FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Gentoo > Gentoo User

 
 
LinkBack Thread Tools
 
Old 06-18-2010, 06:29 PM
"Christopher Kurtis Koeber"
 
Default Issue with Multiple Networks in Gentoo...

I posted this on the Gentoo Forums but I thought it may be a good idea to email the list as well:
*
I am sure this is simple but I can't figure this out. I added a network card to an existing Gentoo installation to have two in total. ETH1 is my new network card which is a Gigabit connection and ETH0 is my old network card with just an 100 Mbit connection.

I would like for the new network card (ETH1) to connect to a 10.10.50.X (class C) network which accesses out local LAN and the old network card (ETH0) to connect to a 10.10.60.x (class C) network which is a wireless network that does not communicate with the 10.10.50.X network. This network also has internet access, if that is important.

I am not sure what to do. Right now both interfaces get DHCP but I cannot ping either card or get network access.

Here is my current /etc/conf.d/net file:
*
Code:
-------------------------------------------------------------------------------------
*
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d.* To create a more complete configuration,
# please review /etc/conf.d/net.example and save your configuration
# in /etc/conf.d/net (this file :]!).
config_eth1=( "dhcp" )
dhcpcd_eth1="-N"
routes_eth1=( "10.10.50.0/24 via 10.10.50.1"
*********"10.10.1.0/24 via 10.10.50.1"
*********"10.10.10.0/24 via 10.10.50.1"
*********"10.10.20.0/24 via 10.10.50.1"
*********"10.10.30.0/24 via 10.10.50.1"
)
config_eth0=( "10.10.60.3 netmask 255.255.255.0 brd 10.10.60.255" )
routes_eth0=( "10.10.60.0/24 via 10.10.60.1" )
*
And here are my current routes:
*
Code:
-------------------------------------------------------------------------------------
Kernel IP routing table
Destination**** Gateway******** Genmask******** Flags Metric Ref*** Use Iface
10.10.20.0***** 10.10.50.1***** 255.255.255.0** UG*** 0***** 0******* 0 eth1
10.10.50.0***** 10.10.50.1***** 255.255.255.0** UG*** 0***** 0******* 0 eth1
10.10.50.0***** 0.0.0.0******** 255.255.255.0** U**** 0***** 0******* 0 eth1
10.10.1.0****** 10.10.50.1***** 255.255.255.0** UG*** 0***** 0******* 0 eth1
10.10.30.0***** 10.10.50.1***** 255.255.255.0** UG*** 0***** 0******* 0 eth1
10.10.60.0***** 10.10.60.1***** 255.255.255.0** UG*** 0***** 0******* 0 eth0
10.10.60.0***** 0.0.0.0******** 255.255.255.0** U**** 0***** 0******* 0 eth0
10.10.10.0***** 10.10.50.1***** 255.255.255.0** UG*** 0***** 0******* 0 eth1
127.0.0.0****** 0.0.0.0******** 255.0.0.0****** U**** 0***** 0******* 0 lo
0.0.0.0******** 10.10.50.1***** 0.0.0.0******** UG*** 0***** 0******* 0 eth1
*
Anything else I need to do or change?
*
Thank you for your time.
*
Regards,
Chris K.
*
 

Thread Tools




All times are GMT. The time now is 07:13 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org