FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Gentoo > Gentoo User

 
 
LinkBack Thread Tools
 
Old 12-31-2010, 12:22 AM
Bill Longman
 
Default Core i7 M620 power management problem

On 12/30/2010 02:44 PM, Stefan G. Weichinger wrote:
> Am 2010-12-30 18:54, schrieb Bill Longman:
>> On 12/30/2010 12:59 AM, Stefan G. Weichinger wrote:
>>> Bill, just for a check, does it scale correctly if you boot from a live-cd?
>>
>> Well, if I change the BIOS to turn off SpeedStep, it goes to 2.67
>> GHz.....works great!
>
> good to hear. So it is solved?

LOL! Well, if by "solved" you mean that I am able to use the full power
of my CPU, then, yes, it is solved. However, it is now completely
incapable of having its CPU controlled for power, so once I go on
batteries, I have about an hour and a half....so in that sense, no, it's
not solved. No, it's not solved. I am going to burn an ISO and boot one
of those "other" distros that shall remain nameless and see if there is
something strange with my Gentoo kernel madness or whether it's this
machine.
 
Old 12-31-2010, 09:59 AM
Mick
 
Default Core i7 M620 power management problem

On Friday 31 December 2010 01:22:11 Bill Longman wrote:
> On 12/30/2010 02:44 PM, Stefan G. Weichinger wrote:
> > Am 2010-12-30 18:54, schrieb Bill Longman:
> >> On 12/30/2010 12:59 AM, Stefan G. Weichinger wrote:
> >>> Bill, just for a check, does it scale correctly if you boot from a
> >>> live-cd?
> >>
> >> Well, if I change the BIOS to turn off SpeedStep, it goes to 2.67
> >> GHz.....works great!
> >
> > good to hear. So it is solved?
>
> LOL! Well, if by "solved" you mean that I am able to use the full power
> of my CPU, then, yes, it is solved. However, it is now completely
> incapable of having its CPU controlled for power, so once I go on
> batteries, I have about an hour and a half....so in that sense, no, it's
> not solved. No, it's not solved. I am going to burn an ISO and boot one
> of those "other" distros that shall remain nameless and see if there is
> something strange with my Gentoo kernel madness or whether it's this
> machine.

Hmm ... could it be a buggy BIOS? Are you running the latest firmware for it?

Have you diff'ed the LiveCD kernel and yours?
--
Regards,
Mick
 
Old 01-01-2011, 10:16 AM
"Stefan G. Weichinger"
 
Default Core i7 M620 power management problem

Am 2010-12-31 11:59, schrieb Mick:

> Hmm ... could it be a buggy BIOS? Are you running the latest firmware for it?

Yes, that would also have been my next question.
Maybe you even *find* a bug in that BIOS right now that should be corrected.
 
Old 01-01-2011, 07:10 PM
Bill Longman
 
Default Core i7 M620 power management problem

I actually am running the latest firmware. I had thought that maybe that was the problem, but I rev'ed it about a month ago and it did not solve it. Am waiting for the Ubuntu 10.10 to finish downloading and give that a whirl.


On Sat, Jan 1, 2011 at 3:16 AM, Stefan G. Weichinger <lists@xunil.at> wrote:

Am 2010-12-31 11:59, schrieb Mick:



> Hmm ... could it be a buggy BIOS? *Are you running the latest firmware for it?



Yes, that would also have been my next question.

Maybe you even *find* a bug in that BIOS right now that should be corrected.







--
Bill Longman
 
Old 01-01-2011, 10:50 PM
Bill Longman
 
Default Core i7 M620 power management problem

On 01/01/2011 03:16 AM, Stefan G. Weichinger wrote:
> Am 2010-12-31 11:59, schrieb Mick:
>
>> Hmm ... could it be a buggy BIOS? Are you running the latest firmware for it?
>
> Yes, that would also have been my next question.
> Maybe you even *find* a bug in that BIOS right now that should be corrected.

Well the good news is that my BIOS is not foobarred. The bad news is
that I have to figure out what's wrong -- Ubuntu 10.10 came up with
scaling_max_freq = 2667000. ARGH!!!!

Changing some kernel settings....

