs wrote:
> Hello Jonas and everybody
>
>>> Are you sure that the NIC is enabled in BIOS ? (snip).....
>
>> Are you sure its name is eth0? It probably are but just to be sure
>> check your NIC names with the command "ifconfig" or "ip link".
> Yes, the name 'eth0' is correct - I already checked it via ifconfig.
> What means 'NIC' in this context?

Network Interface Card, in your case an Ethernet card.

Matt Flaschen

--
kubuntu-users mailing list
kubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
 
Old 01-15-2009, 02:25 PM
Gene Heskett
 
Default eth0 device down

On Thursday 15 January 2009, Bas Roufs wrote:
>Hello Jonas and everybody
>
>>> Are you sure that the NIC is enabled in BIOS ? (snip).....
>>
>> Are you sure its name is eth0? It probably are but just to be sure
>> check your NIC names with the command "ifconfig" or "ip link".
>
>Yes, the name 'eth0' is correct - I already checked it via ifconfig.
>What means 'NIC' in this context?

Network Interface Card.

>Thx. for your reply.
>
>Bas.
>
>
>
>
>--
>===============
>Viaconsensus
>Bas G. Roufs M.A.
>Van 't Hoffstraat 1
>NL-3514 VT Utrecht
>M. +31.6.446.835.10
>T. +31.30.785.20.40
>BasRoufs@gmail.com
>===============



--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
The only rose without thorns is friendship.

--
kubuntu-users mailing list
kubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
 
Old 01-15-2009, 04:12 PM
Eberhard Roloff
 
Default eth0 device down

Bas Roufs wrote:
>> Imho some modern laptops have two version of BIOS, one for Win XP
>> one for Vista. Try a flash the laptop with the BIOS for Win XP (if exist),
>> maybe this help you.
>
> The laptop I am talking about is a 'Medion 5400', produced in 2002.

So simply forget about XP/Vista Bios considerations

>But I did not
> yet find any way to change the BIOS in such a way that it takes the
> new OS (Kubuntu 8.10) into account.

There is none. So you do not need to look for it.

Because of some advise at another
>I changed the OS
> indication in the BIOS back to 'Windows XP'.

This is ok. With "DOS" you might get a different mode of harddisk
recognition and/or memory handling, so "XP" is the correct setting.

> But the active connection still is not
> available.

This is quite unusual, especially for such an old machine. Generally
your network should simply work out of the box. As it obviously does
not, we better begin with more basic things:


1. Before doing anything else, look within your Bios, likely in
"peripherals" (or similar) setup, whether you can (de)activate your
network card. If so, you need to have it enabled. ;-)).
If you do not find it, be sure to look at EVERY setting in ANY Edge of
the Bios to be sure, that you did not miss it.

2. After enabling the Network Card (possibly), please run "sudo lspci"
from a command-line.
You should get something similar to this from the desktop, I am writing
this on:
[...]
02:05.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller (rev 13).
[...]

With your result, we will be able to look up whether your Network
controller might possibly be (in)compatible with Linux.
>
>> Are you sure that the NIC is enabled in BIOS ?

See before
>
> Can you briefly explain what 'NIC' means in this context and how I can
> find it in the BIOS menu?

Look it up! "Internal Ethernet Card" might be good to search for, maybe
not exactly, but very similar.

Kind regards
Eberhard


--
kubuntu-users mailing list
kubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
 
Old 01-15-2009, 06:58 PM
"Bas Roufs"
 
Default eth0 device down

Dear Eberhard and everybody else

>
> > But the active connection still is not available.
>
> This is quite unusual, especially for such an old machine. As it obviously
> does not, we better begin with more basic things:

> 1. Before doing anything else, look within your Bios, likely in
> "peripherals" (or similar) setup, whether you can (de)activate your
> network card. If so, you need to have it enabled. ;-)). ....

I have done so - however, eth0 is still 'unmanaged'.

> 2. After enabling the Network Card (possibly), please run "sudo lspci"
> from a command-line.

