F8 Samba
2007/11/29, Craig White <craig@tobyhouse.com>:
> On Thu, 2007-11-29 at 20:44 +0100, Antonio wrote: > > 2007/11/29, Craig White <craig@tobyhouse.com>: > > > On Thu, 2007-11-29 at 20:06 +0100, Antonio wrote: > > > > 2007/11/29, Craig White <craig@tobyhouse.com>: > > > > > On Thu, 2007-11-29 at 19:22 +0100, Antonio wrote: > > > > > > 2007/11/29, Craig White <craig@tobyhouse.com>: > > > > > > > > > > > Craig...this is the answer.... > > > > > > > > > > > > smbclient -L $SERVER_NAME -U $USER_NAME > > > > > > Unknown parameter encountered: "winbind enable local accounts" > > > > > > Ignoring unknown parameter "winbind enable local accounts" > > > > > > Connection to -U failed (Error NT_STATUS_BAD_NETWORK_NAME) > > > > > ---- > > > > > my fault... > > > > > > > > > > I meant for you to replace $SERVER_NAME with the actual host name of > > > > > your computer and $USER_NAME with your actual samba account name > > > > > > > > > > but first you should try it anonymously to see if samba is up and > > > > > running... > > > > > > > > > > smbclient -L $SERVER_NAME > > > > > > > > > > (again, substitute the proper name) > > > > > > > > > > also...comment this line out... > > > > > # winbind enable local accounts = no > > > > > > > > > > Craig > > > > > > > > > > -- > > > > > fedora-list mailing list > > > > > fedora-list@redhat.com > > > > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > > > > > > > > > smbclient -L Casa > > > > Password: > > > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > > > tree connect failed: NT_STATUS_WRONG_PASSWORD > > > > [root@Casa antonio]# > > > > > > > ---- > > > anonymous is no password...just hit enter key > > > > > > Craig > > > > > > -- > > > fedora-list mailing list > > > fedora-list@redhat.com > > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > smbclient -L Casa > > Password: > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > > > Sharename Type Comment > > --------- ---- ------- > > testsamba Disk > > davide Disk > > IPC$ IPC IPC Service (Samba Server Version > > 3.0.26a-6.fc8) > > ML-1610 Printer Samsung ML-1610 > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > > > Server Comment > > --------- ------- > > CASA Samba Server Version 3.0.26a-6.fc8 > > > > Workgroup Master > > --------- ------- > > WORKGROUP CASA > ---- > that means samba is working > > now if you can connect from your local machine... > > smbclient -L Casa -U $USER_NAME > (substitute your samba/unix name for $USER_NAME) > and enter your password and get the same list, you can connect from any > other computer on your network. > > Craig > > -- > fedora-list mailing list > fedora-list@redhat.com > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > [antonio@Casa ~]$ smbclient -L Casa -U antonio Password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] tree connect failed: NT_STATUS_WRONG_PASSWORD Does it mean that password is wrong??? I synchronized them by Webmin, maybe that something is wrong.... -- Antonio Montagnani Skype : antoniomontag -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list |
F8 Samba
On Thu, 2007-11-29 at 22:41 +0100, Antonio wrote:
> 2007/11/29, Craig White <craig@tobyhouse.com>: > > On Thu, 2007-11-29 at 20:44 +0100, Antonio wrote: > > > 2007/11/29, Craig White <craig@tobyhouse.com>: > > > > On Thu, 2007-11-29 at 20:06 +0100, Antonio wrote: > > > > > 2007/11/29, Craig White <craig@tobyhouse.com>: > > > > > > On Thu, 2007-11-29 at 19:22 +0100, Antonio wrote: > > > > > > > 2007/11/29, Craig White <craig@tobyhouse.com>: > > > > > > > > > > > > > Craig...this is the answer.... > > > > > > > > > > > > > > smbclient -L $SERVER_NAME -U $USER_NAME > > > > > > > Unknown parameter encountered: "winbind enable local accounts" > > > > > > > Ignoring unknown parameter "winbind enable local accounts" > > > > > > > Connection to -U failed (Error NT_STATUS_BAD_NETWORK_NAME) > > > > > > ---- > > > > > > my fault... > > > > > > > > > > > > I meant for you to replace $SERVER_NAME with the actual host name of > > > > > > your computer and $USER_NAME with your actual samba account name > > > > > > > > > > > > but first you should try it anonymously to see if samba is up and > > > > > > running... > > > > > > > > > > > > smbclient -L $SERVER_NAME > > > > > > > > > > > > (again, substitute the proper name) > > > > > > > > > > > > also...comment this line out... > > > > > > # winbind