And attached is the dmesg from that ~other~ OS.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-22-generic (buildd@allspice) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
[ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz nomodeset
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095c00 (usable)
[ 0.000000] BIOS-e820: 0000000000095c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf65f000 (usable)
[ 0.000000] BIOS-e820: 00000000cf65f000 - 00000000cf67f000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf67f000 - 00000000cf76f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf76f000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x12c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 base 12C000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf65f max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000095c00 (usable)
[ 0.000000] modified: 0000000000095c00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cf65f000 (usable)
[ 0.000000] modified: 00000000cf65f000 - 00000000cf67f000 (ACPI data)
[ 0.000000] modified: 00000000cf67f000 - 00000000cf76f000 (ACPI NVS)
[ 0.000000] modified: 00000000cf76f000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 000000012c000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f2230] f2230
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf65f000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf65f000 page 4k
[ 0.000000] kernel direct mapping tables up to cf65f000 @ 16000-1c000
[ 0.000000] init_memory_mapping: 0000000100000000-000000012c000000
[ 0.000000] 0100000000 - 012c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 12c000000 @ 1a000-20000
[ 0.000000] RAMDISK: 7f4c1000 - 80000000
[ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000cf67de18 0006C (v01 DELL E2 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000cf75fc18 000F4 (v04 DELL E2 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100428/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF76BF40/0x00000000CF76ED40, using 32 (20100428/tbfadt-486)
[ 0.000000] ACPI: DSDT 00000000cf73e018 0A6C0 (v01 DELL E2 00001001 INTL 20080729)
[ 0.000000] ACPI: FACS 00000000cf76bf40 00040
[ 0.000000] ACPI: APIC 00000000cf67cf18 0008C (v02 DELL E2 06222004 MSFT 00010013)
[ 0.000000] ACPI: TCPA 00000000cf76dd18 00032 (v02 00000000 00000000)
[ 0.000000] ACPI: MCFG 00000000cf76dc98 0003C (v01 A M I GMCH945. 06222004 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cf76dc18 00038 (v01 DELL E2 00000001 ASL 00000061)
[ 0.000000] ACPI: BOOT 00000000cf76db98 00028 (v01 DELL E2 06222004 AMI 00010013)
[ 0.000000] ACPI: SLIC 00000000cf766818 00176 (v03 DELL E2 06222004 MSFT 00010013)
[ 0.000000] ACPI: SSDT 00000000cf74d018 009F1 (v01 PmRef CpuPm 00003000 INTL 20080729)
[ 0.000000] ACPI: DMAR 00000000cf75ff18 00080 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000012c000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000012c000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880100200000-ffff880103bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0012c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000cf65f
[ 0.000000] 0: 0x00100000 -> 0x0012c000
[ 0.000000] On node 0 totalpages: 1029604
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831127 pages, LIFO batch:31
[ 0.000000] Normal zone: 2464 pages used for memmap
[ 0.000000] Normal zone: 177760 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [1b000 - 1b7ff]
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf65f000 - 00000000cf67f000
[ 0.000000] PM: Registered nosave memory: 00000000cf67f000 - 00000000cf76f000
[ 0.000000] PM: Registered nosave memory: 00000000cf76f000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u262144
[ 0.000000] early_res array is doubled to 128 at [1b800 - 1c7ff]
[ 0.000000] pcpu-alloc: s91520 r8192 d23168 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012804
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (64 early reservations)
[ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS
[ 0.000000] #2 [007f4c1000 - 0080000000] RAMDISK
[ 0.000000] #3 [0001d18000 - 0001d18209] BRK
[ 0.000000] #4 [0000095c00 - 00000f2230] BIOS reserved
[ 0.000000] #5 [00000f2230 - 00000f2240] MP-table mpf
[ 0.000000] #6 [00000f2408 - 0000100000] BIOS reserved
[ 0.000000] #7 [00000f2240 - 00000f2408] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #10 [0000016000 - 000001a000] PGTABLE
[ 0.000000] #11 [000001a000 - 000001b000] PGTABLE
[ 0.000000] #12 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #13 [0001d18240 - 0001d19240] BOOTMEM
[ 0.000000] #14 [0001d17140 - 0001d17440] BOOTMEM
[ 0.000000] #15 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #16 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #17 [0100200000 - 0103c00000] MEMMAP 0
[ 0.000000] #18 [0001d17440 - 0001d175c0] BOOTMEM
[ 0.000000] #19 [0001d19240 - 0001d31240] BOOTMEM
[ 0.000000] #20 [0001d31240 - 0001d37240] BOOTMEM
[ 0.000000] #21 [0001d38000 - 0001d39000] BOOTMEM
[ 0.000000] #22 [0001d175c0 - 0001d17601] BOOTMEM
[ 0.000000] #23 [0001d17640 - 0001d17683] BOOTMEM
[ 0.000000] #24 [0001d176c0 - 0001d17a40] BOOTMEM
[ 0.000000] #25 [0001d17a40 - 0001d17aa8] BOOTMEM
[ 0.000000] #26 [0001d17ac0 - 0001d17b28] BOOTMEM
[ 0.000000] #27 [0001d17b40 - 0001d17ba8] BOOTMEM
[ 0.000000] #28 [0001d17bc0 - 0001d17c28] BOOTMEM
[ 0.000000] #29 [0001d17c40 - 0001d17ca8] BOOTMEM
[ 0.000000] #30 [0001d17cc0 - 0001d17d28] BOOTMEM
[ 0.000000] #31 [0001d17d40 - 0001d17da8] BOOTMEM
[ 0.000000] #32 [0001d17dc0 - 0001d17e28] BOOTMEM
[ 0.000000] #33 [0001d17e40 - 0001d17ea8] BOOTMEM
[ 0.000000] #34 [0001d17ec0 - 0001d17f28] BOOTMEM
[ 0.000000] #35 [0001d17f40 - 0001d17fa8] BOOTMEM
[ 0.000000] #36 [0001d37240 - 0001d372a8] BOOTMEM
[ 0.000000] #37 [0001d372c0 - 0001d37328] BOOTMEM
[ 0.000000] #38 [0001d37340 - 0001d373a8] BOOTMEM
[ 0.000000] #39 [0001d373c0 - 0001d37428] BOOTMEM
[ 0.000000] #40 [0001d17fc0 - 0001d17fe0] BOOTMEM
[ 0.000000] #41 [0001d37440 - 0001d37460] BOOTMEM
[ 0.000000] #42 [0001d37480 - 0001d374d0] BOOTMEM
[ 0.000000] #43 [0001d37500 - 0001d37550] BOOTMEM
[ 0.000000] #44 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #45 [0001e40000 - 0001e5e000] BOOTMEM
[ 0.000000] #46 [0001e80000 - 0001e9e000] BOOTMEM
[ 0.000000] #47 [0001ec0000 - 0001ede000] BOOTMEM
[ 0.000000] #48 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #49 [0001f40000 - 0001f5e000] BOOTMEM
[ 0.000000] #50 [0001f80000 - 0001f9e000] BOOTMEM
[ 0.000000] #51 [0001fc0000 - 0001fde000] BOOTMEM
[ 0.000000] #52 [0001d37580 - 0001d37588] BOOTMEM
[ 0.000000] #53 [0001d375c0 - 0001d375c8] BOOTMEM
[ 0.000000] #54 [0001d37600 - 0001d37620] BOOTMEM
[ 0.000000] #55 [0001d37640 - 0001d37680] BOOTMEM
[ 0.000000] #56 [0001d37680 - 0001d377a0] BOOTMEM
[ 0.000000] #57 [0001d377c0 - 0001d37808] BOOTMEM
[ 0.000000] #58 [0001d37840 - 0001d37888] BOOTMEM
[ 0.000000] #59 [0001d39000 - 0001d41000] BOOTMEM
[ 0.000000] #60 [0001fde000 - 0005fde000] BOOTMEM
[ 0.000000] #61 [0001d41000 - 0001d61000] BOOTMEM
[ 0.000000] #62 [0001d61000 - 0001da1000] BOOTMEM
[ 0.000000] #63 [000001c800 - 0000024800] BOOTMEM
[ 0.000000] Memory: 3966948k/4915200k available (5708k kernel code, 796784k absent, 151468k reserved, 5382k data, 908k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 41943040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2660.209 MHz processor.
[ 0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.41 BogoMIPS (lpj=26602090)
