FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Fedora User

 
 
LinkBack Thread Tools
 
Old 03-19-2008, 09:55 PM
Jim
 
Default Via High Definition Audio Controller

FC8-i386 KDE 2.6.24.3-34.fc8
My Sound card in a laptop is a VIA Tech, "VIA High Definition Audio
Controller" and all the drivers are loading but it has no sound.
I have heard through the Grapvine that the PCM device VT1708 was broken
in 2.6.24, any truth to that ?
The Soundcard Detection debug files are listed below, scsrun.log and
scsconfig.log.

Who can read and understand these two files.


scsrun.log


------- System Config Soundcard Log --------
Wed Mar 19 17:27:52 EDT 2008

aplay: main:546: audio open error: Device or resource busy
*** PULSEAUDIO: Unable to connect: Connection refused
amixer: Mixer attach default error: Connection refused
*** PULSEAUDIO: Unable to connect: Connection refused
amixer: Mixer attach default error: Connection refused
ProbeCards, method = hal
--------- Card 0 --------
Active 1
Vendor: VIA Technologies, Inc.
Model: VIA High Definition Audio Controller
Driver: snd-hda-intel

Volume: 75
Devices:
[[0, ' VT1708 Analog ']]
Test device 0
--------- Card 1 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 2 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 3 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 4 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 5 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 6 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 7 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
ProbeCards, method = kudzu
--------- Card 0 --------
Active 1
Vendor: VIA
Model: Technologies, Inc. VIA High Definition Audio Controller
Driver: snd-hda-intel

Volume: 75
Devices:
[[0, ' VT1708 Analog ']]
Test device 0
--------- Card 1 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 2 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 3 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 4 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 5 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 6 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 7 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
ProbeCards, method = proc
--------- Card 0 --------
Active 1
Vendor: None
Model: HDA VIA VT82xx
Driver: snd-hda-intel

Volume: 75
Devices:
[[0, ' VT1708 Analog ']]
Test device 0
--------- Card 1 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 2 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 3 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 4 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 5 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 6 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
--------- Card 7 --------
Active 0
Vendor: None
Model:
Driver:

Volume: 75
Devices:
[]
Test device 0
Running from command-line...


scsconfig.log


------- System Config Soundcard Log --------
Wed Mar 19 17:28:20 EDT 2008

------- lspci --------
00:00.0 Host bridge: VIA Technologies, Inc. CX700 Host Bridge (rev 10)
00:00.1 Host bridge: VIA Technologies, Inc. CX700 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CX700 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CX700 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CX700 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CX700 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0f.0 IDE interface: VIA Technologies, Inc. Unknown device 0581
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 90)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 90)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 90)

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. CX700 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. CX700 Internal Module Bus
00:13.0 PCI bridge: VIA Technologies, Inc. CX700 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. CX700 PCI to PCI Bridge
01:00.0 VGA compatible controller: VIA Technologies, Inc. CX700M2
UniChrome PRO II Graphics (rev 03)
02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio
Controller (rev 10)
03:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)


------- lspci -vn --------
00:00.0 0600: 1106:0324 (rev 10)
Subsystem: 1106:0324
Flags: bus master, medium devsel, latency 8
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [80] AGP version 3.5
Capabilities: [50] Power Management version 2
Kernel driver in use: agpgart-via

00:00.1 0600: 1106:1324
Flags: bus master, medium devsel, latency 0

00:00.2 0600: 1106:2324
Flags: bus master, medium devsel, latency 0

00:00.3 0600: 1106:3324
Flags: bus master, medium devsel, latency 0

00:00.4 0600: 1106:4324
Flags: bus master, medium devsel, latency 0

00:00.7 0600: 1106:7324
Flags: bus master, medium devsel, latency 0

00:01.0 0604: 1106:b198 (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d0000000-d0ffffff
Prefetchable memory behind bridge: a0000000-bfffffff
Capabilities: [70] Power Management version 2

00:0f.0 0101: 1106:0581 (prog-if 8a [Master SecP PriP])
Subsystem: 1509:2f07
Flags: bus master, medium devsel, latency 64
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at 4460 [size=16]
Capabilities: [b0] Power Management version 2
Kernel driver in use: pata_via
Kernel modules: pata_via

00:10.0 0c03: 1106:3038 (rev 90) (prog-if 00 [UHCI])
Subsystem: 1509:2f07
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at 4400 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:10.1 0c03: 1106:3038 (rev 90) (prog-if 00 [UHCI])
Subsystem: 1509:2f07
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at 4420 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:10.2 0c03: 1106:3038 (rev 90) (prog-if 00 [UHCI])
Subsystem: 1509:2f07
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at 4440 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:10.4 0c03: 1106:3104 (rev 90) (prog-if 20 [EHCI])
Subsystem: 1509:2f07
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at d1400000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Capabilities: [88] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:11.0 0601: 1106:8324
Subsystem: 1509:2f07
Flags: medium devsel
Capabilities: [c0] Power Management version 2
Kernel modules: i2c-viapro

00:11.7 0600: 1106:324e
Subsystem: 1106:324e
Flags: bus master, medium devsel, latency 8
Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration

00:13.0 0604: 1106:324b (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d1000000-d10fffff

00:13.1 0604: 1106:324a (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d1100000-d11fffff

01:00.0 0300: 1106:3157 (rev 03) (prog-if 00 [VGA controller])
Subsystem: 1509:2f07
Flags: bus master, 66MHz, medium devsel, latency 16, IRQ 20
Memory at a0000000 (32-bit, prefetchable) [size=512M]
Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [60] Power Management version 2
Capabilities: [70] AGP version 3.0

02:01.0 0403: 1106:3288 (rev 10)
Subsystem: 1509:2f07
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at d1000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-

Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

03:09.0 0200: 10ec:8139 (rev 10)
Subsystem: 1509:2f07
Flags: bus master, medium devsel, latency 64, IRQ 20
I/O ports at 5000 [size=256]
Memory at d1100000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too

