Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Gentoo User (http://www.linux-archive.org/gentoo-user/)
-   -   laptop screen goes dark in boot (http://www.linux-archive.org/gentoo-user/658459-laptop-screen-goes-dark-boot.html)

Zhang Jun 04-22-2012 06:25 AM

laptop screen goes dark in boot
 
laptop: asus F3TC, amd Turion, NV-go7300
kernel-3.0.17-r1 tuxonice

screen goes dark just after I see the linux boot logo,
when using kernel 2.6.x, I even do not use hotkey to control lcd backlight, default light is ok,

but now, it goes dark, re-compiled kernel many times, but no luck,

in kernel acpi config page, I did't see the "video" module, and seems no /proc/acpi/video/ .

is there anyone have met this problem and have solution ?


thanks!

walt 04-22-2012 01:18 PM

laptop screen goes dark in boot
 
On 04/21/2012 11:25 PM, Zhang Jun wrote:
> laptop: asus F3TC, amd Turion, NV-go7300
> kernel-3.0.17-r1 tuxonice
>
> screen goes dark just after I see the linux boot logo,
> when using kernel 2.6.x, I even do not use hotkey to control lcd backlight, default light is ok,
> but now, it goes dark, re-compiled kernel many times, but no luck,
>
> in kernel acpi config page, I did't see the "video" module, and seems no /proc/acpi/video/ .
>
> is there anyone have met this problem and have solution ?

If you can boot the machine with a recent rescue cd, you can see which
kernel modules are in use and then configure your own kernel to use the
same ones.

"Michael Scherer" 04-22-2012 06:53 PM

laptop screen goes dark in boot
 
did you look at the logs? if you haven't already
looked at them dmesg and /var/log/rc.log
have information that could help you pinpoint the
problem.
one of the earlier live-cds had that problem and I
got around it by starting the the cd with
"gentoo noacpi nox" options though I doubt this can
help in your case.
could you provide some more information like the
logs, the loader conf files and may be
.config of your kernel make?
*
michael
*
--
Michael Scherer
Univ.klinik f. Psychiatrie
email: michael.scherer@meduniwien.ac.at
phone:
+43 6991 941 22 54


----- Original Message -----
From:
Zhang Jun
To: gentoo-user
Sent: Sunday, 22 April, 2012 08:25
Subject: [gentoo-user] laptop screen goes
dark in boot

laptop: asus F3TC, amd Turion, NV-go7300
kernel-3.0.17-r1
tuxonice

screen goes dark just after I see the linux boot logo,
when
using kernel 2.6.x, I even do not use hotkey to control lcd backlight, default
light is ok,
but now, it goes dark, re-compiled kernel many times, but no
luck,

in kernel acpi config page, I did't see the "video" module, and
seems no /proc/acpi/video/ .

is there anyone have met this problem and
have solution ?

thanks!

Zhang Jun 04-23-2012 01:50 AM

laptop screen goes dark in boot
 
I get the dmesg log and kernel config, forgot to get the rc.log ( using windows now ).
please help to have a look on these files,
also tryed boot with different kernel parameters for acpi, only acpi=off works, but I don't think it is a good idea.

I'm using grub4dos with "kernel (hd0,7)/kernel-3.0.17-r1 root=/dev/sda9 ro quiet vga=792 gentoo=nodevfs acpi_enforce_resources=lax resume=swap:/dev/sda7", remove the "acpi_enforce_resources=lax" also not works.


thanks!

On Mon, Apr 23, 2012 at 2:53 AM, Michael Scherer <a6702894@unet.univie.ac.at> wrote:








did you look at the logs? if you haven't already
looked at them dmesg and /var/log/rc.log
have information that could help you pinpoint the
problem.
one of the earlier live-cds had that problem and I
got around it by starting the the cd with
"gentoo noacpi nox" options though I doubt this can
help in your case.
could you provide some more information like the
logs, the loader conf files and may be
.config of your kernel make?
*
michael
*
--
Michael Scherer
Univ.klinik f. Psychiatrie
email: michael.scherer@meduniwien.ac.at
phone:
+43 6991 941 22 54


----- Original Message -----
From:
Zhang Jun
To: gentoo-user
Sent: Sunday, 22 April, 2012 08:25
Subject: [gentoo-user] laptop screen goes
dark in boot

laptop: asus F3TC, amd Turion, NV-go7300
kernel-3.0.17-r1
tuxonice

screen goes dark just after I see the linux boot logo,
when
using kernel 2.6.x, I even do not use hotkey to control lcd backlight, default
light is ok,
but now, it goes dark, re-compiled kernel many times, but no
luck,

in kernel acpi config page, I did't see the "video" module, and
seems no /proc/acpi/video/ .

is there anyone have met this problem and
have solution ?

thanks!




