FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Fedora User

 
 
LinkBack Thread Tools
 
Old 01-01-2012, 01:00 AM
"T.C. Hollingsworth"
 
Default RS880 Audio Device (Radeon HD 4200) HDMI sound interface difficulties

On Sat, Dec 31, 2011 at 6:14 PM, Gregory P. Ennis <PoMec@pomec.net> wrote:
> T.C.
>
> Thanks for the advice. *I added the "radeon.audio=1" to the kernel
> command line, but the hdmi still does not function. *I tried to add the
> command to ./grub/menu.lst but looks like that file is not present in
> F16. *I took a look at my install logs and found the following :

F16 switched to using GRUB2 as the bootloader. It uses a slightly
different confiugration file, located in /boot/grub2/grub.cfg.

> [snipped logs]
>
> It looks to me like this kernel is recognizing the hdmi interface, but
> hdmi sound is still not working.

That mainly refers to the video portion of the signal. I'm assuming
that works, given you didn't ask about that first. ;-)

While booted with "radeon.audio=1" set, please run "pacmd info" and
post the output. That dumps PulseAudio's state and may provide clues
as to why your HDMI audio is not working.

> Thanks again for your help!!!

No problem. :-)

-T.C.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 01-01-2012, 05:39 PM
"Gregory P. Ennis"
 
Default RS880 Audio Device (Radeon HD 4200) HDMI sound interface difficulties

On Sat, Dec 31, 2011 at 6:14 PM, Gregory P. Ennis <PoMec@pomec.net> wrote:
> T.C.
>
> Thanks for the advice. I added the "radeon.audio=1" to the kernel
> command line, but the hdmi still does not function. I tried to add the
> command to ./grub/menu.lst but looks like that file is not present in
> F16. I took a look at my install logs and found the following :

F16 switched to using GRUB2 as the bootloader. It uses a slightly
different confiugration file, located in /boot/grub2/grub.cfg.

> [snipped logs]
>
> It looks to me like this kernel is recognizing the hdmi interface, but
> hdmi sound is still not working.

That mainly refers to the video portion of the signal. I'm assuming
that works, given you didn't ask about that first. ;-)

While booted with "radeon.audio=1" set, please run "pacmd info" and
post the output. That dumps PulseAudio's state and may provide clues
as to why your HDMI audio is not working.

> Thanks again for your help!!!

No problem. :-)

-T.C.
-------------------------------------------------

T.C.

Well looks like we have an answer the pulse audio daemon is not even running.chmod o+rw /dev/snd/*,

[root@Re02 ~]# pacmd info
No PulseAudio daemon running, or not running as session daemon.

I did some googling and tried the following :

#1. chmod o+rw /dev/snd/*

After logging out and logging back in the above command made no difference.

#2. authconfig --updateall --nostart
rm -rf ~/.pulse

After logging out and logging back in the above also made no difference

After rebooting with the continued use of radeon.audio=1 on the command
line there was no difference.

Any additional ideas would certainly be appreciated.

Greg




--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 01-01-2012, 05:59 PM
"T.C. Hollingsworth"
 
Default RS880 Audio Device (Radeon HD 4200) HDMI sound interface difficulties

On Sun, Jan 1, 2012 at 11:39 AM, Gregory P. Ennis <PoMec@pomec.net> wrote:
> T.C.
>
> Well looks like we have an answer the pulse audio daemon is not even running.chmod o+rw /dev/snd/*,

Yep, that'll do it. ;-)

What desktop environment do you use? What is the output of:
rpm -qa '*pulseaudio*'

Does your HDMI audio work if you manually run 'start-pulseaudio-x11'?
If not, does 'pacmd info' actually print something after its run?

> [root@Re02 ~]# pacmd info
> No PulseAudio daemon running, or not running as session daemon.
>
> I did some googling and tried the following :
>
> #1. chmod o+rw /dev/snd/*
>
> After logging out and logging back in the above command made no difference.
>
> #2. authconfig --updateall --nostart
> * *rm -rf ~/.pulse
>
> After logging out and logging back in the above also made no difference
>
> After rebooting with the continued use of radeon.audio=1 on the command
> line there was no difference.
>
> Any additional ideas would certainly be appreciated.
>
> Greg

-T.C.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 01-01-2012, 06:27 PM
"Gregory P. Ennis"
 
Default RS880 Audio Device (Radeon HD 4200) HDMI sound interface difficulties

On Sun, Jan 1, 2012 at 11:39 AM, Gregory P. Ennis <PoMec@pomec.net> wrote:
> T.C.
>
> Well looks like we have an answer the pulse audio daemon is not even running.chmod o+rw /dev/snd/*,

Yep, that'll do it. ;-)

What desktop environment do you use? What is the output of:
rpm -qa '*pulseaudio*'

Does your HDMI audio work if you manually run 'start-pulseaudio-x11'?
If not, does 'pacmd info' actually print something after its run?