enable local accounts = no > > > > > > > > > > > > Craig > > > > > > > > > > > > -- > > > > > > fedora-list mailing list > > > > > > fedora-list@redhat.com > > > > > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > > > > > > > > > > > > smbclient -L Casa > > > > > Password: > > > > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > > > > tree connect failed: NT_STATUS_WRONG_PASSWORD > > > > > [root@Casa antonio]# > > > > > > > > > ---- > > > > anonymous is no password...just hit enter key > > > > > > > > Craig > > > > > > > > -- > > > > fedora-list mailing list > > > > fedora-list@redhat.com > > > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > > > smbclient -L Casa > > > Password: > > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > > > > > Sharename Type Comment > > > --------- ---- ------- > > > testsamba Disk > > > davide Disk > > > IPC$ IPC IPC Service (Samba Server Version > > > 3.0.26a-6.fc8) > > > ML-1610 Printer Samsung ML-1610 > > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > > > > > Server Comment > > > --------- ------- > > > CASA Samba Server Version 3.0.26a-6.fc8 > > > > > > Workgroup Master > > > --------- ------- > > > WORKGROUP CASA > > ---- > > that means samba is working > > > > now if you can connect from your local machine... > > > > smbclient -L Casa -U $USER_NAME > > (substitute your samba/unix name for $USER_NAME) > > and enter your password and get the same list, you can connect from any > > other computer on your network. > > > > Craig > > > > -- > > fedora-list mailing list > > fedora-list@redhat.com > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > [antonio@Casa ~]$ smbclient -L Casa -U antonio > Password: > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > tree connect failed: NT_STATUS_WRONG_PASSWORD > > > Does it mean that password is wrong??? I synchronized them by Webmin, > maybe that something is wrong.... ---- yeah - forget webmin for a second... try (as root) smbpasswd antonio and re-enter your password Craig -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list |
F8 Samba
2007/11/29, Craig White <craig@tobyhouse.com>:
> On Thu, 2007-11-29 at 22:41 +0100, Antonio wrote: > > 2007/11/29, Craig White <craig@tobyhouse.com>: > > > On Thu, 2007-11-29 at 20:44 +0100, Antonio wrote: > > > > 2007/11/29, Craig White <craig@tobyhouse.com>: > > > > > On Thu, 2007-11-29 at 20:06 +0100, Antonio wrote: > > > > > > 2007/11/29, Craig White <craig@tobyhouse.com>: > > > > > > > On Thu, 2007-11-29 at 19:22 +0100, Antonio wrote: > > > > > > > > 2007/11/29, Craig White <craig@tobyhouse.com>: > > > > > > > > > > > > > > > Craig...this is the answer.... > > > > > > > > > > > > > > > > smbclient -L $SERVER_NAME -U $USER_NAME > > > > > > > > Unknown parameter encountered: "winbind enable local accounts" > > > > > > > > Ignoring unknown parameter "winbind enable local accounts" > > > > > > > > Connection to -U failed (Error NT_STATUS_BAD_NETWORK_NAME) > > > > > > > ---- > > > > > > > my fault... > > > > > > > > > > > > > > I meant for you to replace $SERVER_NAME with the actual host name of > > > > > > > your computer and $USER_NAME with your actual samba account name > > > > > > > > > > > > > > but first you should try it anonymously to see if samba is up and > > > > > > > running... > > > > > > > > > > > > > > smbclient -L $SERVER_NAME > > > > > > > > > > > > > > (again, substitute the proper name) > > > > > > > > > > > > > > also...comment this line out... > > > > > > > # winbind enable local accounts = no > > > > > > > > > > > > > > Craig > > > > > > > > > > > > > > -- > > > > > > > fedora-list mailing list > > > > > > > fedora-list@redhat.com > > > > > > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > > > > > > > > > > > > > > > smbclient -L Casa > > > > > > Password: > > > > > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > > > > > tree connect failed: NT_STATUS_WRONG_PASSWORD > > > > > > [root@Casa antonio]# > > > > > > > > > > > ---- > > > > > anonymous is no password...just hit enter key > > > > > > > > > > Craig > > > > > > > > > > -- > > > > > fedora-list mailing list > > > > > fedora-list@redhat.com > > > > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > > > > > smbclient -L Casa > > > > Password: > > > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > > > > > > > Sharename Type Comment > > > > --------- ---- ------- > > > > testsamba