Linux Archive
Page 1 of 3 1 23 >
Show 40 post(s) from this thread on one page

Linux Archive (http://www.linux-archive.org/)
-   Gentoo User (http://www.linux-archive.org/gentoo-user/)
-   -   emerge kde-meta troubles (http://www.linux-archive.org/gentoo-user/150112-emerge-kde-meta-troubles.html)

Suman Chakrabarty 08-28-2008 06:40 AM
emerge kde-meta troubles
 
After successful installation of Gentoo 2008 on an old Compaq Pressario
notebook, I was trying to emerge kde-meta on it, but was not successful. :(

My USE flags:

USE="nptl nptlonly -ipv6 -fortran unicode svg hal dbus X opengl
kde qt3 qt4 -arts -eds -esd -gnome -gstreamer -gtk -firefox"


Command used: emerge -D --newuse kde-meta


/var/tmp/portage/kde-base/kscreensaver-3.5.9/work/kscreensaver-3.5.9/config.log
is attached as instructed in the error message.


Last part of the screen output including the error message:

checking for KDE... libraries /usr/kde/3.5/lib, headers /usr/kde/3.5/include
checking if UIC has KDE plugins available... no
configure: error:
you need to install kdelibs first.

If you did install kdelibs, then the Qt version that is picked up by
this configure is not the same version you used to compile kdelibs.
The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the
_same Qt version_, compiled with the _same compiler_ and the same Qt
configuration settings.


!!! Please attach the following file when seeking support:
!!!
/var/tmp/portage/kde-base/kscreensaver-3.5.9/work/kscreensaver-3.5.9/config.log
*
* ERROR: kde-base/kscreensaver-3.5.9 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 4214: Called kde-meta_src_compile
* environment, line 2882: Called kde_src_compile
* environment, line 3047: Called kde_src_compile 'src_compile'
* environment, line 3167: Called kde_src_compile
'src_compile' 'all' 'myconf'
* environment, line 3154: Called econf 'configure' 'make'
'--with-gl' '--without-java' '--with-x' '--enable-mitshm'
'--without-xinerama' '--with-qt-dir=/usr/qt/3' '--enable-mt'
'--with-qt-libraries=/usr/qt/3/lib' '--disable-dependency-tracking'
'--disable-debug' '--without-debug' '--disable-final' '--without-arts'
'--prefix=/usr/kde/3.5' '--mandir=/usr/kde/3.5/share/man'
'--infodir=/usr/kde/3.5/share/info'
* ebuild.sh, line 513: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack
if relevant.
* A complete build log is located at
'/var/tmp/portage/kde-base/kscreensaver-3.5.9/temp/build.log'.
* The ebuild environment file is located at
'/var/tmp/portage/kde-base/kscreensaver-3.5.9/temp/environment'.
*

* Messages for package kde-base/kscreensaver-3.5.9:

*
* ERROR: kde-base/kscreensaver-3.5.9 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 4214: Called kde-meta_src_compile
* environment, line 2882: Called kde_src_compile
* environment, line 3047: Called kde_src_compile 'src_compile'
* environment, line 3167: Called kde_src_compile
'src_compile' 'all' 'myconf'
* environment, line 3154: Called econf 'configure' 'make'
'--with-gl' '--without-java' '--with-x' '--enable-mitshm'
'--without-xinerama' '--with-qt-dir=/usr/qt/3' '--enable-mt'
'--with-qt-libraries=/usr/qt/3/lib' '--disable-dependency-tracking'
'--disable-debug' '--without-debug' '--disable-final' '--without-arts'
'--prefix=/usr/kde/3.5' '--mandir=/usr/kde/3.5/share/man'
'--infodir=/usr/kde/3.5/share/info'
* ebuild.sh, line 513: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack
if relevant.
* A complete build log is located at
'/var/tmp/portage/kde-base/kscreensaver-3.5.9/temp/build.log'.
* The ebuild environment file is located at
'/var/tmp/portage/kde-base/kscreensaver-3.5.9/temp/environment'.


Please help.


Thanks,
Suman Chakrabarty.

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by configure, which was
generated by GNU Autoconf 2.61. Invocation command line was

$ ./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --with-gl --without-java --with-x --enable-mitshm --without-xinerama --with-qt-dir=/usr/qt/3 --enable-mt --with-qt-libraries=/usr/qt/3/lib --disable-dependency-tracking --disable-debug --without-debug --disable-final --without-arts --prefix=/usr/kde/3.5 --mandir=/usr/kde/3.5/share/man --infodir=/usr/kde/3.5/share/info --datadir=/usr/kde/3.5/share --sysconfdir=/usr/kde/3.5/etc --build=i686-pc-linux-gnu

## --------- ##
## Platform. ##
## --------- ##

hostname = relaxation
uname -m = i686
uname -r = 2.6.25-gentoo-r7
uname -s = Linux
uname -v = #1 SMP Sat Aug 23 20:09:23 IST 2008

/usr/bin/uname -p = Intel(R) Pentium(R) III Mobile CPU 1133MHz
/bin/uname -X = unknown