------- lsmod --------
Module Size Used by
rfcomm 33233 0
l2cap 21953 9 rfcomm
bluetooth 48165 4 rfcomm,l2cap
fuse 41301 1
sunrpc 149212 3
nf_conntrack_ipv4 11589 2
ipt_REJECT 7361 2
iptable_filter 6337 1
ip_tables 14084 1 iptable_filter
nf_conntrack_ipv6 16329 2
xt_state 5953 4
nf_conntrack 51713 3 nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
xt_tcpudp 6849 8
ip6t_ipv6header 6081 2
ip6t_REJECT 8001 2
ip6table_filter 6209 1
ip6_tables 14981 2 ip6t_ipv6header,ip6table_filter
x_tables 14149 7
ipt_REJECT,ip_tables,xt_state,xt_tcpudp,ip6t_ipv6h eader,ip6t_REJECT,ip6_tables

dm_mirror 21569 0
dm_multipath 18505 0
dm_mod 49029 2 dm_mirror,dm_multipath
ipv6 228357 14 nf_conntrack_ipv6,ip6t_REJECT
snd_hda_intel 297441 8
snd_seq_dummy 6725 0
sr_mod 17381 0
cdrom 33761 1 sr_mod
snd_seq_oss 31553 0
snd_seq_midi_event 9665 1 snd_seq_oss
snd_seq 48945 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 10317 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 44353 0
snd_mixer_oss 17217 2 snd_pcm_oss
snd_pcm 70981 4 snd_hda_intel,snd_pcm_oss
8139cp 21441 0
snd_timer 21317 2 snd_seq,snd_pcm
8139too 24513 0
snd_page_alloc 11593 2 snd_hda_intel,snd_pcm
mii 8257 2 8139cp,8139too
snd_hwdep 10693 1 snd_hda_intel
arc4 5825 2
snd 48453 22
snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,sn d_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd _timer,snd_hwdep

soundcore 9505 2 snd
ecb 6593 2
blkcipher 9285 1 ecb
joydev 12545 0
serio_raw 8901 0
i2c_viapro 10965 0
pcspkr 6465 0
i2c_core 21057 1 i2c_viapro
video 20177 0
output 6721 1 video
uvcvideo 49349 0
rtl8187 36289 0
compat_ioctl32 5185 1 uvcvideo
mac80211 190389 1 rtl8187
videodev 27713 1 uvcvideo
v4l1_compat 15813 2 uvcvideo,videodev
eeprom_93cx6 5953 1 rtl8187
battery 12997 0
ac 8005 0
v4l2_common 18497 2 uvcvideo,videodev
button 10321 0
cfg80211 26441 2 rtl8187,mac80211
usb_storage 77057 0
sg 32209 0
pata_acpi 8641 0
pata_via 12357 3
ata_generic 8901 0
libata 128817 3 pata_acpi,pata_via,ata_generic
sd_mod 26817 4
scsi_mod 123725 5 sr_mod,usb_storage,sg,libata,sd_mod
ext3 112457 2
jbd 40789 1 ext3
mbcache 10177 1 ext3
uhci_hcd 23761 0
ohci_hcd 22725 0
ehci_hcd 32333 0

------- /etc/modprobe.conf --------
alias eth0 8139too
#alias snd-card-0 snd-via82xx
#options snd-card-0 index=0
#options snd-via82xx index=0
#remove snd-hda-intel { /usr/sbin/alsactl store 0 >/dev/null #2>&1 || :
; }; /sbin/modprobe -r --ignore-remove snd-hda-intel

options snd cards_limit=8
alias snd-card-0 snd-hda-intel
options snd-hda-intel index=0
alias snd-card-7 snd-usb-audio
options snd-usb-audio index=7

------- /etc/asound.conf --------
#Generated by system-config-soundcard
#If you edit this file, don't run system-config-soundcard,
#all your changes here could be lost.
#SWCONF
#DEV 0
defaults.pcm.card 0
defaults.pcm.device 0
defaults.ctl.card 0

------- aplay -l --------
**** List of PLAYBACK Hardware Devices ****
card 0: VT82xx [HDA VIA VT82xx], device 0: VT1708 Analog [VT1708 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0

------- amixer --------


------- /proc/asound/version --------
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20
19:16:42 2007 UTC).


------- rpm -q alsa-lib --------
alsa-lib-1.0.15-1.fc8

------- rpm -q alsa-utils --------
alsa-utils-1.0.15-1.fc8

------- /proc/asound/modules --------
0 snd_hda_intel

------- /proc/asound/pcm --------
00-00: VT1708 Analog : VT1708 Analog : playback 1 : capture 2

