FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Gentoo > Gentoo User

 
 
LinkBack Thread Tools
 
Old 01-20-2011, 02:35 AM
 
Default Keymap used for bttv (dvbt) ???

Hi,

while searching for these damned hickups with my Avermedia dvb-t card
I found this in the kernel log:

bttv: driver version 0.9.18 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv 0000:01:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 21, latency: 64, mmio: 0xd5fff000
bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00d7710f [init]
bttv0: tuner absent
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .
serial 0000:03:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40
Couldn't register serial port 0000:03:00.1: -28
. ok
bttv0: add subdevice "dvb0"
*** IR keymap rc-avermedia-dvbt not found
*** Registered IR keymap rc-empty
input: bttv IR (card=123) as /devices/pci0000:00/0000:00:14.4/0000:01:06.0/rc/rc0/input6
rc0: bttv IR (card=123) as /devices/pci0000:00/0000:00:14.4/0000:01:06.0/rc/rc0
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878 0000:01:06.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
bt878(0): Bt878 (rev 17) at 01:06.1, irq: 21, latency: 64, memory: 0xd5ffe000


What the heck is this? I have no IR remote control with my dvb-t card
... I am using vlc/mplayer and my keyboard...

And...if this is missing...where can I get it and what will it cost?


Best regards,
mcc
 
Old 01-20-2011, 07:15 AM
Daniel Pielmeier
 
Default Keymap used for bttv (dvbt) ???

2011/1/20 <meino.cramer@gmx.de>:
>
> * *bttv: driver version 0.9.18 loaded
> * *bttv: using 8 buffers with 2080k (520 pages) each for capture
> * *bttv: Bt8xx card found (0).
> * *bttv 0000:01:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> * *bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 21, latency: 64, mmio: 0xd5fff000
> * *bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
> * *bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
> * *bttv0: gpio: en=00000000, out=00000000 in=00d7710f [init]
> * *bttv0: tuner absent
> * *bttv0: registered device video0
> * *bttv0: registered device vbi0
> * *bttv0: PLL: 28636363 => 35468950 .
> * *serial 0000:03:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40
> * *Couldn't register serial port 0000:03:00.1: -28
> * *. ok
> * *bttv0: add subdevice "dvb0"
> *** IR keymap rc-avermedia-dvbt not found
> *** Registered IR keymap rc-empty
> * *input: bttv IR (card=123) as /devices/pci0000:00/0000:00:14.4/0000:01:06.0/rc/rc0/input6
> * *rc0: bttv IR (card=123) as /devices/pci0000:00/0000:00:14.4/0000:01:06.0/rc/rc0
> * *bt878: AUDIO driver version 0.0.0 loaded
> * *bt878: Bt878 AUDIO function found (0).
> * *bt878 0000:01:06.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> * *bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
> * *bt878(0): Bt878 (rev 17) at 01:06.1, irq: 21, latency: 64, memory: 0xd5ffe000

Take a look in the kernel configuration. I think there should be
something like this Drivers -> Media -> IR.

--
Daniel Pielmeier
 
Old 01-20-2011, 04:03 PM
 
Default Keymap used for bttv (dvbt) ???

Daniel Pielmeier <billie@gentoo.org> [11-01-20 17:43]:
> 2011/1/20 <meino.cramer@gmx.de>:
> >
> > * *bttv: driver version 0.9.18 loaded
> > * *bttv: using 8 buffers with 2080k (520 pages) each for capture
> > * *bttv: Bt8xx card found (0).
> > * *bttv 0000:01:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> > * *bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 21, latency: 64, mmio: 0xd5fff000
> > * *bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
> > * *bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
> > * *bttv0: gpio: en=00000000, out=00000000 in=00d7710f [init]
> > * *bttv0: tuner absent
> > * *bttv0: registered device video0
> > * *bttv0: registered device vbi0
> > * *bttv0: PLL: 28636363 => 35468950 .
> > * *serial 0000:03:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40
> > * *Couldn't register serial port 0000:03:00.1: -28
> > * *. ok
> > * *bttv0: add subdevice "dvb0"
> > *** IR keymap rc-avermedia-dvbt not found
> > *** Registered IR keymap rc-empty
> > * *input: bttv IR (card=123) as /devices/pci0000:00/0000:00:14.4/0000:01:06.0/rc/rc0/input6
> > * *rc0: bttv IR (card=123) as /devices/pci0000:00/0000:00:14.4/0000:01:06.0/rc/rc0
> > * *bt878: AUDIO driver version 0.0.0 loaded
> > * *bt878: Bt878 AUDIO function found (0).
> > * *bt878 0000:01:06.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> > * *bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
> > * *bt878(0): Bt878 (rev 17) at 01:06.1, irq: 21, latency: 64, memory: 0xd5ffe000
>
> Take a look in the kernel configuration. I think there should be
> something like this Drivers -> Media -> IR.
>
> --
> Daniel Pielmeier
>

Hi,

I did this before posting and found nothing...

Anything else ?

mcc
 
Old 01-20-2011, 05:32 PM
Daniel Pielmeier
 
Default Keymap used for bttv (dvbt) ???

meino.cramer@gmx.de schrieb am 20.01.2011 18:03:
>
> I did this before posting and found nothing...
>
> Anything else ?

What about:
-> Device Drivers
-> Multimedia support
-> Infrared remote controller adapters
< > Compile Remote Controller keymap modules

You can also try the dst module. It is not directly related as you do
not use a remote control, but maybe it has some influence and you loose
nothing by trying it.

--
Daniel Pielmeier
 
Old 01-20-2011, 06:26 PM
 
Default Keymap used for bttv (dvbt) ???

Daniel Pielmeier <billie@gentoo.org> [11-01-20 19:40]:
> meino.cramer@gmx.de schrieb am 20.01.2011 18:03:
> >
> > I did this before posting and found nothing...
> >
> > Anything else ?
>
> What about:
> -> Device Drivers
> -> Multimedia support
> -> Infrared remote controller adapters
> < > Compile Remote Controller keymap modules
>
> You can also try the dst module. It is not directly related as you do
> not use a remote control, but maybe it has some influence and you loose
> nothing by trying it.
>
> --
> Daniel Pielmeier
>

Hi,

thanks for pointing me to the right direction.
This fixes the alert in the dmesg log but it does not
fix my channel switching problem...unfortunately...

Any other ideas?

Best regards,
mcc
 

Thread Tools




All times are GMT. The time now is 06:09 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org