[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.17-tuxonice-r1-20120422 (root@pc) (gcc version 4.4.5 (Gentoo 4.4.5 p1.3, pie-0.4.5) ) #1 SMP Sun Apr 22 14:01:52 CST 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdfa0000 (usable)
[ 0.000000] BIOS-e820: 00000000bdfa0000 - 00000000bdfae000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdfae000 - 00000000bdff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdff0000 - 00000000be000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: ASUSTeK Computer INC. F3Tc/F3Tc, BIOS F3TcAS.220 04/09/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbdfa0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 00B0000000 mask FFF8000000 write-back
[ 0.000000] 4 base 00B8000000 mask FFFC000000 write-back
[ 0.000000] 5 base 00BC000000 mask FFFE000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] ACPI: RSDP 000fbb20 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT bdfa0000 00040 (v01 _ASUS_ Notebook 04000809 MSFT 00000097)
[ 0.000000] ACPI: FACP bdfa0200 00084 (v02 A M I OEMFACP 04000809 MSFT 00000097)
[ 0.000000] ACPI: DSDT bdfa05f0 0916F (v01 A0427 A0427000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS bdfae000 00040
[ 0.000000] ACPI: APIC bdfa0390 00070 (v01 A M I OEMAPIC 04000809 MSFT 00000097)
[ 0.000000] ACPI: MCFG bdfa0400 0003C (v01 A M I OEMMCFG 04000809 MSFT 00000097)
[ 0.000000] ACPI: BOOT bdfa05c0 00028 (v01 A M I OEMBOOT 04000809 MSFT 00000097)
[ 0.000000] ACPI: SLIC bdfa0440 00176 (v01 _ASUS_ Notebook 04000809 MSFT 00000097)
[ 0.000000] ACPI: OEMB bdfae040 00060 (v01 A M I AMI_OEM 04000809 MSFT 00000097)
[ 0.000000] ACPI: HPET bdfa9760 00038 (v01 A M I OEMHPET0 04000809 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2151MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bdfa0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bdfa0
[ 0.000000] On node 0 totalpages: 778031
[ 0.000000] free_area_init_node: node 0, pgdat c1525a80, node_mem_map f603d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4304 pages used for memmap
[ 0.000000] HighMem zone: 546514 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at be000000 (gap: be000000:40c00000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages/cpu @f5c00000 s23488 r0 d21568 u2097152
[ 0.000000] pcpu-alloc: s23488 r0 d21568 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 771951
[ 0.000000] Kernel command line: root=/dev/sda9 ro quiet vga=792 gentoo=nodevfs acpi_enforce_resources=lax resume=swap:/dev/sda7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bdfa0)
[ 0.000000] Memory: 3080484k/3112576k available (3436k kernel code, 31640k reserved, 1871k data, 340k init, 2203272k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1530000 - 0xc1585000 ( 340 kB)
[ 0.000000] .data : 0xc135b344 - 0xc152f1c0 (1871 kB)
[ 0.000000] .text : 0xc1000000 - 0xc135b344 (3436 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1607.389 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.77 BogoMIPS (lpj=1607389)
[ 0.001012] pid_max: default: 32768 minimum: 301
[ 0.001046] Security Framework initialized
[ 0.001068] Mount-cache hash table entries: 512
[ 0.001231] Initializing cgroup subsys cpuacct
[ 0.001238] Initializing cgroup subsys freezer
[ 0.001257] CPU: Physical Processor ID: 0
[ 0.001260] CPU: Processor Core ID: 0
[ 0.001263] mce: CPU supports 5 MCE banks
[ 0.001276] using AMD E400 aware idle routine
[ 0.001367] ACPI: Core revision 20110413
[ 0.007062] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.007712] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.018153] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
[ 0.018998] Performance Events: AMD PMU driver.
[ 0.018998] ... version: 0
[ 0.018998] ... bit width: 48
[ 0.018998] ... generic registers: 4
[ 0.018998] ... value mask: 0000ffffffffffff
[ 0.018998] ... max period: 00007fffffffffff
[ 0.018998] ... fixed-purpose events: 0
[ 0.018998] ... event mask: 000000000000000f
[ 0.018998] MCE: In-kernel MCE decoding enabled.
[ 0.018998] CPU 1 irqstacks, hard=f5880000 soft=f5882000
[ 0.018998] Booting Node 0, Processors #1 Ok.
[ 0.018998] smpboot cpu 1: start_ip = 9b000
[ 0.001999] Initializing CPU#1
[ 0.089097] Brought up 2 CPUs
[ 0.089101] Total of 2 processors activated (6429.16 BogoMIPS).
[ 0.089095] System has AMD C1E enabled
[ 0.089095] Switch to broadcast mode on CPU1
[ 0.089626] Switch to broadcast mode on CPU0
[ 0.089626] PM: Registering ACPI NVS region at bdfae000 (270336 bytes)
[ 0.089626] Time: 9:04:57 Date: 04/23/12
[ 0.089626] NET: Registered protocol family 16
[ 0.090047] node 0 link 0: io port [1000, ffffff]
[ 0.090047] TOM: 00000000be000000 aka 3040M
[ 0.090047] node 0 link 0: mmio [e0000000, efffffff]
[ 0.090047] node 0 link 0: mmio [a0000, bffff]
[ 0.090047] node 0 link 0: mmio [be000000, fe0bffff]
[ 0.090047] bus: [00, ff] on node 0 link 0
[ 0.090047] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.090047] bus: 00 index 1 [mem 0xbe000000-0xffffffff]
[ 0.090049] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.090062] ACPI: bus type pci registered
[ 0.090077] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.090077] PCI: not using MMCONFIG
[ 0.090376] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.090380] PCI: Using configuration type 1 for base access
[ 0.100044] bio: create slab <bio-0> at 0
[ 0.102947] ACPI: EC: Look up EC in DSDT
[ 0.104264] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.113446] ACPI: Interpreter enabled
[ 0.113454] ACPI: (supports S0 S3 S4 S5)
[ 0.113483] ACPI: Using IOAPIC for interrupt routing
[ 0.113514] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.115373] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.115379] PCI: MMCONFIG for 0000 [bus00-7f] at [mem 0xe0000000-0xe7ffffff] (base 0xe0000000) (size reduced!)
[ 0.115383] PCI: Using MMCONFIG for extended config space
[ 0.125003] ACPI: EC: GPE = 0x20, I/O: command/status = 0x66, data = 0x62
[ 0.125032] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.125134] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.125174] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.125174] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.125174] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.125174] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.125174] pci_root PNP0A03:00: host bridge window [mem 0xbe000000-0xff77ffff]
[ 0.125187] pci 0000:00:00.0: [10de:02f7] type 0 class 0x000500
[ 0.125247] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.125287] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.125335] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.125383] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.125435] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.125483] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.125522] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.125576] pci 0000:00:02.0: [10de:02fc] type 1 class 0x000604
[ 0.125608] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125613] pci 0000:00:02.0: PME# disabled
[ 0.125632] pci 0000:00:03.0: [10de:02fd] type 1 class 0x000604
[ 0.125663] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125667] pci 0000:00:03.0: PME# disabled
[ 0.125685] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.125715] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125720] pci 0000:00:04.0: PME# disabled
[ 0.126064] pci 0000:00:09.0: [10de:0270] type 0 class 0x000500
[ 0.126267] pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601
[ 0.126342] pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05
[ 0.126394] pci 0000:00:0a.1: reg 20: [io 0x0600-0x063f]
[ 0.126406] pci 0000:00:0a.1: reg 24: [io 0x0700-0x073f]
[ 0.126442] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.126449] pci 0000:00:0a.1: PME# disabled
[ 0.126479] pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03
[ 0.126497] pci 0000:00:0b.0: reg 10: [mem 0xdc7be000-0xdc7befff]
[ 0.126558] pci 0000:00:0b.0: supports D1 D2
