FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Gentoo > Gentoo User

 
 
LinkBack Thread Tools
 
Old 12-14-2009, 03:08 PM
Philip Webb
 
Default X11 start breaks

091214 GerhardosG wrote:
> My graphics-card is a GeForce 7600 GT
> X11 start breaks with this messages in /var/log/Xorg.0.log :
...
> (II) UnloadModule: "evdev"

Just a quick suggestion: did you enable 'evdev' in your kernel ?

--
========================,,======================== ====================
SUPPORT ___________//___, Philip Webb
ELECTRIC /] [] [] [] [] []| Cities Centre, University of Toronto
TRANSIT `-O----------O---' purslowatchassdotutorontodotca
 
Old 12-14-2009, 03:12 PM
Marcus Wanner
 
Default X11 start breaks

On 12/14/2009 10:29 AM, GerhardosG wrote:

Hi ,

My graphics-card is a GeForce 7600 GT

X11 start breaks with this messages in /var/log/Xorg.0.log :


(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard"
(type: KEYBOARD)

(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"



tux ~ # lsmod

Module Size Used by
test_nx 1824 0
psmouse 37980 0
nvidia 9574140 0


What is wrong ???






Please attach all of /var/log/Xorg.0.log.

Marcus
 
Old 12-14-2009, 03:19 PM
Joshua Murphy
 
Default X11 start breaks

On Mon, Dec 14, 2009 at 10:29 AM, GerhardosG <gerhard.goessl@allgaeu.org> wrote:
> Hi ,
>
> My graphics-card is a GeForce 7600 GT
>
> X11 start breaks with this messages in /var/log/Xorg.0.log :
>
>
> (II) Initializing built-in extension DAMAGE
> (II) Initializing extension GLX
> (II) config/hal: Adding input device AT Translated Set 2 keyboard
> (II) LoadModule: "evdev"
> (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
> (II) Module evdev: vendor="X.Org Foundation"
> * * * compiled for 1.6.5, module version = 2.3.1
> * * * Module class: X.Org XInput Driver
> * * * ABI class: X.Org XInput driver, version 4.0
> (**) AT Translated Set 2 keyboard: always reports core events
> (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
> (II) AT Translated Set 2 keyboard: Found keys
> (II) AT Translated Set 2 keyboard: Configuring as keyboard
> (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard"
> (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) Option "xkb_model" "evdev"
> (**) Option "xkb_layout" "us"
> (II) config/hal: Adding input device Power Button
> (**) Power Button: always reports core events
> (**) Power Button: Device: "/dev/input/event1"
> (II) Power Button: Found keys
> (II) Power Button: Configuring as keyboard
> (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) Option "xkb_model" "evdev"
> (**) Option "xkb_layout" "us"
> (II) config/hal: Adding input device Power Button
> (**) Power Button: always reports core events
> (**) Power Button: Device: "/dev/input/event0"
> (II) Power Button: Found keys
> (II) Power Button: Configuring as keyboard
> (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) Option "xkb_model" "evdev"
> (**) Option "xkb_layout" "us"
> (II) Power Button: Close
> (II) UnloadModule: "evdev"
> (II) Power Button: Close
> (II) UnloadModule: "evdev"
> (II) AT Translated Set 2 keyboard: Close
> (II) UnloadModule: "evdev"
>
>
>
> tux ~ # lsmod
>
> Module * * * * * * * * *Size *Used by
> test_nx * * * * * * * * 1824 *0
> psmouse * * * * * * * *37980 *0
> nvidia * * * * * * * 9574140 *0
>
>
> What is wrong ???

Firstly, error lines in the Xorg.0.log start with (EE). Secondly, most
aren't entirely meaningful without the context around them. With the
information we have in your mail here, none of us is likely to to
divine what the source of your issue is. Given the whole Xorg.0.log,
we might be able to see something, though.

