On Sun, 2011-12-04 at 14:19 +1000, david walcroft wrote:
> I can not burn an ISO,there are no error messages,it recognizes a medium
> and completes it's md5sum and stops.It also cannot format and erase.This
> is on an FC16 i686 install.
> Any ideas.
----
Places to check for errors...
(as root)
dmesg
/var/log/messages
as user... open a virtual console (konsole in KDE - terminal in Gnome),
start k3b simply by typing 'k3b' and pressing enter. If there are
errors, they should be printed to standard out (the virtual console).
Craig
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
12-04-2011, 05:38 AM
david walcroft
K3B burning problem
On 12/04/2011 02:33 PM, Craig White wrote:
> On Sun, 2011-12-04 at 14:19 +1000, david walcroft wrote:
>> I can not burn an ISO,there are no error messages,it recognizes a medium
>> and completes it's md5sum and stops.It also cannot format and erase.This
>> is on an FC16 i686 install.
>> Any ideas.
> ----
> Places to check for errors...
>
> (as root)
> dmesg
> /var/log/messages
>
> as user... open a virtual console (konsole in KDE - terminal in Gnome),
> start k3b simply by typing 'k3b' and pressing enter. If there are
> errors, they should be printed to standard out (the virtual console).
>
> Craig
>
>
I have looked in 'dmesg' and '/var/log/messages',there are no error
messages.
I tried the remove and reinstall trick but nothing changed.
Thanks david
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
12-04-2011, 06:12 AM
Paul Allen Newell
K3B burning problem
On 12/03/2011 10:38 PM, david walcroft wrote:
> On 12/04/2011 02:33 PM, Craig White wrote:
>>
>> ----
>> Places to check for errors...
>>
>> [...]
>>
>> Craig
>>
>>
> I have looked in 'dmesg' and '/var/log/messages',there are no error
> messages.
> I tried the remove and reinstall trick but nothing changed.
>
> Thanks david
David:
Am I correct in assuming that this worked for you in F14 and/or F15? I
am asking as I am gearing up to kicking up to F16 from F14 and am a bit
scared by this report that k3b might not be behaving.
Thanks for info,
Paul
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
12-04-2011, 06:17 AM
david walcroft
K3B burning problem
On 12/04/2011 05:12 PM, Paul Allen Newell wrote:
> On 12/03/2011 10:38 PM, david walcroft wrote:
>> On 12/04/2011 02:33 PM, Craig White wrote:
>>>
>>> ----
>>> Places to check for errors...
>>>
>>> [...]
>>>
>>> Craig
>>>
>>>
>> I have looked in 'dmesg' and '/var/log/messages',there are no error
>> messages.
>> I tried the remove and reinstall trick but nothing changed.
>>
>> Thanks david
>
> David:
>
> Am I correct in assuming that this worked for you in F14 and/or F15? I
> am asking as I am gearing up to kicking up to F16 from F14 and am a bit
> scared by this report that k3b might not be behaving.
>
> Thanks for info,
> Paul
>
I have just upgraded from FC12 where it worked reasonably.
david
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
12-04-2011, 06:22 AM
Paul Allen Newell
K3B burning problem
On 12/03/2011 11:17 PM, david walcroft wrote:
>
> I have just upgraded from FC12 where it worked reasonably.
>
> david
David:
Thanks for the info. Through this list, I learned about k3b and
installed it on F14. I haven't had any problems. I am offering this info
if there does prove to be a problem so that it might be able to be
pegged to f14 to f16 rather than f12 to f16.
That being said, I really hope there isn't a problem ...
Paul
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
12-04-2011, 08:43 AM
John Pilkington
K3B burning problem
On 04/12/11 06:38, david walcroft wrote:
> On 12/04/2011 02:33 PM, Craig White wrote:
>> On Sun, 2011-12-04 at 14:19 +1000, david walcroft wrote:
>>> I can not burn an ISO,there are no error messages,it recognizes a medium
>>> and completes it's md5sum and stops.It also cannot format and erase.This
>>> is on an FC16 i686 install.
>>> Any ideas.
>> ----
>> Places to check for errors...
>>
>> (as root)
>> dmesg
>> /var/log/messages
>>
>> as user... open a virtual console (konsole in KDE - terminal in Gnome),
>> start k3b simply by typing 'k3b' and pressing enter. If there are
>> errors, they should be printed to standard out (the virtual console).
>>
>> Craig
>>
>>
> I have looked in 'dmesg' and '/var/log/messages',there are no error
> messages.