> [root@Re02 ~]# pacmd info
> No PulseAudio daemon running, or not running as session daemon.
>
> I did some googling and tried the following :
>
> #1. chmod o+rw /dev/snd/*
>
> After logging out and logging back in the above command made no difference.
>
> #2. authconfig --updateall --nostart
> rm -rf ~/.pulse
>
> After logging out and logging back in the above also made no difference
>
> After rebooting with the continued use of radeon.audio=1 on the command
> line there was no difference.
>
> Any additional ideas would certainly be appreciated.
>
> Greg

-T.C.
-------------------------------------------------------

T.C,

I am using gnome, but have kde and xfce installed - have not tried
either of the two at this point.

Here is the output of rpm -qa '*pulseaudio*'

pulseaudio-gdm-hooks-0.9.23-1.fc16.x86_64
pulseaudio-libs-glib2-0.9.23-1.fc16.x86_64
pulseaudio-module-x11-0.9.23-1.fc16.x86_64
pulseaudio-module-bluetooth-0.9.23-1.fc16.x86_64
alsa-plugins-pulseaudio-1.0.24-2.fc15.x86_64
wine-pulseaudio-1.3.33-1.fc16.x86_64
kde-settings-pulseaudio-4.7-14.fc16.noarch
pulseaudio-libs-0.9.23-1.fc16.i686
alsa-plugins-pulseaudio-1.0.24-2.fc15.i686
wine-pulseaudio-1.3.33-1.fc16.i686
pulseaudio-module-gconf-0.9.23-1.fc16.x86_64
pulseaudio-libs-0.9.23-1.fc16.x86_64
pulseaudio-esound-compat-0.9.23-1.fc16.x86_64
pulseaudio-utils-0.9.23-1.fc16.x86_64
pulseaudio-0.9.23-1.fc16.x86_64

I was able to start pulse audio at the user's command line with
'pulseaudio --start' as well as start-pulseaudio-x11. Neither of these
commands resulted in the hdmi sound interface working. The gui of the
hdmi works fine.

Here is the trail of the output of 'pacmd info' :

index: 2
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.2.1"
application.process.id = "2581"
application.process.user = "user"
application.process.host = "Re02.Domain.com"
application.process.binary = "gnome-shell"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "5f1792a4bf6a6a9bb010daff00000010"
application.process.session_id = "5f1792a4bf6a6a9bb010daff00000010-1325445406.789870-1083864899"
index: 3
driver: <cli.c>
owner module: 19
properties:
application.name = "UNIX socket client"
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_05.1>
driver: <module-alsa-card.c>
owner module: 4
properties:
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xf2210000 irq 19"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:05.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "970f"
device.product.name = "RS880 Audio Device [Radeon HD 4200]"
device.string = "1"
device.description = "RS880 Audio Device [Radeon HD 4200]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400)
off: Off (priority 0)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_01_05.1.hdmi-stereo/#0: RS880 Audio Device [Radeon HD 4200] Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_01_05.1.hdmi-stereo.monitor/#0: Monitor of RS880 Audio Device [Radeon HD 4200] Digital Stereo (HDMI)
index: 1
name: <alsa_card.pci-0000_00_14.2>
driver: <module-alsa-card.c>
owner module: 5
properties:
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xf2300000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "0"
device.description = "Internal Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:analog-stereo: Analog Stereo Output (priority 6000)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
input:analog-stereo: Analog Stereo Input (priority 60)
off: Off (priority 0)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_14.2.analog-stereo/#1: Internal Audio Analog Stereo
sources:
alsa_output.pci-0000_00_14.2.analog-stereo.monitor/#1: Monitor of Internal Audio Analog Stereo
alsa_input.pci-0000_00_14.2.analog-stereo/#2: Internal Audio Analog Stereo
0 sink input(s) available.
0 source outputs(s) available.
0 cache entrie(s) available.

Thanks again for your help!!!