/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown

PATH: /usr/kde/3.5/bin
PATH: /usr/lib/ccache/bin
PATH: /usr/local/sbin
PATH: /sbin
PATH: /usr/sbin
PATH: /usr/lib/portage/bin
PATH: /usr/local/bin
PATH: /bin
PATH: /usr/bin
PATH: /opt/bin
PATH: /usr/i486-pc-linux-gnu/gcc-bin/4.1.2
PATH: /usr/i686-pc-linux-gnu/gcc-bin/4.1.2
PATH: /usr/kde/3.5/sbin
PATH: /usr/kde/3.5/bin
PATH: /usr/qt/3/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2189: checking build system type
configure:2207: result: i686-pc-linux-gnu
configure:2229: checking host system type
configure:2244: result: i686-pc-linux-gnu
configure:2266: checking target system type
configure:2281: result: i686-pc-linux-gnu
configure:2342: checking for a BSD-compatible install
configure:2398: result: /usr/bin/install -c
configure:2413: checking for -p flag to install
configure:2426: result: yes
configure:2437: checking whether build environment is sane
configure:2480: result: yes
configure:2532: checking for gawk
configure:2548: found /bin/gawk
configure:2559: result: gawk
configure:2570: checking whether make sets $(MAKE)
configure:2591: result: yes
configure:2865: checking for kde-config
configure:2927: result: /usr/kde/3.5/bin/kde-config
configure:2950: checking where to install
configure:2958: result: /usr/kde/3.5 (as requested)
configure:3009: checking for style of include used by make
configure:3037: result: GNU
configure:3147: checking for i686-pc-linux-gnu-gcc
configure:3163: found /usr/lib/ccache/bin/i686-pc-linux-gnu-gcc
configure:3174: result: i686-pc-linux-gnu-gcc
configure:3452: checking for C compiler version
configure:3459: i686-pc-linux-gnu-gcc --version >&5
i686-pc-linux-gnu-gcc (GCC) 4.1.2 (Gentoo 4.1.2 p1.1)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:3462: $? = 0
configure:3469: i686-pc-linux-gnu-gcc -v >&5
Using built-in specs.
Target: i686-pc-linux-gnu
Configured with: /var/tmp/portage/sys-devel/gcc-4.1.2/work/gcc-4.1.2/configure --prefix=/usr --bindir=/usr/i686-pc-linux-gnu/gcc-bin/4.1.2 --includedir=/usr/lib/gcc/i686-pc-linux-gnu/4.1.2/include --datadir=/usr/share/gcc-data/i686-pc-linux-gnu/4.1.2 --mandir=/usr/share/gcc-data/i686-pc-linux-gnu/4.1.2/man --infodir=/usr/share/gcc-data/i686-pc-linux-gnu/4.1.2/info --with-gxx-include-dir=/usr/lib/gcc/i686-pc-linux-gnu/4.1.2/include/g++-v4 --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --disable-multilib --enable-libmudflap --disable-libssp --disable-libgcj --with-arch=i686 --enable-languages=c,c++,treelang --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu
Thread model: posix
gcc version 4.1.2 (Gentoo 4.1.2 p1.1)
configure:3472: $? = 0
configure:3479: i686-pc-linux-gnu-gcc -V >&5
i686-pc-linux-gnu-gcc: '-V' option must have argument
configure:3482: $? = 1
configure:3505: checking for C compiler default output file name
configure:3532: i686-pc-linux-gnu-gcc -O2 -march=i686 -pipe -Wl,-O1 conftest.c >&5
configure:3535: $? = 0
configure:3573: result: a.out
configure:3590: checking whether the C compiler works
configure:3600: ./a.out
configure:3603: $? = 0
configure:3620: result: yes
configure:3627: checking whether we are cross compiling
configure:3629: result: no
configure:3632: checking for suffix of executables
configure:3639: i686-pc-linux-gnu-gcc -o conftest -O2 -march=i686 -pipe -Wl,-O1 conftest.c >&5
configure:3642: $? = 0
configure:3666: result:
configure:3672: checking for suffix of object files
configure:3698: i686-pc-linux-gnu-gcc -c -O2 -march=i686 -pipe conftest.c >&5
configure:3701: $? = 0
configure:3724: result: o
configure:3728: checking whether we are using the GNU C compiler
configure:3757: i686-pc-linux-gnu-gcc -c -O2 -march=i686 -pipe conftest.c >&5
configure:3763: $? = 0
configure:3780: result: yes
configure:3785: checking whether i686-pc-linux-gnu-gcc accepts -g
configure:3815: i686-pc-linux-gnu-gcc -c -g conftest.c >&5
configure:3821: $? = 0
configure:3920: result: yes
configure:3937: checking for i686-pc-linux-gnu-gcc option to accept ISO C89
configure:4011: i686-pc-linux-gnu-gcc -c -O2 -march=i686 -pipe conftest.c >&5
configure:4017: $? = 0
configure:4040: result: none needed
configure:4060: checking dependency style of i686-pc-linux-gnu-gcc
configure:4150: result: none
configure:4173: checking how to run the C preprocessor
configure:4213: i686-pc-linux-gnu-gcc -E conftest.c
configure:4219: $? = 0
configure:4250: i686-pc-linux-gnu-gcc -E conftest.c
conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
configure:4256: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:4289: result: i686-pc-linux-gnu-gcc -E
configure:4318: i686-pc-linux-gnu-gcc -E conftest.c
configure:4324: $? = 0
configure:4355: i686-pc-linux-gnu-gcc -E conftest.c
conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
configure:4361: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:4441: checking for i686-pc-linux-gnu-g++
configure:4457: found /usr/lib/ccache/bin/i686-pc-linux-gnu-g++
configure:4468: result: i686-pc-linux-gnu-g++
configure:4543: checking for C++ compiler version
configure:4550: i686-pc-linux-gnu-g++ --version >&5
i686-pc-linux-gnu-g++ (GCC) 4.1.2 (Gentoo 4.1.2 p1.1)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:4553: $? = 0
configure:4560: i686-pc-linux-gnu-g++ -v >&5
Using built-in specs.
Target: i686-pc-linux-gnu
Configured with: /var/tmp/portage/sys-devel/gcc-4.1.2/work/gcc-4.1.2/configure --prefix=/usr --bindir=/usr/i686-pc-linux-gnu/gcc-bin/4.1.2 --includedir=/usr/lib/gcc/i686-pc-linux-gnu/4.1.2/include --datadir=/usr/share/gcc-data/i686-pc-linux-gnu/4.1.2 --mandir=/usr/share/gcc-data/i686-pc-linux-gnu/4.1.2/man --infodir=/usr/share/gcc-data/i686-pc-linux-gnu/4.1.2/info --with-gxx-include-dir=/usr/lib/gcc/i686-pc-linux-gnu/4.1.2/include/g++-v4 --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --disable-multilib --enable-libmudflap --disable-libssp --disable-libgcj --with-arch=i686 --enable-languages=c,c++,treelang --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu
Thread model: posix
gcc version 4.1.2 (Gentoo 4.1.2 p1.1)
configure:4563: $? = 0
configure:4570: i686-pc-linux-gnu-g++ -V >&5
i686-pc-linux-gnu-g++: '-V' option must have argument
configure:4573: $? = 1
configure:4576: checking whether we are using the GNU C++ compiler
configure:4605: i686-pc-linux-gnu-g++ -c -O2 -march=i686 -pipe conftest.cpp >&5
configure:4611: $? = 0
configure:4628: result: yes
configure:4633: checking whether i686-pc-linux-gnu-g++ accepts -g
configure:4663: i686-pc-linux-gnu-g++ -c -g conftest.cpp >&5
configure:4669: $? = 0
configure:4768: result: yes
configure:4793: checking dependency style of i686-pc-linux-gnu-g++
configure:4883: result: none
configure:4902: checking whether i686-pc-linux-gnu-gcc is blacklisted
configure:4933: i686-pc-linux-gnu-gcc -c -DNDEBUG -O2 -O2 -march=i686 -pipe conftest.c >&5
configure:4939: $? = 0
configure:4955: result: no
configure:5283: checking whether i686-pc-linux-gnu-g++ supports -Wmissing-format-attribute
configure:5323: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wmissing-format-attribute -Wl,-O1 conftest.cpp 1>&5
configure:5329: $? = 0
configure:5356: result: yes
configure:5368: checking whether i686-pc-linux-gnu-gcc supports -Wmissing-format-attribute
configure:5405: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wmissing-format-attribute -Wl,-O1 conftest.c >&5
configure:5411: $? = 0
configure:5438: result: yes
configure:5452: checking whether i686-pc-linux-gnu-g++ supports -Wundef
configure:5492: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wundef -Wl,-O1 conftest.cpp 1>&5
configure:5498: $? = 0
configure:5525: result: yes
configure:5537: checking whether i686-pc-linux-gnu-g++ supports -Wno-long-long
configure:5577: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-long-long -Wl,-O1 conftest.cpp 1>&5
configure:5583: $? = 0
configure:5610: result: yes
configure:5622: checking whether i686-pc-linux-gnu-g++ supports -Wno-non-virtual-dtor
configure:5662: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -Wl,-O1 conftest.cpp 1>&5
configure:5668: $? = 0
configure:5695: result: yes
configure:5727: checking whether i686-pc-linux-gnu-g++ supports -fno-reorder-blocks
configure:5767: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-reorder-blocks -Wl,-O1 conftest.cpp 1>&5
configure:5773: $? = 0
configure:5800: result: yes
configure:5818: checking whether i686-pc-linux-gnu-g++ supports -fno-exceptions
configure:5858: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -Wl,-O1 conftest.cpp 1>&5
configure:5864: $? = 0
configure:5891: result: yes
configure:5903: checking whether i686-pc-linux-gnu-g++ supports -fno-check-new
configure:5943: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -Wl,-O1 conftest.cpp 1>&5
configure:5949: $? = 0
configure:5976: result: yes
configure:5988: checking whether i686-pc-linux-gnu-g++ supports -fno-common
configure:6028: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -Wl,-O1 conftest.cpp 1>&5
configure:6034: $? = 0
configure:6061: result: yes
configure:6073: checking whether i686-pc-linux-gnu-g++ supports -fexceptions
configure:6113: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -fexceptions -Wl,-O1 conftest.cpp 1>&5
configure:6119: $? = 0
