FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Gentoo > Gentoo User

 
 
LinkBack Thread Tools
 
Old 01-01-2010, 12:48 PM
Michael Sullivan
 
Default Externel drive should be /dev/sda1, but /dev/sda1 does not exist

Hello

My wife's computer is pretty slow, so I've attached and old hard drive
into a hard drive enclosure and hooked it into her USB port for
additional swap space. It used to work. The swap space is supposed to
be /dev/sda1. The problem is that for some reason when I rebooted this
morning with a new kernel, /dev/sda does not exist anymore. I'm at a
lost as to what to do now. Here's dmesg, or at least the parts
portaining to usb devices:

catherine dev # dmesg | grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usb usb1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
usb usb2: configuration #1 chosen from 1 choice
usb usb3: configuration #1 chosen from 1 choice
usb usb4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 3-2: new full speed USB device using ohci_hcd and address 2
usb 3-2: device descriptor read/64, error -62
usb 3-2: device descriptor read/64, error -62
usb 3-2: new full speed USB device using ohci_hcd and address 3
usb 3-2: device descriptor read/64, error -62
usb 3-2: device descriptor read/64, error -62
usb 3-2: new full speed USB device using ohci_hcd and address 4
usb 3-2: device not accepting address 4, error -62
usb 3-2: new full speed USB device using ohci_hcd and address 5
usb 3-2: device not accepting address 5, error -62

and here is lsmod:

catherine dev # lsmod
Module Size Used by
nfsd 212004 9
xt_DSCP 2676 17
xt_multiport 2512 4
xt_tcpudp 2528 55
iptable_nat 4308 1
nf_nat 16104 1 iptable_nat
xt_limit 2036 27
nf_conntrack_ipv4 11692 18 iptable_nat,nf_nat
nf_defrag_ipv4 1668 1 nf_conntrack_ipv4
xt_state 1780 15
nf_conntrack 60044 4
iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
ipt_LOG 4896 27
iptable_mangle 2268 1
xt_string 1764 0
ipt_ULOG 5784 0
iptable_filter 2260 1
ip_tables 10264 3
iptable_nat,iptable_mangle,iptable_filter
x_tables 14684 10
xt_DSCP,xt_multiport,xt_tcpudp,iptable_nat,xt_limi t,xt_state,ipt_LOG,xt_string,ipt_ULOG,ip_tables
ipv6 216088 20
snd_pcm_oss 30740 0
snd_mixer_oss 13456 2 snd_pcm_oss
snd_seq_oss 23496 0
snd_seq_midi_event 6312 1 snd_seq_oss
snd_seq 42988 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6352 2 snd_seq_oss,snd_seq
lp 8184 0
snd_intel8x0 26864 1
snd_ac97_codec 93624 1 snd_intel8x0
ac97_bus 1456 1 snd_ac97_codec
snd_pcm 60476 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
sis900 17960 0
ppdev 5752 0
mii 4736 1 sis900
shpchp 27540 0
pcspkr 2204 0
processor 35088 0
pci_hotplug 24584 1 shpchp
snd_timer 18172 2 snd_seq,snd_pcm
sis_agp 6640 1
agpgart 31260 1 sis_agp
snd 51020 9
snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_ seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd _timer
snd_page_alloc 8168 2 snd_intel8x0,snd_pcm
button 5192 0
rtc_cmos 9432 0
floppy 47372 0
fan 4084 0
rtc_core 15912 1 rtc_cmos
rtc_lib 2620 1 rtc_core
thermal 12828 0
parport_pc 32580 1
thermal_sys 12432 3 processor,fan,thermal
tg3 95332 0
libphy 21256 1 tg3
e1000 103876 0
fuse 52728 0
xfs 428276 0
exportfs 3764 2 nfsd,xfs
nfs 228192 1
auth_rpcgss 33564 2 nfsd,nfs
nfs_acl 2612 2 nfsd,nfs
lockd 59124 2 nfsd,nfs
sunrpc 169108 15 nfsd,nfs,auth_rpcgss,nfs_acl,lockd
jfs 151124 0
raid10 19696 0
dm_bbr 9656 0
dm_snapshot 22180 0
dm_crypt 11148 0
dm_mirror 13076 0
dm_region_hash 10704 1 dm_mirror
dm_log 8680 2 dm_mirror,dm_region_hash
dm_mod 57896 5
dm_bbr,dm_snapshot,dm_crypt,dm_mirror,dm_log
scsi_wait_scan 1056 0
sbp2 19648 0
ohci1394 26352 0
ieee1394 75548 2 sbp2,ohci1394
sl811_hcd 9408 0
usbhid 31684 0
ohci_hcd 21528 0
ssb 38308 1 ohci_hcd
uhci_hcd 19248 0
usb_storage 49012 0
ehci_hcd 30756 0
usbcore 125412 7
sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehc i_hcd
aic94xx 63056 0
libsas 40312 1 aic94xx
lpfc 335680 0
qla2xxx 198228 0
megaraid_sas 28672 0
megaraid_mbox 27444 0
megaraid_mm 8140 1 megaraid_mbox
megaraid 37876 0
aacraid 61408 0
sx8 13232 0
DAC960 61252 0
cciss 83956 0
3w_9xxx 28080 0
3w_xxxx 21528 0
mptsas 44696 0
scsi_transport_sas 25004 3 aic94xx,libsas,mptsas
mptfc 14444 0
scsi_transport_fc 39252 3 lpfc,qla2xxx,mptfc
scsi_tgt 10984 1 scsi_transport_fc
mptspi 15484 0
mptscsih 28516 3 mptsas,mptfc,mptspi
mptbase 78172 4 mptsas,mptfc,mptspi,mptscsih
atp870u 25132 0
dc395x 29184 0
qla1280 20272 0
imm 8980 0
parport 31484 4 lp,ppdev,parport_pc,imm
dmx3191d 9472 0
sym53c8xx 65888 0
qlogicfas408 6292 0
gdth 76584 0
advansys 52732 0
initio 15264 0
BusLogic 20632 0
arcmsr 19832 0
aic7xxx 104240 0
aic79xx 109548 0
scsi_transport_spi 20276 5
mptspi,dmx3191d,sym53c8xx,aic7xxx,aic79xx
sg 25136 0
pdc_adma 6208 0
sata_inic162x 8328 0
sata_mv 24500 0
ata_piix 22152 0
ahci 32120 0
sata_qstor 6324 0
sata_vsc 5036 0
sata_uli 3824 0
sata_sis 4840 0
sata_sx4 9144 0
sata_nv 20180 0
sata_via 8304 0
sata_svw 4856 0
sata_sil24 11980 0
sata_sil 8344 0
sata_promise 9908 0
pata_pcmcia 10796 0
pcmcia 31232 2 ssb,pata_pcmcia
pcmcia_core 32096 2 ssb,pcmcia