This is the result (transferred via an USB stick):

bas@Viaconsensus2:~$ sudo lspci
(Enter; no password check because of previous sudo commands in the same session)
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host &
Memory & AGP Controller
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL
Media IO] (rev 04)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1
Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1
Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1
Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:06.0 Communication controller: Intel Corporation 536EP Data Fax Modem
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0c.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
00:0d.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4
440 Go 64M] (rev a3)
bas@Viaconsensus2:~$


So, the "ethernet controller" and several other hardware basics in my
laptop are being recognised by Linux.

Thx. for your assistance.

Bas.
--
===============
Viaconsensus
Bas G. Roufs M.A.
Van 't Hoffstraat 1
NL-3514 VT Utrecht
M. +31.6.446.835.10
T. +31.30.785.20.40
BasRoufs@gmail.com
===============

--
kubuntu-users mailing list
kubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
 
Old 01-15-2009, 08:24 PM
Nils Kassube
 
Default eth0 device down

Bas Roufs wrote:
> bas@Viaconsensus2:~$ sudo lspci
> Data Fax Modem 00:08.0 Ethernet controller: Realtek Semiconductor Co.,
> Ltd.
> RTL-8139/8139C/8139C+ (rev 10)

There was a problem with some 8139 cards, maybe yours is one of them. If
it is there should be appropriate error messages in the log. Can you post
the output of these commands?

grep -2 8139 /var/log/messages | grep -2 error
lsmod | grep 8139

And maybe here is the solution. From
<http://ubuntuforums.org/showthread.php?t=529769>:

| I added acpi=off to /boot/grub/menu.lst which made eth0 show up

I know you can see your card but OTOH you probably have a different kernel
than the person of the forum post.


Nils

--
kubuntu-users mailing list
kubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
 
Old 01-15-2009, 09:15 PM
"Bas Roufs"
 
Default eth0 device down

Hello Nils

>> Data Fax Modem 00:08.0 Ethernet controller: Realtek Semiconductor Co.,
>> Ltd.
>> RTL-8139/8139C/8139C+ (rev 10)
>
> There was a problem with some 8139 cards, maybe yours is one of them.

This info may be useful, thx.


> If it is there should be appropriate error messages in the log. Can you post
> the output of these commands?
>
> grep -2 8139 /var/log/messages | grep -2 error
> lsmod | grep 8139

Below you find all of them - transferred by means of a USB stick.

I hope you can recognise some relevant error message in this heap of
information.

Thanks for your efforts anyway.

Respectfully Yours,

Bas.


root@Viaconsensus2:/home/bas# grep -2 8139 /var/log/messages
==============================================

Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.076371] usbcore:
registered new interface driver hub
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.076485] usbcore:
registered new device driver usb
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.114827] 8139too Fast
Ethernet driver 0.9.28
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.114886] 8139too
0000:00:08.0: enabling device (0000 -> 0003)
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.115196] ACPI: PCI
Interrupt Link [LNKB] enabled at IRQ 10
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.115202] 8139too
0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.115955] eth0: RealTek
RTL8139 at 0x1800, 00:40:ca:bc:9e:88, IRQ 10
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.149969] 8139cp: 10/100
PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.195459] ehci_hcd
0000:00:03.3: enabling device (0000 -> 0002)
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.195772] ACPI: PCI
Interrupt Link [LNKH] enabled at IRQ 5
--
Jan 14 17:39:48 Viaconsensus2 kernel: [ 0.681382] pnp: PnP ACPI:
found 11 devices
Jan 14 17:39:48 Viaconsensus2 kernel: [ 0.681387] ACPI: ACPI bus
type pnp unregistered
Jan 14 17:39:48 Viaconsensus2 kernel: [ 0.681394] PnPBIOS: Disabled
by ACPI PNP
Jan 14 17:39:48 Viaconsensus2 kernel: [ 0.681970] PCI: Using ACPI
for IRQ routing
Jan 14 17:39:48 Viaconsensus2 kernel: [ 0.682144] NET: Registered
protocol family 8
--
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.825549] usbcore:
registered new interface driver hub
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.869410] usbcore:
registered new device driver usb
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.919365] 8139too Fast
Ethernet driver 0.9.28
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.924077] 8139too
0000:00:08.0: enabling device (0000 -> 0003)
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.924392] ACPI: PCI
Interrupt Link [LNKB] enabled at IRQ 10
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.924398] 8139too
0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.925177] eth0: RealTek
RTL8139 at 0x1800, 00:40:ca:bc:9e:88, IRQ 10
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.954939] ehci_hcd
0000:00:03.3: enabling device (0000 -> 0002)
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.955248] ACPI: PCI
Interrupt Link [LNKH] enabled at IRQ 5