configure:6146: result: yes
configure:6189: checking whether system headers can cope with -O2 -fno-inline
configure:6255: result: irrelevant
configure:6893: checking how to run the C++ preprocessor
configure:6929: i686-pc-linux-gnu-g++ -E conftest.cpp
configure:6935: $? = 0
configure:6966: i686-pc-linux-gnu-g++ -E conftest.cpp
conftest.cpp:10:28: error: ac_nonexistent.h: No such file or directory
configure:6972: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7005: result: i686-pc-linux-gnu-g++ -E
configure:7034: i686-pc-linux-gnu-g++ -E conftest.cpp
configure:7040: $? = 0
configure:7071: i686-pc-linux-gnu-g++ -E conftest.cpp
conftest.cpp:10:28: error: ac_nonexistent.h: No such file or directory
configure:7077: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7119: checking whether i686-pc-linux-gnu-g++ supports -O0
configure:7159: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -O0 -Wl,-O1 conftest.cpp 1>&5
configure:7165: $? = 0
configure:7192: result: yes
configure:7457: checking whether i686-pc-linux-gnu-g++ supports -Wl,--no-undefined
configure:7497: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -Wl,--no-undefined -Wl,-O1 conftest.cpp 1>&5
configure:7503: $? = 0
configure:7530: result: yes
configure:7534: checking whether i686-pc-linux-gnu-g++ supports -Wl,--allow-shlib-undefined
configure:7574: rm -rf SunWS_cache; i686-pc-linux-gnu-g++ -o conftest -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -Wl,--allow-shlib-undefined -Wl,-O1 conftest.cpp 1>&5
configure:7580: $? = 0
configure:7607: result: yes
configure:7732: result: not using lib directory suffix
configure:7777: checking for a sed that does not truncate output
configure:7831: result: /bin/sed
configure:7834: checking for grep that handles long lines and -e
configure:7908: result: /bin/grep
configure:7913: checking for egrep
configure:7991: result: /bin/grep -E
configure:8007: checking for ld used by i686-pc-linux-gnu-gcc
configure:8074: result: /usr/i686-pc-linux-gnu/bin/ld
configure:8083: checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld
configure:8098: result: yes
configure:8103: checking for /usr/i686-pc-linux-gnu/bin/ld option to reload object files
configure:8110: result: -r
configure:8119: checking for BSD-compatible nm
configure:8161: result: /usr/bin/i686-pc-linux-gnu-nm -B
configure:8165: checking whether ln -s works
configure:8169: result: yes
configure:8176: checking how to recognise dependent libraries
configure:8383: result: pass_all
configure:8589: checking for ANSI C header files
configure:8619: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8625: $? = 0
configure:8724: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c >&5
configure:8727: $? = 0
configure:8733: ./conftest
configure:8736: $? = 0
configure:8753: result: yes
configure:8777: checking for sys/types.h
configure:8798: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8804: $? = 0
configure:8820: result: yes
configure:8777: checking for sys/stat.h
configure:8798: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8804: $? = 0
configure:8820: result: yes
configure:8777: checking for stdlib.h
configure:8798: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8804: $? = 0
configure:8820: result: yes
configure:8777: checking for string.h
configure:8798: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8804: $? = 0
configure:8820: result: yes
configure:8777: checking for memory.h
configure:8798: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8804: $? = 0
configure:8820: result: yes
configure:8777: checking for strings.h
configure:8798: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8804: $? = 0
configure:8820: result: yes
configure:8777: checking for inttypes.h
configure:8798: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8804: $? = 0
configure:8820: result: yes
configure:8777: checking for stdint.h
configure:8798: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8804: $? = 0
configure:8820: result: yes
configure:8777: checking for unistd.h
configure:8798: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8804: $? = 0
configure:8820: result: yes
configure:8847: checking dlfcn.h usability
configure:8864: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:8870: $? = 0
configure:8884: result: yes
configure:8888: checking dlfcn.h presence
configure:8903: i686-pc-linux-gnu-gcc -E conftest.c
configure:8909: $? = 0
configure:8923: result: yes
configure:8951: checking for dlfcn.h
configure:8959: result: yes
configure:8981: checking for i686-pc-linux-gnu-g77
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-xlf
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-f77
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-frt
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-pgf77
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-cf77
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-fort77
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-fl32
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-af77
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-xlf90
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-f90
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-pgf90
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-pghpf
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-epcf90
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-gfortran
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-g95
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-xlf95
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-f95
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-fort
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-ifort
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-ifc
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-efc
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-pgf95
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-lf95
configure:9011: result: no
configure:8981: checking for i686-pc-linux-gnu-ftn
configure:9011: result: no
configure:9025: checking for g77
configure:9055: result: no
configure:9025: checking for xlf
configure:9055: result: no
configure:9025: checking for f77
configure:9055: result: no
configure:9025: checking for frt
configure:9055: result: no
configure:9025: checking for pgf77
configure:9055: result: no
configure:9025: checking for cf77
configure:9055: result: no
configure:9025: checking for fort77
configure:9055: result: no
configure:9025: checking for fl32
configure:9055: result: no
configure:9025: checking for af77
configure:9055: result: no
configure:9025: checking for xlf90
configure:9055: result: no
configure:9025: checking for f90
configure:9055: result: no
configure:9025: checking for pgf90
configure:9055: result: no
configure:9025: checking for pghpf
configure:9055: result: no
configure:9025: checking for epcf90
configure:9055: result: no
configure:9025: checking for gfortran
configure:9055: result: no
configure:9025: checking for g95
configure:9055: result: no
configure:9025: checking for xlf95
configure:9055: result: no
configure:9025: checking for f95
configure:9055: result: no
configure:9025: checking for fort
configure:9055: result: no
configure:9025: checking for ifort
configure:9055: result: no
configure:9025: checking for ifc
configure:9055: result: no
configure:9025: checking for efc
configure:9055: result: no
configure:9025: checking for pgf95
configure:9055: result: no
configure:9025: checking for lf95
configure:9055: result: no
configure:9025: checking for ftn
configure:9055: result: no
configure:9082: checking for Fortran 77 compiler version
configure:9089: --version >&5
./configure: line 9090: --version: command not found
configure:9092: $? = 127
configure:9099: -v >&5
./configure: line 9100: -v: command not found
configure:9102: $? = 127
configure:9109: -V >&5
./configure: line 9110: -V: command not found
configure:9112: $? = 127
configure:9120: checking whether we are using the GNU Fortran 77 compiler
configure:9139: -c conftest.F >&5
./configure: line 9140: -c: command not found
configure:9145: $? = 127
configure: failed program was:
| program main
| #ifndef __GNUC__
| choke me
| #endif
|
| end
configure:9162: result: no
configure:9168: checking whether accepts -g
configure:9185: -c -g conftest.f >&5
./configure: line 9186: -c: command not found
configure:9191: $? = 127
configure: failed program was:
| program main
|
| end
configure:9207: result: no
configure:9237: checking the maximum length of command line arguments
configure:9296: result: 32768
configure:9307: checking command to parse /usr/bin/i686-pc-linux-gnu-nm -B output from i686-pc-linux-gnu-gcc object
configure:9396: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
conftest.c:5: warning: no previous prototype for 'nm_test_func'
configure:9399: $? = 0
configure:9403: /usr/bin/i686-pc-linux-gnu-nm -B conftest.o | sed -n -e 's/^.*[ ]([ABCDGISTW][ABCDGISTW]*)[ ][ ]*()([_A-Za-z][_A-Za-z0-9]*)$/1 23 3/p' > conftest.nm
configure:9406: $? = 0
configure:9458: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c conftstm.o >&5
configure:9461: $? = 0
configure:9499: result: ok
configure:9503: checking for objdir
configure:9518: result: .libs