I don't know if I just don't have the right drivers loaded or installed
or what, but this is a problem. My mother-in-law is coming today and
she's the type of person who will be scared off if something doesn't
work right. We don't want her scared off. She's a Windows user, so
this is kind of a big deal for us. Thank you for your help. Please let
me know if there's any other information you need in order to help me...
-Michael Sullivan-
 
Old 01-01-2010, 01:12 PM
Alan McKinnon
 
Default Externel drive should be /dev/sda1, but /dev/sda1 does not exist

On Friday 01 January 2010 15:48:52 Michael Sullivan wrote:
> Hello
>
> My wife's computer is pretty slow, so I've attached and old hard drive
> into a hard drive enclosure and hooked it into her USB port for
> additional swap space. It used to work. The swap space is supposed to
> be /dev/sda1. The problem is that for some reason when I rebooted this
> morning with a new kernel, /dev/sda does not exist anymore. I'm at a
> lost as to what to do now. Here's dmesg, or at least the parts
> portaining to usb devices:

does it make a difference if you disable CONFIG_USB_SUSPEND, which can be done
by reloading the module "usbcore" with the option "autosuspend=-1" ?


>
> catherine dev # dmesg | grep usb
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> usb usb1: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver usb-storage
> usb usb2: configuration #1 chosen from 1 choice
> usb usb3: configuration #1 chosen from 1 choice
> usb usb4: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> usbhid: v2.6:USB HID core driver
> usb 3-2: new full speed USB device using ohci_hcd and address 2
> usb 3-2: device descriptor read/64, error -62
> usb 3-2: device descriptor read/64, error -62
> usb 3-2: new full speed USB device using ohci_hcd and address 3
> usb 3-2: device descriptor read/64, error -62
> usb 3-2: device descriptor read/64, error -62
> usb 3-2: new full speed USB device using ohci_hcd and address 4
> usb 3-2: device not accepting address 4, error -62
> usb 3-2: new full speed USB device using ohci_hcd and address 5
> usb 3-2: device not accepting address 5, error -62
>
> and here is lsmod:
>
> catherine dev # lsmod
> Module Size Used by
> nfsd 212004 9
> xt_DSCP 2676 17
> xt_multiport 2512 4
> xt_tcpudp 2528 55
> iptable_nat 4308 1
> nf_nat 16104 1 iptable_nat
> xt_limit 2036 27
> nf_conntrack_ipv4 11692 18 iptable_nat,nf_nat
> nf_defrag_ipv4 1668 1 nf_conntrack_ipv4
> xt_state 1780 15
> nf_conntrack 60044 4
> iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
> ipt_LOG 4896 27
> iptable_mangle 2268 1
> xt_string 1764 0
> ipt_ULOG 5784 0
> iptable_filter 2260 1
> ip_tables 10264 3
> iptable_nat,iptable_mangle,iptable_filter
> x_tables 14684 10
> xt_DSCP,xt_multiport,xt_tcpudp,iptable_nat,xt_limi t,xt_state,ipt_LOG,xt_str
> ing,ipt_ULOG,ip_tables ipv6 216088 20
> snd_pcm_oss 30740 0
> snd_mixer_oss 13456 2 snd_pcm_oss
> snd_seq_oss 23496 0
> snd_seq_midi_event 6312 1 snd_seq_oss
> snd_seq 42988 4 snd_seq_oss,snd_seq_midi_event
> snd_seq_device 6352 2 snd_seq_oss,snd_seq
> lp 8184 0
> snd_intel8x0 26864 1
> snd_ac97_codec 93624 1 snd_intel8x0
> ac97_bus 1456 1 snd_ac97_codec
> snd_pcm 60476 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