> I tried the remove and reinstall trick but nothing changed.
>
> Thanks david
I had a problem recently with k3b on a system that had gone through a
couple of 'preupgrade' cycles. It was apparently using stale pointers
to the audio notification files, but AIUI it also showed problems in Qt.
Are you passing a full file path in the 'Image to Burn' window?
John P
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
12-05-2011, 04:51 AM
david walcroft
K3B burning problem
On 12/04/2011 07:43 PM, John Pilkington wrote:
> On 04/12/11 06:38, david walcroft wrote:
>> On 12/04/2011 02:33 PM, Craig White wrote:
>>> On Sun, 2011-12-04 at 14:19 +1000, david walcroft wrote:
>>>> I can not burn an ISO,there are no error messages,it recognizes a medium
>>>> and completes it's md5sum and stops.It also cannot format and erase.This
>>>> is on an FC16 i686 install.
>>>> Any ideas.
>>> ----
>>> Places to check for errors...
>>>
>>> (as root)
>>> dmesg
>>> /var/log/messages
>>>
>>> as user... open a virtual console (konsole in KDE - terminal in Gnome),
>>> start k3b simply by typing 'k3b' and pressing enter. If there are
>>> errors, they should be printed to standard out (the virtual console).
>>>
>>> Craig
>>>
>>>
>> I have looked in 'dmesg' and '/var/log/messages',there are no error
>> messages.
>> I tried the remove and reinstall trick but nothing changed.
>>
>> Thanks david
>
> I had a problem recently with k3b on a system that had gone through a
> couple of 'preupgrade' cycles. It was apparently using stale pointers
> to the audio notification files, but AIUI it also showed problems in Qt.
> Are you passing a full file path in the 'Image to Burn' window?
>
> Bug references:
>
> https://bugs.kde.org/show_bug.cgi?id=284966
>
> https://bugzilla.redhat.com/show_bug.cgi?id=749213
>
> k3b burns isos fine for me on f14
>
> John P
Thanks john,
I downloaded the K3B-2.0.2 tar file to see if that would make a
difference but ran into more problems with 'cmake'--
[david@reddwarf build]$ cmake ..
-- The C compiler identification is unknown
-- The CXX compiler identification is unknown
CMake Error: your C compiler: "CMAKE_C_COMPILER-NOTFOUND" was not found.
Please set CMAKE_C_COMPILER to a valid compiler path or name.
CMake Error: your CXX compiler: "CMAKE_CXX_COMPILER-NOTFOUND" was not
found. Please set CMAKE_CXX_COMPILER to a valid compiler path or name.
CMake Error at icons/actions/CMakeLists.txt:1 (kde4_install_icons):
Unknown CMake command "kde4_install_icons".
I have never used cmake before so I do not understand what is required.
Thanks david
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
12-05-2011, 06:10 PM
Rex Dieter
K3B burning problem
david walcroft wrote:
> Thanks john,
> I downloaded the K3B-2.0.2 tar file to see if that would make a
> difference but ran into more problems with 'cmake'--
>
> [david@reddwarf build]$ cmake ..
> -- The C compiler identification is unknown
> -- The CXX compiler identification is unknown
> CMake Error: your C compiler: "CMAKE_C_COMPILER-NOTFOUND" was not found.
> Please set CMAKE_C_COMPILER to a valid compiler path or name.
> CMake Error: your CXX compiler: "CMAKE_CXX_COMPILER-NOTFOUND" was not
> found. Please set CMAKE_CXX_COMPILER to a valid compiler path or name.
> CMake Error at icons/actions/CMakeLists.txt:1 (kde4_install_icons):
> Unknown CMake command "kde4_install_icons".
>
> I have never used cmake before so I do not understand what is required.
You have no compiler installed. if You really want to build this, I'd
suggest: (as root):
yum install @development-tools
then
yum-builddep k3b
-- rex
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
12-05-2011, 08:41 PM
david walcroft
K3B burning problem
On 12/06/2011 05:10 AM, Rex Dieter wrote:
david walcroft wrote:
Thanks john,
I downloaded the K3B-2.0.2 tar file to see if that would make a
difference but ran into more problems with 'cmake'--
[david@reddwarf build]$ cmake ..
-- The C compiler identification is unknown
-- The CXX compiler identification is unknown
CMake Error: your C compiler: "CMAKE_C_COMPILER-NOTFOUND" was not found.
Please set CMAKE_C_COMPILER to a valid compiler path or name.