[ 0.126562] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126568] pci 0000:00:0b.0: PME# disabled
[ 0.126588] pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03
[ 0.126607] pci 0000:00:0b.1: reg 10: [mem 0xdc7bfc00-0xdc7bfcff]
[ 0.126672] pci 0000:00:0b.1: supports D1 D2
[ 0.126675] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126681] pci 0000:00:0b.1: PME# disabled
[ 0.126711] pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101
[ 0.126753] pci 0000:00:0d.0: reg 20: [io 0xffa0-0xffaf]
[ 0.126803] pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101
[ 0.126823] pci 0000:00:0e.0: reg 10: [io 0xd800-0xd807]
[ 0.126834] pci 0000:00:0e.0: reg 14: [io 0xd480-0xd483]
[ 0.126844] pci 0000:00:0e.0: reg 18: [io 0xd400-0xd407]
[ 0.126855] pci 0000:00:0e.0: reg 1c: [io 0xd080-0xd083]
[ 0.126865] pci 0000:00:0e.0: reg 20: [io 0xd000-0xd00f]
[ 0.126875] pci 0000:00:0e.0: reg 24: [mem 0xdc7bd000-0xdc7bdfff]
[ 0.126929] pci 0000:00:10.0: [10de:026f] type 1 class 0x000604
[ 0.127007] pci 0000:00:10.1: [10de:026c] type 0 class 0x000403
[ 0.127029] pci 0000:00:10.1: reg 10: [mem 0xdc7b8000-0xdc7bbfff]
[ 0.127098] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.127104] pci 0000:00:10.1: PME# disabled
[ 0.127139] pci 0000:00:14.0: [10de:0269] type 0 class 0x000680
[ 0.127156] pci 0000:00:14.0: reg 10: [mem 0xdc7bc000-0xdc7bcfff]
[ 0.127166] pci 0000:00:14.0: reg 14: [io 0xcc00-0xcc07]
[ 0.127216] pci 0000:00:14.0: supports D1 D2
[ 0.127220] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127225] pci 0000:00:14.0: PME# disabled
[ 0.127243] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.127266] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.127285] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.127305] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.127363] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.127369] pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.127374] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.127380] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.127411] pci 0000:00:03.0: PCI bridge to [bus 02-03]
[ 0.127417] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.127422] pci 0000:00:03.0: bridge window [mem 0xdc800000-0xdcffffff]
[ 0.127428] pci 0000:00:03.0: bridge window [mem 0xbe000000-0xbfffffff 64bit pref]
[ 0.127468] pci 0000:04:00.0: [10de:01d7] type 0 class 0x000300
[ 0.127479] pci 0000:04:00.0: reg 10: [mem 0xde000000-0xdeffffff]
[ 0.127492] pci 0000:04:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.127503] pci 0000:04:00.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit]
[ 0.127517] pci 0000:04:00.0: reg 30: [mem 0xdfee0000-0xdfefffff pref]
[ 0.127544] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.127554] pci 0000:00:04.0: PCI bridge to [bus 04-04]
[ 0.127559] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.127564] pci 0000:00:04.0: bridge window [mem 0xdd000000-0xdfefffff]
[ 0.127570] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.127613] pci 0000:05:01.0: [1180:0832] type 0 class 0x000c00
[ 0.127629] pci 0000:05:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.127633] pci 0000:05:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.127648] pci 0000:05:01.0: reg 10: [mem 0xdfffe800-0xdfffefff]
[ 0.127721] pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
[ 0.127727] pci 0000:05:01.0: PME# disabled
[ 0.127747] pci 0000:05:01.1: [1180:0822] type 0 class 0x000805
[ 0.127767] pci 0000:05:01.1: reg 10: [mem 0xdffff400-0xdffff4ff]
[ 0.127839] pci 0000:05:01.1: supports D1 D2
[ 0.127842] pci 0000:05:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127848] pci 0000:05:01.1: PME# disabled
[ 0.127868] pci 0000:05:01.2: [1180:0592] type 0 class 0x000880
[ 0.127888] pci 0000:05:01.2: reg 10: [mem 0xdffffc00-0xdffffcff]
[ 0.127960] pci 0000:05:01.2: supports D1 D2
[ 0.127963] pci 0000:05:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127969] pci 0000:05:01.2: PME# disabled
[ 0.128028] pci 0000:00:10.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.128034] pci 0000:00:10.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.128040] pci 0000:00:10.0: bridge window [mem 0xdff00000-0xdfffffff]
[ 0.128046] pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.128050] pci 0000:00:10.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.128054] pci 0000:00:10.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.128059] pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.128063] pci 0000:00:10.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.128067] pci 0000:00:10.0: bridge window [mem 0xbe000000-0xff77ffff] (subtractive decode)
[ 0.128082] pci_bus 0000:00: on NUMA node 0
[ 0.128087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.128266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.128324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.128412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.128455] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.128461] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.128464] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.140120] ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *10
[ 0.140227] ACPI: PCI Interrupt Link [LNKB] (IRQs 17) *11
[ 0.140331] ACPI: PCI Interrupt Link [LNKC] (IRQs 16) *0, disabled.
[ 0.140435] ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *0, disabled.
[ 0.140538] ACPI: PCI Interrupt Link [LNEA] (IRQs 18) *11
[ 0.140642] ACPI: PCI Interrupt Link [LNEB] (IRQs 19) *0, disabled.
[ 0.140747] ACPI: PCI Interrupt Link [LNEC] (IRQs 5) *0, disabled.
[ 0.141077] ACPI: PCI Interrupt Link [LNED] (IRQs 11) *0, disabled.
[ 0.141182] ACPI: PCI Interrupt Link [LUB0] (IRQs 10) *11
[ 0.141285] ACPI: PCI Interrupt Link [LUB2] (IRQs 20) *7
[ 0.141389] ACPI: PCI Interrupt Link [LMAC] (IRQs 21) *5
[ 0.141493] ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *5
[ 0.141598] ACPI: PCI Interrupt Link [LACI] (IRQs 22) *0, disabled.
[ 0.141704] ACPI: PCI Interrupt Link [LMC9] (IRQs 7) *0, disabled.
[ 0.141810] ACPI: PCI Interrupt Link [LSMB] (IRQs 7) *5
[ 0.141914] ACPI: PCI Interrupt Link [LPMU] (IRQs 7) *10
[ 0.142024] ACPI: PCI Interrupt Link [LSA0] (IRQs 23) *10
[ 0.142129] ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *0, disabled.
[ 0.142262] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.142295] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.142295] vgaarb: loaded
[ 0.142295] vgaarb: bridge control possible 0000:04:00.0
[ 0.142295] SCSI subsystem initialized
[ 0.142295] libata version 3.00 loaded.
[ 0.143034] usbcore: registered new interface driver usbfs
[ 0.143036] usbcore: registered new interface driver hub
[ 0.143036] usbcore: registered new device driver usb
[ 0.143036] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.143036] PCI: Using ACPI for IRQ routing
[ 0.143056] PCI: pci_cache_line_size set to 64 bytes
[ 0.143157] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.143162] reserve RAM buffer: 00000000bdfa0000 - 00000000bfffffff
[ 0.144017] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.144028] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.144034] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.148042] Switching to clocksource hpet
[ 0.148886] Switched to NOHz mode on CPU #1
[ 0.148891] Switched to NOHz mode on CPU #0
[ 0.157829] pnp: PnP ACPI init
[ 0.157839] ACPI: bus type pnp registered
[ 0.157983] pnp 00:00: [bus 00-ff]
[ 0.157987] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.157990] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.157995] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.157999] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.158019] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.158022] pnp 00:00: [mem 0xbe000000-0xff77ffff window]
[ 0.158180] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.158218] pnp 00:01: [dma 4]
[ 0.158222] pnp 00:01: [io 0x0000-0x000f]
[ 0.158226] pnp 00:01: [io 0x0081-0x0083]
[ 0.158230] pnp 00:01: [io 0x0087]
[ 0.158237] pnp 00:01: [io 0x0089-0x008b]