> sis900 17960 0
> ppdev 5752 0
> mii 4736 1 sis900
> shpchp 27540 0
> pcspkr 2204 0
> processor 35088 0
> pci_hotplug 24584 1 shpchp
> snd_timer 18172 2 snd_seq,snd_pcm
> sis_agp 6640 1
> agpgart 31260 1 sis_agp
> snd 51020 9
> snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_ seq_device,snd_intel8x0,s
> nd_ac97_codec,snd_pcm,snd_timer snd_page_alloc 8168 2
> snd_intel8x0,snd_pcm
> button 5192 0
> rtc_cmos 9432 0
> floppy 47372 0
> fan 4084 0
> rtc_core 15912 1 rtc_cmos
> rtc_lib 2620 1 rtc_core
> thermal 12828 0
> parport_pc 32580 1
> thermal_sys 12432 3 processor,fan,thermal
> tg3 95332 0
> libphy 21256 1 tg3
> e1000 103876 0
> fuse 52728 0
> xfs 428276 0
> exportfs 3764 2 nfsd,xfs
> nfs 228192 1
> auth_rpcgss 33564 2 nfsd,nfs
> nfs_acl 2612 2 nfsd,nfs
> lockd 59124 2 nfsd,nfs
> sunrpc 169108 15 nfsd,nfs,auth_rpcgss,nfs_acl,lockd
> jfs 151124 0
> raid10 19696 0
> dm_bbr 9656 0
> dm_snapshot 22180 0
> dm_crypt 11148 0
> dm_mirror 13076 0
> dm_region_hash 10704 1 dm_mirror
> dm_log 8680 2 dm_mirror,dm_region_hash
> dm_mod 57896 5
> dm_bbr,dm_snapshot,dm_crypt,dm_mirror,dm_log
> scsi_wait_scan 1056 0
> sbp2 19648 0
> ohci1394 26352 0
> ieee1394 75548 2 sbp2,ohci1394
> sl811_hcd 9408 0
> usbhid 31684 0
> ohci_hcd 21528 0
> ssb 38308 1 ohci_hcd
> uhci_hcd 19248 0
> usb_storage 49012 0
> ehci_hcd 30756 0
> usbcore 125412 7
> sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehc i_hcd
> aic94xx 63056 0
> libsas 40312 1 aic94xx
> lpfc 335680 0
> qla2xxx 198228 0
> megaraid_sas 28672 0
> megaraid_mbox 27444 0
> megaraid_mm 8140 1 megaraid_mbox
> megaraid 37876 0
> aacraid 61408 0
> sx8 13232 0
> DAC960 61252 0
> cciss 83956 0
> 3w_9xxx 28080 0
> 3w_xxxx 21528 0
> mptsas 44696 0
> scsi_transport_sas 25004 3 aic94xx,libsas,mptsas
> mptfc 14444 0
> scsi_transport_fc 39252 3 lpfc,qla2xxx,mptfc
> scsi_tgt 10984 1 scsi_transport_fc
> mptspi 15484 0
> mptscsih 28516 3 mptsas,mptfc,mptspi
> mptbase 78172 4 mptsas,mptfc,mptspi,mptscsih
> atp870u 25132 0
> dc395x 29184 0
> qla1280 20272 0
> imm 8980 0
> parport 31484 4 lp,ppdev,parport_pc,imm
> dmx3191d 9472 0
> sym53c8xx 65888 0
> qlogicfas408 6292 0
> gdth 76584 0
> advansys 52732 0
> initio 15264 0
> BusLogic 20632 0
> arcmsr 19832 0
> aic7xxx 104240 0
> aic79xx 109548 0
> scsi_transport_spi 20276 5
> mptspi,dmx3191d,sym53c8xx,aic7xxx,aic79xx
> sg 25136 0
> pdc_adma 6208 0
> sata_inic162x 8328 0
> sata_mv 24500 0
> ata_piix 22152 0
> ahci 32120 0
> sata_qstor 6324 0
> sata_vsc 5036 0
> sata_uli 3824 0
> sata_sis 4840 0
> sata_sx4 9144 0
> sata_nv 20180 0
> sata_via 8304 0
> sata_svw 4856 0
> sata_sil24 11980 0
> sata_sil 8344 0
> sata_promise 9908 0
> pata_pcmcia 10796 0
> pcmcia 31232 2 ssb,pata_pcmcia
> pcmcia_core 32096 2 ssb,pcmcia
>
> I don't know if I just don't have the right drivers loaded or installed
> or what, but this is a problem. My mother-in-law is coming today and
> she's the type of person who will be scared off if something doesn't
> work right. We don't want her scared off. She's a Windows user, so
> this is kind of a big deal for us. Thank you for your help. Please let
> me know if there's any other information you need in order to help me...
> -Michael Sullivan-
>