Greg

--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 01-01-2012, 06:52 PM
"T.C. Hollingsworth"
 
Default RS880 Audio Device (Radeon HD 4200) HDMI sound interface difficulties

On Sun, Jan 1, 2012 at 12:27 PM, Gregory P. Ennis <PoMec@pomec.net> wrote:
> T.C,
>
> I am using gnome, but have kde and xfce installed - have not tried
> either of the two at this point.

Hmm, does /etc/xdg/autostart/pulseaudio.desktop exist? Not sure why
GNOME isn't autostarting it.

> Here is the output of rpm -qa '*pulseaudio*'
>
> pulseaudio-gdm-hooks-0.9.23-1.fc16.x86_64
> pulseaudio-libs-glib2-0.9.23-1.fc16.x86_64
> pulseaudio-module-x11-0.9.23-1.fc16.x86_64
> pulseaudio-module-bluetooth-0.9.23-1.fc16.x86_64
> alsa-plugins-pulseaudio-1.0.24-2.fc15.x86_64
> wine-pulseaudio-1.3.33-1.fc16.x86_64
> kde-settings-pulseaudio-4.7-14.fc16.noarch
> pulseaudio-libs-0.9.23-1.fc16.i686
> alsa-plugins-pulseaudio-1.0.24-2.fc15.i686
> wine-pulseaudio-1.3.33-1.fc16.i686
> pulseaudio-module-gconf-0.9.23-1.fc16.x86_64
> pulseaudio-libs-0.9.23-1.fc16.x86_64
> pulseaudio-esound-compat-0.9.23-1.fc16.x86_64
> pulseaudio-utils-0.9.23-1.fc16.x86_64
> pulseaudio-0.9.23-1.fc16.x86_64

That looks good.

> I was able to start pulse audio at the user's command line with
> 'pulseaudio --start' as well as start-pulseaudio-x11. * Neither of these
> commands resulted in the hdmi sound interface working. *The gui of the
> hdmi works fine.
>
> Here is the trail of the output of 'pacmd info' :
> [snipped output]

Unfortunately, that is missing the most important part: the "sink
output" section. That should indicate whether or not you're just a
simple pacmd argument away from working HDMI audio. :-)

Please provide the entire output.

>
> Thanks again for *your help!!!
>
> Greg

-T.C.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 01-01-2012, 07:09 PM
"Gregory P. Ennis"
 
Default RS880 Audio Device (Radeon HD 4200) HDMI sound interface difficulties

On Sun, Jan 1, 2012 at 12:27 PM, Gregory P. Ennis <PoMec@pomec.net> wrote:
> T.C,
>
> I am using gnome, but have kde and xfce installed - have not tried
> either of the two at this point.

Hmm, does /etc/xdg/autostart/pulseaudio.desktop exist? Not sure why
GNOME isn't autostarting it.

> Here is the output of rpm -qa '*pulseaudio*'
>
> pulseaudio-gdm-hooks-0.9.23-1.fc16.x86_64
> pulseaudio-libs-glib2-0.9.23-1.fc16.x86_64
> pulseaudio-module-x11-0.9.23-1.fc16.x86_64
> pulseaudio-module-bluetooth-0.9.23-1.fc16.x86_64
> alsa-plugins-pulseaudio-1.0.24-2.fc15.x86_64
> wine-pulseaudio-1.3.33-1.fc16.x86_64
> kde-settings-pulseaudio-4.7-14.fc16.noarch
> pulseaudio-libs-0.9.23-1.fc16.i686
> alsa-plugins-pulseaudio-1.0.24-2.fc15.i686
> wine-pulseaudio-1.3.33-1.fc16.i686
> pulseaudio-module-gconf-0.9.23-1.fc16.x86_64
> pulseaudio-libs-0.9.23-1.fc16.x86_64
> pulseaudio-esound-compat-0.9.23-1.fc16.x86_64
> pulseaudio-utils-0.9.23-1.fc16.x86_64
> pulseaudio-0.9.23-1.fc16.x86_64

That looks good.

> I was able to start pulse audio at the user's command line with
> 'pulseaudio --start' as well as start-pulseaudio-x11. Neither of these
> commands resulted in the hdmi sound interface working. The gui of the
> hdmi works fine.
>
> Here is the trail of the output of 'pacmd info' :
> [snipped output]

Unfortunately, that is missing the most important part: the "sink
output" section. That should indicate whether or not you're just a
simple pacmd argument away from working HDMI audio. :-)

Please provide the entire output.