root@Viaconsensus2:/home/bas# grep -2 8139 /var/log/messages
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.076371] usbcore:
registered new interface driver hub
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.076485] usbcore:
registered new device driver usb
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.114827] 8139too Fast
Ethernet driver 0.9.28
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.114886] 8139too
0000:00:08.0: enabling device (0000 -> 0003)
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.115196] ACPI: PCI
Interrupt Link [LNKB] enabled at IRQ 10
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.115202] 8139too
0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.115955] eth0: RealTek
RTL8139 at 0x1800, 00:40:ca:bc:9e:88, IRQ 10
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.149969] 8139cp: 10/100
PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.195459] ehci_hcd
0000:00:03.3: enabling device (0000 -> 0002)
Jan 14 17:34:13 Viaconsensus2 kernel: [ 4.195772] ACPI: PCI
Interrupt Link [LNKH] enabled at IRQ 5
--
Jan 14 17:39:48 Viaconsensus2 kernel: [ 0.681382] pnp: PnP ACPI:
found 11 devices
Jan 14 17:39:48 Viaconsensus2 kernel: [ 0.681387] ACPI: ACPI bus
type pnp unregistered
Jan 14 17:39:48 Viaconsensus2 kernel: [ 0.681394] PnPBIOS: Disabled
by ACPI PNP
Jan 14 17:39:48 Viaconsensus2 kernel: [ 0.681970] PCI: Using ACPI
for IRQ routing
Jan 14 17:39:48 Viaconsensus2 kernel: [ 0.682144] NET: Registered
protocol family 8
--
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.825549] usbcore:
registered new interface driver hub
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.869410] usbcore:
registered new device driver usb
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.919365] 8139too Fast
Ethernet driver 0.9.28
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.924077] 8139too
0000:00:08.0: enabling device (0000 -> 0003)
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.924392] ACPI: PCI
Interrupt Link [LNKB] enabled at IRQ 10
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.924398] 8139too
0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.925177] eth0: RealTek
RTL8139 at 0x1800, 00:40:ca:bc:9e:88, IRQ 10
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.954939] ehci_hcd
0000:00:03.3: enabling device (0000 -> 0002)
Jan 14 17:39:48 Viaconsensus2 kernel: [ 4.955248] ACPI: PCI
Interrupt Link [LNKH] enabled at IRQ 5