--
alan dot mckinnon at gmail dot com
 
Old 01-01-2010, 01:56 PM
Michael Sullivan
 
Default Externel drive should be /dev/sda1, but /dev/sda1 does not exist

On Fri, 2010-01-01 at 16:12 +0200, Alan McKinnon wrote:
> On Friday 01 January 2010 15:48:52 Michael Sullivan wrote:
> > Hello
> >
> > My wife's computer is pretty slow, so I've attached and old hard drive
> > into a hard drive enclosure and hooked it into her USB port for
> > additional swap space. It used to work. The swap space is supposed to
> > be /dev/sda1. The problem is that for some reason when I rebooted this
> > morning with a new kernel, /dev/sda does not exist anymore. I'm at a
> > lost as to what to do now. Here's dmesg, or at least the parts
> > portaining to usb devices:
>
> does it make a difference if you disable CONFIG_USB_SUSPEND, which can be done
> by reloading the module "usbcore" with the option "autosuspend=-1" ?
>

catherine dev # modprobe usbcore autosuspend=-1
catherine dev # ls /dev/sda1
ls: cannot access /dev/sda1: No such file or directory



Did I do this right?
 
Old 01-01-2010, 06:37 PM
walt
 
Default Externel drive should be /dev/sda1, but /dev/sda1 does not exist

On 01/01/2010 05:48 AM, Michael Sullivan wrote:

Hello

My wife's computer is pretty slow, so I've attached and old hard drive
into a hard drive enclosure and hooked it into her USB port for
additional swap space. It used to work. The swap space is supposed to
be /dev/sda1. The problem is that for some reason when I rebooted this
morning with a new kernel, /dev/sda does not exist anymore...


Hm. So the only thing you changed was the new kernel? Might help to
know why you built the new kernel. What problem were you solving by
doing it?

I would try booting the machine without the USB swap disk and then
hotplug it when the machine is already running. What does dmesg say
then? Can be simpler to interpret when you know exactly which lines
were printed in response to the newly connected drive.
 