[ 0.000187] pid_max: default: 32768 minimum: 301
[ 0.000298] Security Framework initialized
[ 0.000409] AppArmor: AppArmor initialized
[ 0.000502] Yama: becoming mindful.
[ 0.001002] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002311] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002914] Mount-cache hash table entries: 256
[ 0.003128] Initializing cgroup subsys ns
[ 0.003217] Initializing cgroup subsys cpuacct
[ 0.003302] Initializing cgroup subsys memory
[ 0.003409] Initializing cgroup subsys devices
[ 0.003524] Initializing cgroup subsys freezer
[ 0.003620] Initializing cgroup subsys net_cls
[ 0.003739] CPU: Physical Processor ID: 0
[ 0.003827] CPU: Processor Core ID: 0
[ 0.003916] mce: CPU supports 9 MCE banks
[ 0.004021] CPU0: Thermal monitoring handled by SMI
[ 0.004028] using mwait in idle threads.
[ 0.004119] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.004428] ... version: 3
[ 0.004521] ... bit width: 48
[ 0.004608] ... generic registers: 4
[ 0.004699] ... value mask: 0000ffffffffffff
[ 0.004783] ... max period: 000000007fffffff
[ 0.004876] ... fixed-purpose events: 3
[ 0.004963] ... event mask: 000000070000000f
[ 0.007252] ACPI: Core revision 20100428
[ 0.025028] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.025128] ftrace: allocating 22680 entries in 89 pages
[ 0.033121] DMAR: Host address width 36
[ 0.033218] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.033316] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.033443] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.033542] IOMMU 1: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[ 0.033648] DMAR: RMRR base: 0x000000cf7d7000 end: 0x000000cf7e6fff
[ 0.033920] Setting APIC routing to flat
[ 0.034385] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.134560] CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz stepping 02
[ 0.252959] Booting Node 0, Processors #1
[ 0.412452] CPU1: Thermal monitoring handled by SMI
[ 0.432628] #2
[ 0.592001] CPU2: Thermal monitoring handled by SMI
[ 0.612105] #3
[ 0.771551] CPU3: Thermal monitoring handled by SMI
[ 0.791567] Brought up 4 CPUs
[ 0.791752] Total of 4 processors activated (21284.85 BogoMIPS).
[ 0.793842] devtmpfs: initialized
[ 0.794954] regulator: core version 0.5
[ 0.795082] Time: 14:59:46 Date: 01/01/11
[ 0.795199] NET: Registered protocol family 16
[ 0.795395] Trying to unpack rootfs image as initramfs...
[ 0.795409] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.795411] ACPI: bus type pci registered
[ 0.795485] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.795488] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.803628] PCI: Using configuration type 1 for base access
[ 0.804417] bio: create slab <bio-0> at 0
[ 0.806457] ACPI: EC: Look up EC in DSDT
[ 0.815993] ACPI: BIOS _OSI(Linux) query ignored
[ 0.818077] ACPI: BIOS _OSI(Linux) query ignored
[ 0.836165] ACPI: SSDT 00000000cf7eaa18 00474 (v01 PmRef Cpu0Ist 00003000 INTL 20080729)
[ 0.836931] ACPI: Dynamic OEM Table Load:
[ 0.837172] ACPI: SSDT (null) 00474 (v01 PmRef Cpu0Ist 00003000 INTL 20080729)
[ 0.837909] ACPI: SSDT 00000000cf7e8018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729)
[ 0.838648] ACPI: Dynamic OEM Table Load:
[ 0.838886] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729)
[ 0.839782] ACPI: SSDT 00000000cf7e9a98 00303 (v01 PmRef ApIst 00003000 INTL 20080729)
[ 0.840583] ACPI: Dynamic OEM Table Load:
[ 0.840822] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20080729)
[ 0.841291] ACPI: SSDT 00000000cf7e7d98 00119 (v01 PmRef ApCst 00003000 INTL 20080729)
[ 0.842062] ACPI: Dynamic OEM Table Load:
[ 0.842295] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20080729)
[ 0.846079] ACPI: Interpreter enabled
[ 0.846178] ACPI: (supports S0 S3 S4 S5)
[ 0.846592] ACPI: Using IOAPIC for interrupt routing
[ 0.869381] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
[ 0.870661] ACPI: No dock devices found.
[ 0.870758] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.871928] \_SB_.PCI0:_OSC invalid UUID
[ 0.871929] _OSC request data:1 8 1f
[ 0.871932] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.873653] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.873752] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.873848] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.873960] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
[ 0.874145] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.874147] pci 0000:00:01.0: PME# disabled
[ 0.874240] pci 0000:00:19.0: reg 10: [mem 0xe9600000-0xe961ffff]
[ 0.874247] pci 0000:00:19.0: reg 14: [mem 0xe9680000-0xe9680fff]
[ 0.874254] pci 0000:00:19.0: reg 18: [io 0x8040-0x805f]
[ 0.874321] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.874334] pci 0000:00:19.0: PME# disabled
[ 0.874396] pci 0000:00:1a.0: reg 10: [mem 0xe9670000-0xe96703ff]
[ 0.874473] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.874478] pci 0000:00:1a.0: PME# disabled
[ 0.874539] pci 0000:00:1b.0: reg 10: [mem 0xe9660000-0xe9663fff 64bit]
[ 0.874612] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.874623] pci 0000:00:1b.0: PME# disabled
[ 0.874734] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.874738] pci 0000:00:1c.0: PME# disabled
[ 0.874859] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.874863] pci 0000:00:1c.1: PME# disabled
[ 0.874983] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.874987] pci 0000:00:1c.2: PME# disabled
[ 0.875107] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.875112] pci 0000:00:1c.3: PME# disabled
[ 0.875184] pci 0000:00:1d.0: reg 10: [mem 0xe9650000-0xe96503ff]
[ 0.875270] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.875275] pci 0000:00:1d.0: PME# disabled
[ 0.875528] pci 0000:00:1f.2: reg 10: [io 0x8090-0x8097]
[ 0.875535] pci 0000:00:1f.2: reg 14: [io 0x8080-0x8083]
[ 0.875542] pci 0000:00:1f.2: reg 18: [io 0x8070-0x8077]
[ 0.875548] pci 0000:00:1f.2: reg 1c: [io 0x8060-0x8063]
[ 0.875563] pci 0000:00:1f.2: reg 20: [io 0x8020-0x803f]
[ 0.875570] pci 0000:00:1f.2: reg 24: [mem 0xe9640000-0xe96407ff]
[ 0.875628] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.875632] pci 0000:00:1f.2: PME# disabled
[ 0.875675] pci 0000:00:1f.3: reg 10: [mem 0xe9630000-0xe96300ff 64bit]
[ 0.875700] pci 0000:00:1f.3: reg 20: [io 0x8000-0x801f]
[ 0.875772] pci 0000:00:1f.6: reg 10: [mem 0xe9620000-0xe9620fff 64bit]
[ 0.875899] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
[ 0.875917] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.875924] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.875928] pci 0000:01:00.0: reg 24: [io 0x7000-0x707f]
[ 0.875932] pci 0000:01:00.0: reg 30: [mem 0xe3000000-0xe307ffff pref]
[ 0.875993] pci 0000:01:00.1: reg 10: [mem 0xe3080000-0xe3083fff]
[ 0.876057] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.876156] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.876158] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe30fffff]
[ 0.876161] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.876239] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.876337] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.876341] pci 0000:00:1c.0: bridge window [mem 0xe8200000-0xe95fffff]
[ 0.876348] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.876497] pci 0000:03:00.0: reg 10: [mem 0xe6e00000-0xe6e01fff 64bit]
[ 0.876634] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.876641] pci 0000:03:00.0: PME# disabled