[ 0.158240] pnp 00:01: [io 0x008f]
[ 0.158243] pnp 00:01: [io 0x00c0-0x00df]
[ 0.158345] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.158360] pnp 00:02: [io 0x0070-0x0071]
[ 0.158380] pnp 00:02: [irq 8]
[ 0.158479] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.158519] pnp 00:03: [io 0x0060]
[ 0.158522] pnp 00:03: [io 0x0064]
[ 0.158534] pnp 00:03: [irq 1]
[ 0.158636] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.158710] pnp 00:04: [irq 12]
[ 0.158815] pnp 00:04: Plug and Play ACPI device, IDs AUI1303 PNP0f13 (active)
[ 0.158828] pnp 00:05: [io 0x0061]
[ 0.158929] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.158942] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.158954] pnp 00:06: [irq 13]
[ 0.159074] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.159105] pnp 00:07: [io 0x025c-0x025f]
[ 0.159249] system 00:07: [io 0x025c-0x025f] has been reserved
[ 0.159253] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.159280] pnp 00:08: [mem 0x00000000-0xffffffff disabled]
[ 0.159405] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.159710] pnp 00:09: [mem 0x000d0000-0x000d3fff window]
[ 0.159713] pnp 00:09: [mem 0x000d4000-0x000d7fff window]
[ 0.159717] pnp 00:09: [mem 0x000de000-0x000dffff window]
[ 0.159721] pnp 00:09: [io 0x0010-0x001f]
[ 0.159724] pnp 00:09: [io 0x0022-0x003f]
[ 0.159727] pnp 00:09: [io 0x0044-0x005f]
[ 0.159730] pnp 00:09: [io 0x0062-0x0063]
[ 0.159734] pnp 00:09: [io 0x0065-0x006f]
[ 0.159737] pnp 00:09: [io 0x0072-0x007f]
[ 0.159740] pnp 00:09: [io 0x0080]
[ 0.159744] pnp 00:09: [io 0x0084-0x0086]
[ 0.159747] pnp 00:09: [io 0x0088]
[ 0.159750] pnp 00:09: [io 0x008c-0x008e]
[ 0.159753] pnp 00:09: [io 0x0090-0x009f]
[ 0.159757] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.159760] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.159763] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.159766] pnp 00:09: [io 0x0800-0x080f]
[ 0.159770] pnp 00:09: [io 0x0500-0x057f]
[ 0.159773] pnp 00:09: [io 0x0580-0x05ff]
[ 0.159776] pnp 00:09: [io 0x0800-0x087f]
[ 0.159779] pnp 00:09: [io 0x0880-0x08ff]
[ 0.159783] pnp 00:09: [io 0x0900-0x097f]
[ 0.159787] pnp 00:09: [io 0x0980-0x09ff]
[ 0.159790] pnp 00:09: [mem 0x00000000-0xffffffff disabled]
[ 0.159793] pnp 00:09: [mem 0xfee01000-0xfeefffff]
[ 0.159952] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.159957] system 00:09: [io 0x0800-0x080f] has been reserved
[ 0.159961] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.159965] system 00:09: [io 0x0580-0x05ff] has been reserved
[ 0.159970] system 00:09: [io 0x0800-0x087f] could not be reserved
[ 0.159975] system 00:09: [io 0x0880-0x08ff] has been reserved
[ 0.159979] system 00:09: [io 0x0900-0x097f] has been reserved
[ 0.159984] system 00:09: [io 0x0980-0x09ff] has been reserved
[ 0.159989] system 00:09: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.159993] system 00:09: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.159998] system 00:09: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.160060] system 00:09: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.160065] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160115] pnp 00:0a: [mem 0xfed00000-0xfed00fff]
[ 0.160232] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.160297] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.160301] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.160430] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.160435] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.160439] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160543] pnp 00:0c: [mem 0xe0000000-0xe7ffffff]
[ 0.160667] system 00:0c: [mem 0xe0000000-0xe7ffffff] has been reserved
[ 0.160672] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160889] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.160893] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.160896] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.160900] pnp 00:0d: [mem 0x00100000-0xbdffffff]
[ 0.160903] pnp 00:0d: [mem 0xff780000-0xffffffff]
[ 0.161070] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.161075] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.161079] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.161084] system 00:0d: [mem 0x00100000-0xbdffffff] could not be reserved
[ 0.161089] system 00:0d: [mem 0xff780000-0xffffffff] could not be reserved
[ 0.161093] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.161493] pnp: PnP ACPI: found 14 devices
[ 0.161496] ACPI: ACPI bus type pnp unregistered
[ 0.196253] PCI: max bus depth: 1 pci_try_num: 2
[ 0.196278] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.196282] pci 0000:00:02.0: bridge window [io disabled]
[ 0.196287] pci 0000:00:02.0: bridge window [mem disabled]
[ 0.196291] pci 0000:00:02.0: bridge window [mem pref disabled]
[ 0.196296] pci 0000:00:03.0: PCI bridge to [bus 02-03]
[ 0.196301] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.196306] pci 0000:00:03.0: bridge window [mem 0xdc800000-0xdcffffff]
[ 0.196311] pci 0000:00:03.0: bridge window [mem 0xbe000000-0xbfffffff 64bit pref]
[ 0.196316] pci 0000:00:04.0: PCI bridge to [bus 04-04]
[ 0.196320] pci 0000:00:04.0: bridge window [io disabled]
[ 0.196324] pci 0000:00:04.0: bridge window [mem 0xdd000000-0xdfefffff]
[ 0.196329] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.196335] pci 0000:00:10.0: PCI bridge to [bus 05-05]
[ 0.196338] pci 0000:00:10.0: bridge window [io disabled]
[ 0.196345] pci 0000:00:10.0: bridge window [mem 0xdff00000-0xdfffffff]
[ 0.196350] pci 0000:00:10.0: bridge window [mem pref disabled]
[ 0.196364] pci 0000:00:02.0: setting latency timer to 64
[ 0.196371] pci 0000:00:03.0: setting latency timer to 64
[ 0.196377] pci 0000:00:04.0: setting latency timer to 64
[ 0.196384] pci 0000:00:10.0: setting latency timer to 64
[ 0.196389] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.196393] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.196396] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.196400] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.196404] pci_bus 0000:00: resource 8 [mem 0xbe000000-0xff77ffff]
[ 0.196408] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.196412] pci_bus 0000:02: resource 1 [mem 0xdc800000-0xdcffffff]
[ 0.196417] pci_bus 0000:02: resource 2 [mem 0xbe000000-0xbfffffff 64bit pref]
[ 0.196421] pci_bus 0000:04: resource 1 [mem 0xdd000000-0xdfefffff]
[ 0.196425] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.196429] pci_bus 0000:05: resource 1 [mem 0xdff00000-0xdfffffff]
[ 0.196433] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.196437] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.196441] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.196445] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.196449] pci_bus 0000:05: resource 8 [mem 0xbe000000-0xff77ffff]
[ 0.196502] NET: Registered protocol family 2
[ 0.196569] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.196881] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.197829] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.198328] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.198332] TCP reno registered
[ 0.198337] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.198353] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.198473] NET: Registered protocol family 1
[ 0.198613] RPC: Registered named UNIX socket transport module.
[ 0.198616] RPC: Registered udp transport module.
[ 0.198619] RPC: Registered tcp transport module.
[ 0.198621] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.198652] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.198659] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.198712] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.198744] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.199120] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.262152] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.262222] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.262295] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.262323] pci 0000:04:00.0: Boot video device