Disk > > > > davide Disk > > > > IPC$ IPC IPC Service (Samba Server Version > > > > 3.0.26a-6.fc8) > > > > ML-1610 Printer Samsung ML-1610 > > > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > > > > > > > Server Comment > > > > --------- ------- > > > > CASA Samba Server Version 3.0.26a-6.fc8 > > > > > > > > Workgroup Master > > > > --------- ------- > > > > WORKGROUP CASA > > > ---- > > > that means samba is working > > > > > > now if you can connect from your local machine... > > > > > > smbclient -L Casa -U $USER_NAME > > > (substitute your samba/unix name for $USER_NAME) > > > and enter your password and get the same list, you can connect from any > > > other computer on your network. > > > > > > Craig > > > > > > -- > > > fedora-list mailing list > > > fedora-list@redhat.com > > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > [antonio@Casa ~]$ smbclient -L Casa -U antonio > > Password: > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > tree connect failed: NT_STATUS_WRONG_PASSWORD > > > > > > Does it mean that password is wrong??? I synchronized them by Webmin, > > maybe that something is wrong.... > ---- > yeah - forget webmin for a second... > > try (as root) > > smbpasswd antonio > > and re-enter your password > > Craig > > -- > fedora-list mailing list > fedora-list@redhat.com > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > smbclient -L Casa -U antonio Password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] Sharename Type Comment --------- ---- ------- IPC$ IPC IPC Service (Samba Server Version 3.0.26a-6.fc8) davide Disk testsamba Disk ML-1610 Printer Samsung ML-1610 Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] Server Comment --------- ------- CASA Samba Server Version 3.0.26a-6.fc8 Workgroup Master --------- ------- WORKGROUP CASA Tnx!!!! it works.....it means that I have to re-issue password for each user??? Tnx for help -- Antonio Montagnani Skype : antoniomontag -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list |
F8 Samba
Antonio wrote:
> 2007/11/29, Craig White <craig@tobyhouse.com>: >> On Thu, 2007-11-29 at 22:41 +0100, Antonio wrote: >>> >>> Does it mean that password is wrong??? I synchronized them by Webmin, >>> maybe that something is wrong.... >> ---- >> yeah - forget webmin for a second... >> >> try (as root) >> >> smbpasswd antonio >> >> and re-enter your password >> >> Craig >> > > > Tnx!!!! it works.....it means that I have to re-issue password for each user??? > > Tnx for help You probably will. Webmin can not create Samba passwords from the passwords in /etc/passwd. The only way you can use the passwords is if you send plain-text password over the network. Windows and Linux uses different password hashing mechanisms. So the encrypted password that Samba uses does not match the one in /etc/passwd. There used to be a section in the Samba docs about this, but I have not looked for it lately. Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup! -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list |
F8 Samba
2007/11/29, Mikkel L. Ellertson <mikkel@infinity-ltd.com>:
> Antonio wrote: > > You probably will. Webmin can not create Samba passwords from the > passwords in /etc/passwd. The only way you can use the passwords is > if you send plain-text password over the network. Windows and Linux > uses different password hashing mechanisms. So the encrypted > password that Samba uses does not match the one in /etc/passwd. > > There used to be a section in the Samba docs about this, but I have > not looked for it lately. > > Mikkel > -- > > Do not meddle in the affairs of dragons, > for thou art crunchy and taste good with Ketchup! > > > -- > fedora-list mailing list > fedora-list@redhat.com > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > On a PC different from Casa.... smbclient -L Casa Connection to Casa failed (Error NT_STATUS_BAD_NETWORK_NAME) -- Antonio Montagnani Skype : antoniomontag -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list |
F8 Samba
On Thu, 2007-11-29 at 23:36 +0100, Antonio wrote:
> 2007/11/29, Mikkel L. Ellertson <mikkel@infinity-ltd.com>: > > Antonio wrote: > > > > You probably will. Webmin can not create Samba passwords from the > > passwords in /etc/passwd. The only way you can use the passwords is > > if you send plain-text password over the network. Windows and Linux > > uses different password hashing mechanisms. So the encrypted > > password that Samba uses does not match the one in /etc/passwd. > > > > There used to be a section in the Samba docs about this, but I have > > not looked for it lately. > > > > Mikkel > > -- > > > > Do not meddle in the affairs of dragons, > > for thou art crunchy and taste good with Ketchup! > > > > > > -- > > fedora-list mailing list > > fedora-list@redhat.com > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > On a PC different from Casa.... > smbclient -L Casa > Connection to Casa failed (Error NT_STATUS_BAD_NETWORK_NAME) ---- add to primary samba server... wins support = yes add to any other samba servers... wins server = w.x.y.z (where w.x.y.z is ip address of your wins server) As for webmin...it is possible (I think...been a while) to set up webmin to automatically create samba user when creating unix user. I don't know if samba password is automatically created from unix user at that time. It cannot convert passwords for existing users but it can import the user list. Craig -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list |
F8 Samba
2007/11/30, Craig White <craig@tobyhouse.com>:
> On Thu, 2007-11-29 at 23:36 +0100, Antonio wrote: > > 2007/11/29, Mikkel L. Ellertson <mikkel@infinity-ltd.com>: > > > Antonio wrote: > > > > > > You probably will. Webmin can not create Samba passwords from the > > > passwords in /etc/passwd. The only way you can use the passwords is > > > if you send plain-text password over the network. Windows and Linux > > > uses different password hashing mechanisms. So the encrypted > > > password that Samba uses does not match the one in /etc/passwd. > > > > > > There used to be a section in the Samba docs about this, but I have > > > not looked for it lately. > > > > > > Mikkel > > > -- > > > > > > Do not meddle in the affairs of dragons, > > > for thou art crunchy and taste good with Ketchup! > > > > > > > > > -- > > > fedora-list mailing list > > > fedora-list@redhat.com > > > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > > > > > > On a PC different from Casa.... > > smbclient -L Casa > > Connection to Casa failed (Error NT_STATUS_BAD_NETWORK_NAME) > ---- > add to primary samba server... > > wins support = yes > > add to any other samba servers... > > wins server = w.x.y.z (where w.x.y.z is ip address of your wins server) > > As for webmin...it is possible (I think...been a while) to set up webmin > to automatically create samba user when creating unix user. I don't know > if samba password is automatically created from unix user at that time. > It cannot convert passwords for existing users but it can import the > user list. > > Craig > > -- > fedora-list mailing list > fedora-list@redhat.com > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Craig, tnx for your help: I am very close to a working solution. But due to a different timezone; I am ready to have a good sleep. Tnx a lot -- Antonio Montagnani Skype : antoniomontag -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list |
F8 Samba
2007/11/30, Antonio <antonio.montagnani@gmail.com>:
> 2007/11/30, Craig White <craig@tobyhouse.com>: > > On Thu, 2007-11-29 at 23:36 +0100, Antonio wrote: > > > 2007/11/29, Mikkel L. Ellertson <mikkel@infinity-ltd.com>: > > > > Antonio wrote: > > > > > > > > > To resume: this is my samba.conf file on one computer: # Samba config file created using SWAT # from 127.0.0.1 (127.0.0.1) # Date: 2007/11/30 00:27:50 [global] server string = Samba Server Version %v security = SHARE passdb backend = tdbsam log file = /var/log/samba/log.%m max log size = 50 wins support = Yes cups options = raw [homes] comment = Home Directories valid users = MYDOMAIN\%S read only = No [printers] comment = All Printers path = /var/spool/samba printable = Yes browseable = No [public] comment = Public Stuff path = /home/antonio read only = No guest ok = Yes This is the output on same computer (logged as anonymous): [antonio@Casa ~]$ smbclient -L Casa -U antonio Password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] Sharename Type Comment --------- ---- ------- homes Disk Home Directories public Disk Public Stuff IPC$ IPC IPC Service (Samba Server Version 3.0.26a-6.fc8) ML-1610 Printer Samsung ML-1610 Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] Server Comment --------- ------- CASA Samba Server Version 3.0.26a-6.fc8 Workgroup Master --------- ------- WORKGROUP CASA I find the command not very reactive, I mean that there is some lag before Password line appears and there is also a stop after sharename section is written... But if I issue same command from another computer (Acer) I get : smbclient -L Casa -U antonio Connection to Casa failed (Error NT_STATUS_BAD_NETWORK_NAME) [antonio@acer ~]$ smbclient -L Acer -U antonio Password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] Sharename Type Comment --------- ---- ------- homes Disk Home Directories musica Disk IPC$ IPC IPC Service (Samba Server Version 3.0.26a-6.fc8) ML-1610 Printer ML-1610 LaserJet_1200 Printer LaserJet_1200 Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] Server Comment --------- ------- ACER Samba Server Version 3.0.26a-6.fc8 Workgroup Master --------- ------- WORKGROUP ACER Connection to Casa failed (ERROR NT_STATUS_BAD_NETWORK_NAME) smbclient -L Casa -U antonio Connection to Casa failed (Error NT_STATUS_BAD_NETWORK_NAME) [antonio@acer ~]$ smbclient -L Acer -U antonio Password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] Sharename Type Comment --------- ---- ------- homes Disk Home Directories musica Disk IPC$ IPC IPC Service (Samba Server Version 3.0.26a-6.fc8) ML-1610 Printer ML-1610 LaserJet_1200 Printer LaserJet_1200 Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] Server Comment --------- ------- ACER Samba Server Version 3.0.26a-6.fc8 Workgroup Master --------- ------- WORKGROUP ACER on both computer, I would expect that in Resources/Network/Windows network I should see at least the computer that I am using.... -- Antonio Montagnani Skype : antoniomontag -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list |
F8 Samba
2007/11/30, Antonio <antonio.montagnani@gmail.com>:
> 2007/11/30, Antonio <antonio.montagnani@gmail.com>: > > 2007/11/30, Craig White <craig@tobyhouse.com>: > > > On Thu, 2007-11-29 at 23:36 +0100, Antonio wrote: > > > > 2007/11/29, Mikkel L. Ellertson <mikkel@infinity-ltd.com>: > > > > > Antonio wrote: > > > > > > > > > > > > > To resume: this is my samba.conf file on one computer: > > > # Samba config file created using SWAT > # from 127.0.0.1 (127.0.0.1) > # Date: 2007/11/30 00:27:50 > > [global] > server string = Samba Server Version %v > security = SHARE > passdb backend = tdbsam > log file = /var/log/samba/log.%m > max log size = 50 > wins support = Yes > cups options = raw > > [homes] > comment = Home Directories > valid users = MYDOMAIN\%S > read only = No > > [printers] > comment = All Printers > path = /var/spool/samba > printable = Yes > browseable = No > > [public] > comment = Public Stuff > path = /home/antonio > read only = No > guest ok = Yes > > This is the output on same computer (logged as anonymous): > > [antonio@Casa ~]$ smbclient -L Casa -U antonio > Password: > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Sharename Type Comment > --------- ---- ------- > homes Disk Home Directories > public Disk Public Stuff > IPC$ IPC IPC Service (Samba Server Version > 3.0.26a-6.fc8) > ML-1610 Printer Samsung ML-1610 > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Server Comment > --------- ------- > CASA Samba Server Version 3.0.26a-6.fc8 > > Workgroup Master > --------- ------- > WORKGROUP CASA > > I find the command not very reactive, I mean that there is some lag > before Password line appears and there is also a stop after sharename > section is written... > > But if I issue same command from another computer (Acer) I get : > smbclient -L Casa -U antonio > Connection to Casa failed (Error NT_STATUS_BAD_NETWORK_NAME) > [antonio@acer ~]$ smbclient -L Acer -U antonio > Password: > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Sharename Type Comment > --------- ---- ------- > homes Disk Home Directories > musica Disk > IPC$ IPC IPC Service (Samba Server Version > 3.0.26a-6.fc8) > ML-1610 Printer ML-1610 > LaserJet_1200 Printer LaserJet_1200 > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Server Comment > --------- ------- > ACER Samba Server Version 3.0.26a-6.fc8 > > Workgroup Master > --------- ------- > WORKGROUP ACER > Connection to Casa failed (ERROR NT_STATUS_BAD_NETWORK_NAME) > > smbclient -L Casa -U antonio > Connection to Casa failed (Error NT_STATUS_BAD_NETWORK_NAME) > [antonio@acer ~]$ smbclient -L Acer -U antonio > Password: > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Sharename