configure:9570: checking for i686-pc-linux-gnu-ar
configure:9586: found /usr/bin/i686-pc-linux-gnu-ar
configure:9597: result: i686-pc-linux-gnu-ar
configure:9666: checking for i686-pc-linux-gnu-ranlib
configure:9682: found /usr/bin/i686-pc-linux-gnu-ranlib
configure:9693: result: i686-pc-linux-gnu-ranlib
configure:9762: checking for i686-pc-linux-gnu-strip
configure:9778: found /usr/bin/i686-pc-linux-gnu-strip
configure:9789: result: i686-pc-linux-gnu-strip
configure:10105: checking if i686-pc-linux-gnu-gcc static flag works
configure:10128: result: yes
configure:10150: checking if i686-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions
configure:10168: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
configure:10172: $? = 0
configure:10183: result: no
configure:10198: checking for i686-pc-linux-gnu-gcc option to produce PIC
configure:10375: result: -fPIC
configure:10383: checking if i686-pc-linux-gnu-gcc PIC flag -fPIC works
configure:10401: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -fPIC -DPIC conftest.c >&5
configure:10405: $? = 0
configure:10416: result: yes
configure:10440: checking if i686-pc-linux-gnu-gcc supports -c -o file.o
configure:10468: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -o out/conftest2.o conftest.c >&5
configure:10472: $? = 0
configure:10489: result: yes
configure:10515: checking whether the i686-pc-linux-gnu-gcc linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries
configure:11323: result: yes
configure:11349: checking whether -lc should be explicitly linked in
configure:11354: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:11357: $? = 0
configure:11371: i686-pc-linux-gnu-gcc -shared -v conftest.o -Wl,-soname -Wl,conftest -o conftest 2>&1 | grep -lc >/dev/null 2>&1
configure:11374: $? = 0
configure:11386: result: no
configure:11394: checking dynamic linker characteristics
configure:11912: result: GNU/Linux ld.so
configure:11916: checking how to hardcode library paths into programs
configure:11941: result: immediate
configure:11955: checking whether stripping libraries is possible
configure:11960: result: yes
configure:12083: checking for shl_load
configure:12139: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c >&5
/var/tmp/portage/kde-base/kscreensaver-3.5.9/temp/ccKBzI5d.o: In function `main':
conftest.c:(.text+0x12): undefined reference to `shl_load'
collect2: ld returned 1 exit status
configure:12145: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| /* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
| For example, HP-UX 11i <limits.h> declares gettimeofday. */
| #define shl_load innocuous_shl_load
|
| /* System header to define __stub macros and hopefully few prototypes,
| which can conflict with char shl_load (); below.
| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| <limits.h> exists even on freestanding compilers. */
|
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
|
| #undef shl_load
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char shl_load ();
| /* The GNU C library defines this for functions which it implements
| to always fail with ENOSYS. Some functions are actually named
| something starting with __ and the normal name is an alias. */
| #if defined __stub_shl_load || defined __stub___shl_load
| choke me
| #endif
|
| int
| main ()
| {
| return shl_load ();
| ;
| return 0;
| }
configure:12162: result: no
configure:12167: checking for shl_load in -ldld
configure:12202: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c -ldld >&5
/usr/lib/gcc/i686-pc-linux-gnu/4.1.2/../../../../i686-pc-linux-gnu/bin/ld: cannot find -ldld
collect2: ld returned 1 exit status
configure:12208: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char shl_load ();
| int
| main ()
| {
| return shl_load ();
| ;
| return 0;
| }
configure:12226: result: no
configure:12231: checking for dlopen
configure:12287: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c >&5
/var/tmp/portage/kde-base/kscreensaver-3.5.9/temp/ccWC9NKx.o: In function `main':
conftest.c:(.text+0x12): undefined reference to `dlopen'
collect2: ld returned 1 exit status
configure:12293: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| /* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
| For example, HP-UX 11i <limits.h> declares gettimeofday. */
| #define dlopen innocuous_dlopen
|
| /* System header to define __stub macros and hopefully few prototypes,
| which can conflict with char dlopen (); below.
| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| <limits.h> exists even on freestanding compilers. */
|
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
|
| #undef dlopen
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char dlopen ();
| /* The GNU C library defines this for functions which it implements
| to always fail with ENOSYS. Some functions are actually named
| something starting with __ and the normal name is an alias. */
| #if defined __stub_dlopen || defined __stub___dlopen
| choke me
| #endif
|
| int
| main ()
| {
| return dlopen ();
| ;
| return 0;
| }
configure:12310: result: no
configure:12315: checking for dlopen in -ldl
configure:12350: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c -ldl >&5
configure:12356: $? = 0
configure:12374: result: yes
configure:12543: checking whether a program can dlopen itself
configure:12615: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -DHAVE_DLFCN_H -Wl,-O1 -Wl,--export-dynamic conftest.c -ldl >&5
configure:12598: warning: no previous prototype for 'fnord'
configure: In function 'fnord':
configure:12598: warning: unused variable 'i'
configure: In function 'main':
configure:12611: warning: implicit declaration of function 'exit'
configure:12611: warning: incompatible implicit declaration of built-in function 'exit'
configure:12618: $? = 0
configure:12636: result: yes
configure:12641: checking whether a statically linked program can dlopen itself
configure:12713: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -DHAVE_DLFCN_H -Wl,-O1 -Wl,--export-dynamic conftest.c -ldl >&5
configure:12696: warning: no previous prototype for 'fnord'
configure: In function 'fnord':
configure:12696: warning: unused variable 'i'
configure: In function 'main':
configure:12709: warning: implicit declaration of function 'exit'
configure:12709: warning: incompatible implicit declaration of built-in function 'exit'
configure:12716: $? = 0
configure:12734: result: yes
configure:12757: checking if libtool supports shared libraries
configure:12759: result: yes
configure:12762: checking whether to build shared libraries
configure:12820: result: yes
configure:12823: checking whether to build static libraries
configure:12827: result: no
configure:12918: creating libtool
configure:13462: checking for ld used by i686-pc-linux-gnu-g++
configure:13529: result: /usr/i686-pc-linux-gnu/bin/ld
configure:13538: checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld
configure:13553: result: yes
configure:13604: checking whether the i686-pc-linux-gnu-g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries
configure:14414: result: yes
configure:14436: i686-pc-linux-gnu-g++ -c -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common conftest.cc >&5
configure:14439: $? = 0
configure:14535: checking for i686-pc-linux-gnu-g++ option to produce PIC
configure:14787: result: -fPIC
configure:14795: checking if i686-pc-linux-gnu-g++ PIC flag -fPIC works
configure:14813: i686-pc-linux-gnu-g++ -c -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -fPIC -DPIC conftest.cc >&5
configure:14817: $? = 0
configure:14828: result: yes
configure:14852: checking if i686-pc-linux-gnu-g++ supports -c -o file.o
configure:14880: i686-pc-linux-gnu-g++ -c -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -o out/conftest2.o conftest.cc >&5
configure:14884: $? = 0
configure:14901: result: yes
configure:14927: checking whether the i686-pc-linux-gnu-g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries
configure:14952: result: yes
configure:15023: checking dynamic linker characteristics
configure:15541: result: GNU/Linux ld.so
configure:15545: checking how to hardcode library paths into programs
configure:15570: result: immediate
configure:15584: checking whether stripping libraries is possible
configure:15589: result: yes
configure:15712: checking for shl_load
configure:15791: result: no
configure:15796: checking for shl_load in -ldld
configure:15855: result: no
configure:15860: checking for dlopen
configure:15939: result: no
configure:15944: checking for dlopen in -ldl
configure:16003: result: yes
configure:16172: checking whether a program can dlopen itself
configure:16265: result: yes
configure:16270: checking whether a statically linked program can dlopen itself
configure:16363: result: yes
configure:22660: checking for msgfmt
configure:22687: result: /usr/bin/msgfmt
configure:22696: checking for gmsgfmt
configure:22714: found /usr/bin/gmsgfmt
configure:22727: result: /usr/bin/gmsgfmt
configure:22747: checking for xgettext
configure:22774: result: /usr/bin/xgettext
configure:22809: checking if C++ programs can be compiled
configure:22843: i686-pc-linux-gnu-g++ -c -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-check-new -fno-common conftest.cpp >&5