--
Poison [BLX]
Joshua M. Murphy
 
Old 12-14-2009, 03:57 PM
Mick
 
Default X11 start breaks

2009/12/14 GerhardosG <gerhard.goessl@allgaeu.org>:
> Hi ,
>
> My graphics-card is a GeForce 7600 GT
>
> X11 start breaks with this messages in /var/log/Xorg.0.log :
>
>
> (II) Initializing built-in extension DAMAGE
> (II) Initializing extension GLX
> (II) config/hal: Adding input device AT Translated Set 2 keyboard
> (II) LoadModule: "evdev"
> (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
> (II) Module evdev: vendor="X.Org Foundation"
> * * * compiled for 1.6.5, module version = 2.3.1
> * * * Module class: X.Org XInput Driver
> * * * ABI class: X.Org XInput driver, version 4.0
> (**) AT Translated Set 2 keyboard: always reports core events
> (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
> (II) AT Translated Set 2 keyboard: Found keys
> (II) AT Translated Set 2 keyboard: Configuring as keyboard
> (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard"
> (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) Option "xkb_model" "evdev"
> (**) Option "xkb_layout" "us"
> (II) config/hal: Adding input device Power Button
> (**) Power Button: always reports core events
> (**) Power Button: Device: "/dev/input/event1"
> (II) Power Button: Found keys
> (II) Power Button: Configuring as keyboard
> (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) Option "xkb_model" "evdev"
> (**) Option "xkb_layout" "us"
> (II) config/hal: Adding input device Power Button
> (**) Power Button: always reports core events
> (**) Power Button: Device: "/dev/input/event0"
> (II) Power Button: Found keys
> (II) Power Button: Configuring as keyboard
> (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) Option "xkb_model" "evdev"
> (**) Option "xkb_layout" "us"
> (II) Power Button: Close
> (II) UnloadModule: "evdev"
> (II) Power Button: Close
> (II) UnloadModule: "evdev"
> (II) AT Translated Set 2 keyboard: Close
> (II) UnloadModule: "evdev"
>
>
>
> tux ~ # lsmod
>
> Module * * * * * * * * *Size *Used by
> test_nx * * * * * * * * 1824 *0
> psmouse * * * * * * * *37980 *0
> nvidia * * * * * * * 9574140 *0
>
>
> What is wrong ???

Have a look at this previous thread:

http://article.gmane.org/gmane.linux.gentoo.user/224058

I suspect that you were using /etc/rc.conf to define a DE/WM to handle
your Xsession and this configuration file is no longer used by Gentoo.
--
Regards,
Mick
 
Old 12-14-2009, 05:04 PM
GerhardosG
 
Default X11 start breaks

Yes , I did enable evdev in kernel !!

( Not as module )

Philip Webb wrote:

091214 GerhardosG wrote:


My graphics-card is a GeForce 7600 GT
X11 start breaks with this messages in /var/log/Xorg.0.log :


...


(II) UnloadModule: "evdev"



Just a quick suggestion: did you enable 'evdev' in your kernel ?
 
Old 12-14-2009, 05:25 PM
GerhardosG
 
Default X11 start breaks

Hi,

My graphics-card is a GeForce 7600 GT


tux ~ # lsmod

Module Size Used by
test_nx 1824 0
psmouse 1980 0
nvidia 9574140 0



X11 start breaks with this messages in /var/log/Xorg.0.log :

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r6 i686
Current Operating System: Linux tux 2.6.31-gentoo-r6 #1 Fri Dec 11
15:05:30 GMT 2009 i686

Build Date: 12 December 2009 07:57:34PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 14 10:19:46 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Main Layout"
(**) |-->Screen "Screen MGA1" (0)
(**) | |-->Monitor "Generic Monitor"
(==) No device specified for screen "Screen MGA1".
Using the first device section listed.
(**) | |-->Device "nVidia GeForce"
(**) |-->Screen "Screen MGA2" (1)
(**) | |-->Monitor "Generic Monitor"
(==) No device specified for screen "Screen MGA2".
Using the first device section listed.
(**) | |-->Device "nVidia GeForce"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Mouse2"
(**) |-->Input Device "Keyboard1"
(**) Option "BlankTime" "10"
(**) Option "StandbyTime" "20"
(**) Option "SuspendTime" "30"
(**) Option "OffTime" "60"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/75dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:

(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
'vmmouse' will be disabled.

(WW) Disabling Mouse1
(WW) Disabling Mouse2
(WW) Disabling Keyboard1
(II) Loader magic: 0x1a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0391:1043:81f7 nVidia Corporation G70 [GeForce
7600 GT] rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456,
0xfc000000/16777216, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072

(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also
specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also
specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also
specified in the config file.