[ 0.262335] PCI: CLS 64 bytes, default 64
[ 0.262356] Simple Boot Flag at 0x4c set to 0x1
[ 0.264204] microcode: CPU0: family 15 not supported
[ 0.274722] highmem bounce pool size: 64 pages
[ 0.283320] fuse init (API version 7.16)
[ 0.283614] msgmni has been set to 1713
[ 0.283957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.283961] io scheduler noop registered
[ 0.283964] io scheduler deadline registered (default)
[ 0.284166] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.284203] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.284311] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.284339] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
[ 0.284442] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.284471] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
[ 0.284792] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.284908] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.322932] Non-volatile memory driver v1.3
[ 0.322972] Linux agpgart interface v0.103
[ 0.323731] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.323734] vesafb: protected mode interface info at c000:c5f0
[ 0.323739] vesafb: pmi: set display start = c00cc626, set palette = c00cc690
[ 0.323741] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 0.323758] vesafb: scrolling: redraw
[ 0.323762] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.324520] vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 6144k, total 131072k
[ 0.354945] Console: switching to colour frame buffer device 128x48
[ 0.382504] fb0: VESA VGA frame buffer device
[ 0.382747] ACPI: AC Adapter [AC0] (on-line)
[ 0.382968] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.382977] ACPI: Sleep Button [SLPB]
[ 0.383125] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.385138] ACPI: Lid Switch [LID]
[ 0.385299] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.385307] ACPI: Power Button [PWRB]
[ 0.385455] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.385460] ACPI: Power Button [PWRF]
[ 0.385637] ACPI: acpi_idle registered with cpuidle
[ 0.385672] ACPI: processor limited to max C-state 1
[ 0.388889] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.388892] ACPI: Thermal Zone [TZ00] (60 C)
[ 0.392866] brd: module loaded
[ 0.395246] loop: module loaded
[ 0.396311] sata_nv 0000:00:0e.0: version 3.5
[ 0.396527] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.396552] sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.396556] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 0.396625] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 0.397838] scsi0 : sata_nv
[ 0.398216] scsi1 : sata_nv
[ 0.398519] ata1: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 23
[ 0.398525] ata2: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 23
[ 0.398853] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.399084] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 0.399107] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 0.399116] forcedeth 0000:00:14.0: setting latency timer to 64
[ 0.412412] ACPI: Battery Slot [BAT0] (battery present)
[ 0.852067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.855326] ata1.00: ATA-8: WDC WD3200BEVT-60ZCT1, 13.01A13, max UDMA/100
[ 0.855331] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.858318] ata1.00: configured for UDMA/100
[ 0.858496] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 13.0 PQ: 0 ANSI: 5
[ 0.858854] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.858909] sd 0:0:0:0: [sda] Write Protect is off
[ 0.858913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.858944] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.858952] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.920778] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:d5:be:93
[ 0.920784] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 0.920880] PPP generic driver version 2.4.2
[ 0.921075] PPP Deflate Compression module registered
[ 0.921078] PPP BSD Compression module registered
[ 0.921081] NET: Registered protocol family 24
[ 0.921291] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.921296] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 0.921530] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 0.921554] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 0.921577] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 0.921582] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 0.921607] drivers/usb/core/inode.c: creating file 'devices'
[ 0.921621] drivers/usb/core/inode.c: creating file '001'
[ 0.921729] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 0.921741] ehci_hcd 0000:00:0b.1: reset hcs_params 0x101888 dbg=1 cc=1 pcc=8 !ppc ports=8
[ 0.921755] ehci_hcd 0000:00:0b.1: reset portroute 0 0 0 0 0 0 0 0
[ 0.921760] ehci_hcd 0000:00:0b.1: reset hcc_params a086 caching frame 256/512/1024 park
[ 0.921785] ehci_hcd 0000:00:0b.1: park 0
[ 0.921795] ehci_hcd 0000:00:0b.1: debug port 1
[ 0.921803] ehci_hcd 0000:00:0b.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 0.921815] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 0.921818] ehci_hcd 0000:00:0b.1: supports USB remote wakeup
[ 0.921849] ehci_hcd 0000:00:0b.1: irq 20, io mem 0xdc7bfc00
[ 0.921857] ehci_hcd 0000:00:0b.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 0.921868] ehci_hcd 0000:00:0b.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 0.927051] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 0.927100] usb usb1: default language 0x0409
[ 0.927109] usb usb1: udev 1, busnum 1, minor = 0
[ 0.927113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.927117] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.927121] usb usb1: Product: EHCI Host Controller
[ 0.927124] usb usb1: Manufacturer: Linux 3.0.17-tuxonice-r1-20120422 ehci_hcd
[ 0.927127] usb usb1: SerialNumber: 0000:00:0b.1
[ 0.927279] usb usb1: usb_probe_device
[ 0.927284] usb usb1: configuration #1 chosen from 1 choice
[ 0.927294] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.927403] hub 1-0:1.0: usb_probe_interface
[ 0.927407] hub 1-0:1.0: usb_probe_interface - got id
[ 0.927411] hub 1-0:1.0: USB hub found
[ 0.927417] hub 1-0:1.0: 8 ports detected
[ 0.927421] hub 1-0:1.0: standalone hub
[ 0.927423] hub 1-0:1.0: no power switching (usb 1.0)
[ 0.927426] hub 1-0:1.0: individual port over-current protection
[ 0.927430] hub 1-0:1.0: power on to power good time: 20ms
[ 0.927436] hub 1-0:1.0: local power source is good
[ 0.927440] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 0.927477] drivers/usb/core/inode.c: creating file '001'
[ 0.927606] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.927609] ohci_hcd: block sizes: ed 64 td 64
[ 0.927816] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 10
[ 0.927832] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 10 (level, low) -> IRQ 10
[ 0.927846] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 0.927851] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 0.927858] drivers/usb/core/inode.c: creating file '002'
[ 0.927970] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.927991] ohci_hcd 0000:00:0b.0: created debug files
[ 0.927994] ohci_hcd 0000:00:0b.0: supports USB remote wakeup
[ 0.928040] ohci_hcd 0000:00:0b.0: irq 10, io mem 0xdc7be000
[ 0.981066] ohci_hcd 0000:00:0b.0: OHCI controller state
[ 0.981072] ohci_hcd 0000:00:0b.0: OHCI 1.0, NO legacy support registers
[ 0.981077] ohci_hcd 0000:00:0b.0: control 0x683 RWE RWC HCFS=operational CBSR=3
[ 0.981083] ohci_hcd 0000:00:0b.0: cmdstatus 0x00000 SOC=0
[ 0.981088] ohci_hcd 0000:00:0b.0: intrstatus 0x00000004 SF
[ 0.981093] ohci_hcd 0000:00:0b.0: intrenable 0x8000004a MIE RHSC RD WDH
[ 0.981104] ohci_hcd 0000:00:0b.0: hcca frame #0003
[ 0.981110] ohci_hcd 0000:00:0b.0: roothub.a 01001208 POTPGT=1 NOCP NPS NDP=8(8)
[ 0.981115] ohci_hcd 0000:00:0b.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 0.981121] ohci_hcd 0000:00:0b.0: roothub.status 00008000 DRWE