configure:22849: $? = 0
configure:22867: result: yes
configure:22897: checking for strlcat
configure:22949: i686-pc-linux-gnu-g++ -c -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -pedantic-errors conftest.cpp >&5
conftest.cpp: In function 'int main()':
conftest.cpp:34: error: 'strlcat' was not declared in this scope
configure:22955: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_SGI_STL 1
| /* end confdefs.h. */
|
|
| #include <string.h>
|
|
| int
| main ()
| {
|
| char buf[20];
| buf[0]='';
| strlcat(buf, "KDE function test", sizeof(buf));
|
|
| ;
| return 0;
| }
configure:22981: result: no
configure:22984: checking if strlcat needs custom prototype
configure:23084: result: yes - in libkdefakes
configure:23109: checking for strlcpy
configure:23160: i686-pc-linux-gnu-g++ -c -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -pedantic-errors conftest.cpp >&5
conftest.cpp: In function 'int main()':
conftest.cpp:33: error: 'strlcpy' was not declared in this scope
configure:23166: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_SGI_STL 1
| /* end confdefs.h. */
|
|
| #include <string.h>
|
|
| int
| main ()
| {
|
| char buf[20];
| strlcpy(buf, "KDE function test", sizeof(buf));
|
|
| ;
| return 0;
| }
configure:23192: result: no
configure:23195: checking if strlcpy needs custom prototype
configure:23294: result: yes - in libkdefakes
configure:23318: checking for main in -lutil
configure:23347: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c -lutil >&5
configure:23353: $? = 0
configure:23371: result: yes
configure:23377: checking for main in -lcompat
configure:23406: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c -lcompat >&5
/usr/lib/gcc/i686-pc-linux-gnu/4.1.2/../../../../i686-pc-linux-gnu/bin/ld: cannot find -lcompat
collect2: ld returned 1 exit status
configure:23412: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_SGI_STL 1
| /* end confdefs.h. */
|
|
| int
| main ()
| {
| return main ();
| ;
| return 0;
| }
configure:23430: result: no
configure:23437: checking for crypt in -lcrypt
configure:23472: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c -lcrypt >&5
configure:23478: $? = 0
configure:23496: result: yes
configure:23587: checking for socklen_t
configure:23627: i686-pc-linux-gnu-g++ -c -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common conftest.cpp >&5
configure:23633: $? = 0
configure:23659: result: yes
configure:23750: checking for dnet_ntoa in -ldnet
configure:23785: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c -ldnet >&5
/usr/lib/gcc/i686-pc-linux-gnu/4.1.2/../../../../i686-pc-linux-gnu/bin/ld: cannot find -ldnet
collect2: ld returned 1 exit status
configure:23791: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_SGI_STL 1
| #define HAVE_CRYPT 1
| #define kde_socklen_t socklen_t
| #define ksize_t socklen_t
| /* end confdefs.h. */
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char dnet_ntoa ();
| int
| main ()
| {
| return dnet_ntoa ();
| ;
| return 0;
| }
configure:23809: result: no
configure:23816: checking for dnet_ntoa in -ldnet_stub
configure:23851: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c -ldnet_stub >&5
/usr/lib/gcc/i686-pc-linux-gnu/4.1.2/../../../../i686-pc-linux-gnu/bin/ld: cannot find -ldnet_stub
collect2: ld returned 1 exit status
configure:23857: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_SGI_STL 1
| #define HAVE_CRYPT 1
| #define kde_socklen_t socklen_t
| #define ksize_t socklen_t
| /* end confdefs.h. */
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char dnet_ntoa ();
| int
| main ()
| {
| return dnet_ntoa ();
| ;
| return 0;
| }
configure:23875: result: no
configure:23882: checking for inet_ntoa
configure:23938: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c >&5
configure:23944: $? = 0
configure:23961: result: yes
configure:24031: checking for connect
configure:24087: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c >&5
configure:24093: $? = 0
configure:24110: result: yes
configure:24181: checking for remove
configure:24237: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c >&5
configure:24243: $? = 0
configure:24260: result: yes
configure:24332: checking for shmat
configure:24388: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c >&5
configure:24394: $? = 0
configure:24411: result: yes
configure:24491: checking for sys/types.h
configure:24497: result: yes
configure:24491: checking for stdint.h
configure:24497: result: yes
configure:24643: checking sys/bitypes.h usability
configure:24660: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
configure:24666: $? = 0
configure:24680: result: yes
configure:24684: checking sys/bitypes.h presence
configure:24699: i686-pc-linux-gnu-gcc -E conftest.c
configure:24705: $? = 0
configure:24719: result: yes
configure:24747: checking for sys/bitypes.h
configure:24755: result: yes
configure:24770: checking for poll in -lpoll
configure:24805: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute -Wl,-O1 conftest.c -lpoll >&5
/usr/lib/gcc/i686-pc-linux-gnu/4.1.2/../../../../i686-pc-linux-gnu/bin/ld: cannot find -lpoll
collect2: ld returned 1 exit status
configure:24811: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_SGI_STL 1
| #define HAVE_CRYPT 1
| #define kde_socklen_t socklen_t
| #define ksize_t socklen_t
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_SYS_BITYPES_H 1
| /* end confdefs.h. */
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char poll ();
| int
| main ()
| {
| return poll ();
| ;
| return 0;
| }
configure:24829: result: no
configure:24852: checking Carbon/Carbon.h usability
configure:24869: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
conftest.c:62:27: error: Carbon/Carbon.h: No such file or directory
configure:24875: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_SGI_STL 1
| #define HAVE_CRYPT 1
| #define kde_socklen_t socklen_t
| #define ksize_t socklen_t
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_SYS_BITYPES_H 1
| /* end confdefs.h. */
| #include <stdio.h>
| #ifdef HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #ifdef STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # ifdef HAVE_STDLIB_H
| # include <stdlib.h>
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include <memory.h>
| # endif
| # include <string.h>
| #endif
| #ifdef HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #ifdef HAVE_INTTYPES_H
| # include <inttypes.h>
| #endif
| #ifdef HAVE_STDINT_H
| # include <stdint.h>
| #endif
| #ifdef HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| #include <Carbon/Carbon.h>
configure:24889: result: no
configure:24893: checking Carbon/Carbon.h presence
configure:24908: i686-pc-linux-gnu-gcc -E conftest.c
conftest.c:29:27: error: Carbon/Carbon.h: No such file or directory
configure:24914: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_SGI_STL 1
| #define HAVE_CRYPT 1
| #define kde_socklen_t socklen_t
| #define ksize_t socklen_t
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_SYS_BITYPES_H 1
| /* end confdefs.h. */
| #include <Carbon/Carbon.h>
configure:24928: result: no
configure:24956: checking for Carbon/Carbon.h
configure:24964: result: no
configure:24989: checking CoreAudio/CoreAudio.h usability
configure:25006: i686-pc-linux-gnu-gcc -c -std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DNDEBUG -O2 -O2 -march=i686 -pipe -Wformat-security -Wmissing-format-attribute conftest.c >&5
conftest.c:62:33: error: CoreAudio/CoreAudio.h: No such file or directory
configure:25012: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_SGI_STL 1
| #define HAVE_CRYPT 1
| #define kde_socklen_t socklen_t
| #define ksize_t socklen_t
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_SYS_BITYPES_H 1
| /* end confdefs.h. */
| #include <stdio.h>
| #ifdef HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #ifdef STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # ifdef HAVE_STDLIB_H
| # include <stdlib.h>
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include <memory.h>
| # endif
| # include <string.h>
| #endif
| #ifdef HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #ifdef HAVE_INTTYPES_H
| # include <inttypes.h>
| #endif
| #ifdef HAVE_STDINT_H
| # include <stdint.h>
| #endif
| #ifdef HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| #include <CoreAudio/CoreAudio.h>
configure:25026: result: no
configure:25030: checking CoreAudio/CoreAudio.h presence
configure:25045: i686-pc-linux-gnu-gcc -E conftest.c
conftest.c:29:33: error: CoreAudio/CoreAudio.h: No such file or directory
configure:25051: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "kscreensaver"
| #define VERSION "3.5.9"
| #define KDELIBSUFF ""
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_SGI_STL 1
| #define HAVE_CRYPT 1
| #define kde_socklen_t socklen_t
| #define ksize_t socklen_t
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_SYS_BITYPES_H 1
| /* end confdefs.h. */
| #include <CoreAudio/CoreAudio.h>
configure:25065: result: no
configure:25093: checking for CoreAudio/CoreAudio.h
configure:25100: result: no
configure:25118: checking if res_init needs -lresolv
configure:25150: i686-pc-linux-gnu-gcc -o conftest -std=iso9899:1990 -W -Wall