Type Comment > --------- ---- ------- > homes Disk Home Directories > musica Disk > IPC$ IPC IPC Service (Samba Server Version > 3.0.26a-6.fc8) > ML-1610 Printer ML-1610 > LaserJet_1200 Printer LaserJet_1200 > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Server Comment > --------- ------- > ACER Samba Server Version 3.0.26a-6.fc8 > > Workgroup Master > --------- ------- > WORKGROUP ACER > > on both computer, I would expect that in Resources/Network/Windows > network I should see at least the computer that I am using.... > -- > Antonio Montagnani > Skype : antoniomontag > and what does it mean??? /usr/bin/findsmb *=DMB +=LMB IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION --------------------------------------------------------------------- I think that at least localhost should be listed,.... Antonio Montagnani Skype : antoniomontag -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list |
F8 Samba
On Fri, 2007-11-30 at 18:10 +0100, Antonio wrote:
> 2007/11/30, Antonio <antonio.montagnani@gmail.com>: > > 2007/11/30, Craig White <craig@tobyhouse.com>: > > > On Thu, 2007-11-29 at 23:36 +0100, Antonio wrote: > > > > 2007/11/29, Mikkel L. Ellertson <mikkel@infinity-ltd.com>: > > > > > Antonio wrote: > > > > > > > > > > > > > To resume: this is my samba.conf file on one computer: > > > # Samba config file created using SWAT > # from 127.0.0.1 (127.0.0.1) > # Date: 2007/11/30 00:27:50 > > [global] > server string = Samba Server Version %v > security = SHARE > passdb backend = tdbsam > log file = /var/log/samba/log.%m > max log size = 50 > wins support = Yes > cups options = raw > > [homes] > comment = Home Directories > valid users = MYDOMAIN\%S > read only = No > > [printers] > comment = All Printers > path = /var/spool/samba > printable = Yes > browseable = No > > [public] > comment = Public Stuff > path = /home/antonio > read only = No > guest ok = Yes > > This is the output on same computer (logged as anonymous): > > [antonio@Casa ~]$ smbclient -L Casa -U antonio > Password: > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Sharename Type Comment > --------- ---- ------- > homes Disk Home Directories > public Disk Public Stuff > IPC$ IPC IPC Service (Samba Server Version > 3.0.26a-6.fc8) > ML-1610 Printer Samsung ML-1610 > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Server Comment > --------- ------- > CASA Samba Server Version 3.0.26a-6.fc8 > > Workgroup Master > --------- ------- > WORKGROUP CASA > > I find the command not very reactive, I mean that there is some lag > before Password line appears and there is also a stop after sharename > section is written... > > But if I issue same command from another computer (Acer) I get : > smbclient -L Casa -U antonio > Connection to Casa failed (Error NT_STATUS_BAD_NETWORK_NAME) > [antonio@acer ~]$ smbclient -L Acer -U antonio > Password: > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Sharename Type Comment > --------- ---- ------- > homes Disk Home Directories > musica Disk > IPC$ IPC IPC Service (Samba Server Version > 3.0.26a-6.fc8) > ML-1610 Printer ML-1610 > LaserJet_1200 Printer LaserJet_1200 > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Server Comment > --------- ------- > ACER Samba Server Version 3.0.26a-6.fc8 > > Workgroup Master > --------- ------- > WORKGROUP ACER > Connection to Casa failed (ERROR NT_STATUS_BAD_NETWORK_NAME) > > smbclient -L Casa -U antonio > Connection to Casa failed (Error NT_STATUS_BAD_NETWORK_NAME) > [antonio@acer ~]$ smbclient -L Acer -U antonio > Password: > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Sharename Type Comment > --------- ---- ------- > homes Disk Home Directories > musica Disk > IPC$ IPC IPC Service (Samba Server Version > 3.0.26a-6.fc8) > ML-1610 Printer ML-1610 > LaserJet_1200 Printer LaserJet_1200 > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.26a-6.fc8] > > Server Comment > --------- ------- > ACER Samba Server Version 3.0.26a-6.fc8 > > Workgroup Master > --------- ------- > WORKGROUP ACER > > on both computer, I would expect that in Resources/Network/Windows > network I should see at least the computer that I am using.... ---- firewall blocking ports 139 and/or 445 on CASA/ACER ? Craig -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list |
| All times are GMT. The time now is 03:31 PM. |
VBulletin, Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.