FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Fedora User

 
 
LinkBack Thread Tools
 
Old 04-10-2011, 09:59 PM
Gregory Machin
 
Default upgrade fc 13 to 14 broke dual display

Hi.

I did the upgrade from fc 13 to fc 14, on my Dell Latitude E6500, with
docking station that has dual display attached. Since the upgrade the
dual displays , don't display the gui. Startup gets to the end and
hangs where it should return the gui login. Some thing to note is that
during boot (if you don't push escape) the normal boot progress screen
displays on both of the attached monitors then goes black with a
flashing cursor in the right hand display . If I remove the laptop
from the docking station it works fine. I tried putting my other
laptop on the docking station (same make model etc) and got the same
results. So this is not limited to one machine. Both machines are
upgrades from fc 13.

Any suggestions ..

Thanks
G
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 
Old 04-11-2011, 10:49 AM
David Timms
 
Default upgrade fc 13 to 14 broke dual display

On 11/04/11 07:59, Gregory Machin wrote:
> results. So this is not limited to one machine. Both machines are
> upgrades from fc 13.

Could you try the F14 live CD, to see if the problem occurs with that ?

Could you make space and do an install to a new partition, to see if
that has a problem ?

Are you using binary graphics drivers from nvidia or ati ?
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 
Old 04-12-2011, 12:24 AM
Gregory Machin
 
Default upgrade fc 13 to 14 broke dual display

I'll download the Live CD and give it a go.

No funny drivers, all out the box fedora drivers. I'm not into playing
the the gui stuff so I don't make changes past setting resolution and
default display.

As an after thought the output in the Xorg.1.log :