Xav' 08-28-2008 06:42 AM
emerge kde-meta troubles
 
Le Thursday 28 August 2008 08:40:39 Suman Chakrabarty, vous avez écrit*:
> After successful installation of Gentoo 2008 on an old Compaq Pressario
> notebook, I was trying to emerge kde-meta on it, but was not successful. :(
>
> My USE flags:
>
> USE="nptl nptlonly -ipv6 -fortran unicode svg hal dbus X opengl
> kde qt3 qt4 -arts -eds -esd -gnome -gstreamer -gtk -firefox"
>
>
> Command used: emerge -D --newuse kde-meta
>
>
> /var/tmp/portage/kde-base/kscreensaver-3.5.9/work/kscreensaver-3.5.9/config
>.log is attached as instructed in the error message.
>
>
> Last part of the screen output including the error message:
>
> checking for KDE... libraries /usr/kde/3.5/lib, headers
> /usr/kde/3.5/include checking if UIC has KDE plugins available... no
> configure: error:
> you need to install kdelibs first.
>
> If you did install kdelibs, then the Qt version that is picked up by
> this configure is not the same version you used to compile kdelibs.
> The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the
> _same Qt version_, compiled with the _same compiler_ and the same Qt
> configuration settings.

As he said, you have to reemerge kdelibs first because your Qt version has
changed since the last installation of kdelibs. You can also retry with
adding --update to your emerge command. Posting your emerge --info output can
help us too ;)

>
> !!! Please attach the following file when seeking support:
> !!!
> /var/tmp/portage/kde-base/kscreensaver-3.5.9/work/kscreensaver-3.5.9/config
>.log *
> * ERROR: kde-base/kscreensaver-3.5.9 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_compile
> * environment, line 4214: Called kde-meta_src_compile
> * environment, line 2882: Called kde_src_compile
> * environment, line 3047: Called kde_src_compile
> 'src_compile' * environment, line 3167: Called kde_src_compile
> 'src_compile' 'all' 'myconf'
> * environment, line 3154: Called econf 'configure' 'make'
> '--with-gl' '--without-java' '--with-x' '--enable-mitshm'
> '--without-xinerama' '--with-qt-dir=/usr/qt/3' '--enable-mt'
> '--with-qt-libraries=/usr/qt/3/lib' '--disable-dependency-tracking'
> '--disable-debug' '--without-debug' '--disable-final' '--without-arts'
> '--prefix=/usr/kde/3.5' '--mandir=/usr/kde/3.5/share/man'
> '--infodir=/usr/kde/3.5/share/info'
> * ebuild.sh, line 513: Called die
> * The specific snippet of code:
> * die "econf failed"
> * The die message:
> * econf failed
> *
> * If you need support, post the topmost build error, and the call stack
> if relevant.
> * A complete build log is located at
> '/var/tmp/portage/kde-base/kscreensaver-3.5.9/temp/build.log'.
> * The ebuild environment file is located at
> '/var/tmp/portage/kde-base/kscreensaver-3.5.9/temp/environment'.
> *
>
> * Messages for package kde-base/kscreensaver-3.5.9:
>
> *
> * ERROR: kde-base/kscreensaver-3.5.9 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_compile
> * environment, line 4214: Called kde-meta_src_compile
> * environment, line 2882: Called kde_src_compile
> * environment, line 3047: Called kde_src_compile
> 'src_compile' * environment, line 3167: Called kde_src_compile
> 'src_compile' 'all' 'myconf'
> * environment, line 3154: Called econf 'configure' 'make'
> '--with-gl' '--without-java' '--with-x' '--enable-mitshm'
> '--without-xinerama' '--with-qt-dir=/usr/qt/3' '--enable-mt'
> '--with-qt-libraries=/usr/qt/3/lib' '--disable-dependency-tracking'
> '--disable-debug' '--without-debug' '--disable-final' '--without-arts'
> '--prefix=/usr/kde/3.5' '--mandir=/usr/kde/3.5/share/man'
> '--infodir=/usr/kde/3.5/share/info'
> * ebuild.sh, line 513: Called die
> * The specific snippet of code:
> * die "econf failed"
> * The die message:
> * econf failed
> *
> * If you need support, post the topmost build error, and the call stack
> if relevant.
> * A complete build log is located at
> '/var/tmp/portage/kde-base/kscreensaver-3.5.9/temp/build.log'.
> * The ebuild environment file is located at
> '/var/tmp/portage/kde-base/kscreensaver-3.5.9/temp/environment'.
>
>
> Please help.
>
>
> Thanks,
> Suman Chakrabarty.

HTH.

Xavier Parizet

Suman Chakrabarty 08-28-2008 07:46 AM
emerge kde-meta troubles
 
Xav' wrote:


If you did install kdelibs, then the Qt version that is picked up by
this configure is not the same version you used to compile kdelibs.
The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the
_same Qt version_, compiled with the _same compiler_ and the same Qt
configuration settings.



As he said, you have to reemerge kdelibs first because your Qt version has
changed since the last installation of kdelibs. You can also retry with
adding --update to your emerge command. Posting your emerge --info output can
help us too ;)






Thanks for your quick response. Adding --update did not help.



Here are some output that might be useful. Is this the right way to
reemerge kdelibs? Following command did not do anything.



*~ # emerge -D --newuse kdelibs

Calculating dependencies... done!

>>> Auto-cleaning packages...



>>> No outdated packages were found on your system.



*~ # emerge --info

Portage 2.1.4.4 (default/linux/x86/2008.0, gcc-4.1.2, glibc-2.6.1-r0,
2.6.25-gentoo-r7 i686)

================================================== ===============

System uname: 2.6.25-gentoo-r7 i686 Intel(R) Pentium(R) III Mobile CPU
1133MHz

Timestamp of tree: Wed, 27 Aug 2008 18:16:01 +0000

ccache version 2.4 [enabled]

app-shells/bash:**** 3.2_p33

dev-lang/python:**** 2.4.4-r13, 2.5.2-r6

dev-python/pycrypto: 2.0.1-r6

dev-util/ccache:**** 2.4-r7

sys-apps/baselayout: 1.12.11.1

sys-apps/sandbox:*** 1.2.18.1-r2

sys-devel/autoconf:* 2.61-r2

sys-devel/automake:* 1.7.9-r1, 1.9.6-r2, 1.10.1

sys-devel/binutils:* 2.18-r3

sys-devel/gcc-config: 1.4.0-r4

sys-devel/libtool:** 1.5.26

virtual/os-headers:* 2.6.23-r3

ACCEPT_KEYWORDS="x86"

CBUILD="i686-pc-linux-gnu"

CFLAGS="-O2 -march=i686 -pipe"

CHOST="i686-pc-linux-gnu"

CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config
/usr/kde/3.5/shutdown /usr/share/config"

CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d
/etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/terminfo
/etc/udev/rules.d"

CXXFLAGS="-O2 -march=i686 -pipe"

DISTDIR="/usr/portage/distfiles"

FEATURES="ccache distlocks metadata-transfer sandbox sfperms strict
unmerge-orphans userfetch"

GENTOO_MIRRORS=MailScanner has detected a possible fraud attempt from "mirror.ovh.net" claiming to be "http://mirror.ovh.net/gentoo-distfiles/
ftp://gentoo.imj.fr/pub/gentoo/ http://ftp.first-world.info/
http://ftp.jaist.ac.jp/pub/Linux/Gentoo/
http://ftp.kaist.ac.kr/pub/gentoo/ http://ftp.ncnu.edu.tw/Linux/Gentoo/
http://ftp.cs.pu.edu.tw/Linux/Gentoo/
http://gentoo.cs.nctu.edu.tw/gentoo/ "

LDFLAGS="-Wl,-O1"

MAKEOPTS="-j2"

PKGDIR="/usr/portage/packages"

PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--compress --force --whole-file --delete --stats --timeout=180
--exclude=/distfiles --exclude=/local --exclude=/packages"

PORTAGE_TMPDIR="/var/tmp"

PORTDIR="/usr/portage"

SYNC="rsync://rsync.asia.gentoo.org/gentoo-portage"

USE="X acl berkdb bzip2 cli cracklib crypt cups dbus dri gdbm gpm hal
iconv isdnlog kde midi mudflap ncurses nls nptl nptlonly opengl openmp
pam pcre perl pppd python qt3 qt4 readline reflection session spl ssl
svg sysfs tcpd unicode x86 xorg zlib" ALSA_CARDS="ali5451 als4000
atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370
ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3
trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm
alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958
ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate
route share shm softvol" APACHE2_MODULES="actions alias auth_basic
authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm
authz_default authz_groupfile authz_host authz_owner authz_user
autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires
ext_filter file_cache filter headers include info log_config logio
mem_cache mime mime_magic negotiation rewrite setenvif speling status
unique_id userdir usertrack vhost_alias" ELIBC="glibc"
INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad
cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text"
USERLAND="GNU" VIDEO_CARDS="fbdev glint i810 mach64 mga neomagic nv
r128 radeon savage sis tdfx trident vesa vga via vmware voodoo"

Unset:* CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK,
LANG, LC_ALL, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS,
PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY





Regards,

Suman Chakrabarty.





--

This message has been scanned for viruses and

dangerous content by
MailScanner, and is

believed to be clean.

Xav' 08-28-2008 07:51 AM
emerge kde-meta troubles
 
On Thu, 28 Aug 2008 13:16:57 +0530, Suman Chakrabarty
<suman@sscu.iisc.ernet.in> wrote:
> Xav' wrote:
>>> If you did install kdelibs, then the Qt version that is picked up by
>>> this configure is not the same version you used to compile kdelibs.
>>> The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the
>>> _same Qt version_, compiled with the _same compiler_ and the same Qt
>>> configuration settings.
>>>
>>
>> As he said, you have to reemerge kdelibs first because your Qt version
> has
>> changed since the last installation of kdelibs. You can also retry with
>> adding --update to your emerge command. Posting your emerge --info
> output can
>> help us too ;)
>>
>
>
> Thanks for your quick response. Adding --update did not help.
>
> Here are some output that might be useful. Is this the right way to
> reemerge kdelibs? Following command did not do anything.

Can you post the output of emerge --deep --update --newuse --pretend
--verbose world ?

> ~ # emerge -D --newuse kdelibs
> Calculating dependencies... done!
>>>> Auto-cleaning packages...
>
>>>> No outdated packages were found on your system.
>
> ~ # emerge --info
> Portage 2.1.4.4 (default/linux/x86/2008.0, gcc-4.1.2, glibc-2.6.1-r0,
> 2.6.25-gentoo-r7 i686)
> ================================================== ===============
> System uname: 2.6.25-gentoo-r7 i686 Intel(R) Pentium(R) III Mobile CPU
> 1133MHz
> Timestamp of tree: Wed, 27 Aug 2008 18:16:01 +0000
> ccache version 2.4 [enabled]
> app-shells/bash: 3.2_p33
> dev-lang/python: 2.4.4-r13, 2.5.2-r6
> dev-python/pycrypto: 2.0.1-r6
> dev-util/ccache: 2.4-r7
> sys-apps/baselayout: 1.12.11.1
> sys-apps/sandbox: 1.2.18.1-r2
> sys-devel/autoconf: 2.61-r2
> sys-devel/automake: 1.7.9-r1, 1.9.6-r2, 1.10.1
> sys-devel/binutils: 2.18-r3
> sys-devel/gcc-config: 1.4.0-r4
> sys-devel/libtool: 1.5.26
> virtual/os-headers: 2.6.23-r3
> ACCEPT_KEYWORDS="x86"
> CBUILD="i686-pc-linux-gnu"
> CFLAGS="-O2 -march=i686 -pipe"
> CHOST="i686-pc-linux-gnu"
> CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config
> /usr/kde/3.5/shutdown /usr/share/config"
> CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d
> /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/terminfo
> /etc/udev/rules.d"
> CXXFLAGS="-O2 -march=i686 -pipe"
> DISTDIR="/usr/portage/distfiles"
> FEATURES="ccache distlocks metadata-transfer sandbox sfperms strict
> unmerge-orphans userfetch"
> GENTOO_MIRRORS="http://mirror.ovh.net/gentoo-distfiles/
> ftp://gentoo.imj.fr/pub/gentoo/ http://ftp.first-world.info/
> http://ftp.jaist.ac.jp/pub/Linux/Gentoo/
> http://ftp.kaist.ac.kr/pub/gentoo/ http://ftp.ncnu.edu.tw/Linux/Gentoo/
> http://ftp.cs.pu.edu.tw/Linux/Gentoo/
http://gentoo.cs.nctu.edu.tw/gentoo/
> "
> LDFLAGS="-Wl,-O1"
> MAKEOPTS="-j2"
> PKGDIR="/usr/portage/packages"
> PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
> --compress --force --whole-file --delete --stats --timeout=180
> --exclude=/distfiles --exclude=/local --exclude=/packages"
> PORTAGE_TMPDIR="/var/tmp"
> PORTDIR="/usr/portage"
> SYNC="rsync://rsync.asia.gentoo.org/gentoo-portage"
> USE="X acl berkdb bzip2 cli cracklib crypt cups dbus dri gdbm gpm hal
> iconv isdnlog kde midi mudflap ncurses nls nptl nptlonly opengl openmp
> pam pcre perl pppd python qt3 qt4 readline reflection session spl ssl
> svg sysfs tcpd unicode x86 xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp
> atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938
> es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio
> via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy
> dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat
> linear meter mmap_emul mulaw multi null plug rate route share shm
> softvol" APACHE2_MODULES="actions alias auth_basic authn_alias
> authn_anon authn_dbm authn_default authn_file authz_dbm authz_default
> authz_groupfile authz_host authz_owner authz_user autoindex cache dav
> dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache
> filter headers include info log_config logio mem_cache mime mime_magic
> negotiation rewrite setenvif speling status unique_id userdir usertrack
> vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev"
> KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216
> lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="fbdev glint
> i810 mach64 mga neomagic nv r128 radeon savage sis tdfx trident vesa vga
> via vmware voodoo"
> Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK,
> LANG, LC_ALL, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS,
> PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
>
>
> Regards,
> Suman Chakrabarty.
>
>
>
--
Xavier

Dirk Heinrichs 08-28-2008 07:57 AM
emerge kde-meta troubles
 
Am Donnerstag, 28. August 2008 09:46:57 schrieb ext Suman Chakrabarty:
> Here are some output that might be useful. Is this the right way to
> reemerge kdelibs? Following command did not do anything.
>
> *~ # emerge -D --newuse kdelibs

emerge -1 kdelibs

HTH...