Old 01-02-2010, 01:35 PM
Michael Sullivan
 
Default Externel drive should be /dev/sda1, but /dev/sda1 does not exist

On Fri, 2010-01-01 at 11:37 -0800, walt wrote:
> On 01/01/2010 05:48 AM, Michael Sullivan wrote:
> > Hello
> >
> > My wife's computer is pretty slow, so I've attached and old hard drive
> > into a hard drive enclosure and hooked it into her USB port for
> > additional swap space. It used to work. The swap space is supposed to
> > be /dev/sda1. The problem is that for some reason when I rebooted this
> > morning with a new kernel, /dev/sda does not exist anymore...
>
> Hm. So the only thing you changed was the new kernel? Might help to
> know why you built the new kernel. What problem were you solving by
> doing it?
>
OK here goes. I built the new kernel because with the old one /dev/sda
didn't seem to exist when I know it should. And besides, there was a
newer kernel marked as stable and aren't we always supposed to use the
newest stable kernel for security reasons, unless there's something that
we need done that the new kernel doesn't do?

> I would try booting the machine without the USB swap disk and then
> hotplug it when the machine is already running. What does dmesg say
> then? Can be simpler to interpret when you know exactly which lines
> were printed in response to the newly connected drive.


I rebooted the machine with the drive unplugged and ran dmesg:

catherine ~ # cat dmesg.txt
Initializing cgroup subsys cpuset
Linux version 2.6.31-gentoo-r6 (root@catherine) (gcc version 4.3.4
(Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Dec 31 19:13:07 CST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
last_pfn = 0xdff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FF0000000 write-back
1 base 00E000000 mask FFE000000 uncachable
2 base 0D0000000 mask FF8000000 write-combining
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
initial memory mapped : 0 - 00800000
init_memory_mapping: 0000000000000000-000000000dff0000
0000000000 - 0000400000 page 4k
0000400000 - 000dc00000 page 2M
000dc00000 - 000dff0000 page 4k
kernel direct mapping tables up to dff0000 @ 10000-15000
RAMDISK: 0dcc5000 - 0dfdf8aa
ACPI: RSDP 000f7170 00014 (v00 AWARD )
ACPI: RSDT 0dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0dff30c0 038FA (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 0dff0000 00040
ACPI: APIC 0dff69c0 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
223MB LOWMEM available.
mapped low ram: 0 - 0dff0000
low ram: 0 - 0dff0000
node 0 low ram: 00000000 - 0dff0000
node 0 bootmap 00011000 - 00012c00
(9 early reservations) ==> bootmem [0000000000 - 000dff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
#3 [0000100000 - 0000637f00] TEXT DATA BSS ==> [0000100000 -
0000637f00]
#4 [000dcc5000 - 000dfdf8aa] RAMDISK ==> [000dcc5000 -
000dfdf8aa]
#5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 -
0000100000]
#6 [0000638000 - 000063a06a] BRK ==> [0000638000 -
000063a06a]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 -
0000011000]
#8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 -
0000013000]
found SMP MP-table at [c00f57a0] f57a0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0000dff0
HighMem 0x0000dff0 -> 0x0000dff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0000dff0
On node 0 totalpages: 57215
free_area_init_node: node 0, pgdat c0561da0, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 416 pages used for memmap
Normal zone: 52816 pages, LIFO batch:15
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at e000000 (gap: e000000:f0c00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 15 pages at c11c2000, static data 38684 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
56767
Kernel command line: real_root=/dev/hdc6 udev
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 218040k/229312k available (3005k kernel code, 10620k reserved,
1508k data, 428k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xce7f0000 - 0xff7fe000 ( 784 MB)
lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
.init : 0xc0569000 - 0xc05d4000 ( 428 kB)
.data : 0xc03ef6c0 - 0xc05688a8 (1508 kB)
.text : 0xc0100000 - 0xc03ef6c0 (3005 kB)
Checking if this processor honours the WP bit even in supervisor
mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:512
CPU 0 irqstacks, hard=c11c2000 soft=c11c3000
Fast TSC calibration using PIT
Detected 1662.338 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer
frequency.. 3324.67 BogoMIPS (lpj=16623380)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
mce: CPU supports 4 MCE banks
Performance Counters: AMD PMU driver.
... version: 0
... bit width: 48
... generic counters: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose counters: 0
... counter mask: 000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 25k freed
ACPI: Core revision 20090521
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Sempron(tm) 2400+ stepping 01
Brought up 1 CPUs
Total of 1 processors activated (3324.67 BogoMIPS).
CPU0 attaching NULL sched-domain.