[ 57.855]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[ 57.855] X Protocol Version 11, Revision 0
[ 57.855] Build Operating System: x86-16 2.6.32-71.14.1.el6.x86_64
[ 57.855] Current Operating System: Linux topnz15209-linux
2.6.35.12-88.fc14.x86_64 #1 SMP Thu Mar 31 21:21:57 UTC 2011 x86_64
[ 57.855] Kernel command line: ro root=/dev/mapper/VolGroup-lv_root
rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS
rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16
KEYTABLE=us rhgb quiet
[ 57.855] Build Date: 18 March 2011 12:22:54AM
[ 57.855] Build ID: xorg-x11-server 1.9.5-1.fc14
[ 57.855] Current version of pixman: 0.18.4
[ 57.855] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 57.855] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 57.855] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Apr 12
23:52:13 2011
[ 57.856] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 57.856] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 57.856] (==) No Layout section. Using the first Screen section.
[ 57.856] (==) No screen section available. Using defaults.
[ 57.856] (**) |-->Screen "Default Screen Section" (0)
[ 57.856] (**) | |-->Monitor "<default monitor>"
[ 57.856] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 57.856] (==) Automatically adding devices
[ 57.856] (==) Automatically enabling devices
[ 57.856] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 57.856] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 57.856] (II) The server relies on udev to provide the list of
input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 57.856] (II)
************************************************** *************
************************************************** *************
** Fedora switched to udev-based device detection with **
** xorg-x11-server-1.7.99.901-1. Custom HAL configuration **
** stored in /etc/hal/fdi/policy will not be seen by this **
** server version. If you have such configuration you will **
** need to update it to the new format. **
** For more information, see the Fedora wiki page **
** https://fedoraproject.org/wiki/Input_device_configuration **
************************************************** *************
************************************************** *************
[ 57.856] (II) Loader magic: 0x7d32c0
[ 57.856] (II) Module ABI versions:
[ 57.856] X.Org ANSI C Emulation: 0.4
[ 57.856] X.Org Video Driver: 8.0
[ 57.856] X.Org XInput driver : 11.0
[ 57.856] X.Org Server Extension : 4.0
[ 57.858] (--) PCI:*(0:0:2:0) 8086:2a42:1028:024f rev 7, Mem @
0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000ef98/8, BIOS @
0x????????/131072
[ 57.858] (--) PCI: (0:0:2:1) 8086:2a43:1028:024f rev 7, Mem @
0xf6b00000/1048576, BIOS @ 0x????????/65536
[ 57.858] (II) LoadModule: "extmod"
[ 57.859] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 57.859] (II) Module extmod: vendor="X.Org Foundation"
[ 57.859] compiled for 1.9.5, module version = 1.0.0
[ 57.859] Module class: X.Org Server Extension
[ 57.859] ABI class: X.Org Server Extension, version 4.0
[ 57.859] (II) Loading extension SELinux
[ 57.859] (II) Loading extension MIT-SCREEN-SAVER
[ 57.859] (II) Loading extension XFree86-VidModeExtension
[ 57.859] (II) Loading extension XFree86-DGA
[ 57.859] (II) Loading extension DPMS
[ 57.859] (II) Loading extension XVideo
[ 57.859] (II) Loading extension XVideo-MotionCompensation
[ 57.859] (II) Loading extension X-Resource
[ 57.859] (II) LoadModule: "dbe"
[ 57.860] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 57.860] (II) Module dbe: vendor="X.Org Foundation"
[ 57.860] compiled for 1.9.5, module version = 1.0.0
[ 57.860] Module class: X.Org Server Extension
[ 57.860] ABI class: X.Org Server Extension, version 4.0
[ 57.860] (II) Loading extension DOUBLE-BUFFER
[ 57.860] (II) LoadModule: "glx"
[ 57.860] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 57.860] (II) Module glx: vendor="X.Org Foundation"
[ 57.860] compiled for 1.9.5, module version = 1.0.0
[ 57.860] ABI class: X.Org Server Extension, version 4.0
[ 57.860] (==) AIGLX enabled
[ 57.860] (II) Loading extension GLX
[ 57.860] (II) LoadModule: "record"
[ 57.861] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 57.861] (II) Module record: vendor="X.Org Foundation"
[ 57.861] compiled for 1.9.5, module version = 1.13.0
[ 57.861] Module class: X.Org Server Extension
[ 57.861] ABI class: X.Org Server Extension, version 4.0
[ 57.861] (II) Loading extension RECORD
[ 57.861] (II) LoadModule: "dri"
[ 57.861] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 57.862] (II) Module dri: vendor="X.Org Foundation"
[ 57.862] compiled for 1.9.5, module version = 1.0.0
[ 57.862] ABI class: X.Org Server Extension, version 4.0
[ 57.862] (II) Loading extension XFree86-DRI
[ 57.862] (II) LoadModule: "dri2"
[ 57.862] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 57.862] (II) Module dri2: vendor="X.Org Foundation"
[ 57.862] compiled for 1.9.5, module version = 1.2.0
[ 57.863] ABI class: X.Org Server Extension, version 4.0
[ 57.863] (II) Loading extension DRI2
[ 57.863] (==) Matched intel as autoconfigured driver 0
[ 57.863] (==) Matched vesa as autoconfigured driver 1
[ 57.863] (==) Matched fbdev as autoconfigured driver 2
[ 57.863] (==) Assigned the driver to the xf86ConfigLayout
[ 57.863] (II) LoadModule: "intel"
[ 57.863] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 57.863] (II) Module intel: vendor="X.Org Foundation"
[ 57.863] compiled for 1.9.0, module version = 2.12.0
[ 57.863] Module class: X.Org Video Driver
[ 57.863] ABI class: X.Org Video Driver, version 8.0
[ 57.863] (II) LoadModule: "vesa"
[ 57.863] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 57.863] (II) Module vesa: vendor="X.Org Foundation"
[ 57.863] compiled for 1.8.99.904, module version = 2.3.0
[ 57.863] Module class: X.Org Video Driver
[ 57.863] ABI class: X.Org Video Driver, version 8.0
[ 57.863] (II) LoadModule: "fbdev"
[ 57.864] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 57.864] (II) Module fbdev: vendor="X.Org Foundation"
[ 57.864] compiled for 1.8.99.904, module version = 0.4.1
[ 57.864] ABI class: X.Org Video Driver, version 8.0
[ 57.864] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 57.864] (II) VESA: driver for VESA chipsets: vesa
[ 57.864] (II) FBDEV: driver for framebuffer: fbdev
[ 57.864] (--) using VT number 7