------- /etc/sysconfig/hwconf --------
-
class: OTHER
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700 Host Bridge"
vendorId: 1106
deviceId: 0324
subVendorId: 1106
subDeviceId: 0324
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 0
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700 Host Bridge"
vendorId: 1106
deviceId: 1324
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 0
pcifn: 1
-
class: OTHER
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700 Host Bridge"
vendorId: 1106
deviceId: 2324
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 0
pcifn: 2
-
class: OTHER
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700 Host Bridge"
vendorId: 1106
deviceId: 3324
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 0
pcifn: 3
-
class: OTHER
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700 Host Bridge"
vendorId: 1106
deviceId: 4324
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 0
pcifn: 4
-
class: OTHER
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700 Host Bridge"
vendorId: 1106
deviceId: 7324
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 0
pcifn: 7
-
class: OTHER
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. VT8237 PCI Bridge"
vendorId: 1106
deviceId: b198
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 1
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
driver: i2c-viapro
desc: "VIA Technologies, Inc. CX700 PCI to ISA Bridge"
vendorId: 1106
deviceId: 8324
subVendorId: 1509
subDeviceId: 2f07
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 11
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700 Internal Module Bus"
vendorId: 1106
deviceId: 324e
subVendorId: 1106
subDeviceId: 324e
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 11
pcifn: 7
-
class: OTHER
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700 Host Bridge"
vendorId: 1106
deviceId: 324b
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 13
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700 PCI to PCI Bridge"
vendorId: 1106
deviceId: 324a
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 13
pcifn: 1
-
class: OTHER
bus: PSAUX
detached: 0
desc: "Lid Switch"
-
class: OTHER
bus: USB
detached: 0
desc: "Linux 2.6.24.3-34.fc8 ehci_hcd EHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 1
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.24.3-34.fc8 ehci_hcd
usbprod: EHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
desc: "Linux 2.6.24.3-34.fc8 uhci_hcd UHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 4
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.24.3-34.fc8 uhci_hcd
usbprod: UHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
desc: "Linux 2.6.24.3-34.fc8 uhci_hcd UHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 3
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.24.3-34.fc8 uhci_hcd
usbprod: UHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
desc: "Linux 2.6.24.3-34.fc8 uhci_hcd UHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 2
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.24.3-34.fc8 uhci_hcd
usbprod: UHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
driver: rtl8187
desc: "Manufacturer_Realtek_RTL8187_ RTL8187_Wireless"
usbclass: 0
usbsubclass: 0
usbprotocol: 0
usbbus: 1
usblevel: 1
usbport: 3
usbdev: 4
vendorId: 0bda
deviceId: 8187
usbmfr: Manufacturer_Realtek_RTL8187_
usbprod: RTL8187_Wireless
-
class: OTHER
bus: PSAUX
detached: 0
driver: pcspkr
desc: "PC Speaker"
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0200"
deviceId: PNP0200
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0303"
deviceId: PNP0303
compat: PNP0320
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0800"
deviceId: PNP0800
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0a03"
deviceId: PNP0a03
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0b00"
deviceId: PNP0b00
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0c01"
deviceId: PNP0c01
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0c02"
deviceId: PNP0c02
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0c04"
deviceId: PNP0c04
-
class: OTHER
bus: PSAUX
detached: 0
desc: "Power Button (CM)"
-
class: OTHER
bus: PSAUX
detached: 0
desc: "Power Button (FF)"
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "SYN0d05"
deviceId: SYN0d05
compat: SYN0d00,SYN0002,PNP0f13
-
class: OTHER
bus: USB
detached: 0
desc: "USB2.0 Camera"
usbclass: 14
usbsubclass: 2
usbprotocol: 0
usbbus: 1
usblevel: 1
usbport: 4
usbdev: 5
vendorId: 5986
deviceId: 0101
usbprod: USB2.0 Camera
-
class: OTHER
bus: USB
detached: 0
driver: uvcvideo
desc: "USB2.0 Camera"
usbclass: 14
usbsubclass: 1
usbprotocol: 0
usbbus: 1
usblevel: 1
usbport: 4
usbdev: 5
vendorId: 5986
deviceId: 0101
usbprod: USB2.0 Camera
-
class: OTHER
bus: PSAUX
detached: 0
desc: "Video Bus"
-
class: MOUSE
bus: USB
detached: 0
device: input/mice
driver: genericwheelusb
desc: "Logitech Trackball"
usbclass: 3
usbsubclass: 1
usbprotocol: 2
usbbus: 2
usblevel: 1
usbport: 1
usbdev: 2
vendorId: 046d
deviceId: c404
usbmfr: Logitech
usbprod: Trackball
-
class: MOUSE
bus: PSAUX
detached: 0
device: input/mice
driver: generic3ps/2
desc: "Macintosh mouse button emulation"
-
class: MOUSE
bus: PSAUX
detached: 0
device: input/mice
driver: synaptics
desc: "SynPS/2 Synaptics TouchPad"
-
class: AUDIO
bus: PCI
detached: 0
driver: snd-hda-intel
desc: "VIA Technologies, Inc. VIA High Definition Audio Controller"
vendorId: 1106
deviceId: 3288
subVendorId: 1509
subDeviceId: 2f07
pciType: 1
pcidom: 0
pcibus: 2
pcidev: 1
pcifn: 0
-
class: CDROM
bus: SCSI
detached: 0
device: scd0
desc: "HL-DT-ST DVDRAM GSA-H10N"
host: 2
id: 0
channel: 0
lun: 0
-
class: VIDEO
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700M2 UniChrome PRO II Graphics"
vendorId: 1106
deviceId: 3157
subVendorId: 1509
subDeviceId: 2f07
pciType: 1
pcidom: 0
pcibus: 1
pcidev: 0
pcifn: 0
-
class: HD
bus: USB
detached: 0
driver: usb-storage
desc: "Generic USB2.0-CRW"
usbclass: 8
usbsubclass: 6
usbprotocol: 80
usbbus: 1
usblevel: 1
usbport: 5
usbdev: 6
vendorId: 0bda
deviceId: 0158
usbmfr: Generic
usbprod: USB2.0-CRW
-
class: HD
bus: USB
detached: 0
driver: usb-storage
desc: "USB TO IDE"
usbclass: 8
usbsubclass: 6
usbprotocol: 80
usbbus: 1
usblevel: 1
usbport: 0
usbdev: 2
vendorId: 05e3
deviceId: 0701
usbprod: USB TO IDE
-
class: HD
bus: SCSI
detached: 0
device: sda
desc: "ATA ST730212DE"
host: 1
id: 0
channel: 0
lun: 0
-
class: HD
bus: SCSI
detached: 0
device: sdb
desc: "Generic- Multi-Card"
host: 3
id: 0
channel: 0
lun: 0
-
class: KEYBOARD
bus: PSAUX
detached: 0
desc: "AT Translated Set 2 keyboard"
-
class: USB
bus: PCI
detached: 0
driver: uhci-hcd
desc: "VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller"
vendorId: 1106
deviceId: 3038
subVendorId: 1509
subDeviceId: 2f07
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 10
pcifn: 0
-
class: USB
bus: PCI
detached: 0
driver: uhci-hcd
desc: "VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller"
vendorId: 1106
deviceId: 3038
subVendorId: 1509
subDeviceId: 2f07
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 10
pcifn: 1
-
class: USB
bus: PCI
detached: 0
driver: uhci-hcd
desc: "VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller"
vendorId: 1106
deviceId: 3038
subVendorId: 1509
subDeviceId: 2f07
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 10
pcifn: 2
-
class: USB
bus: PCI
detached: 0
driver: ehci-hcd
desc: "VIA Technologies, Inc. USB 2.0"
vendorId: 1106
deviceId: 3104
subVendorId: 1509
subDeviceId: 2f07
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 10
pcifn: 4
-
class: IDE
bus: PCI
detached: 0
driver: pata_via
desc: "VIA Technologies, Inc. Unknown device 0581"
vendorId: 1106
deviceId: 0581
subVendorId: 1509
subDeviceId: 2f07
pciType: 1
pcidom: 0
pcibus: 0
pcidev: f
pcifn: 0

