FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Fedora User

 
 
LinkBack Thread Tools
 
Old 10-08-2012, 07:11 AM
Heinz Diehl
 
Default Repeated segfaults in F17

On 08.10.2012, Temlakos wrote:

> Beginning about an hour ago, I've been hit with a ton of application
> terminations. All of them say the same thing: "Signal 11 (SIGSEGV). Which I
> believe translates as "Signal segmentation violation."
[....]

I bet you have hardware problems. E.g. faulty memory, heat problems or
something like that..

You should run memtest after booting from stick/CD and/or prime95 to
come closer to what's going on.

--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 10-08-2012, 07:46 AM
Ralf Corsepius
 
Default Repeated segfaults in F17

On 10/08/2012 04:38 AM, Temlakos wrote:

Beginning about an hour ago, I've been hit with a ton of application
terminations. All of them say the same thing: "Signal 11 (SIGSEGV).
Which I believe translates as "Signal segmentation violation."


In addition to what others already wrote, check if you aren't running
out of memory (run "df" and check its output).


Ralf


--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 10-08-2012, 12:04 PM
Matthew Miller
 
Default Repeated segfaults in F17

On Mon, Oct 08, 2012 at 09:11:13AM +0200, Heinz Diehl wrote:
> I bet you have hardware problems. E.g. faulty memory, heat problems or
> something like that..

This is likely. The other main possibility is that you've been hacked and
someone installed a rootkit that isn't perfectly compatible with your
system. Weird glitchy behavior is a common symptom.

--
Matthew Miller ☁☁☁ Fedora Cloud Architect ☁☁☁ <mattdm@fedoraproject.org>
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 10-08-2012, 12:15 PM
Patrick O'Callaghan
 
Default Repeated segfaults in F17

On Mon, 2012-10-08 at 09:46 +0200, Ralf Corsepius wrote:
> On 10/08/2012 04:38 AM, Temlakos wrote:
> > Beginning about an hour ago, I've been hit with a ton of application
> > terminations. All of them say the same thing: "Signal 11 (SIGSEGV).
> > Which I believe translates as "Signal segmentation violation."
>
> In addition to what others already wrote, check if you aren't running
> out of memory (run "df" and check its output).

df tells you about free disk space. It has nothing whatever to do with
RAM, besides which a lack of disk space (even in swap) would cause a
system error message, not a segfault.

poc

--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 10-08-2012, 12:55 PM
Temlakos
 
Default Repeated segfaults in F17

On 10/08/2012 03:11 AM, Heinz Diehl wrote:

On 08.10.2012, Temlakos wrote:


Beginning about an hour ago, I've been hit with a ton of application
terminations. All of them say the same thing: "Signal 11 (SIGSEGV). Which I
believe translates as "Signal segmentation violation."

[....]

I bet you have hardware problems. E.g. faulty memory, heat problems or
something like that..

You should run memtest after booting from stick/CD and/or prime95 to
come closer to what's going on.



Several times in the past I have shut down this computer and literally
waited for it to cool off. It always seemed to work, at least nine times
out of ten. But I never really believed that things actually worked that
way. I shut it down overnight, and in the morning most of my problem
applications started working properly again.

--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 10-08-2012, 01:01 PM
Matthew Miller
 
Default Repeated segfaults in F17

On Mon, Oct 08, 2012 at 08:55:03AM -0400, Temlakos wrote:
> Several times in the past I have shut down this computer and
> literally waited for it to cool off. It always seemed to work, at
> least nine times out of ten. But I never really believed that things
> actually worked that way. I shut it down overnight, and in the
> morning most of my problem applications started working properly
> again.

In that case, install and configure lm_sensors, and see just how hot things
are getting. Make sure your system is entirely cleaned from dust and all the
fans are spinning.

--
Matthew Miller ☁☁☁ Fedora Cloud Architect ☁☁☁ <mattdm@fedoraproject.org>
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 10-08-2012, 04:24 PM
Joe Zeff
 
Default Repeated segfaults in F17

On 10/08/2012 05:55 AM, Temlakos wrote:

Several times in the past I have shut down this computer and literally
waited for it to cool off. It always seemed to work, at least nine times
out of ten. But I never really believed that things actually worked that
way. I shut it down overnight, and in the morning most of my problem
applications started working properly again.