[ 0.876691] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.876789] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.876793] pci 0000:00:1c.1: bridge window [mem 0xe6e00000-0xe81fffff]
[ 0.876800] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.876960] pci 0000:04:00.0: reg 10: [mem 0xe5940000-0xe5940fff]
[ 0.877087] pci 0000:04:00.0: supports D1 D2
[ 0.877088] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.877094] pci 0000:04:00.0: PME# disabled
[ 0.877233] pci 0000:04:00.1: reg 10: [mem 0xe5930000-0xe59300ff]
[ 0.877423] pci 0000:04:00.1: supports D1 D2
[ 0.877424] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.877430] pci 0000:04:00.1: PME# disabled
[ 0.877579] pci 0000:04:00.4: reg 10: [mem 0xe5900000-0xe59007ff]
[ 0.877791] pci 0000:04:00.4: supports D1 D2
[ 0.877792] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.877837] pci 0000:04:00.4: PME# disabled
[ 0.877876] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.877974] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 0.877978] pci 0000:00:1c.2: bridge window [mem 0xe3100000-0xe59fffff]
[ 0.877985] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.878238] pci_bus 0000:05: [bus 05-08] partially hidden behind bridge 0000:04 [bus 04-05]
[ 0.878464] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
[ 0.878561] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.878565] pci 0000:00:1c.3: bridge window [mem 0xe5a00000-0xe6dfffff]
[ 0.878572] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.878666] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[ 0.878769] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.878773] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.878788] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.878790] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.878792] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.878793] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.878795] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
[ 0.878837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.879089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.879245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.879441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.879595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.879741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.879895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.880214] \_SB_.PCI0:_OSC invalid UUID
[ 0.880215] _OSC request data:1 19 1f
[ 0.886114] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[ 0.886732] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.887911] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.888993] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.890092] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.891281] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.892355] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.893604] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.894708] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.895867] HEST: Table is not found!
[ 0.896058] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.896174] vgaarb: loaded
[ 0.896394] SCSI subsystem initialized
[ 0.896609] libata version 3.00 loaded.
[ 0.896652] usbcore: registered new interface driver usbfs
[ 0.896767] usbcore: registered new interface driver hub
[ 0.896884] usbcore: registered new device driver usb
[ 0.897178] ACPI: WMI: Mapper loaded
[ 0.897274] PCI: Using ACPI for IRQ routing
[ 0.897370] PCI: pci_cache_line_size set to 64 bytes
[ 0.897581] reserve RAM buffer: 0000000000095c00 - 000000000009ffff
[ 0.897583] reserve RAM buffer: 00000000cf65f000 - 00000000cfffffff
[ 0.897671] NetLabel: Initializing
[ 0.897756] NetLabel: domain hash size = 128
[ 0.897851] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.897961] NetLabel: unlabeled traffic allowed by default
[ 0.898101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.898847] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.900966] Switching to clocksource tsc
[ 3.383172] AppArmor: AppArmor Filesystem Enabled
[ 3.383300] pnp: PnP ACPI init
[ 3.383404] ACPI: bus type pnp registered
[ 3.387918] alloc irq_desc for 23 on node 0
[ 3.387920] alloc kstat_irqs on node 0
[ 3.392755] pnp: PnP ACPI: found 13 devices
[ 3.392865] ACPI: ACPI bus type pnp unregistered
[ 3.392982] system 00:05: [io 0x0680-0x069f] has been reserved
[ 3.393091] system 00:05: [io 0x1000-0x1003] has been reserved
[ 3.393195] system 00:05: [io 0x1004-0x1013] has been reserved
[ 3.393294] system 00:05: [io 0xffff] has been reserved
[ 3.393394] system 00:05: [io 0x0400-0x047f] has been reserved
[ 3.393497] system 00:05: [io 0x0500-0x057f] has been reserved
[ 3.393597] system 00:05: [io 0x164e-0x164f] has been reserved
[ 3.393714] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 3.393820] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 3.393920] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 3.394036] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 3.394141] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 3.394252] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 3.394360] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 3.394464] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 3.394566] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 3.394682] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 3.396374] system 00:0a: [mem 0xe96c0000-0xe96c0fff] has been reserved
[ 3.402938] pci 0000:00:1c.2: BAR 15: assigned [mem 0xec000000-0xefffffff pref]
[ 3.403073] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe9700000-0xe98fffff 64bit pref]
[ 3.403203] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe9900000-0xe9afffff 64bit pref]
[ 3.403326] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe9b00000-0xe9cfffff 64bit pref]
[ 3.403442] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 3.403549] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 3.403648] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe30fffff]
[ 3.403755] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 3.403858] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 3.403968] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 3.404077] pci 0000:00:1c.0: bridge window [mem 0xe8200000-0xe95fffff]
[ 3.404194] pci 0000:00:1c.0: bridge window [mem 0xe9700000-0xe98fffff 64bit pref]
[ 3.404324] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 3.404424] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 3.404530] pci 0000:00:1c.1: bridge window [mem 0xe6e00000-0xe81fffff]
[ 3.404647] pci 0000:00:1c.1: bridge window [mem 0xe9900000-0xe9afffff 64bit pref]
[ 3.404775] pci 0000:04:00.0: BAR 15: assigned [mem 0xec000000-0xefffffff pref]
[ 3.404891] pci 0000:04:00.0: BAR 16: can't assign mem (size 0x4000000)
[ 3.405003] pci 0000:04:00.0: BAR 13: assigned [io 0x2000-0x20ff]
[ 3.405101] pci 0000:04:00.0: BAR 14: assigned [io 0x2400-0x24ff]
[ 3.405202] pci 0000:04:00.0: CardBus bridge to [bus 05-08]
[ 3.405302] pci 0000:04:00.0: bridge window [io 0x2000-0x20ff]
[ 3.405453] pci 0000:04:00.0: bridge window [io 0x2400-0x24ff]
[ 3.405608] pci 0000:04:00.0: bridge window [mem 0xec000000-0xefffffff pref]
[ 3.405793] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 3.405895] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 3.406004] pci 0000:00:1c.2: bridge window [mem 0xe3100000-0xe59fffff]