------- dmesg --------
Initializing cgroup subsys cpuset
Linux version 2.6.24.3-34.fc8 (mockbuild@xenbuilder1.fedora.redhat.com)
(gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Mar 12
18:17:20 EDT 2008

BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bee0000 (usable)
BIOS-e820: 000000001bee0000 - 000000001beea000 (ACPI data)
BIOS-e820: 000000001beea000 - 000000001bf00000 (ACPI NVS)
BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
446MB LOWMEM available.
found SMP MP-table at 000f84b0
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 114400) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 114400
HighMem 114400 -> 114400
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 114400
On node 0 totalpages: 114400
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 861 pages used for memmap
Normal zone: 109443 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI present.
Using APIC driver default
ACPI: RSDP 000F8470, 0014 (r0 PTLTD )
ACPI: RSDT 1BEE5663, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1BEE9A46, 0074 (r1 CX700 PTLTW 6040000 PTL_ F4240)
ACPI: DSDT 1BEE5697, 43AF (r1 VIA PTL_ACPI 6040000 MSFT 100000E)
ACPI: FACS 1BEEAFC0, 0040
ACPI: SSDT 1BEE9ABA, 04BA (r1 PPmmRe PPm 6040000 INTL 20030224)
ACPI: APIC 1BEE9F74, 0050 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: MCFG 1BEE9FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000e8000
swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113507
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07ba000 soft=c079a000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 600.016 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 445468k/457600k available (2237k kernel code, 11520k reserved,
1132k data, 284k init, 0k highmem)

virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
lowmem : 0xc0000000 - 0xdbee0000 ( 446 MB)
.init : 0xc0750000 - 0xc0797000 ( 284 kB)
.data : 0xc062f699 - 0xc074a724 (1132 kB)
.text : 0xc0400000 - 0xc062f699 (2237 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1200.92 BogoMIPS
(lpj=600463)

Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: a7c9bbff 00100000 00000000 00000000
00004181 00000000 00000000 00000000

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
CPU: After all inits, caps: 27c9b3ff 00100000 00000000 00000000 00004181
0000ffcc 00000000 00000000

Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
CPU0: Centaur VIA C7-M Processor 1200MHz stepping 00
Total of 1 processors activated (1200.92 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1680 bytes
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
Time: 17:12:19 Date: 03/19/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: BIOS BUG #81[00000000] found
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10,
disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11,
disabled.

ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *0, disabled.
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PFN1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report

NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
system 00:05: iomem range 0x0-0x9ffff could not be reserved
system 00:05: iomem range 0xe0000-0xfffff could not be reserved
system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:05: iomem range 0xffee0000-0xffefffff has been reserved
system 00:05: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:05: iomem range 0xfee00000-0xfee0ffff could not be reserved
system 00:05: iomem range 0xe0208000-0xe0208fff could not be reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0xfe10-0xfe11 has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:06: ioport range 0x4000-0x407f has been reserved
system 00:06: ioport range 0x4100-0x411f has been reserved
PCI: Failed to allocate mem resource #6:10000@c0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: d0000000-d0ffffff
PREFETCH window: a0000000-bfffffff
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: d1000000-d10fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: 5000-5fff
MEM window: d1100000-d11fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs...<7>Switched to high resolution mode on
CPU 0

it is
Freeing initrd memory: 2978k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1205946740.558:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 38B9E4E53D868C9E
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
Boot video device is 0000:01:00.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN0] (on)
ACPI: Fan [FAN1] (on)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 16 throttling states)
ACPI: Thermal Zone [THRM] (32 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected VIA CX700 chipset
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1

cpuidle: using governor ladder
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04750/0x200000
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input2

cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 0:380:239
Freeing unused kernel memory: 284k freed
Write protecting the kernel read-only data: 893k
Marking TSC unstable due to: TSC halts in idle.
Time: acpi_pm clocksource has been installed.
ACPI: PCI Interrupt 0000:00:10.4[D] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:10.4 to 64
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 16, io mem 0xd1400000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:10.0 to 64
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 17, io base 0x00004400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[b] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:10.1 to 64
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 18, io base 0x00004420
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:10.2 to 64
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 19, io base 0x00004440
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
usb 1-4: new high speed USB device using ehci_hcd and address 4
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
usb 1-4: configuration #1 chosen from 1 choice
libata version 3.00 loaded.
pata_via 0000:00:0f.0: version 0.3.3
PCI: Setting latency timer of device 0000:00:0f.0 to 64
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4460 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4468 irq 15
ata1: port disabled. ignoring.
usb 1-5: new high speed USB device using ehci_hcd and address 5
ata2.00: ATA-7: ST730212DE, 3.01, max UDMA/66
ata2.00: 58605120 sectors, multi 16: LBA48
ata2.00: limited to UDMA/33 due to 40-wire cable
ata2.00: configured for UDMA/33
scsi 1:0:0:0: Direct-Access ATA ST730212DE 3.01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA

sd 1:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA

sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-5: configuration #1 chosen from 1 choice
usb 1-6: new high speed USB device using ehci_hcd and address 6
usb 1-6: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
input: Logitech Trackball as
/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input3
input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on
usb-0000:00:10.0-2

kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1205946755.566:2): enforcing=1 old_enforcing=0 auid=4294967295
SELinux:8192 avtab hash slots allocated.Num of rules:217677
SELinux:8192 avtab hash slots allocated.Num of rules:217677
security: 8 users, 12 roles, 2372 types, 114 bools, 1 sens, 1024 cats
security: 67 classes, 217677 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
genfs_contexts

SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
audit(1205946757.073:3): policy loaded auid=4294967295
Clocksource tsc unstable (delta = -193424471 ns)
sd 1:0:0:0: Attached scsi generic sg0 type 0
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
input: Power Button (FF) as /devices/virtual/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input5
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/virtual/input/input6
ACPI: Lid Switch [LID]
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ACPI: AC Adapter [ACAD] (on-line)
scsi3 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
ACPI: Battery Slot [BAT0] (battery present)
Linux video capture interface: v2.00
phy0: Selected rate control algorithm 'pid'
input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:14/LNXVIDEO:00/input/input7

ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
usb-storage: device scan complete
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0
ANSI: 0 CCS

sd 3:0:0:0: [sdb] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg2 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input8
phy0: hwaddr 00:15:af:41:ad:f1, rtl8187 V1 + rtl8225z2
usbcore: registered new interface driver rtl8187
uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0101)
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 16 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:03:09.0 to 64
eth0: RealTek RTL8139 at 0xdc83e000, 00:14:0b:3d:ba:97, IRQ 20
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:02:01.0 to 64
ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x1
ALSA sound/pci/hda/hda_codec.c:2757: autoconfig: line_outs=1
(0x1f/0x0/0x0/0x0/0x0)

ALSA sound/pci/hda/hda_codec.c:2761: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2765: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2773: inputs: mic=0x1d, fmic=0x21,
line=0x0, fline=0x0, cd=0x0, aux=0x0

usbcore: registered new interface driver snd-usb-audio
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised:
dm-devel@redhat.com

device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 across:1052248k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts

warning: process `kudzu' used the deprecated sysctl system call with 1.23.
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
audit(1205961235.551:4): audit_pid=1679 old=0 by auid=4294967295
subj=system_u:system_r:auditd_t:s0

Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:14:bf:ba:68:4b
wlan0: RX authentication from 00:14:bf:ba:68:4b (alg=0 transaction=2
status=0)

wlan0: authenticated
wlan0: associate with AP 00:14:bf:ba:68:4b
wlan0: RX AssocResp from 00:14:bf:ba:68:4b (capab=0x1 status=0 aid=3)
wlan0: associated
wlan0: switched to long barker preamble (BSSID=00:14:bf:ba:68:4b)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: disassociate(reason=3)
wlan0: no IPv6 routers present
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
hda-intel: Invalid position buffer, using LPIB read method instead.
uvcvideo: Failed to query (130) UVC control 1 (unit 0) : 2 (exp. 26).
printk: 1 messages suppressed.
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: RX non-WEP frame, but expected encryption
wlan0: Initial auth_alg=1
wlan0: authenticate with AP 00:0d:72:18:6b:91
wlan0: RX authentication from 00:0d:72:18:6b:91 (alg=1 transaction=2
status=0)

wlan0: replying to auth challenge
wlan0: RX authentication from 00:0d:72:18:6b:91 (alg=1 transaction=4
status=0)

wlan0: authenticated
wlan0: associate with AP 00:0d:72:18:6b:91
wlan0: associate with AP 00:0d:72:18:6b:91
wlan0: associate with AP 00:0d:72:18:6b:91
wlan0: association with AP 00:0d:72:18:6b:91 timed out
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:14:bf:ba:68:4b
wlan0: RX authentication from 00:14:bf:ba:68:4b (alg=0 transaction=2
status=0)

wlan0: authenticated
wlan0: associate with AP 00:14:bf:ba:68:4b
wlan0: RX AssocResp from 00:14:bf:ba:68:4b (capab=0x1 status=0 aid=3)
wlan0: associated
printk: 1 messages suppressed.
wlan0: switched to long barker preamble (BSSID=00:14:bf:ba:68:4b)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
warning: process `python2' used the deprecated sysctl system call with 1.23.
warning: process `python2' used the deprecated sysctl system call with 1.23.
warning: process `python2' used the deprecated sysctl system call with 1.23.
warning: process `python2' used the deprecated sysctl system call with 1.23.
usbcore: deregistering interface driver snd-usb-audio







--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
 
Old 03-19-2008, 10:16 PM
Nigel Henry
 
Default Via High Definition Audio Controller

On Wednesday 19 March 2008 23:55, Jim wrote:
> FC8-i386 KDE 2.6.24.3-34.fc8
> My Sound card in a laptop is a VIA Tech, "VIA High Definition Audio
> Controller" and all the drivers are loading but it has no sound.
> I have heard through the Grapvine that the PCM device VT1708 was broken
> in 2.6.24, any truth to that ?
> The Soundcard Detection debug files are listed below, scsrun.log and
> scsconfig.log.
> Who can read and understand these two files.
>
>
> scsrun.log
>
>
> ------- System Config Soundcard Log --------
> Wed Mar 19 17:27:52 EDT 2008
>
> aplay: main:546: audio open error: Device or resource busy
> *** PULSEAUDIO: Unable to connect: Connection refused
> amixer: Mixer attach default error: Connection refused
> *** PULSEAUDIO: Unable to connect: Connection refused
> amixer: Mixer attach default error: Connection refused
> ProbeCards, method = hal
> --------- Card 0 --------
> Active 1
> Vendor: VIA Technologies, Inc.
> Model: VIA High Definition Audio Controller
> Driver: snd-hda-intel
>
> Volume: 75
> Devices:
> [[0, ' VT1708 Analog ']]
> Test device 0

Hi Jim. As I'm totally obsessed by pulseaudio causing sound problems on F8,
I'd suggest removing the alsa-plugins-pulseaudio package, then see if the
sound works.

Just a shot in the dark, and maybe I've got pulseaudio on the brain, but other
folks have got their sounds up by removing that package.

Nigel.