Dirk
--
Dirk Heinrichs | Tel: +49 (0)162 234 3408
Configuration Manager | Fax: +49 (0)211 47068 111
Capgemini Deutschland | Mail: dirk.heinrichs@capgemini.com
Wanheimerstraße 68 | Web: http://www.capgemini.com
D-40468 Düsseldorf | ICQ#: 110037733
GPG Public Key C2E467BB | Keyserver: wwwkeys.pgp.net

Dale 08-28-2008 08:03 AM
emerge kde-meta troubles
 
Suman Chakrabarty wrote:



Thanks for your quick response. Adding --update did not help.

Here are some output that might be useful. Is this the right way to
reemerge kdelibs? Following command did not do anything.


~ # emerge -D --newuse kdelibs
Calculating dependencies... done!
>>> Auto-cleaning packages...

>>> No outdated packages were found on your system.

~ # emerge --info
Portage 2.1.4.4 (default/linux/x86/2008.0, gcc-4.1.2, glibc-2.6.1-r0,
2.6.25-gentoo-r7 i686)

================================================== ===============
System uname: 2.6.25-gentoo-r7 i686 Intel(R) Pentium(R) III Mobile CPU
1133MHz

Timestamp of tree: Wed, 27 Aug 2008 18:16:01 +0000
ccache version 2.4 [enabled]
app-shells/bash: 3.2_p33
dev-lang/python: 2.4.4-r13, 2.5.2-r6
dev-python/pycrypto: 2.0.1-r6
dev-util/ccache: 2.4-r7
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox: 1.2.18.1-r2
sys-devel/autoconf: 2.61-r2
sys-devel/automake: 1.7.9-r1, 1.9.6-r2, 1.10.1
sys-devel/binutils: 2.18-r3
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool: 1.5.26
virtual/os-headers: 2.6.23-r3
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config
/usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d
/etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/terminfo
/etc/udev/rules.d"

CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="ccache distlocks metadata-transfer sandbox sfperms strict
unmerge-orphans userfetch"
GENTOO_MIRRORS=*MailScanner has detected a possible fraud attempt from
"mirror.ovh.net" claiming to be*
"http://mirror.ovh.net/gentoo-distfiles/
ftp://gentoo.imj.fr/pub/gentoo/ http://ftp.first-world.info/
http://ftp.jaist.ac.jp/pub/Linux/Gentoo/
http://ftp.kaist.ac.kr/pub/gentoo/
http://ftp.ncnu.edu.tw/Linux/Gentoo/
http://ftp.cs.pu.edu.tw/Linux/Gentoo/
http://gentoo.cs.nctu.edu.tw/gentoo/ "

LDFLAGS="-Wl,-O1"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--compress --force --whole-file --delete --stats --timeout=180
--exclude=/distfiles --exclude=/local --exclude=/packages"

PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.asia.gentoo.org/gentoo-portage"
USE="X acl berkdb bzip2 cli cracklib crypt cups dbus dri gdbm gpm hal
iconv isdnlog kde midi mudflap ncurses nls nptl nptlonly opengl openmp
pam pcre perl pppd python qt3 qt4 readline reflection session spl ssl
svg sysfs tcpd unicode x86 xorg zlib" ALSA_CARDS="ali5451 als4000
atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370
ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3
trident usb-audio via82xx via82xx-modem ymfpci"
ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty
extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul
mulaw multi null plug rate route share shm softvol"
APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon
authn_dbm authn_default authn_file authz_dbm authz_default
authz_groupfile authz_host authz_owner authz_user autoindex cache dav
dav_fs dav_lock deflate dir disk_cache env expires ext_filter
file_cache filter headers include info log_config logio mem_cache mime
mime_magic negotiation rewrite setenvif speling status unique_id
userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard
mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk
hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU"
VIDEO_CARDS="fbdev glint i810 mach64 mga neomagic nv r128 radeon
savage sis tdfx trident vesa vga via vmware voodoo"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK,
LANG, LC_ALL, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS,
PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY



Regards,
Suman Chakrabarty.



Try this, emerge -1v kdelibs and then try to install the rest. What it
is saying is that you have upgraded qt since kdelibs was last compiled
and it needs to link everything to the new qt. After you reemerge
kdelibs, it should work fine.


Also, what this heck is this about? MailScanner has detected a possible
fraud attempt from "mirror.ovh.net" claiming to be That shouldn't be in
your make.conf file.


Dale

:-) :-) *
*

"Daniel Pielmeier" 08-28-2008 08:15 AM
emerge kde-meta troubles
 
2008/8/28, Dale <dalek1967@bellsouth.net>:
>
> Also, what this heck is this about? MailScanner has detected a possible
> fraud attempt from "mirror.ovh.net" claiming to be That shouldn't be in
> your make.conf file.
>

Just take a look in the signature of thie message. :-)

"This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean."

Don't know what's the scanners problem with the mirror adress though.

Regards,

Daniel

Dale 08-28-2008 08:33 AM
emerge kde-meta troubles
 
Daniel Pielmeier wrote:

2008/8/28, Dale <dalek1967@bellsouth.net>:


Also, what this heck is this about? MailScanner has detected a possible
fraud attempt from "mirror.ovh.net" claiming to be That shouldn't be in
your make.conf file.




Just take a look in the signature of thie message. :-)

"This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean."

Don't know what's the scanners problem with the mirror adress though.

Regards,

Daniel





I was more curious as to how it got into make.conf? I can understand
that it scans email but how did it edit make.conf?


Dale

:-) :-)

Suman Chakrabarty 08-28-2008 12:19 PM
emerge kde-meta troubles
 
Thanks everybody for your helpful replies. :)

> Try this, emerge -1v kdelibs and then try to install the rest. What
> it is saying is that you have upgraded qt since kdelibs was last
> compiled and it needs to link everything to the new qt. After you
> reemerge kdelibs, it should work fine.


It works! I mean emerging kde-meta is not finished yet, but it has gone
past the obstacle (kscreensaver) it was getting stuck at after I have
done "emerge -1v kdelibs". Thanks.

Now my question is: why? "man emerge" says that the -1 option is
equivalent to "--oneshot" which is "Emerge as normal, but do not add the
packages to the world file for later updating." But how does it help
emerge something which was not emerging without -1?! May be I am missing
something obvious, but please explain.


> Also, what this heck is this about? MailScanner has detected a
> possible fraud attempt from "mirror.ovh.net" claiming to be That
> shouldn't be in your make.conf file.

Well, those lines are not there in my make.conf file. But the mail
scanner must have modified the URL in the attachment in some manner to
include those strange warning/error messages. I am not sure about the
working principles of our institute mail server/scanner. :)


Best regards,
Suman Chakrabarty.

"Daniel Pielmeier" 08-28-2008 12:21 PM
emerge kde-meta troubles
 
2008/8/28, Suman Chakrabarty <suman@sscu.iisc.ernet.in>:
> Now my question is: why? "man emerge" says that the -1 option is
> equivalent to "--oneshot" which is "Emerge as normal, but do not add the
> packages to the world file for later updating." But how does it help
> emerge something which was not emerging without -1?! May be I am missing
> something obvious, but please explain.

I guess Dirk suggested to use "--oneshot" because you probably don't
want kdelibs in world. The main issue was that you had to re-emerge
kdelibs to be built against the newer qt version. So "emerge kdelibs"
or "emerge --nodeps kdelibs" is enough but then kdelibs is added to
your world file.

Regards,

Daniel


All times are GMT. The time now is 01:59 PM.
Page 1 of 3 1 23 >
Show 40 post(s) from this thread on one page

VBulletin, Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.