Booting paravirtualized kernel on bare hardware
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 4598.000 MB/sec
xor: using function: pIII_sse (4598.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.8
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff]
pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff]
pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff]
pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff]
pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:00:04.0: reg 14 32bit mmio: [0xe1103000-0xe1103fff]
pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff]
pci 0000:01:00.0: reg 18 io port: [0xd000-0xd07f]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
raid6: int32x1 433 MB/s
raid6: int32x2 652 MB/s
raid6: int32x4 573 MB/s
raid6: int32x8 458 MB/s
raid6: mmxx1 1356 MB/s
raid6: mmxx2 2433 MB/s
raid6: sse1x1 1276 MB/s
raid6: sse1x2 2020 MB/s
raid6: using algorithm sse1x2 (2020 MB/s)
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved
system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x805 has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xe1000000-0xe10fffff
pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff]
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3178k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1262420890.810:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 432
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
pci 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01)
sis5513 0000:00:02.5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4000-0x4007
ide1: BM-DMA at 0x4008-0x400f
Probing IDE interface ide0...
hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
Probing IDE interface ide1...
hdc: WDC WD800BB-00JHC0, ATA DISK drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: host side 80-wire cable detection failed, limiting max speed to
UDMA33
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
ide-gd driver 1.18
hdc: max request size: 128KiB
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
hdc: cache flushes supported
hdc: hdc1 hdc3 hdc4 < hdc5 hdc6 >
ide-cd driver 5.00
ide-cd: hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 428k freed
input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input1
input: ImPS/2 Generic Wheel Mouse
as /devices/platform/i8042/serio1/input/input2
NCR53c406a: no available ports found
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
qlogicfas: no cards were found, please specify I/O address and IRQ using
iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
NCR53c406a: no available ports found
imm: Version 2.05 (for Linux 2.4.0)
sym53c416.c: Version 1.0.0-ac
Fusion MPT base driver 3.04.10
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.10
Fusion MPT FC Host driver 3.04.10
Fusion MPT SAS Host driver 3.04.10
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[2461]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.03.01-k4
Emulex LightPulse Fibre Channel SCSI driver 8.3.3
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
md: raid10 personality registered for level 10
JFS: nTxBlock = 1733, nTxLock = 13867
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SGI XFS with ACLs, security attributes, realtime, large block/inode
numbers, no debug enabled
SGI XFS Quota Management subsystem
fuse init (API version 7.12)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
udev: starting version 146
IT8705 SuperIO detected.
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
FDC 0 is a post-1991 82077
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Power Button
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Sleep Button
as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [FUTS]
Linux agpgart interface v0.103
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
agpgart-sis 0000:00:00.0: SiS chipset [1039/0741]
agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
processor LNXCPU:00: registered as cooling_device1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: PC Speaker as /devices/platform/pcspkr/input/input6
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ppdev: user-space parallel port driver
Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sis900.c: v1.08.10 Apr. 2 2006
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 242 bytes nvram
intel8x0_measure_ac97_clock: measured 59902 usecs (2881 samples)
intel8x0: clocking to 48000
sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:11:5b:84:60:3b
EXT3 FS on hdc6, internal journal
lp0: using parport0 (interrupt-driven).
Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1 across:248968k
eth0: Media Link On 100mbps full-duplex
warning: `named' uses 32-bit capabilities (legacy support in use)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (3583 buckets, 14332 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option
or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
svc: failed to register lockdv1 RPC service (errno 97).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
catherine ~ #