--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
 
Old 03-19-2008, 11:28 PM
Jim
 
Default Via High Definition Audio Controller

Nigel Henry wrote:

On Wednesday 19 March 2008 23:55, Jim wrote:


FC8-i386 KDE 2.6.24.3-34.fc8
My Sound card in a laptop is a VIA Tech, "VIA High Definition Audio
Controller" and all the drivers are loading but it has no sound.
I have heard through the Grapvine that the PCM device VT1708 was broken
in 2.6.24, any truth to that ?
The Soundcard Detection debug files are listed below, scsrun.log and
scsconfig.log.
Who can read and understand these two files.


scsrun.log


------- System Config Soundcard Log --------
Wed Mar 19 17:27:52 EDT 2008

aplay: main:546: audio open error: Device or resource busy
*** PULSEAUDIO: Unable to connect: Connection refused
amixer: Mixer attach default error: Connection refused
*** PULSEAUDIO: Unable to connect: Connection refused
amixer: Mixer attach default error: Connection refused
ProbeCards, method = hal
--------- Card 0 --------
Active 1
Vendor: VIA Technologies, Inc.
Model: VIA High Definition Audio Controller
Driver: snd-hda-intel

Volume: 75
Devices:
[[0, ' VT1708 Analog ']]
Test device 0



Hi Jim. As I'm totally obsessed by pulseaudio causing sound problems on F8,
I'd suggest removing the alsa-plugins-pulseaudio package, then see if the
sound works.


Just a shot in the dark, and maybe I've got pulseaudio on the brain, but other
folks have got their sounds up by removing that package.


Nigel.



I deleted the alsa-plugins-pulseaudio package but that didn't help at all.
There is a check box in Soundcard Detection app that allows you to
disable the Alsa plugins.


Thanks for your help

--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
 
Old 03-20-2008, 11:57 AM
Aaron Konstam
 
Default Via High Definition Audio Controller

On Thu, 2008-03-20 at 00:16 +0100, Nigel Henry wrote:
> On Wednesday 19 March 2008 23:55, Jim wrote:
> > FC8-i386 KDE 2.6.24.3-34.fc8
> > My Sound card in a laptop is a VIA Tech, "VIA High Definition Audio
> > Controller" and all the drivers are loading but it has no sound.
> > I have heard through the Grapvine that the PCM device VT1708 was broken
> > in 2.6.24, any truth to that ?
> > The Soundcard Detection debug files are listed below, scsrun.log and
> > scsconfig.log.
> > Who can read and understand these two files.
> >
> >
> > scsrun.log
> >
> >
> > ------- System Config Soundcard Log --------
> > Wed Mar 19 17:27:52 EDT 2008
> >
> > aplay: main:546: audio open error: Device or resource busy
> > *** PULSEAUDIO: Unable to connect: Connection refused
> > amixer: Mixer attach default error: Connection refused
> > *** PULSEAUDIO: Unable to connect: Connection refused
> > amixer: Mixer attach default error: Connection refused
> > ProbeCards, method = hal
> > --------- Card 0 --------
> > Active 1
> > Vendor: VIA Technologies, Inc.
> > Model: VIA High Definition Audio Controller
> > Driver: snd-hda-intel
> >
> > Volume: 75
> > Devices:
> > [[0, ' VT1708 Analog ']]
> > Test device 0
>
> Hi Jim. As I'm totally obsessed by pulseaudio causing sound problems on F8,
> I'd suggest removing the alsa-plugins-pulseaudio package, then see if the
> sound works.
>
> Just a shot in the dark, and maybe I've got pulseaudio on the brain, but other
> folks have got their sounds up by removing that package.
>
> Nigel.
>
I second this sugestion.
--
================================================== =====================
The mome rath isn't born that could outgrabe me. -- Nicol Williamson
================================================== =====================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net

--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
 
Old 03-20-2008, 12:04 PM
Aaron Konstam
 
Default Via High Definition Audio Controller

On Wed, 2008-03-19 at 20:28 -0400, Jim wrote:
> Nigel Henry wrote:
> > On Wednesday 19 March 2008 23:55, Jim wrote:
> >
> >> FC8-i386 KDE 2.6.24.3-34.fc8
> >> My Sound card in a laptop is a VIA Tech, "VIA High Definition Audio
> >> Controller" and all the drivers are loading but it has no sound.
> >> I have heard through the Grapvine that the PCM device VT1708 was broken
> >> in 2.6.24, any truth to that ?
> >> The Soundcard Detection debug files are listed below, scsrun.log and
> >> scsconfig.log.
> >> Who can read and understand these two files.
> >>
> >>
> >> scsrun.log
> >>
> >>
> >> ------- System Config Soundcard Log --------
> >> Wed Mar 19 17:27:52 EDT 2008
> >>
> >> aplay: main:546: audio open error: Device or resource busy
> >> *** PULSEAUDIO: Unable to connect: Connection refused
> >> amixer: Mixer attach default error: Connection refused
> >> *** PULSEAUDIO: Unable to connect: Connection refused
> >> amixer: Mixer attach default error: Connection refused
> >> ProbeCards, method = hal
> >> --------- Card 0 --------
> >> Active 1
> >> Vendor: VIA Technologies, Inc.
> >> Model: VIA High Definition Audio Controller
> >> Driver: snd-hda-intel
> >>
> >> Volume: 75
> >> Devices:
> >> [[0, ' VT1708 Analog ']]
> >> Test device 0
> >>
> >
> > Hi Jim. As I'm totally obsessed by pulseaudio causing sound problems on F8,
> > I'd suggest removing the alsa-plugins-pulseaudio package, then see if the
> > sound works.
> >
> > Just a shot in the dark, and maybe I've got pulseaudio on the brain, but other
> > folks have got their sounds up by removing that package.
> >
> > Nigel.
> >
> >
> I deleted the alsa-plugins-pulseaudio package but that didn't help at all.
> There is a check box in Soundcard Detection app that allows you to
> disable the Alsa plugins.
>
> Thanks for your help
>
The check box is irrelevant in my opinion. But with the
alsa-plugins-pulseaudio rpm removed you should not get any pulseaudio
eroros. So what is happening now?
Is the card detected? Is the test sound heard?