[ 3.406116] pci 0000:00:1c.2: bridge window [mem 0xec000000-0xefffffff pref]
[ 3.406246] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
[ 3.406348] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 3.406456] pci 0000:00:1c.3: bridge window [mem 0xe5a00000-0xe6dfffff]
[ 3.406567] pci 0000:00:1c.3: bridge window [mem 0xe9b00000-0xe9cfffff 64bit pref]
[ 3.406696] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[ 3.406797] pci 0000:00:1e.0: bridge window [io disabled]
[ 3.406900] pci 0000:00:1e.0: bridge window [mem disabled]
[ 3.407006] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 3.407130] alloc irq_desc for 16 on node -1
[ 3.407132] alloc kstat_irqs on node -1
[ 3.407150] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.407256] pci 0000:00:01.0: setting latency timer to 64
[ 3.407277] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.407384] pci 0000:00:1c.0: setting latency timer to 64
[ 3.407404] alloc irq_desc for 17 on node -1
[ 3.407406] alloc kstat_irqs on node -1
[ 3.407411] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.407520] pci 0000:00:1c.1: setting latency timer to 64
[ 3.407541] alloc irq_desc for 18 on node -1
[ 3.407543] alloc kstat_irqs on node -1
[ 3.407547] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.407665] pci 0000:00:1c.2: setting latency timer to 64
[ 3.407729] pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.407885] pci 0000:04:00.0: setting latency timer to 64
[ 3.407897] alloc irq_desc for 19 on node -1
[ 3.407899] alloc kstat_irqs on node -1
[ 3.407903] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.408017] pci 0000:00:1c.3: setting latency timer to 64
[ 3.408027] pci 0000:00:1e.0: setting latency timer to 64
[ 3.408034] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 3.408044] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 3.408046] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 3.408049] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff]
[ 3.408051] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
[ 3.408053] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xe30fffff]
[ 3.408055] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 3.408057] pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe95fffff]
[ 3.408059] pci_bus 0000:02: resource 2 [mem 0xe9700000-0xe98fffff 64bit pref]
[ 3.408061] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 3.408063] pci_bus 0000:03: resource 1 [mem 0xe6e00000-0xe81fffff]
[ 3.408065] pci_bus 0000:03: resource 2 [mem 0xe9900000-0xe9afffff 64bit pref]
[ 3.408075] pci_bus 0000:04: resource 0 [io 0x2000-0x3fff]
[ 3.408077] pci_bus 0000:04: resource 1 [mem 0xe3100000-0xe59fffff]
[ 3.408079] pci_bus 0000:04: resource 2 [mem 0xec000000-0xefffffff pref]
[ 3.408081] pci_bus 0000:05: resource 0 [io 0x2000-0x20ff]
[ 3.408083] pci_bus 0000:05: resource 1 [io 0x2400-0x24ff]
[ 3.408085] pci_bus 0000:05: resource 2 [mem 0xec000000-0xefffffff pref]
[ 3.408088] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 3.408090] pci_bus 0000:06: resource 1 [mem 0xe5a00000-0xe6dfffff]
[ 3.408092] pci_bus 0000:06: resource 2 [mem 0xe9b00000-0xe9cfffff 64bit pref]
[ 3.408094] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
[ 3.408096] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
[ 3.408098] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[ 3.408108] pci_bus 0000:0c: resource 7 [mem 0xd0000000-0xfeafffff]
[ 3.408159] NET: Registered protocol family 2
[ 3.408476] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 3.409971] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 3.413436] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.413959] TCP: Hash tables configured (established 524288 bind 65536)
[ 3.414065] TCP reno registered
[ 3.414168] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 3.414315] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 3.414574] NET: Registered protocol family 1
[ 3.414833] pci 0000:01:00.0: Boot video device
[ 3.414928] PCI: CLS 64 bytes, default 64
[ 3.414930] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.415045] Placing 64MB software IO TLB between ffff880001fde000 - ffff880005fde000
[ 3.415171] software IO TLB at phys 0x1fde000 - 0x5fde000
[ 3.415318] Simple Boot Flag at 0xf1 set to 0x1
[ 3.415676] Scanning for low memory corruption every 60 seconds
[ 3.415908] audit: initializing netlink socket (disabled)
[ 3.416025] type=2000 audit(1293893988.290:1): initialized
[ 3.430239] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.431652] VFS: Disk quotas dquot_6.5.2
[ 3.431790] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.432412] fuse init (API version 7.14)
[ 3.432588] msgmni has been set to 7747
[ 3.433115] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.433239] io scheduler noop registered
[ 3.433320] io scheduler deadline registered
[ 3.433447] io scheduler cfq registered (default)
[ 3.433640] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.433665] alloc irq_desc for 40 on node -1
[ 3.433667] alloc kstat_irqs on node -1
[ 3.433675] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.433734] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.433790] alloc irq_desc for 41 on node -1
[ 3.433792] alloc kstat_irqs on node -1
[ 3.433799] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 3.433897] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.433953] alloc irq_desc for 42 on node -1
[ 3.433954] alloc kstat_irqs on node -1
[ 3.433961] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 3.434062] pcieport 0000:00:1c.2: setting latency timer to 64
[ 3.434118] alloc irq_desc for 43 on node -1
[ 3.434119] alloc kstat_irqs on node -1
[ 3.434127] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 3.434233] pcieport 0000:00:1c.3: setting latency timer to 64
[ 3.434281] alloc irq_desc for 44 on node -1
[ 3.434282] alloc kstat_irqs on node -1
[ 3.434297] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 3.434401] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.434672] \_SB_.PCI0:_OSC invalid UUID
[ 3.434673] _OSC request data:1 0 1f
[ 3.434794] \_SB_.PCI0:_OSC invalid UUID
[ 3.434795] _OSC request data:1 0 1f
[ 3.434912] \_SB_.PCI0:_OSC invalid UUID
[ 3.434913] _OSC request data:1 0 1f
[ 3.435044] \_SB_.PCI0:_OSC invalid UUID
[ 3.435045] _OSC request data:1 0 1f
[ 3.435176] \_SB_.PCI0:_OSC invalid UUID
[ 3.435177] _OSC request data:1 0 1f
[ 3.435286] \_SB_.PCI0:_OSC invalid UUID
[ 3.435287] _OSC request data:1 0 1f
[ 3.435404] \_SB_.PCI0:_OSC invalid UUID
[ 3.435405] _OSC request data:1 0 1f
[ 3.435514] \_SB_.PCI0:_OSC invalid UUID
[ 3.435515] _OSC request data:1 0 1f
[ 3.435538] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.435707] intel_idle: MWAIT substates: 0x1120
[ 3.435708] intel_idle: v0.4 model 0x25
[ 3.435709] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.436456] ACPI: AC Adapter [AC] (on-line)
[ 3.436673] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 3.437429] ACPI: Lid Switch [LID]
[ 3.437582] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 3.437710] ACPI: Power Button [PBTN]
[ 3.437847] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 3.437977] ACPI: Sleep Button [SBTN]
[ 3.438125] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.438253] ACPI: Power Button [PWRF]
[ 3.439005] ACPI: acpi_idle yielding to intel_idle
[ 4.151495] ERST: Table is not found!