--
Jan 15 08:36:31 Viaconsensus2 kernel: [ 4.057178] usbcore:
registered new interface driver hub
Jan 15 08:36:31 Viaconsensus2 kernel: [ 4.088991] usbcore:
registered new device driver usb
Jan 15 08:36:31 Viaconsensus2 kernel: [ 4.107992] 8139too Fast
Ethernet driver 0.9.28
Jan 15 08:36:31 Viaconsensus2 kernel: [ 4.108098] 8139too
0000:00:08.0: enabling device (0000 -> 0003)
Jan 15 08:36:31 Viaconsensus2 kernel: [ 4.108409] ACPI: PCI
Interrupt Link [LNKB] enabled at IRQ 10
Jan 15 08:36:31 Viaconsensus2 kernel: [ 4.108415] 8139too
0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Jan 15 08:36:31 Viaconsensus2 kernel: [ 4.109189] eth0: RealTek
RTL8139 at 0x1800, 00:40:ca:bc:9e:88, IRQ 10
Jan 15 08:36:31 Viaconsensus2 kernel: [ 4.125571] 8139cp: 10/100
PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 15 08:36:31 Viaconsensus2 kernel: [ 4.223757] ohci1394
0000:00:0d.0: enabling device (0010 -> 0012)
Jan 15 08:36:31 Viaconsensus2 kernel: [ 4.223772] ohci1394
0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
--
Jan 15 11:16:32 Viaconsensus2 kernel: [ 5.409096] usbcore:
registered new interface driver hub
Jan 15 11:16:32 Viaconsensus2 kernel: [ 5.445185] usbcore:
registered new device driver usb
Jan 15 11:16:32 Viaconsensus2 kernel: [ 5.454575] 8139too Fast
Ethernet driver 0.9.28
Jan 15 11:16:32 Viaconsensus2 kernel: [ 5.454670] 8139too
0000:00:08.0: enabling device (0000 -> 0003)
Jan 15 11:16:32 Viaconsensus2 kernel: [ 5.455014] ACPI: PCI
Interrupt Link [LNKB] enabled at IRQ 10
Jan 15 11:16:32 Viaconsensus2 kernel: [ 5.455019] 8139too
0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Jan 15 11:16:32 Viaconsensus2 kernel: [ 5.455892] eth0: RealTek
RTL8139 at 0x1800, 00:40:ca:bc:9e:88, IRQ 10
Jan 15 11:16:32 Viaconsensus2 kernel: [ 5.473120] 8139cp: 10/100
PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 15 11:16:32 Viaconsensus2 kernel: [ 5.585415] ohci1394
0000:00:0d.0: enabling device (0010 -> 0012)
Jan 15 11:16:32 Viaconsensus2 kernel: [ 5.585429] ohci1394
0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
--

Jan 15 11:38:23 Viaconsensus2 kernel: [ 5.382503] usbcore:
registered new interface driver hub
Jan 15 11:38:23 Viaconsensus2 kernel: [ 5.412751] usbcore:
registered new device driver usb
Jan 15 11:38:23 Viaconsensus2 kernel: [ 5.426095] 8139too Fast
Ethernet driver 0.9.28
Jan 15 11:38:23 Viaconsensus2 kernel: [ 5.426153] 8139too
0000:00:08.0: enabling device (0000 -> 0003)
Jan 15 11:38:23 Viaconsensus2 kernel: [ 5.426497] ACPI: PCI
Interrupt Link [LNKB] enabled at IRQ 10
Jan 15 11:38:23 Viaconsensus2 kernel: [ 5.426503] 8139too
0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Jan 15 11:38:23 Viaconsensus2 kernel: [ 5.427378] eth0: RealTek
RTL8139 at 0x1800, 00:40:ca:bc:9e:88, IRQ 10
Jan 15 11:38:23 Viaconsensus2 kernel: [ 5.433714] 8139cp: 10/100
PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 15 11:38:23 Viaconsensus2 kernel: [ 5.528684] ehci_hcd
0000:00:03.3: enabling device (0000 -> 0002)
Jan 15 11:38:23 Viaconsensus2 kernel: [ 5.529032] ACPI: PCI
Interrupt Link [LNKH] enabled at IRQ 5
--
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.021632] usbcore:
registered new interface driver hub
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.047939] usbcore:
registered new device driver usb
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.062222] 8139too Fast
Ethernet driver 0.9.28
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.091360] 8139too
0000:00:08.0: enabling device (0000 -> 0003)
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.091821] ACPI: PCI
Interrupt Link [LNKB] enabled at IRQ 10
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.091883] 8139too
0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.092886] eth0: RealTek
RTL8139 at 0x1800, 00:40:ca:bc:9e:88, IRQ 10
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.131198] ehci_hcd
0000:00:03.3: enabling device (0000 -> 0002)
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.131640] ACPI: PCI
Interrupt Link [LNKH] enabled at IRQ 5
--
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.144608] hub 1-0:1.0: USB
hub found
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.144714] hub 1-0:1.0: 6
ports detected
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.158806] 8139cp: 10/100
PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.249429] ACPI: PCI
Interrupt Link [LNKE] enabled at IRQ 5
Jan 15 12:03:40 Viaconsensus2 kernel: [ 5.249496] ohci_hcd
0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5