There are many of us who have been through this sound failure problem.
Has alsamixer been run? And so on..
--
================================================== =====================
If the aborigine drafted an IQ test, all of Western civilization would
presumably flunk it. -- Stanley Garn
================================================== =====================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net

--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
 
Old 03-21-2008, 02:51 PM
Jim
 
Default Via High Definition Audio Controller

Aaron Konstam wrote:

On Thu, 2008-03-20 at 10:49 -0400, Jim wrote:


Aaron Konstam wrote:


On Wed, 2008-03-19 at 20:28 -0400, Jim wrote:



Nigel Henry wrote:



On Wednesday 19 March 2008 23:55, Jim wrote:




FC8-i386 KDE 2.6.24.3-34.fc8
My Sound card in a laptop is a VIA Tech, "VIA High Definition Audio
Controller" and all the drivers are loading but it has no sound.
I have heard through the Grapvine that the PCM device VT1708 was broken
in 2.6.24, any truth to that ?
The Soundcard Detection debug files are listed below, scsrun.log and
scsconfig.log.
Who can read and understand these two files.


scsrun.log


------- System Config Soundcard Log --------
Wed Mar 19 17:27:52 EDT 2008

aplay: main:546: audio open error: Device or resource busy
*** PULSEAUDIO: Unable to connect: Connection refused
amixer: Mixer attach default error: Connection refused
*** PULSEAUDIO: Unable to connect: Connection refused
amixer: Mixer attach default error: Connection refused
ProbeCards, method = hal
--------- Card 0 --------
Active 1
Vendor: VIA Technologies, Inc.
Model: VIA High Definition Audio Controller
Driver: snd-hda-intel

Volume: 75
Devices:
[[0, ' VT1708 Analog ']]
Test device 0



Hi Jim. As I'm totally obsessed by pulseaudio causing sound problems on F8,
I'd suggest removing the alsa-plugins-pulseaudio package, then see if the
sound works.


Just a shot in the dark, and maybe I've got pulseaudio on the brain, but other
folks have got their sounds up by removing that package.


Nigel.





I deleted the alsa-plugins-pulseaudio package but that didn't help at all.
There is a check box in Soundcard Detection app that allows you to
disable the Alsa plugins.


Thanks for your help




The check box is irrelevant in my opinion. But with the
alsa-plugins-pulseaudio rpm removed you should not get any pulseaudio
eroros. So what is happening now?
Is the card detected? Is the test sound heard?

There are many of us who have been through this sound failure problem.
Has alsamixer been run? And so on..
--

================================================== =====================
If the aborigine drafted an IQ test, all of Western civilization would
presumably flunk it. -- Stanley Garn
================================================== =====================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net



I did remove the alsa-plugins-pulseaudio and checked alsa-mixer, but to
no avail, rebooted box and sound still doesn't work.

sound does not work:



When you say sound does not work do you mean:
1. You sound card is not detected?
2. the test sound does not play, even when you specifically load driver
modules in the gui.

3. Does lsmod show the sound modules loaded?

--
================================================== =====================
You love peace.
================================================== =====================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net




snd_usb_audio 79681 0
snd_usb_lib 18241 1 snd_usb_audio
snd_rawmidi 22465 1 snd_usb_lib
snd_hda_intel 297441 2
snd_seq_dummy 6725 0
snd_seq_oss 31553 0
snd_seq_midi_event 9665 1 snd_seq_oss
snd_seq 48945 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 10317 4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 44353 0
snd_mixer_oss 17217 2 snd_pcm_oss
snd_pcm 70981 3 snd_usb_audio,snd_hda_intel,snd_pcm_oss
snd_timer 21317 2 snd_seq,snd_pcm
snd_page_alloc 11593 2 snd_hda_intel,snd_pcm
snd_hwdep 10693 2 snd_usb_audio,snd_hda_intel
snd 48453 15 snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_hda_inte l,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device ,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_h wdep
soundcore 9505 2 snd
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
 
Old 03-21-2008, 07:29 PM
"max bianco"
 
Default Via High Definition Audio Controller

2008/3/21 Jim <mickeyboa@sbcglobal.net>:

Aaron Konstam wrote:

> On Thu, 2008-03-20 at 10:49 -0400, Jim wrote:

>

>> Aaron Konstam wrote:

>>

>>> On Wed, 2008-03-19 at 20:28 -0400, Jim wrote:

>>>

>>>

>>>> Nigel Henry wrote:

>>>>

>>>>

>>>>> On Wednesday 19 March 2008 23:55, Jim wrote:

>>>>>

>>>>>

>>>>>

>>>>>> FC8-i386 *KDE *2.6.24.3-34.fc8

>>>>>> My Sound card in a laptop is a VIA Tech, "VIA High Definition Audio

>>>>>> Controller" and all the drivers are loading but it has no sound.

>>>>>> I have heard through the Grapvine that the PCM device VT1708 was broken

>>>>>> in 2.6.24, any truth to that ?

>>>>>> The Soundcard Detection debug files are listed below, * scsrun.log and

>>>>>> scsconfig.log.

>>>>>> Who can read and understand these two files.

>>>>>>

>>>>>>

>>>>>> * * * * * * * * * * * * * * * * * * * * * * * * * * * * scsrun.log

>>>>>>

>>>>>>

>>>>>> ------- System Config Soundcard Log --------

>>>>>> Wed Mar 19 17:27:52 EDT 2008

>>>>>>

>>>>>> aplay: main:546: audio open error: Device or resource busy

>>>>>> *** PULSEAUDIO: Unable to connect: Connection refused

>>>>>> amixer: Mixer attach default error: Connection refused

>>>>>> *** PULSEAUDIO: Unable to connect: Connection refused

>>>>>> amixer: Mixer attach default error: Connection refused

>>>>>> ProbeCards, method = *hal

>>>>>> --------- Card 0 --------

>>>>>> Active 1

>>>>>> Vendor: VIA Technologies, Inc.

>>>>>> Model: VIA High Definition Audio Controller

>>>>>> Driver: snd-hda-intel

>>>>>>

>>>>>> Volume: 75

>>>>>> Devices:

>>>>>> [[0, ' VT1708 Analog ']]

>>>>>> Test device 0

>>>>>>

>>>>>>

>>>>>>

>>>>> Hi Jim. As I'm totally obsessed by pulseaudio causing sound problems on F8,

>>>>> I'd suggest removing the alsa-plugins-pulseaudio package, then see if the

>>>>> sound works.

>>>>>

>>>>> Just a shot in the dark, and maybe I've got pulseaudio on the brain, but other

>>>>> folks have got their sounds up by removing that package.