>
> Thanks again for your help!!!
>
> Greg

-T.C.
-------------------------------------------

T.C.

/etc/xdg/autostart/pulseaudio.desktop does exist and

"Exec=start-pulseaudio-x11" is one of the line items of the file.

Sorry, I did not include the whole output of pacmd here it is :

[user@Re02 ~]$ start-pulseaudio-x11

[user@Re02 ~]$ p pulse
user 2811 1 1 13:18 ? 00:00:00 /usr/bin/pulseaudio --start --log-target=syslog
user 2817 2811 0 13:18 ? 00:00:00 /usr/libexec/pulse/gconf-helper

[user@Re02 ~]$ pacmd info
Welcome to PulseAudio! Use "help" for usage information.
>>> Memory blocks currently allocated: 1, size: 63.9 KiB.
Memory blocks allocated during the whole lifetime: 96, size: 5.1 MiB.
Memory blocks imported from other processes: 0, size: 0 B.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_01_05.1.hdmi-stereo
Default source name: alsa_input.pci-0000_00_14.2.analog-stereo
Memory blocks of type POOL: 1 allocated/1 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/0 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/95 accumulated.
Memory blocks of type IMPORTED: 0 allocated/0 accumulated.
20 module(s) loaded.
index: 0
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "0.9.23"
index: 1
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "0.9.23"
index: 2
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "0.9.23"
index: 3
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "0.9.23"
index: 4
name: <module-alsa-card>
argument: <device_id="1" name="pci-0000_01_05.1" card_name="alsa_card.pci-0000_01_05.1" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1">
used: 0
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "0.9.23"
index: 5
name: <module-alsa-card>
argument: <device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1">
used: 0
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "0.9.23"
index: 6
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "0.9.23"
index: 7
name: <module-bluetooth-discover>
argument: <>
used: -1
load once: yes
properties:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
module.version = "0.9.23"
index: 8
name: <module-esound-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "0.9.23"
index: 9
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "0.9.23"
index: 10
name: <module-gconf>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "0.9.23"
index: 11
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "0.9.23"
index: 12
name: <module-rescue-streams>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
module.version = "0.9.23"
index: 13
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "0.9.23"
index: 14
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based of intended roles of devices"
module.version = "0.9.23"
index: 15
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "0.9.23"
index: 16
name: <module-console-kit>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "0.9.23"
index: 17
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "0.9.23"
index: 18
name: <module-cork-music-on-phone>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Mute or cork music while a phone stream exists"
module.version = "0.9.23"
index: 19
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "0.9.23"
2 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_01_05.1.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9050
volume: 0: 98% 1: 98%
0: -0.60 dB 1: -0.60 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 0 <alsa_card.pci-0000_01_05.1>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xf2210000 irq 19"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:05.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "970f"
device.product.name = "RS880 Audio Device [Radeon HD 4200]"
device.string = "hdmi:1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "RS880 Audio Device [Radeon HD 4200] Digital Stereo (HDMI)"
alsa.mixer_name = "ATI RS690/780 HDMI"
alsa.components = "HDA:1002791a,00791a00,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 1
name: <alsa_output.pci-0000_00_14.2.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 99% 1: 99%
0: -0.27 dB 1: -0.27 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 1 <alsa_card.pci-0000_00_14.2>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC272X Analog"
alsa.id = "ALC272X Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xf2300000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internal Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC272X"
alsa.components = "HDA:10ec0272,1025036e,00100001"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900)
analog-output-speaker: Analog Speakers (priority 10000)
analog-output-headphones: Analog Headphones (priority 9000)
active port: <analog-output-speaker>
3 source(s) available.
index: 0
name: <alsa_output.pci-0000_01_05.1.hdmi-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1050
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_01_05.1>
module: 4
properties:
device.description = "Monitor of RS880 Audio Device [Radeon HD 4200] Digital Stereo (HDMI)"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xf2210000 irq 19"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:05.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "970f"
device.product.name = "RS880 Audio Device [Radeon HD 4200]"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 1
name: <alsa_output.pci-0000_00_14.2.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
monitor_of: 1
card: 1 <alsa_card.pci-0000_00_14.2>
module: 5
properties:
device.description = "Monitor of Internal Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xf2300000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 2
name: <alsa_input.pci-0000_00_14.2.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 8% 1: 8%
0: -66.04 dB 1: -66.04 dB
balance 0.00
base volume: 10%
-60.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 1 <alsa_card.pci-0000_00_14.2>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC272X Analog"
alsa.id = "ALC272X Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xf2300000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internal Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC272X"
alsa.components = "HDA:10ec0272,1025036e,00100001"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
4 client(s) logged in.
index: 0
driver: <module-console-kit.c>
owner module: 16
properties:
application.name = "ConsoleKit Session /org/freedesktop/ConsoleKit/Session4"
console-kit.session = "/org/freedesktop/ConsoleKit/Session4"
index: 1
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.2.2"
application.process.id = "2550"
application.process.user = "user"
application.process.host = "Re02.Domain.com"
application.process.binary = "gnome-settings-daemon"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "5f1792a4bf6a6a9bb010daff00000010"
application.process.session_id = "5f1792a4bf6a6a9bb010daff00000010-1325445406.789870-1083864899"
index: 2
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.2.1"
application.process.id = "2581"
application.process.user = "user"
application.process.host = "Re02.Domain.com"
application.process.binary = "gnome-shell"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "5f1792a4bf6a6a9bb010daff00000010"
application.process.session_id = "5f1792a4bf6a6a9bb010daff00000010-1325445406.789870-1083864899"
index: 3
driver: <cli.c>
owner module: 19
properties:
application.name = "UNIX socket client"
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_05.1>
driver: <module-alsa-card.c>
owner module: 4
properties:
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xf2210000 irq 19"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:05.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "970f"
device.product.name = "RS880 Audio Device [Radeon HD 4200]"
device.string = "1"
device.description = "RS880 Audio Device [Radeon HD 4200]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400)
off: Off (priority 0)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_01_05.1.hdmi-stereo/#0: RS880 Audio Device [Radeon HD 4200] Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_01_05.1.hdmi-stereo.monitor/#0: Monitor of RS880 Audio Device [Radeon HD 4200] Digital Stereo (HDMI)
index: 1
name: <alsa_card.pci-0000_00_14.2>
driver: <module-alsa-card.c>
owner module: 5
properties:
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xf2300000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "0"
device.description = "Internal Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:analog-stereo: Analog Stereo Output (priority 6000)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
input:analog-stereo: Analog Stereo Input (priority 60)
off: Off (priority 0)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_14.2.analog-stereo/#1: Internal Audio Analog Stereo
sources:
alsa_output.pci-0000_00_14.2.analog-stereo.monitor/#1: Monitor of Internal Audio Analog Stereo
alsa_input.pci-0000_00_14.2.analog-stereo/#2: Internal Audio Analog Stereo
0 sink input(s) available.
0 source outputs(s) available.
0 cache entrie(s) available.