Open the box up and use some compressed air to blow all of the dust out.
While you're at it, make sure that all of the air intakes are clear.

--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 10-08-2012, 04:34 PM
Steven Stern
 
Default Repeated segfaults in F17

On 10/08/2012 11:24 AM, Joe Zeff wrote:
> On 10/08/2012 05:55 AM, Temlakos wrote:
>> Several times in the past I have shut down this computer and literally
>> waited for it to cool off. It always seemed to work, at least nine times
>> out of ten. But I never really believed that things actually worked that
>> way. I shut it down overnight, and in the morning most of my problem
>> applications started working properly again.
>
> Open the box up and use some compressed air to blow all of the dust out.
> While you're at it, make sure that all of the air intakes are clear.

Good advice for everyone. I have two cats and the PC sits on a carpeted
floor under my desk. It gets full of dust, hair, and I'm not sure what
much faster that I like to think about. I use Dust-Off about every six
weeks to make sure it runs cool.

--
-- Steve
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 10-08-2012, 04:39 PM
Jack Craig
 
Default Repeated segfaults in F17

On Mon, Oct 8, 2012 at 9:24 AM, Joe Zeff <joe@zeff.us> wrote:

On 10/08/2012 05:55 AM, Temlakos wrote:


Several times in the past I have shut down this computer and literally

waited for it to cool off. It always seemed to work, at least nine times

out of ten. But I never really believed that things actually worked that

way. I shut it down overnight, and in the morning most of my problem

applications started working properly again.




Open the box up and use some compressed air to blow all of the dust out. *While you're at it, make sure that all of the air intakes are clear.

*possibly related issue, I'd like to push deeper on overtemp behavior.

I live on The coast where temp is usually moderate, but last week
we got real close to triple digits.

my PC (asus MB, Intel CPU, < 2 yrs old) is running F16.


when i got home, my dmesg had a number of cpu overtemp msgs,
eg 74K event recorded, see hw logs.

i could hear the cpu fan behaving strangely, it would speed up, then fall off and repeat.
it was like someone in a car, pushing the accelerate to the floor, letting off and as soon as the engine(fan) slows down, it repeats.


I assumed, apparently in error, some damage was done to my MB, heat sensor, other.

I prepare for a maintenance windows Sat am, i shutdown and booted to bios, hoping to find a diagnostics menu to get a better diagnosis for the repair folks.


i could not find any diagnostic option despite a monitor context where cpu fan appeared ok.

i rebooted to Linux and she has been fine.

so now my query, does anyone know of the Linux kernel could have been speeding up the fan or was it likely the MB driving that HW behaviour?


anyone got a clue about this; looking to be better prepared for next time, ...

tia, jackc...


*


--

users mailing list

users@lists.fedoraproject.org

To unsubscribe or change subscription options:

https://admin.fedoraproject.org/mailman/listinfo/users

Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines

Have a question? Ask away: http://ask.fedoraproject.org



--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 10-08-2012, 05:16 PM
Ralf Corsepius
 
Default Repeated segfaults in F17

On 10/08/2012 02:15 PM, Patrick O'Callaghan wrote:

On Mon, 2012-10-08 at 09:46 +0200, Ralf Corsepius wrote:

On 10/08/2012 04:38 AM, Temlakos wrote:

Beginning about an hour ago, I've been hit with a ton of application
terminations. All of them say the same thing: "Signal 11 (SIGSEGV).
Which I believe translates as "Signal segmentation violation."


In addition to what others already wrote, check if you aren't running
out of memory (run "df" and check its output).


df tells you about free disk space.
Yes - My fault. I probably should have written "disk space" instead of
"memory".



It has nothing whatever to do with
RAM,

It depends. C.f. tmpfs, RAM disks etc.


besides which a lack of disk space (even in swap) would cause a
system error message, not a segfault.
When running out of memory, inside of a program a malloc may fail, which
may cause a pointer be set something invalid, which later may cause a
SEGFAULT when the pointer is dereferenced.


All in all, when running out of memory (or swap or tmpfs), all kind of
weird errors can happen - I've seen the weirdest things happen is such
occasions


Ralf


--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 

Thread Tools




All times are GMT. The time now is 04:13 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org