>>>>>

>>>>> Nigel.

>>>>>

>>>>>

>>>>>

>>>>>

>>>> I deleted the alsa-plugins-pulseaudio package but that didn't help at all.

>>>> There is a check box in Soundcard Detection app that allows you to

>>>> disable the Alsa plugins.

>>>>

>>>> Thanks for your help

>>>>

>>>>

>>>>

>>> The check box is irrelevant in my opinion. But with the

>>> alsa-plugins-pulseaudio rpm removed you should not get any pulseaudio

>>> eroros. So what is happening now?

>>> Is the card detected? Is the test sound heard?

>>>

>>> There are many of us who have been through this sound failure problem.

>>> Has alsamixer been run? And so on..

>>> --

>>> ================================================== =====================

>>> If the aborigine drafted an IQ test, all of Western civilization would

>>> presumably flunk it. -- Stanley Garn

>>> ================================================== =====================

>>> Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net

>>>

>>>

>>>

>> I did remove the alsa-plugins-pulseaudio and checked alsa-mixer, but to

>> no avail, rebooted box and sound still doesn't work.

>> sound does not work:

>>

>

> When you say sound does not work do you mean:

> 1. You sound card is not detected?

> 2. the test sound does not play, even when you specifically load driver

> modules in the gui.

>

> 3. Does lsmod show the sound modules loaded?

>

> --

> ================================================== =====================

> You love peace.

> ================================================== =====================

> Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net

>

>




snd_usb_audio * * * * *79681 *0

snd_usb_lib * * * * * *18241 *1 snd_usb_audio

snd_rawmidi * * * * * *22465 *1 snd_usb_lib

snd_hda_intel * * * * 297441 *2

snd_seq_dummy * * * * * 6725 *0

snd_seq_oss * * * * * *31553 *0

snd_seq_midi_event * * *9665 *1 snd_seq_oss

snd_seq * * * * * * * *48945 *5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event

snd_seq_device * * * * 10317 *4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq

snd_pcm_oss * * * * * *44353 *0

snd_mixer_oss * * * * *17217 *2 snd_pcm_oss

snd_pcm * * * * * * * *70981 *3 snd_usb_audio,snd_hda_intel,snd_pcm_oss

snd_timer * * * * * * *21317 *2 snd_seq,snd_pcm

snd_page_alloc * * * * 11593 *2 snd_hda_intel,snd_pcm

snd_hwdep * * * * * * *10693 *2 snd_usb_audio,snd_hda_intel

snd * * * * * * * * * *48453 *15 snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_hda_inte l,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device ,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_h wdep

soundcore * * * * * * * 9505 *2 snd


--

fedora-list mailing list

fedora-list@redhat.com

To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Check your services. I say that alot , i know, but updates or something has gotten me twice now looking for complex solutions when starting or restarting a service like Console Kit* would have saved me a bunch of time and effort. Some people don't reboot and in my case the service was disabled, so a reboot didn't solve it till i went and manually restarted.


Max

Max

--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
 
Old 03-21-2008, 09:18 PM
Jim
 
Default Via High Definition Audio Controller

Aaron Konstam wrote:

On Thu, 2008-03-20 at 10:49 -0400, Jim wrote:


Aaron Konstam wrote:


On Wed, 2008-03-19 at 20:28 -0400, Jim wrote:



Nigel Henry wrote:



On Wednesday 19 March 2008 23:55, Jim wrote:




FC8-i386 KDE 2.6.24.3-34.fc8
My Sound card in a laptop is a VIA Tech, "VIA High Definition Audio
Controller" and all the drivers are loading but it has no sound.
I have heard through the Grapvine that the PCM device VT1708 was broken
in 2.6.24, any truth to that ?
The Soundcard Detection debug files are listed below, scsrun.log and
scsconfig.log.
Who can read and understand these two files.


scsrun.log


------- System Config Soundcard Log --------
Wed Mar 19 17:27:52 EDT 2008

aplay: main:546: audio open error: Device or resource busy
*** PULSEAUDIO: Unable to connect: Connection refused
amixer: Mixer attach default error: Connection refused
*** PULSEAUDIO: Unable to connect: Connection refused
amixer: Mixer attach default error: Connection refused
ProbeCards, method = hal
--------- Card 0 --------
Active 1
Vendor: VIA Technologies, Inc.
Model: VIA High Definition Audio Controller
Driver: snd-hda-intel

Volume: 75
Devices:
[[0, ' VT1708 Analog ']]
Test device 0



Hi Jim. As I'm totally obsessed by pulseaudio causing sound problems on F8,
I'd suggest removing the alsa-plugins-pulseaudio package, then see if the
sound works.


Just a shot in the dark, and maybe I've got pulseaudio on the brain, but other
folks have got their sounds up by removing that package.


Nigel.





I deleted the alsa-plugins-pulseaudio package but that didn't help at all.
There is a check box in Soundcard Detection app that allows you to
disable the Alsa plugins.


Thanks for your help




The check box is irrelevant in my opinion. But with the
alsa-plugins-pulseaudio rpm removed you should not get any pulseaudio
eroros. So what is happening now?
Is the card detected? Is the test sound heard?

There are many of us who have been through this sound failure problem.
Has alsamixer been run? And so on..
--

================================================== =====================
If the aborigine drafted an IQ test, all of Western civilization would
presumably flunk it. -- Stanley Garn
================================================== =====================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net



I did remove the alsa-plugins-pulseaudio and checked alsa-mixer, but to
no avail, rebooted box and sound still doesn't work.

sound does not work:



When you say sound does not work do you mean:
1. You sound card is not detected?
2. the test sound does not play, even when you specifically load driver
modules in the gui.

3. Does lsmod show the sound modules loaded?

--
================================================== =====================
You love peace.
================================================== =====================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net


I fed these two commands in and I seem to missing something, Does anyone
know what ?
[jim@localhost ~]$ iecset
control "IEC958 Playback Default" not found
[jim@localhost ~]$ iecset audio on
control "IEC958 Playback Default" not found

--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
 

Thread Tools




All times are GMT. The time now is 09:31 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org