[ 0.981127] ohci_hcd 0000:00:0b.0: roothub.portstatus [0] 0x00000100 PPS
[ 0.981134] ohci_hcd 0000:00:0b.0: roothub.portstatus [1] 0x00000100 PPS
[ 0.981140] ohci_hcd 0000:00:0b.0: roothub.portstatus [2] 0x00000100 PPS
[ 0.981146] ohci_hcd 0000:00:0b.0: roothub.portstatus [3] 0x00000100 PPS
[ 0.981152] ohci_hcd 0000:00:0b.0: roothub.portstatus [4] 0x00000100 PPS
[ 0.981158] ohci_hcd 0000:00:0b.0: roothub.portstatus [5] 0x00000100 PPS
[ 0.981164] ohci_hcd 0000:00:0b.0: roothub.portstatus [6] 0x00000100 PPS
[ 0.981170] ohci_hcd 0000:00:0b.0: roothub.portstatus [7] 0x00000100 PPS
[ 0.981183] usb usb2: default language 0x0409
[ 0.981192] usb usb2: udev 1, busnum 2, minor = 128
[ 0.981196] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.981200] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.981203] usb usb2: Product: OHCI Host Controller
[ 0.981207] usb usb2: Manufacturer: Linux 3.0.17-tuxonice-r1-20120422 ohci_hcd
[ 0.981211] usb usb2: SerialNumber: 0000:00:0b.0
[ 0.981355] usb usb2: usb_probe_device
[ 0.981358] usb usb2: configuration #1 chosen from 1 choice
[ 0.981368] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 0.981468] hub 2-0:1.0: usb_probe_interface
[ 0.981471] hub 2-0:1.0: usb_probe_interface - got id
[ 0.981474] hub 2-0:1.0: USB hub found
[ 0.981483] hub 2-0:1.0: 8 ports detected
[ 0.981485] hub 2-0:1.0: standalone hub
[ 0.981489] hub 2-0:1.0: no power switching (usb 1.0)
[ 0.981491] hub 2-0:1.0: no over-current protection
[ 0.981494] hub 2-0:1.0: power on to power good time: 2ms
[ 0.981501] hub 2-0:1.0: local power source is good
[ 0.981505] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 0.981526] drivers/usb/core/inode.c: creating file '001'
[ 0.981570] ehci_hcd 0000:00:0b.1: HS companion for 0000:00:0b.0
[ 0.981666] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.981796] Initializing USB Mass Storage driver...
[ 0.981896] usbcore: registered new interface driver usb-storage
[ 0.981898] USB Mass Storage support registered.
[ 0.981997] usbcore: registered new interface driver libusual
[ 0.982240] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.983707] i8042: Detected active multiplexing controller, rev 1.1
[ 0.984601] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.984609] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.984644] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.984679] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.984723] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.984916] mousedev: PS/2 mouse device common for all mice
[ 0.985394] rtc_cmos 00:02: RTC can wake from S4
[ 0.985579] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.985629] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.985719] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 0.985894] cpuidle: using governor ladder
[ 0.985897] cpuidle: using governor menu
[ 0.987134] usbcore: registered new interface driver usbhid
[ 0.987137] usbhid: USB HID core driver
[ 0.987237] asus_laptop: Asus Laptop Support version 0.42
[ 0.987381] asus_laptop: F3Tc model detected
[ 0.991630] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input4
[ 0.991897] Registered led device: asus::mail
[ 0.992904] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 0.992931] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 0.992935] hda_intel: Disabling MSI
[ 0.992986] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 0.995391] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[ 0.996684] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.017698] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.027052] ehci_hcd 0000:00:0b.1: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT
[ 1.027057] hub 1-0:1.0: port 2: status 0501 change 0001
[ 1.081079] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000
[ 1.127070] hub 1-0:1.0: state 7 ports 8 chg 0004 evt 0000
[ 1.127083] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 1.127095] ehci_hcd 0000:00:0b.1: port 2 low speed --> companion
[ 1.162059] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.178058] ehci_hcd 0000:00:0b.1: GetStatus port:2 status 003402 0 ACK POWER OWNER sig=k CSC
[ 1.178079] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0004
[ 1.178086] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0004
[ 1.178094] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 1.178100] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 1.282051] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 1.344049] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 1.346065] hda_codec: ALC660-VD: BIOS auto-probing.
[ 1.395046] usb 2-2: new low speed USB device number 2 using ohci_hcd
[ 1.459056] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 1.467278] ALSA device list:
[ 1.467283] #0: HDA NVidia at 0xdc7b8000 irq 22
[ 1.467286] Netfilter messages via NETLINK v0.30.
[ 1.467309] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.467751] ctnetlink v0.93: registering with nfnetlink.
[ 1.468353] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.468405] TCP cubic registered
[ 1.468410] NET: Registered protocol family 17
[ 1.468425] Registering the dns_resolver key type
[ 1.468457] Using IPI No-Shortcut mode
[ 1.468757] TuxOnIce 3.2 (http://tuxonice.net)
[ 1.469107] TuxOnIce: No image found.
[ 1.469627] PM: Checking hibernation image partition swap:/dev/sda7
[ 1.469632] PM: Hibernation image not present or could not be loaded.
[ 1.470030] Magic number: 8:182:71
[ 1.532095] usb 2-2: skipped 1 descriptor after interface
[ 1.535094] usb 2-2: default language 0x0409
[ 1.541104] usb 2-2: udev 2, busnum 2, minor = 129
[ 1.541108] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 1.541112] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.541116] usb 2-2: Product: USB Optical Mouse
[ 1.541119] usb 2-2: Manufacturer: PixArt
[ 1.541288] usb 2-2: usb_probe_device
[ 1.541293] usb 2-2: configuration #1 chosen from 1 choice
[ 1.544096] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 1.544234] usbhid 2-2:1.0: usb_probe_interface
[ 1.544238] usbhid 2-2:1.0: usb_probe_interface - got id
[ 1.544465] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 1.544478] VFS: Mounted root (ext4 filesystem) readonly on device 8:9.
[ 1.544524] Freeing unused kernel memory: 340k freed
[ 1.544809] Write protecting the kernel text: 3440k
[ 1.544845] Write protecting the kernel read-only data: 1628k
[ 1.587827] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input6
[ 1.588204] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:0b.0-2/input0
[ 1.588228] drivers/usb/core/inode.c: creating file '002'
[ 1.588261] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0004
[ 1.769047] CE: hpet increased min_delta_ns to 11520 nsec
[ 3.978818] udev: starting version 160
[ 3.978863] udevd (999): /proc/999/oom_adj is deprecated, please use /proc/999/oom_score_adj instead.
[ 4.259587] sdhci: Secure Digital Host Controller Interface driver
[ 4.259591] sdhci: Copyright(c) Pierre Ossman
[ 4.272218] sdhci-pci 0000:05:01.1: SDHCI controller found [1180:0822] (rev 19)
[ 4.272454] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
[ 4.272478] sdhci-pci 0000:05:01.1: PCI INT B -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
[ 4.272513] sdhci-pci 0000:05:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4.272581] Registered led device: mmc0::
[ 4.272624] mmc0: SDHCI controller on PCI [0000:05:01.1] using DMA
[ 6.722558] EXT4-fs (sda9): re-mounted. Opts: (null)
[ 6.868541] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 6.929392] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 6.972428] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
[ 7.921090] Adding 1060252k swap on /dev/sda7. Priority:-1 extents:1 across:1060252k
#
# Automatically generated make config: don't edit
# Linux/i386 3.0.17-tuxonice-r1 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-20120422"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="pc"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda7"
CONFIG_TOI_CORE=y