--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 01-01-2012, 08:16 PM
"T.C. Hollingsworth"
 
Default RS880 Audio Device (Radeon HD 4200) HDMI sound interface difficulties

On Sun, Jan 1, 2012 at 1:09 PM, Gregory P. Ennis <PoMec@pomec.net> wrote:
> T.C.
>
> /etc/xdg/autostart/pulseaudio.desktop does exist and
>
> "Exec=start-pulseaudio-x11" is one of the line items of the file.

That's very weird. I don't understand why it doesn't autostart. You
should probably file a bug about this.

In the meantime try adding pulseaudio to your user-specific autostart
directory and see if that makes it go:
mkdir -p ~/.config/autostart
cp /etc/xdg/autostart/pulseaudio.desktop ~/.config/autostart/

> Sorry, I did not include the whole output of pacmd here it is :
> [snipped output]

For starters, both your regular audio and HDMI audio devices are
suspended. That might be related to the fact that PulseAudio is
starting late; something else might be locking the ALSA device. You
can try to un-suspend your audio devices by running:
pacmd suspend false

If that gives you some sort of error, you probably have to fix
pulseaudio autostarting first.

Now, lets forcibly play some sound through your HDMI audio. If you
have amarok installed, this will work, or you can point it to any OGG
or WAV audio file (there are a bunch in /usr/share/sounds):
pacmd play-file /usr/share/kde4/apps/amarok/data/first_run_jingle.ogg 0

If that works, try playing some sound in a normal application and see
if your HDMI audio works then too.

If that doesn't work, change the 0 at the end of that command to a 1
and run it again. If sound comes out of your laptop's internal
speakers, PulseAudio is working and it's just an HDMI problem. If no
sound comes out of them, something is wrong with PulseAudio in general
(or possibly the file you tried to play doesn't exist or work). If
you haven't sorted out the autostarting yet, that's probably related.