and then plugged in:

catherine ~ # cat dmesg-new.txt
Initializing cgroup subsys cpuset
Linux version 2.6.31-gentoo-r6 (root@catherine) (gcc version 4.3.4
(Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Dec 31 19:13:07 CST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
last_pfn = 0xdff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FF0000000 write-back
1 base 00E000000 mask FFE000000 uncachable
2 base 0D0000000 mask FF8000000 write-combining
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
initial memory mapped : 0 - 00800000
init_memory_mapping: 0000000000000000-000000000dff0000
0000000000 - 0000400000 page 4k
0000400000 - 000dc00000 page 2M
000dc00000 - 000dff0000 page 4k
kernel direct mapping tables up to dff0000 @ 10000-15000
RAMDISK: 0dcc5000 - 0dfdf8aa
ACPI: RSDP 000f7170 00014 (v00 AWARD )
ACPI: RSDT 0dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0dff30c0 038FA (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 0dff0000 00040
ACPI: APIC 0dff69c0 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
223MB LOWMEM available.
mapped low ram: 0 - 0dff0000
low ram: 0 - 0dff0000
node 0 low ram: 00000000 - 0dff0000
node 0 bootmap 00011000 - 00012c00
(9 early reservations) ==> bootmem [0000000000 - 000dff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
#3 [0000100000 - 0000637f00] TEXT DATA BSS ==> [0000100000 -
0000637f00]
#4 [000dcc5000 - 000dfdf8aa] RAMDISK ==> [000dcc5000 -
000dfdf8aa]
#5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 -
0000100000]
#6 [0000638000 - 000063a06a] BRK ==> [0000638000 -
000063a06a]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 -
0000011000]
#8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 -
0000013000]
found SMP MP-table at [c00f57a0] f57a0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0000dff0
HighMem 0x0000dff0 -> 0x0000dff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0000dff0
On node 0 totalpages: 57215
free_area_init_node: node 0, pgdat c0561da0, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 416 pages used for memmap
Normal zone: 52816 pages, LIFO batch:15
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at e000000 (gap: e000000:f0c00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 15 pages at c11c2000, static data 38684 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
56767
Kernel command line: real_root=/dev/hdc6 udev
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 218040k/229312k available (3005k kernel code, 10620k reserved,
1508k data, 428k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xce7f0000 - 0xff7fe000 ( 784 MB)
lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
.init : 0xc0569000 - 0xc05d4000 ( 428 kB)
.data : 0xc03ef6c0 - 0xc05688a8 (1508 kB)
.text : 0xc0100000 - 0xc03ef6c0 (3005 kB)
Checking if this processor honours the WP bit even in supervisor
mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:512
CPU 0 irqstacks, hard=c11c2000 soft=c11c3000
Fast TSC calibration using PIT
Detected 1662.338 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer
frequency.. 3324.67 BogoMIPS (lpj=16623380)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
mce: CPU supports 4 MCE banks
Performance Counters: AMD PMU driver.
... version: 0
... bit width: 48
... generic counters: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose counters: 0
... counter mask: 000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 25k freed
ACPI: Core revision 20090521
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Sempron(tm) 2400+ stepping 01
Brought up 1 CPUs
Total of 1 processors activated (3324.67 BogoMIPS).
CPU0 attaching NULL sched-domain.
Booting paravirtualized kernel on bare hardware
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 4598.000 MB/sec
xor: using function: pIII_sse (4598.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.8
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff]
pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff]
pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff]
pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff]
pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:00:04.0: reg 14 32bit mmio: [0xe1103000-0xe1103fff]
pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff]
pci 0000:01:00.0: reg 18 io port: [0xd000-0xd07f]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
raid6: int32x1 433 MB/s
raid6: int32x2 652 MB/s
raid6: int32x4 573 MB/s
raid6: int32x8 458 MB/s
raid6: mmxx1 1356 MB/s
raid6: mmxx2 2433 MB/s
raid6: sse1x1 1276 MB/s
raid6: sse1x2 2020 MB/s
raid6: using algorithm sse1x2 (2020 MB/s)
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved
system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x805 has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xe1000000-0xe10fffff
pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff]
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3178k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1262420890.810:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 432
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
pci 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01)
sis5513 0000:00:02.5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4000-0x4007
ide1: BM-DMA at 0x4008-0x400f
Probing IDE interface ide0...
hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
Probing IDE interface ide1...
hdc: WDC WD800BB-00JHC0, ATA DISK drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: host side 80-wire cable detection failed, limiting max speed to
UDMA33
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
ide-gd driver 1.18
hdc: max request size: 128KiB
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
hdc: cache flushes supported
hdc: hdc1 hdc3 hdc4 < hdc5 hdc6 >
ide-cd driver 5.00
ide-cd: hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 428k freed
input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input1
input: ImPS/2 Generic Wheel Mouse
as /devices/platform/i8042/serio1/input/input2
NCR53c406a: no available ports found
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
qlogicfas: no cards were found, please specify I/O address and IRQ using
iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
NCR53c406a: no available ports found
imm: Version 2.05 (for Linux 2.4.0)
sym53c416.c: Version 1.0.0-ac
Fusion MPT base driver 3.04.10
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.10
Fusion MPT FC Host driver 3.04.10
Fusion MPT SAS Host driver 3.04.10
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[2461]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.03.01-k4
Emulex LightPulse Fibre Channel SCSI driver 8.3.3
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
md: raid10 personality registered for level 10
JFS: nTxBlock = 1733, nTxLock = 13867
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SGI XFS with ACLs, security attributes, realtime, large block/inode
numbers, no debug enabled
SGI XFS Quota Management subsystem
fuse init (API version 7.12)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
udev: starting version 146
IT8705 SuperIO detected.
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
FDC 0 is a post-1991 82077
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Power Button
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Sleep Button
as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [FUTS]
Linux agpgart interface v0.103
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
agpgart-sis 0000:00:00.0: SiS chipset [1039/0741]
agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
processor LNXCPU:00: registered as cooling_device1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: PC Speaker as /devices/platform/pcspkr/input/input6
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ppdev: user-space parallel port driver
Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sis900.c: v1.08.10 Apr. 2 2006
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 242 bytes nvram
intel8x0_measure_ac97_clock: measured 59902 usecs (2881 samples)
intel8x0: clocking to 48000
sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:11:5b:84:60:3b
EXT3 FS on hdc6, internal journal
lp0: using parport0 (interrupt-driven).
Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1 across:248968k
eth0: Media Link On 100mbps full-duplex
warning: `named' uses 32-bit capabilities (legacy support in use)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (3583 buckets, 14332 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option
or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
svc: failed to register lockdv1 RPC service (errno 97).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
usb 1-6: new high speed USB device using ehci_hcd and address 2
usb 1-6: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
IPKF INPUT Catch-all: IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:1f:3a:15:c1:0d:08:00 SRC=192.168.1.104
DST=192.168.1.255 LEN=242 TOS=0x00 PREC=0x00 TTL=128 ID=25546 PROTO=UDP
SPT=138 DPT=138 LEN=222
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access WDC WD80 0JB-00JJC0 0811 PQ: 0
ANSI: 0
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI disk
IPKF INPUT Catch-all: IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:24:1e:5b:3b:c7:08:00 SRC=0.0.0.0
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=64 ID=12332 PROTO=UDP
SPT=68 DPT=67 LEN=308
IPKF INPUT Catch-all: IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:23:69:85:2f:40:08:00 SRC=192.168.1.1
DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
catherine ~ #


