FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Gentoo > Gentoo User

 
 
LinkBack Thread Tools
 
Old 10-08-2010, 04:49 PM
 
Default ASUS Crosshair IV Formula + AMD Phenom II X6 1090T: Fan speead readout ???

Hi,

with the setup mentioned in the subject to this posting
I have mananged to get this readout with the command 'sensors':

k10temp-pci-00c3
Adapter: PCI adapter
temp1: +18.5 C (high = +70.0 C, crit = +90.0 C)

atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.28 V (min = +0.80 V, max = +1.60 V)
CPU/NB Voltage: +1.16 V (min = +0.80 V, max = +1.60 V)
CPU VDDA Voltage: +2.50 V (min = +2.00 V, max = +3.00 V)
DRAM Voltage: +1.50 V (min = +1.40 V, max = +1.90 V)
HT Voltage: +1.20 V (min = +0.80 V, max = +1.50 V)
NB Voltage: +1.10 V (min = +0.90 V, max = +1.35 V)
SB Voltage: +1.11 V (min = +0.80 V, max = +1.50 V)
+3.3V Voltage: +3.34 V (min = +2.97 V, max = +3.63 V)
+5V Voltage: +4.93 V (min = +4.50 V, max = +5.50 V)
+12V Voltage: +12.26 V (min = +10.20 V, max = +13.80 V)
CPU Temperature: +34.0 C (high = +40.0 C, crit = +90.0 C)
MB Temperature: +30.0 C (high = +35.0 C, crit = +95.0 C)
NB Temperature: +46.0 C (high = +65.0 C, crit = +95.0 C)
SB Temperature: +40.0 C (high = +35.0 C, crit = +75.0 C)
OPT_TEMP1 Temperature: +0.0 C (high = +0.0 C, crit = +90.0 C)
OPT_TEMP2 Temperature: +0.0 C (high = +0.0 C, crit = +90.0 C)
OPT_TEMP3 Temperature: +0.0 C (high = +0.0 C, crit = +90.0 C)

The help tp atk0110-acpi-0 says:
CONFIG_SENSORS_ATK0110
If you say yes here you get support for the ACPI hardware
monitoring interface found in many ASUS motherboards. This
driver will provide readings of fans, voltages and temperatures
through the system firmware.

The BIOS of this motherboard has displays for fan speeds and even
limits to give alarms on certain conditions.

Neither running sensors-detect nor examination of the output of

sudo lspci -k

has given me a hint.

How can I get these additonal informations?

Best regards,
mcc
 

Thread Tools




All times are GMT. The time now is 11:01 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org