CMake Error: your CXX compiler: "CMAKE_CXX_COMPILER-NOTFOUND" was not
found. Please set CMAKE_CXX_COMPILER to a valid compiler path or name.
CMake Error at icons/actions/CMakeLists.txt:1 (kde4_install_icons):
Unknown CMake command "kde4_install_icons".
I have never used cmake before so I do not understand what is required.
You have no compiler installed. if You really want to build this, I'd
suggest: (as root):
yum install @development-tools
then
yum-builddep k3b
-- rex
Thanks rex,it worked well downloaded all the files but ran into another
problem of which I can not fix :-
[david@reddwarf ~]$ cd tmp/k3b-2.0.2/build
[david@reddwarf build]$ cmake ..
-- The C compiler identification is GNU
-- The CXX compiler identification is GNU
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
CMake Error at icons/actions/CMakeLists.txt:1 (kde4_install_icons):
Unknown CMake command "kde4_install_icons".
I checked, ls icons/actions/CMakeFiles/ 'CMakefiles' is all thats in
that dir.
I have included as an attachment the 'CMakeLists.txt'
#kde4_add_dcop_skels(k3b_SRCS );
MESSAGE(STATUS "DCOP stuff was remove into kde4, convert it to dbus please.kde4_add_dcop_skels macro doesn't exist now. We keep it just to remember to port to dbus")
if (MSVC)
# msvc creates importlibs by default also for executables when symbols are exported.
# Because the output name of the executable is the same as one of the used library (k3b) creating
# the importlibrary fails with LINK : fatal error LNK1149: output filename matches input filename
# we worked around this issue by using a different name for the unused import library created by the linker
string(REPLACE "/implib:<TARGET_IMPLIB>" "/implib:<TARGET_IMPLIB>_" CMAKE_CXX_LINK_EXECUTABLE ${CMAKE_CXX_LINK_EXECUTABLE})
endif (MSVC)
set( SHARED_MIME_INFO_MINIMUM_VERSION "0.23" )
find_package( SharedMimeInfo REQUIRED )
install( FILES x-k3b.xml DESTINATION ${XDG_MIME_INSTALL_DIR} )
update_xdg_mimetypes( ${XDG_MIME_INSTALL_DIR} )
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
12-06-2011, 03:24 PM
Rex Dieter
K3B burning problem
david walcroft wrote:
> On 12/06/2011 05:10 AM, Rex Dieter wrote:
>> david walcroft wrote:
>>
>>> Thanks john,
>>> I downloaded the K3B-2.0.2 tar file to see if that would make a
>>> difference but ran into more problems with 'cmake'--
>>>
>>> [david@reddwarf build]$ cmake ..
>>> -- The C compiler identification is unknown
>>> -- The CXX compiler identification is unknown
>>> CMake Error: your C compiler: "CMAKE_C_COMPILER-NOTFOUND" was not found.
>>> Please set CMAKE_C_COMPILER to a valid compiler path or name.
>>> CMake Error: your CXX compiler: "CMAKE_CXX_COMPILER-NOTFOUND" was not
>>> found. Please set CMAKE_CXX_COMPILER to a valid compiler path or name.
>>> CMake Error at icons/actions/CMakeLists.txt:1 (kde4_install_icons):
>>> Unknown CMake command "kde4_install_icons".
>>>
>>> I have never used cmake before so I do not understand what is required.
>>
>> You have no compiler installed. if You really want to build this, I'd
>> suggest: (as root):
>>
>> yum install @development-tools
>> then
>> yum-builddep k3b
>>
>> -- rex
>>
> Thanks rex,it worked well downloaded all the files but ran into another
> problem of which I can not fix :-
> [david@reddwarf ~]$ cd tmp/k3b-2.0.2/build
> [david@reddwarf build]$ cmake ..
> -- The C compiler identification is GNU
> -- The CXX compiler identification is GNU
> -- Check for working C compiler: /usr/bin/gcc
> -- Check for working C compiler: /usr/bin/gcc -- works
> -- Detecting C compiler ABI info
> -- Detecting C compiler ABI info - done
> -- Check for working CXX compiler: /usr/bin/c++
> -- Check for working CXX compiler: /usr/bin/c++ -- works
> -- Detecting CXX compiler ABI info
> -- Detecting CXX compiler ABI info - done
> CMake Error at icons/actions/CMakeLists.txt:1 (kde4_install_icons):
> Unknown CMake command "kde4_install_icons".
Youre still missing kde development files, did you do:
yum-builddep k3b ?
in particular,
rpm -q kdelibs-devel
(should report something installed)
-- rex
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org