[ 4.152424] Linux agpgart interface v0.103
[ 4.152549] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.154316] brd: module loaded
[ 4.155228] loop: module loaded
[ 4.155764] Freeing initrd memory: 11516k freed
[ 4.155879] Fixed MDIO Bus: probed
[ 4.155924] PPP generic driver version 2.4.2
[ 4.155962] tun: Universal TUN/TAP device driver, 1.6
[ 4.155963] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.156058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.156095] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.156117] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.156121] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 4.156159] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.156212] ehci_hcd 0000:00:1a.0: debug port 2
[ 4.160113] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 4.160146] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe9670000
[ 4.165846] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.180436] ACPI: Battery Slot [BAT0] (battery present)
[ 4.193120] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.193383] hub 1-0:1.0: USB hub found
[ 4.193480] hub 1-0:1.0: 2 ports detected
[ 4.193665] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.193816] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.193819] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 4.193951] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.194093] ehci_hcd 0000:00:1d.0: debug port 2
[ 4.198066] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 4.198093] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe9650000
[ 4.223045] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.223259] hub 2-0:1.0: USB hub found
[ 4.223354] hub 2-0:1.0: 2 ports detected
[ 4.223500] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.223621] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.223842] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.224168] i8042.c: Warning: Keylock active.
[ 4.225620] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.225715] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.225881] mice: PS/2 mouse device common for all mice
[ 4.226108] rtc_cmos 00:06: RTC can wake from S4
[ 4.226260] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 4.226401] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 4.226589] device-mapper: uevent: version 1.0.3
[ 4.226794] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 4.226983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.227043] device-mapper: multipath: version 1.1.1 loaded
[ 4.227046] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.227380] cpuidle: using governor ladder
[ 4.227605] cpuidle: using governor menu
[ 4.227954] TCP cubic registered
[ 4.228153] NET: Registered protocol family 10
[ 4.228571] lo: Disabled Privacy Extensions
[ 4.228846] NET: Registered protocol family 17
[ 4.230690] PM: Resume from disk failed.
[ 4.230699] registered taskstats version 1
[ 4.231392] Magic number: 11:967:989
[ 4.233455] rtc_cmos 00:06: setting system clock to 2011-01-01 14:59:49 UTC (1293893989)
[ 4.233581] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.233677] EDD information not available.
[ 4.233842] Freeing unused kernel memory: 908k freed
[ 4.234159] Write protecting the kernel read-only data: 10240k
[ 4.234500] Freeing unused kernel memory: 416k freed
[ 4.234829] Freeing unused kernel memory: 1644k freed
[ 4.255772] udev[106]: starting version 163
[ 4.334516] acpi device:02: registered as cooling_device4
[ 4.344072] [drm] Initialized drm 1.1.0 20060810
[ 4.345869] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
[ 4.346062] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.348141] sdhci: Secure Digital Host Controller Interface driver
[ 4.348262] sdhci: Copyright(c) Pierre Ossman
[ 4.352034] sdhci-pci 0000:04:00.1: SDHCI controller found [1180:e822] (rev 3)
[ 4.352223] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.352435] mmc0: Unknown controller version (2). You may experience problems.
[ 4.352617] sdhci-pci 0000:04:00.1: setting latency timer to 64
[ 4.352735] Registered led device: mmc0::
[ 4.352825] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA
[ 4.355137] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
[ 4.355244] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 4.356925] alloc irq_desc for 20 on node -1
[ 4.356928] alloc kstat_irqs on node -1
[ 4.356936] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.357058] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.357145] firewire_ohci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 4.357335] firewire_ohci 0000:04:00.4: setting latency timer to 64
[ 4.357455] alloc irq_desc for 45 on node -1
[ 4.357459] alloc kstat_irqs on node -1
[ 4.357471] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4.389403] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.389523] pci 0000:01:00.0: setting latency timer to 64
[ 4.392789] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5e00a2)
[ 4.398412] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 4.503680] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 4.572961] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:b9:d4:18:f2
[ 4.573085] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 4.573263] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 5051ff-0ff
[ 4.573420] ahci 0000:00:1f.2: version 3.0
[ 4.573455] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.573639] alloc irq_desc for 46 on node -1
[ 4.573641] alloc kstat_irqs on node -1
[ 4.573654] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 4.573780] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl RAID mode
[ 4.573913] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[ 4.574035] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.632263] scsi0 : ahci
[ 4.632570] scsi1 : ahci
[ 4.632711] firewire_ohci: Added fw-ohci device 0000:04:00.4, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x0
[ 4.632783] scsi2 : ahci
[ 4.632861] scsi3 : ahci
[ 4.632948] scsi4 : ahci
[ 4.633022] scsi5 : ahci
[ 4.634160] ata1: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640100 irq 46
[ 4.634269] ata2: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640180 irq 46
[ 4.634381] ata3: DUMMY
[ 4.634462] ata4: DUMMY
[ 4.634545] ata5: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640300 irq 46
[ 4.634656] ata6: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640380 irq 46
[ 4.673473] hub 1-1:1.0: USB hub found
[ 4.673655] hub 1-1:1.0: 6 ports detected
[ 4.802951] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 4.952718] hub 2-1:1.0: USB hub found
[ 4.952945] hub 2-1:1.0: 8 ports detected
[ 4.981330] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.981355] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.981398] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.981472] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.982658] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.985433] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU10N, A102, max UDMA/133
[ 4.990622] ata2.00: configured for UDMA/133
[ 5.111656] firewire_core: created device fw0: GUID 05638a61484fc000, S400
[ 5.228292] ata1.00: ATA-8: ST9250410AS, 0002SDM1, max UDMA/133
[ 5.228414] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.230799] usb 2-1.8: new full speed USB device using ehci_hcd and address 3
[ 5.248405] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.249040] ata1.00: configured for UDMA/133