#
# Image Storage (you need at least one allocator)
#
CONFIG_TOI_FILE=y
CONFIG_TOI_SWAP=y

#
# General Options
#
CONFIG_TOI_CRYPTO=m

#
# No compression support available without Cryptoapi support.
#
CONFIG_TOI_USERUI=y
CONFIG_TOI_USERUI_DEFAULT_PATH="/sbin/tuxoniceui_text"
CONFIG_TOI_DEFAULT_IMAGE_SIZE_LIMIT=-2
# CONFIG_TOI_KEEP_IMAGE is not set
CONFIG_TOI_REPLACE_SWSUSP=y
# CONFIG_TOI_IGNORE_LATE_INITCALL is not set
CONFIG_TOI_DEFAULT_WAIT=25
CONFIG_TOI_DEFAULT_EXTRA_PAGES_ALLOWANCE=2000
# CONFIG_TOI_CHECKSUM is not set
CONFIG_TOI=y
CONFIG_TOI_EXPORTS=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CON

Florian Philipp 04-23-2012 07:21 AM

laptop screen goes dark in boot
 
Please try to deactivate everything related to framebuffer and specific
video hardware in your kernel config. See if it helps, then activate one
option at a time until it breaks again.

Specifically:
CONFIG_FB=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_VESA=y
CONFIG_FRAMEBUFFER_CONSOLE=y

The only thing you really need for the start is CONFIG_VGA_CONSOLE.

Hope this helps,
Florian Philipp

P.S.: Please don't top-post in the future. Use an email client that
allows you to write your response below the text you quote. That makes
large threads easier to read.

