FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Gentoo > Gentoo User

 
 
LinkBack Thread Tools
 
Old 02-01-2009, 02:08 PM
reQuiem23
 
Default Gnome doesn't recognize removable media

Hello all,

I emerged Gnome 2.24 and am now experiencing problems with removable media.
It was not an upgrade, but a new install. Whenever i insert a CD or USB
stick, the system recognizes it (as you can see in the output of tail
/var/log/messages), but nautilus doesn't show a desktop icon or even
auto-mounts the volume. Are there any log files (maybe from udev and
nautilus) or settings i could check to investigate the problem? or is there
anything special about 2.24 that i could have overread?

/var/log/messages:

Feb 1 16:02:49 niklaspc [ 2024.467469] ehci_hcd 0000:00:0b.1: resume root
hub
Feb 1 16:02:49 niklaspc [ 2024.527010] hub 1-0:1.0: hub_resume
Feb 1 16:02:49 niklaspc [ 2024.527022] ehci_hcd 0000:00:0b.1: GetStatus
port 2 status 001803 POWER sig=j CSC CONNECT
Feb 1 16:02:49 niklaspc [ 2024.527026] hub 1-0:1.0: port 2: status 0501
change 0001
Feb 1 16:02:49 niklaspc [ 2024.628020] hub 1-0:1.0: state 7 ports 8 chg
0004 evt 0000
Feb 1 16:02:49 niklaspc [ 2024.628031] hub 1-0:1.0: port 2, status 0501,
change 0000, 480 Mb/s
Feb 1 16:02:49 niklaspc [ 2024.679256] ehci_hcd 0000:00:0b.1: port 2 high
speed
Feb 1 16:02:49 niklaspc [ 2024.679260] ehci_hcd 0000:00:0b.1: GetStatus
port 2 status 001005 POWER sig=se0 PE CONNECT
Feb 1 16:02:49 niklaspc [ 2024.730013] usb 1-2: new high speed USB device
using ehci_hcd and address 7
Feb 1 16:02:49 niklaspc [ 2024.781254] ehci_hcd 0000:00:0b.1: port 2 high
speed
Feb 1 16:02:49 niklaspc [ 2024.781258] ehci_hcd 0000:00:0b.1: GetStatus
port 2 status 001005 POWER sig=se0 PE CONNECT
Feb 1 16:02:49 niklaspc [ 2024.845398] usb 1-2: default language 0x0409
Feb 1 16:02:49 niklaspc [ 2024.846960] usb 1-2: uevent
Feb 1 16:02:49 niklaspc [ 2024.846978] usb 1-2: usb_probe_device
Feb 1 16:02:49 niklaspc [ 2024.846981] usb 1-2: configuration #1 chosen
from 1 choice
Feb 1 16:02:49 niklaspc [ 2024.847203] usb 1-2: adding 1-2:1.0 (config #1,
interface 0)
Feb 1 16:02:49 niklaspc [ 2024.847225] usb 1-2:1.0: uevent
Feb 1 16:02:49 niklaspc [ 2024.847244] usb-storage 1-2:1.0:
usb_probe_interface
Feb 1 16:02:49 niklaspc [ 2024.847249] usb-storage 1-2:1.0:
usb_probe_interface - got id
Feb 1 16:02:49 niklaspc [ 2024.847322] scsi9 : SCSI emulation for USB Mass
Storage devices
Feb 1 16:02:49 niklaspc [ 2024.847409] usb-storage: device found at 7
Feb 1 16:02:49 niklaspc [ 2024.847412] usb-storage: waiting for device to
settle before scanning
Feb 1 16:02:49 niklaspc [ 2024.847505] drivers/usb/core/inode.c: creating
file '007'
Feb 1 16:02:49 niklaspc [ 2024.847555] usb 1-2: New USB device found,
idVendor=1307, idProduct=0165
Feb 1 16:02:49 niklaspc [ 2024.847557] usb 1-2: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Feb 1 16:02:49 niklaspc [ 2024.847560] usb 1-2: Product: USB Mass Storage
Device
Feb 1 16:02:49 niklaspc [ 2024.847563] usb 1-2: Manufacturer: USBest
Technology
Feb 1 16:02:49 niklaspc [ 2024.847565] usb 1-2: SerialNumber:
000000000000E9
Feb 1 16:02:54 niklaspc [ 2029.849398] scsi 9:0:0:0: Direct-Access
UDISK PDU01_4G 8AI2.0 0.00 PQ: 0 ANSI: 2
Feb 1 16:02:54 niklaspc [ 2029.850262] sd 9:0:0:0: [sdc] 7897088 512-byte
hardware sectors: (4.04 GB/3.76 GiB)
Feb 1 16:02:54 niklaspc [ 2029.851573] sd 9:0:0:0: [sdc] Write Protect is
off
Feb 1 16:02:54 niklaspc [ 2029.851576] sd 9:0:0:0: [sdc] Mode Sense: 00 00
00 00
Feb 1 16:02:54 niklaspc [ 2029.851579] sd 9:0:0:0: [sdc] Assuming drive
cache: write through
Feb 1 16:02:54 niklaspc [ 2029.854134] sd 9:0:0:0: [sdc] 7897088 512-byte
hardware sectors: (4.04 GB/3.76 GiB)
Feb 1 16:02:54 niklaspc [ 2029.855504] sd 9:0:0:0: [sdc] Write Protect is
off
Feb 1 16:02:54 niklaspc [ 2029.855507] sd 9:0:0:0: [sdc] Mode Sense: 00 00
00 00
Feb 1 16:02:54 niklaspc [ 2029.855510] sd 9:0:0:0: [sdc] Assuming drive
cache: write through
Feb 1 16:02:54 niklaspc [ 2029.855514] sdc: sdc1
Feb 1 16:02:54 niklaspc [ 2029.959771] sd 9:0:0:0: [sdc] Attached SCSI
removable disk
Feb 1 16:02:54 niklaspc [ 2029.959845] sd 9:0:0:0: Attached scsi generic
sg3 type 0
Feb 1 16:02:54 niklaspc [ 2029.960368] usb-storage: device scan complete


Greetings,
Niklas
--
View this message in context: http://www.nabble.com/Gnome-doesn%27t-recognize-removable-media-tp21776169p21776169.html
Sent from the gentoo-user mailing list archive at Nabble.com.
 
Old 02-01-2009, 03:20 PM
Florian Philipp
 
Default Gnome doesn't recognize removable media

reQuiem23 schrieb:

Hello all,

I emerged Gnome 2.24 and am now experiencing problems with removable media.
It was not an upgrade, but a new install. Whenever i insert a CD or USB
stick, the system recognizes it (as you can see in the output of tail
/var/log/messages), but nautilus doesn't show a desktop icon or even
auto-mounts the volume. Are there any log files (maybe from udev and
nautilus) or settings i could check to investigate the problem? or is there
anything special about 2.24 that i could have overread?



Most likely either hald is not running or some gnome packages were
emerged without the hal useflag.
 

Thread Tools




All times are GMT. The time now is 04:15 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org