[ 5.262082] scsi 0:0:0:0: Direct-Access ATA ST9250410AS 0002 PQ: 0 ANSI: 5
[ 5.262357] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.262403] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 5.262473] sd 0:0:0:0: [sda] Write Protect is off
[ 5.262483] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.262498] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.262622] sda:
[ 5.266290] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU10N A102 PQ: 0 ANSI: 5
[ 5.270415] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.270546] Uniform CD-ROM driver Revision: 3.20
[ 5.270728] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.270771] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.291543] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 5.362895] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.365285] usb 2-1.8: config 0 descriptor??
[ 6.965753] Btrfs loaded
[ 6.969537] xor: automatically using best checksumming function: generic_sse
[ 7.016881] generic_sse: 9382.800 MB/sec
[ 7.016907] xor: using function: generic_sse (9382.800 MB/sec)
[ 7.019139] device-mapper: dm-raid45: initialized v0.2594b
[ 7.259892] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.028595] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 10.124845] ISO 9660 Extensions: RRIP_1991A
[ 10.333799] aufs 2-standalone.tree-35-rcN-20100705
[ 10.437607] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 74.235308] Adding 6433996k swap on /dev/sda6. Priority:-1 extents:1 across:6433996k
[ 75.896701] udev[1491]: starting version 163
[ 80.387608] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 80.824888] intel ips 0000:00:1f.6: Warning: CPU TDP doesn't match expected value (found 25, expected 35)
[ 80.824918] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 80.825078] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 80.825284] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 65535
[ 81.344597] cfg80211: Calling CRDA to update world regulatory domain
[ 81.804315] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 83.652240] yenta_cardbus 0000:04:00.0: CardBus bridge found [1028:040c]
[ 83.652315] yenta_cardbus 0000:04:00.0: CardBus bridge to [bus 05-08]
[ 83.652327] yenta_cardbus 0000:04:00.0: bridge window [io 0x2000-0x20ff]
[ 83.652381] yenta_cardbus 0000:04:00.0: bridge window [io 0x2400-0x24ff]
[ 83.652389] yenta_cardbus 0000:04:00.0: bridge window [mem 0xec000000-0xefffffff pref]
[ 83.652396] yenta_cardbus 0000:04:00.0: bridge window [mem 0xe3400000-0xe37fffff]
[ 83.654274] parport_pc 00:08: activated
[ 83.654286] parport_pc 00:08: reported by Plug and Play ACPI
[ 83.654561] parport_pc 00:08: disabled
[ 83.802363] yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0000, PCI irq 18
[ 83.802414] yenta_cardbus 0000:04:00.0: Socket status: 30000810
[ 83.802417] pci_bus 0000:05: Upper limit for fixing this bridge's parent bridge: #05
[ 83.802424] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [io 0x2000-0x3fff]
[ 83.802426] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0xe3100000-0xe59fffff]
[ 83.802429] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe3100000-0xe59fffff: excluding 0xe3390000-0xe38affff 0xe5770000-0xe59fffff
[ 83.802446] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0xec000000-0xefffffff pref]
[ 83.802448] pcmcia_socket pcmcia_socket0: cs: memory probe 0xec000000-0xefffffff: excluding 0xec000000-0xefffffff
[ 84.728954] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 85.041867] ppdev: user-space parallel port driver
[ 85.717934] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe3100000-0xe338ffff: clean.
[ 85.742913] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe38b0000-0xe576ffff: excluding 0xe3e74000-0xe405ffff 0xe4fc0000-0xe51abfff
[ 85.765765] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 18)
[ 85.989725] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 85.989729] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 85.989821] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 85.989838] iwlagn 0000:03:00.0: setting latency timer to 64
[ 86.384521] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 86.404138] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 86.404408] alloc irq_desc for 47 on node -1
[ 86.404409] alloc kstat_irqs on node -1
[ 86.404456] iwlagn 0000:03:00.0: irq 47 for MSI/MSI-X
[ 86.463153] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7
[ 86.880883] cfg80211: World regulatory domain updated:
[ 86.880886] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 86.880888] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 86.880890] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 86.880892] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 86.880893] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 86.880895] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 87.074325] scsi6 : pata_pcmcia
[ 87.074448] ata7: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 18
[ 87.254818] ata7.00: CFA: VIKING ATA FLASH, V1.01, max PIO4
[ 87.254821] ata7.00: 62336 sectors, multi 0: LBA
[ 87.255873] ata7.00: configured for PIO0
[ 87.257973] ata7.00: configured for PIO0
[ 87.257975] ata7: EH complete
[ 87.258087] scsi 6:0:0:0: Direct-Access ATA VIKING ATA FLASH V1.0 PQ: 0 ANSI: 5
[ 87.258273] sd 6:0:0:0: [sdb] 62336 512-byte logical blocks: (31.9 MB/30.4 MiB)
[ 87.258304] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 87.258320] sd 6:0:0:0: [sdb] Write Protect is off
[ 87.258321] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 87.258333] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 87.258495] sdb: sdb1
[ 87.267473] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 87.571003] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 87.571069] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 87.571132] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 88.012523] iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
[ 88.360002] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 88.420004] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 88.420486] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 88.420517] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 90.005249] alloc irq_desc for 22 on node -1
[ 90.005252] alloc kstat_irqs on node -1
[ 90.005268] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 90.005374] alloc irq_desc for 48 on node -1
[ 90.005377] alloc kstat_irqs on node -1
[ 90.005397] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 90.005440] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 90.324691] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 90.324847] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 90.324951] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 90.325048] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 90.325390] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 90.325393] hda_intel: Disable MSI for Nvidia chipset
[ 90.325460] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 91.529546] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 91.533065] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 93.319964] lp: driver loaded but no devices found
[ 102.126068] eth0: no IPv6 routers present
[ 107.599493] [drm] nouveau 0000:01:00.0: called without init
[ 145.640644] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
 