Jan 15 19:36:51 Viaconsensus2 kernel: [ 6.242075] usbcore:
registered new interface driver hub
Jan 15 19:36:51 Viaconsensus2 kernel: [ 6.269279] usbcore:
registered new device driver usb
Jan 15 19:36:51 Viaconsensus2 kernel: [ 6.280245] 8139too Fast
Ethernet driver 0.9.28
Jan 15 19:36:51 Viaconsensus2 kernel: [ 6.280303] 8139too
0000:00:08.0: enabling device (0000 -> 0003)
Jan 15 19:36:51 Viaconsensus2 kernel: [ 6.280680] ACPI: PCI
Interrupt Link [LNKB] enabled at IRQ 10
Jan 15 19:36:51 Viaconsensus2 kernel: [ 6.280686] 8139too
0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Jan 15 19:36:51 Viaconsensus2 kernel: [ 6.281564] eth0: RealTek
RTL8139 at 0x1800, 00:40:ca:bc:9e:88, IRQ 10
Jan 15 19:36:51 Viaconsensus2 kernel: [ 6.296154] 8139cp: 10/100
PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 15 19:36:51 Viaconsensus2 kernel: [ 6.346613] ehci_hcd
0000:00:03.3: enabling device (0000 -> 0002)
Jan 15 19:36:51 Viaconsensus2 kernel: [ 6.346959] ACPI: PCI
Interrupt Link [LNKH] enabled at IRQ 5
--
Jan 15 21:33:21 Viaconsensus2 kernel: [ 6.234756] usbcore:
registered new interface driver hub
Jan 15 21:33:21 Viaconsensus2 kernel: [ 6.264086] usbcore:
registered new device driver usb
Jan 15 21:33:21 Viaconsensus2 kernel: [ 6.275638] 8139too Fast
Ethernet driver 0.9.28
Jan 15 21:33:21 Viaconsensus2 kernel: [ 6.275696] 8139too
0000:00:08.0: enabling device (0000 -> 0003)
Jan 15 21:33:21 Viaconsensus2 kernel: [ 6.276153] ACPI: PCI
Interrupt Link [LNKB] enabled at IRQ 10
Jan 15 21:33:21 Viaconsensus2 kernel: [ 6.276159] 8139too
0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Jan 15 21:33:21 Viaconsensus2 kernel: [ 6.308166] eth0: RealTek
RTL8139 at 0x1800, 00:40:ca:bc:9e:88, IRQ 10
Jan 15 21:33:22 Viaconsensus2 kernel: [ 6.420939] ehci_hcd
0000:00:03.3: enabling device (0000 -> 0002)
Jan 15 21:33:22 Viaconsensus2 kernel: [ 6.421285] ACPI: PCI
Interrupt Link [LNKH] enabled at IRQ 5
--
Jan 15 21:33:22 Viaconsensus2 kernel: [ 6.421445] ehci_hcd
0000:00:03.3: new USB bus registered, assigned bus number 1
Jan 15 21:33:22 Viaconsensus2 kernel: [ 6.421506] ehci_hcd
0000:00:03.3: irq 5, io mem 0xe0003000
Jan 15 21:33:22 Viaconsensus2 kernel: [ 6.424744] 8139cp: 10/100
PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 15 21:33:22 Viaconsensus2 kernel: [ 6.433630] ehci_hcd
0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 15 21:33:22 Viaconsensus2 kernel: [ 6.433938] usb usb1:
configuration #1 chosen from 1 choice


bas@Viaconsensus2:~$ grep -2 error lsmod | grep 8139
grep: lsmod: No such file or directory

bas@Viaconsensus2:~$ grep -2 error lsmod
grep: lsmod: No such file or directory


--
===============
Viaconsensus
Bas G. Roufs M.A.
Van 't Hoffstraat 1
NL-3514 VT Utrecht
M. +31.6.446.835.10
T. +31.30.785.20.40
BasRoufs@gmail.com
===============

--
kubuntu-users mailing list
kubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users
 

Thread Tools




All times are GMT. The time now is 05:16 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org