All I know is that at one time, the external drive was recognized
on /dev/sda and at that time I formatted the drive for swap space and
ran swapon /dev/sda1 Now for some reason it doesn't work. I want it to
work.
 
Old 01-02-2010, 02:25 PM
"Dirk Heinrichs"
 
Default Externel drive should be /dev/sda1, but /dev/sda1 does not exist

Am Freitag 01 Januar 2010 14:48:52 schrieb Michael Sullivan:

> My wife's computer is pretty slow, so I've attached and old hard drive
> into a hard drive enclosure and hooked it into her USB port for
> additional swap space. It used to work. The swap space is supposed to
> be /dev/sda1. The problem is that for some reason when I rebooted this
> morning with a new kernel, /dev/sda does not exist anymore.

Why don't you give it a fixed name, then? Google: "Writing udev rules".

Bye...

Dirk
 
Old 01-02-2010, 05:43 PM
walt
 
Default Externel drive should be /dev/sda1, but /dev/sda1 does not exist

On 01/02/2010 06:35 AM, Michael Sullivan wrote:

On Fri, 2010-01-01 at 11:37 -0800, walt wrote:

On 01/01/2010 05:48 AM, Michael Sullivan wrote:

Hello

My wife's computer is pretty slow, so I've attached and old hard drive
into a hard drive enclosure and hooked it into her USB port for
additional swap space. It used to work. The swap space is supposed to
be /dev/sda1. The problem is that for some reason when I rebooted this
morning with a new kernel, /dev/sda does not exist anymore...


Hm. So the only thing you changed was the new kernel? Might help to
know why you built the new kernel. What problem were you solving by
doing it?



OK here goes. I built the new kernel because with the old one /dev/sda
didn't seem to exist when I know it should...


IIUC, you built the new kernel to see if it would fix the missing sda
problem, but it didn't fix it. Is this correct?

Because sda does show up when you hotplug the drive after bootup, the
problem seems to be timing rather than a misconfigured kernel.

I also compile USB support as modules, and yet my USB sticks show up
properly after bootup. I do use the 'hotplug' package and start it
at the 'default' runlevel (though I confess I really don't know if I
need it). Do you have that package, or did you?

I assume your drive enclosure is self powered, i.e. it has its own
power switch?

I suspect that if you compile USB support into the kernel your missing
sda would reappear. Have you tried that?
 

Thread Tools




All times are GMT. The time now is 09:53 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org