(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.36 Fri Aug 14 17:50:12 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:24:40 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X
extensions is

(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7600 GT (G73) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.73.22.15.01
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7600 GT at PCI:1:0:0:
(--) NVIDIA(0): Maxdata (RogenTech) Belinea101920 (CRT-0)
(--) NVIDIA(0): Maxdata (RogenTech) Belinea101920 (CRT-0): 400.0 MHz maximum
(--) NVIDIA(0): pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (87, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in
Appendix B: X

(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(WW) NVIDIA(0): Option "no accel" is not used
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard"
(type: KEYBOARD)

(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
tux ~
#
 
Old 12-14-2009, 05:33 PM
walt
 
Default X11 start breaks

Philip Webb wrote:
> 091214 GerhardosG wrote:
>> My graphics-card is a GeForce 7600 GT
>> X11 start breaks with this messages in /var/log/Xorg.0.log :
> ...
>> (II) UnloadModule: "evdev"
>
> Just a quick suggestion: did you enable 'evdev' in your kernel ?

And, if you just upgraded X11, did you recompile the evdev driver?
 
Old 12-14-2009, 07:28 PM
Alan McKinnon
 
Default X11 start breaks

On Monday 14 December 2009 20:25:25 GerhardosG wrote:
> Hi,
>
> My graphics-card is a GeForce 7600 GT
>
>
> tux ~ # lsmod
>
> Module Size Used by
> test_nx 1824 0
> psmouse 1980 0
> nvidia 9574140 0
>
>
>
> X11 start breaks with this messages in /var/log/Xorg.0.log :
>
> X.Org X Server 1.6.5
> Release Date: 2009-10-11
> X Protocol Version 11, Revision 0
> Build Operating System: Linux 2.6.31-gentoo-r6 i686
> Current Operating System: Linux tux 2.6.31-gentoo-r6 #1 Fri Dec 11
> 15:05:30 GMT 2009 i686
> Build Date: 12 December 2009 07:57:34PM
>
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 14 10:19:46 2009
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Main Layout"
> (**) |-->Screen "Screen MGA1" (0)
> (**) | |-->Monitor "Generic Monitor"
> (==) No device specified for screen "Screen MGA1".
> Using the first device section listed.
> (**) | |-->Device "nVidia GeForce"
> (**) |-->Screen "Screen MGA2" (1)
> (**) | |-->Monitor "Generic Monitor"
> (==) No device specified for screen "Screen MGA2".
> Using the first device section listed.
> (**) | |-->Device "nVidia GeForce"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Mouse2"
> (**) |-->Input Device "Keyboard1"
> (**) Option "BlankTime" "10"
> (**) Option "StandbyTime" "20"
> (**) Option "SuspendTime" "30"
> (**) Option "OffTime" "60"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (WW) The directory "/usr/share/fonts/local" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/misc" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/Type1" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/TTF" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/75dpi" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/100dpi" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/misc/" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/TTF/" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/OTF" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/Type1/" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
> Entry deleted from font path.
> (**) FontPath set to:
>
> (==) ModulePath set to "/usr/lib/xorg/modules"
> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
> 'vmmouse' will be disabled.
> (WW) Disabling Mouse1
> (WW) Disabling Mouse2
> (WW) Disabling Keyboard1

Ah, yes.

What we have here boys and girls is the old "I tell Xorg I don't have a
keyboard or a pointing device and yet I still expect Xorg to function
correctly" trick ....

Please post xorg.conf



--
alan dot mckinnon at gmail dot com
 
Old 12-14-2009, 08:08 PM
GerhardosG
 
Default X11 start breaks

Hi ,

recompile the evdev driver solved the problem NOT.