Am 23.04.2012 03:50, schrieb Zhang Jun:
> I get the dmesg log and kernel config, forgot to get the rc.log ( using
> windows now ).
> please help to have a look on these files,
> also tryed boot with different kernel parameters for acpi, only acpi=off
> works, but I don't think it is a good idea.
> I'm using grub4dos with "kernel (hd0,7)/kernel-3.0.17-r1 root=/dev/sda9
> ro quiet vga=792 gentoo=nodevfs acpi_enforce_resources=lax
> resume=swap:/dev/sda7", remove the "acpi_enforce_resources=lax" also not
> works.
>
> thanks!
>
> On Mon, Apr 23, 2012 at 2:53 AM, Michael Scherer
> <a6702894@unet.univie.ac.at <mailto:a6702894@unet.univie.ac.at>> wrote:
>
> __
> did you look at the logs? if you haven't already looked at them
> dmesg and /var/log/rc.log
> have information that could help you pinpoint the problem.
> one of the earlier live-cds had that problem and I got around it by
> starting the the cd with
> "gentoo noacpi nox" options though I doubt this can help in your case.
> could you provide some more information like the logs, the loader
> conf files and may be
> .config of your kernel make?
>
> michael
>
> --
> Michael Scherer
> Univ.klinik f. Psychiatrie
> email: michael.scherer@meduniwien.ac.at
> <mailto:michael.scherer@meduniwien.ac.at>
> phone: +43 6991 941 22 54
>
> ----- Original Message -----
> *From:* Zhang Jun <mailto:gb2313@gmail.com>
> *To:* gentoo-user <mailto:gentoo-user@lists.gentoo.org>
> *Sent:* Sunday, 22 April, 2012 08:25
> *Subject:* [gentoo-user] laptop screen goes dark in boot
>
> laptop: asus F3TC, amd Turion, NV-go7300
> kernel-3.0.17-r1 tuxonice
>
> screen goes dark just after I see the linux boot logo,
> when using kernel 2.6.x, I even do not use hotkey to control lcd
> backlight, default light is ok,
> but now, it goes dark, re-compiled kernel many times, but no luck,
>
> in kernel acpi config page, I did't see the "video" module, and
> seems no /proc/acpi/video/ .
>
> is there anyone have met this problem and have solution ?
>
> thanks!
>
>

"Michael Scherer" 04-23-2012 04:57 PM

laptop screen goes dark in boot
 
unless you have solved the problem already, could
you please
post the rc.log, too?
*
michael
*
--
Michael Scherer
Univ.klinik f. Psychiatrie
email: michael.scherer@meduniwien.ac.at
phone:
+43 6991 941 22 54


----- Original Message -----
From:
Zhang Jun
To: gentoo-user@lists.gentoo.org

Sent: Monday, 23 April, 2012 03:50
Subject: Re: [gentoo-user] laptop screen
goes dark in boot


I get the dmesg log and kernel config, forgot to get
the rc.log ( using windows now ).
please help to have a look on these
files,
also tryed boot with different kernel parameters for acpi, only
acpi=off works, but I don't think it is a good idea.
I'm using grub4dos
with "kernel (hd0,7)/kernel-3.0.17-r1 root=/dev/sda9 ro quiet vga=792
gentoo=nodevfs acpi_enforce_resources=lax resume=swap:/dev/sda7", remove the
"acpi_enforce_resources=lax" also not works.

thanks!


On Mon, Apr 23, 2012 at 2:53 AM, Michael Scherer <a6702894@unet.univie.ac.at> wrote:



did you look at the logs? if you haven't already
looked at them dmesg and /var/log/rc.log
have information that could help you pinpoint the
problem.
one of the earlier live-cds had that problem and I got
around it by starting the the cd with
"gentoo noacpi nox" options though I doubt this can
help in your case.
could you provide some more information like the logs,
the loader conf files and may be
.config of your kernel make?
*
michael
*
--
Michael Scherer
Univ.klinik f. Psychiatrie
email: michael.scherer@meduniwien.ac.at
phone: +43 6991 941 22
54




----- Original Message -----
From: Zhang
Jun
To: gentoo-user

Sent: Sunday, 22 April, 2012
08:25
Subject: [gentoo-user] laptop screen
goes dark in boot

laptop: asus F3TC, amd Turion,
NV-go7300
kernel-3.0.17-r1 tuxonice

screen goes dark just after
I see the linux boot logo,
when using kernel 2.6.x, I even do not use
hotkey to control lcd backlight, default light is ok,
but now, it goes
dark, re-compiled kernel many times, but no luck,

in kernel acpi
config page, I did't see the "video" module, and seems no
/proc/acpi/video/ .

is there anyone have met this problem and have
solution
?

thanks!

Zhang Jun 04-24-2012 01:33 PM

laptop screen goes dark in boot
 
On Tue, Apr 24, 2012 at 12:57 AM, Michael Scherer <a6702894@unet.univie.ac.at> wrote:








unless you have solved the problem already, could
you please
post the rc.log, too?
*
michael
*
--
Michael Scherer
Univ.klinik f. Psychiatrie
email: michael.scherer@meduniwien.ac.at
phone:
+43 6991 941 22 54


----- Original Message -----
From:
Zhang Jun
To: gentoo-user@lists.gentoo.org

Sent: Monday, 23 April, 2012 03:50
Subject: Re: [gentoo-user] laptop screen
goes dark in boot


I get the dmesg log and kernel config, forgot to get
the rc.log ( using windows now ).
please help to have a look on these
files,
also tryed boot with different kernel parameters for acpi, only
acpi=off works, but I don't think it is a good idea.
I'm using grub4dos
with "kernel (hd0,7)/kernel-3.0.17-r1 root=/dev/sda9 ro quiet vga=792
gentoo=nodevfs acpi_enforce_resources=lax resume=swap:/dev/sda7", remove the
"acpi_enforce_resources=lax" also not works.

thanks!


On Mon, Apr 23, 2012 at 2:53 AM, Michael Scherer <a6702894@unet.univie.ac.at> wrote:



did you look at the logs? if you haven't already
looked at them dmesg and /var/log/rc.log
have information that could help you pinpoint the
problem.
one of the earlier live-cds had that problem and I got
around it by starting the the cd with
"gentoo noacpi nox" options though I doubt this can
help in your case.
could you provide some more information like the logs,
the loader conf files and may be
.config of your kernel make?
*
michael
*
--
Michael Scherer
Univ.klinik f. Psychiatrie
email: michael.scherer@meduniwien.ac.at
phone: +43 6991 941 22
54




----- Original Message -----
From: Zhang
Jun
To: gentoo-user

Sent: Sunday, 22 April, 2012
08:25
Subject: [gentoo-user] laptop screen
goes dark in boot

laptop: asus F3TC, amd Turion,
NV-go7300
kernel-3.0.17-r1 tuxonice

screen goes dark just after
I see the linux boot logo,
when using kernel 2.6.x, I even do not use
hotkey to control lcd backlight, default light is ok,
but now, it goes
dark, re-compiled kernel many times, but no luck,

in kernel acpi
config page, I did't see the "video" module, and seems no
/proc/acpi/video/ .

is there anyone have met this problem and have
solution
?

thanks!



sorry, I didn't get time to test these ideads,

I just turn on /etc/r.conf 'rc_logger="YES"', here is rc.log


All times are GMT. The time now is 04:40 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.