Old 01-01-2011, 11:34 PM
Mick
 
Default Core i7 M620 power management problem

On Saturday 01 January 2011 23:50:21 Bill Longman wrote:
> On 01/01/2011 03:16 AM, Stefan G. Weichinger wrote:
> > Am 2010-12-31 11:59, schrieb Mick:
> >> Hmm ... could it be a buggy BIOS? Are you running the latest firmware
> >> for it?
> >
> > Yes, that would also have been my next question.
> > Maybe you even *find* a bug in that BIOS right now that should be
> > corrected.
>
> Well the good news is that my BIOS is not foobarred. The bad news is
> that I have to figure out what's wrong -- Ubuntu 10.10 came up with
> scaling_max_freq = 2667000. ARGH!!!!
>
> Changing some kernel settings....


Did you diff the kernel configs to see what's different between the two OS'?
--
Regards,
Mick
 
Old 01-02-2011, 03:39 AM
Bill Longman
 
Default Core i7 M620 power management problem

On Sat, Jan 1, 2011 at 4:34 PM, Mick <michaelkintzios@gmail.com> wrote:




Did you diff the kernel configs to see what's different between the two OS'?

There was no /proc/config.gz. How do you find it without that? I looked through the proc tree but didn't find anything.


I added some printk's to the kernel and I see some segfaults. I'll try another kernel tomorrow and see if tuxonice gives me anything different.
--
Bill Longman
 
Old 01-02-2011, 10:59 AM
Mick
 
Default Core i7 M620 power management problem

On Sunday 02 January 2011 04:39:10 Bill Longman wrote:
> On Sat, Jan 1, 2011 at 4:34 PM, Mick <michaelkintzios@gmail.com> wrote:
> > Did you diff the kernel configs to see what's different between the two
> > OS'?
>
> There was no /proc/config.gz. How do you find it without that? I looked
> through the proc tree but didn't find anything.

I'm sure that Ubuntu includes the current kernel(s) config in /boot/. Look
for something like /boot/config-2.6.XX-generic or -server or -386 depending on
your arch and kernel you have chosen. I believe a typical desktop
installation runs *-generic.

--
Regards,
Mick
 

Thread Tools




All times are GMT. The time now is 05:52 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org