In the console, the output looks like this:




tux / # startx

xauth: creating new authority file /root/.serverauth.3072

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r6 i686
Current Operating System: Linux tux 2.6.31-gentoo-r6 #2 Mon Dec 14
21:40:46 GMT 2009 i686

Build Date: 12 December 2009 07:57:34PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 14 22:03:42 2009
(==) Using config file: "/etc/X11/xorg.conf"

(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
(EE) Failed to load module "dri" (module does not exist, 0)
(EE) Failed to load module "dri2" (module does not exist, 0)
expected keysym, got XF86TouchpadToggle: line 122 of inet
expected keysym, got XF86TouchpadToggle: line 122 of inet
expected keysym, got XF86TouchpadToggle: line 122 of inet
expected keysym, got XF86TouchpadToggle: line 122 of inet
/etc/X11/xinit/xinitrc: line 58: twm: command not found
/etc/X11/xinit/xinitrc: line 59: xclock: command not found
/etc/X11/xinit/xinitrc: line 60: xterm: command not found
/etc/X11/xinit/xinitrc: line 61: xterm: command not found
/etc/X11/xinit/xinitrc: line 62: exec: xterm: not found

waiting for X server to shut down

tux / #
 
Old 12-14-2009, 10:13 PM
Joshua Murphy
 
Default X11 start breaks

On Mon, Dec 14, 2009 at 4:08 PM, GerhardosG <gerhard.goessl@allgaeu.org> wrote:
> Hi ,
>
> recompile the evdev driver solved the problem NOT.
>
>
>
> In the console, the output looks like this:
>
>
>
>
> tux / # startx
>
> xauth: *creating new authority file /root/.serverauth.3072
>
> X.Org X Server 1.6.5
> Release Date: 2009-10-11
> X Protocol Version 11, Revision 0
> Build Operating System: Linux 2.6.31-gentoo-r6 i686
> Current Operating System: Linux tux 2.6.31-gentoo-r6 #2 Mon Dec 14 21:40:46
> GMT 2009 i686
> Build Date: 12 December 2009 *07:57:34PM
>
> * * * Before reporting problems, check http://wiki.x.org
> * * * to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> * * * (++) from command line, (!!) notice, (II) informational,
> * * * (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 14 22:03:42 2009
> (==) Using config file: "/etc/X11/xorg.conf"
>
> (EE) Failed to load module "type1" (module does not exist, 0)
> (EE) Failed to load module "freetype" (module does not exist, 0)
> (EE) Failed to load module "dri" (module does not exist, 0)
> (EE) Failed to load module "dri2" (module does not exist, 0)
> expected keysym, got XF86TouchpadToggle: line 122 of inet
> expected keysym, got XF86TouchpadToggle: line 122 of inet
> expected keysym, got XF86TouchpadToggle: line 122 of inet
> expected keysym, got XF86TouchpadToggle: line 122 of inet
> /etc/X11/xinit/xinitrc: line 58: twm: command not found
> /etc/X11/xinit/xinitrc: line 59: xclock: command not found
> /etc/X11/xinit/xinitrc: line 60: xterm: command not found
> /etc/X11/xinit/xinitrc: line 61: xterm: command not found
> /etc/X11/xinit/xinitrc: line 62: exec: xterm: not found
>
> waiting for X server to shut down
>
> tux / #
>

Aha! The problem's found, now. The full Xorg.0.conf made me suspect
it, but that output makes me certain. What window manager or desktop
environment do you use? The quick and dirty resolution to your
problem, at least for the current user you're logged in as, is simply:

For Fluxbox (as a simple example that I know works... and only because
of the error you received am I assuming this file doesn't already
exist):
echo exec startfluxbox > ~/.xinitrc

And... many other redundant examples of the same principle.
Alternatively, its looking for twm and friends tells me that it's
trying to run the default from /etc/X11/xinit/xinitrc ... which means
you don't have a preferred session defined. While it *used* to be
defined in /etc/rc.conf is now 'properly' defined in /etc/env.d/, as
is discussed in this thread:

http://www.linux-archive.org/gentoo-user/294751-rc-conf-no-longer-used-gentoo-baselayout-1-12-13-a.html

That, of course, is why Mick asked about your use of /etc/rc.conf
around here somewhere.

Also, as an aside, to have X still "work" in such an instance (while
still not giving you the environment you want), don't build xinit with
the minimal use flag. Without that use flag, it depends on xterm, twm,
etc... which would then not be missing, and in turn would allow X to
start a client rather than closing back to the terminal, where it
looks like an X problem rather than a Session problem.

--
Poison [BLX]
Joshua M. Murphy
 

Thread Tools




All times are GMT. The time now is 11:17 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org