howto increase INODE
 

Hi All,

I just install sparc machine. i found error "failed: No space left on device
(28)" when i check inode by df -i command

livecd ~ # df -i
Filesystem Inodes IUsed IFree IUse% Mounted on
tmpfs 129412 4684 124728 4% /
/dev/hda 0 0 0 - /mnt/cdrom
/dev/loop0 14486 14486 0 100% /mnt/livecd
udev 129412 1399 128013 2% /dev
tmpfs 129412 81 129331 1% /mnt/livecd/lib/firmware
tmpfs 129412 1 129411 1% /mnt/livecd/usr/portage
/dev/sda1 32768 2407 30361 8% /mnt/gentoo
/dev/sda4 131072 131072 0 100% /mnt/gentoo/usr
/dev/sda5 131072 3007 128065 3% /mnt/gentoo/var
/dev/sda6 1896832 12 1896820 1% /mnt/gentoo/home


livecd ~ # df -h
Filesystem Size Used Avail Use% Mounted on
tmpfs 1012M 36M 976M 4% /
/dev/hda 58M 58M 0 100% /mnt/cdrom
/dev/loop0 49M 49M 0 100% /mnt/livecd
udev 10M 384K 9.7M 4% /dev
tmpfs 1012M 4.0M 1008M 1% /mnt/livecd/lib/firmware
tmpfs 1012M 0 1012M 0% /mnt/livecd/usr/portage
/dev/sda1 504M 55M 424M 12% /mnt/gentoo
/dev/sda4 2.0G 952M 963M 50% /mnt/gentoo/usr
/dev/sda5 2.0G 83M 1.8G 5% /mnt/gentoo/var
/dev/sda6 29G 173M 27G 1% /mnt/gentoo/home

How to increase or solve this problem

Best Regards,

ti

----- Original Message -----
From: <meino.cramer@gmx.de>

To: "Gentoo" <gentoo-user@lists.gentoo.org>
Sent: Wednesday, May 26, 2010 10:15 AM
Subject: [gentoo-user] Harddisk trouble ... or not yet?




Hi,

currently I set up a freshly new gentoo system "from scratch"
on another harddisk.

For that purpose I have two WDC WD10EARS-00Y5B1 (pasted from
hdparm -i) harddisk (1TB, advanced format 4096 kb sectors).
One harddisk is currently holding the gento system, the other
one is intended as a bare plain copy of the other one (a backup
while setting up the system).

With an old KNOPPIX dvd I tried to copy the first hd onto
the other one with

dd if=/dev/sda of=/dev/sdb bs=8192

which gave me a LOT of I/O errors after a short time.

Still hopeing, that my hardware (motherboard/chipset/bios) and
the hd are ok I am trying to figure out, what the reason was
for that...

My motherboard is an Asus AV8.



From what kernel version the new advanced format
of the hd is fully supported ?

Are there other reasons -- beside defective hardware -- for
the failing dd and how can I fix them ?




Thank you very much in advance for any help!
best regards
mcc




--
Please don't send me any Word- or Powerpoint-Attachments
unless it's absolutely neccessary. - Send simply Text.
See http://www.gnu.org/philosophy/no-word-attachments.html
In a world without fences and walls nobody needs gates and windows.

howto increase INODE
 

On Wed, May 26, 2010 at 01:38:46PM +0700, kitti jaisong wrote:
> Hi All,
>
> I just install sparc machine. i found error "failed: No space left on device
> (28)" when i check inode by df -i command
> livecd ~ # df -i
> Filesystem Inodes IUsed IFree IUse% Mounted on
> tmpfs 129412 4684 124728 4% /
> /dev/hda 0 0 0 - /mnt/cdrom
> /dev/loop0 14486 14486 0 100% /mnt/livecd
> udev 129412 1399 128013 2% /dev
> tmpfs 129412 81 129331 1% /mnt/livecd/lib/firmware
> tmpfs 129412 1 129411 1% /mnt/livecd/usr/portage
> /dev/sda1 32768 2407 30361 8% /mnt/gentoo
> /dev/sda4 131072 131072 0 100% /mnt/gentoo/usr
> /dev/sda5 131072 3007 128065 3% /mnt/gentoo/var
> /dev/sda6 1896832 12 1896820 1% /mnt/gentoo/home
>
>
> livecd ~ # df -h
> Filesystem Size Used Avail Use% Mounted on
> tmpfs 1012M 36M 976M 4% /
> /dev/hda 58M 58M 0 100% /mnt/cdrom
> /dev/loop0 49M 49M 0 100% /mnt/livecd
> udev 10M 384K 9.7M 4% /dev
> tmpfs 1012M 4.0M 1008M 1% /mnt/livecd/lib/firmware
> tmpfs 1012M 0 1012M 0% /mnt/livecd/usr/portage
> /dev/sda1 504M 55M 424M 12% /mnt/gentoo
> /dev/sda4 2.0G 952M 963M 50% /mnt/gentoo/usr
> /dev/sda5 2.0G 83M 1.8G 5% /mnt/gentoo/var
> /dev/sda6 29G 173M 27G 1% /mnt/gentoo/home
>
> How to increase or solve this problem
Only things I can think of:
1. delete some files (probably not possible on usr partition) ;
2. backup your partition, and rerun mkfs.ext2 or mkfs.ext3 and
use the -i option (see man page)

Some advice is given in the handbook on creating partitions to
install gentoo.

http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#book_part1_chap4

Regards,
Bert

>
> Best Regards,
>
> ti
>
> ----- Original Message -----
> From: <meino.cramer@gmx.de>
> To: "Gentoo" <gentoo-user@lists.gentoo.org>
> Sent: Wednesday, May 26, 2010 10:15 AM
> Subject: [gentoo-user] Harddisk trouble ... or not yet?
>
>
> >
> > Hi,
> >
> > currently I set up a freshly new gentoo system "from scratch"
> > on another harddisk.
> >
> > For that purpose I have two WDC WD10EARS-00Y5B1 (pasted from
> > hdparm -i) harddisk (1TB, advanced format 4096 kb sectors).
> > One harddisk is currently holding the gento system, the other
> > one is intended as a bare plain copy of the other one (a backup
> > while setting up the system).
> >
> > With an old KNOPPIX dvd I tried to copy the first hd onto
> > the other one with
> >
> > dd if=/dev/sda of=/dev/sdb bs=8192
> >
> > which gave me a LOT of I/O errors after a short time.
> >
> > Still hopeing, that my hardware (motherboard/chipset/bios) and
> > the hd are ok I am trying to figure out, what the reason was
> > for that...
> >
> > My motherboard is an Asus AV8.
> >
> >
> >
> > From what kernel version the new advanced format
> > of the hd is fully supported ?
> >
> > Are there other reasons -- beside defective hardware -- for
> > the failing dd and how can I fix them ?
> >
> >
> >
> >
> > Thank you very much in advance for any help!
> > best regards
> > mcc
> >
> >
> >
> >
> > --
> > Please don't send me any Word- or Powerpoint-Attachments
> > unless it's absolutely neccessary. - Send simply Text.
> > See http://www.gnu.org/philosophy/no-word-attachments.html
> > In a world without fences and walls nobody needs gates and windows.
> >
> >
>
>