-T.C.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 01-01-2012, 09:32 PM
"Gregory P. Ennis"
 
Default RS880 Audio Device (Radeon HD 4200) HDMI sound interface difficulties

On Sun, Jan 1, 2012 at 1:09 PM, Gregory P. Ennis <PoMec@pomec.net> wrote:
> T.C.
>
> /etc/xdg/autostart/pulseaudio.desktop does exist and
>
> "Exec=start-pulseaudio-x11" is one of the line items of the file.

That's very weird. I don't understand why it doesn't autostart. You
should probably file a bug about this.

In the meantime try adding pulseaudio to your user-specific autostart
directory and see if that makes it go:
mkdir -p ~/.config/autostart
cp /etc/xdg/autostart/pulseaudio.desktop ~/.config/autostart/

> Sorry, I did not include the whole output of pacmd here it is :
> [snipped output]

For starters, both your regular audio and HDMI audio devices are
suspended. That might be related to the fact that PulseAudio is
starting late; something else might be locking the ALSA device. You
can try to un-suspend your audio devices by running:
pacmd suspend false

If that gives you some sort of error, you probably have to fix
pulseaudio autostarting first.

Now, lets forcibly play some sound through your HDMI audio. If you
have amarok installed, this will work, or you can point it to any OGG
or WAV audio file (there are a bunch in /usr/share/sounds):
pacmd play-file /usr/share/kde4/apps/amarok/data/first_run_jingle.ogg 0

If that works, try playing some sound in a normal application and see
if your HDMI audio works then too.

If that doesn't work, change the 0 at the end of that command to a 1
and run it again. If sound comes out of your laptop's internal
speakers, PulseAudio is working and it's just an HDMI problem. If no
sound comes out of them, something is wrong with PulseAudio in general
(or possibly the file you tried to play doesn't exist or work). If
you haven't sorted out the autostarting yet, that's probably related.

-T.C.
-------------------------------------------------------------

T.C.

For some reason pulseaudio is starting now. I don't think my original
observation was wrong, but ... Before I set up the .config/autstart in
the users account I did a reboot and when I logged in pulseaudio was
active.

running 'pacmd suspend false' resulted in :
"Welcome to PulseAudio! Use "help" for usage information"

this did not stop the puluseaudio daemon.

I made sure the hdmi was selected in the output tab of the "Sound"
System settings as well as being selected in the Hardware tab.
After this I ran :

pacmd play-file /usr/share/kde4/apps/amarok/data/first_run_jingle.ogg 0

Which did not result in anything

Then I ran
pacmd play-file /usr/share/kde4/apps/amarok/data/first_run_jingle.ogg 1

Which resulted in playing the jingle on the laptop's speakers.

Thanks much for your debugging expertise. Do you think it is time for
me to file a bug????

Greg





--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 
Old 01-01-2012, 10:29 PM
"Gregory P. Ennis"
 
Default RS880 Audio Device (Radeon HD 4200) HDMI sound interface difficulties

T.C.

For some reason pulseaudio is starting now. I don't think my original
observation was wrong, but ... Before I set up the .config/autstart in
the users account I did a reboot and when I logged in pulseaudio was
active.

running 'pacmd suspend false' resulted in :
"Welcome to PulseAudio! Use "help" for usage information"

this did not stop the puluseaudio daemon.

I made sure the hdmi was selected in the output tab of the "Sound"
System settings as well as being selected in the Hardware tab.
After this I ran :

pacmd play-file /usr/share/kde4/apps/amarok/data/first_run_jingle.ogg 0

Which did not result in anything

Then I ran
pacmd play-file /usr/share/kde4/apps/amarok/data/first_run_jingle.ogg 1

Which resulted in playing the jingle on the laptop's speakers.

Thanks much for your debugging expertise. Do you think it is time for
me to file a bug????

Greg

--------------------------------------------------------------------------

T.C.

I have it working now. Before I filed a bug report I decided to enter
the "radeon.audio=1" to the /boot/grub2/grub.cfg file. When I rebooted
it worked perfectly. I'm not sure what I did added the radeon command
in the boot menu, but what every was wrong is now fixed.

Thank you again for sharing your expertise.... sure appreciate your
help.

Greg





--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
 

Thread Tools




All times are GMT. The time now is 07:00 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org