[ 57.867] (WW) Falling back to old probe method for vesa
[ 57.867] (WW) Falling back to old probe method for fbdev
[ 57.867] (II) Loading sub module "fbdevhw"
[ 57.867] (II) LoadModule: "fbdevhw"
[ 57.868] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 57.868] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 57.868] compiled for 1.9.5, module version = 0.0.2
[ 57.868] ABI class: X.Org Video Driver, version 8.0
[ 57.869] drmOpenDevice: node name is /dev/dri/card0
[ 57.870] drmOpenDevice: open result is 8, (OK)
[ 57.870] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 57.870] drmOpenDevice: node name is /dev/dri/card0
[ 57.870] drmOpenDevice: open result is 8, (OK)
[ 57.870] drmOpenByBusid: drmOpenMinor returns 8
[ 57.870] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 57.870] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 57.870] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 57.870] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 57.870] (==) intel(0): RGB weight 888
[ 57.870] (==) intel(0): Default visual is TrueColor
[ 57.870] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 57.870] (--) intel(0): Chipset: "GM45"
[ 57.870] (==) intel(0): video overlay key set to 0x101fe
[ 58.196] (II) intel(0): Output LVDS1 has no monitor section
[ 58.196] (II) intel(0): found backlight control interface
/sys/class/backlight/acpi_video0
[ 58.536] (II) intel(0): Output VGA1 has no monitor section
[ 58.747] (II) intel(0): Output HDMI1 has no monitor section
[ 58.748] (II) intel(0): Output DP1 has no monitor section
[ 58.757] (II) intel(0): Output HDMI2 has no monitor section
[ 58.757] (II) intel(0): Output DP2 has no monitor section
[ 58.758] (II) intel(0): Output DP3 has no monitor section
[ 58.758] (II) intel(0): Output TV1 has no monitor section
[ 58.863] (II) intel(0): EDID for output LVDS1
[ 58.863] (II) intel(0): Manufacturer: LGD Model: 1f4 Serial#: 0
[ 58.863] (II) intel(0): Year: 2009 Week: 0
[ 58.863] (II) intel(0): EDID Version: 1.3
[ 58.863] (II) intel(0): Digital Display Input
[ 58.863] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 58.863] (II) intel(0): Gamma: 2.20
[ 58.863] (II) intel(0): No DPMS capabilities specified
[ 58.863] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 58.863] (II) intel(0): First detailed timing is preferred mode
[ 58.863] (II) intel(0): redX: 0.592 redY: 0.351 greenX: 0.334
greenY: 0.549
[ 58.863] (II) intel(0): blueX: 0.154 blueY: 0.130 whiteX: 0.313
whiteY: 0.329
[ 58.863] (II) intel(0): Manufacturer's mask: 0
[ 58.863] (II) intel(0): Supported detailed timing:
[ 58.863] (II) intel(0): clock: 69.3 MHz Image Size: 331 x 207 mm
[ 58.863] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end
1336 h_blank_end 1408 h_border: 0
[ 58.863] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808
v_blanking: 820 v_border: 0
[ 58.863] (II) intel(0): Supported detailed timing:
[ 58.863] (II) intel(0): clock: 46.2 MHz Image Size: 331 x 207 mm
[ 58.863] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end
1336 h_blank_end 1408 h_border: 0
[ 58.863] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808
v_blanking: 820 v_border: 0
[ 58.863] (II) intel(0): F253H�154WX7
[ 58.863] (II) intel(0): Unknown vendor-specific block 0
[ 58.863] (II) intel(0): EDID (in hex):
[ 58.864] (II) intel(0): 00ffffffffffff0030e4f40100000000
[ 58.864] (II) intel(0): 00130103902115780aba959759558c27
[ 58.864] (II) intel(0): 21505400000001010101010101010101
[ 58.864] (II) intel(0): 010101010101121b0080502014301820
[ 58.864] (II) intel(0): 44004bcf1000001b0a12008050201430
[ 58.864] (II) intel(0): 182044004bcf1000001b000000fe0046
[ 58.864] (II) intel(0): 32353348813135345758370a00000000
[ 58.864] (II) intel(0): 003c587490acc8e4ff01010a202000e3
[ 58.864] (II) intel(0): EDID vendor "LGD", prod id 500
[ 58.864] (II) intel(0): Printing DDC gathered Modelines:
[ 58.864] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1304
1336 1408 800 804 808 820 +hsync -vsync (49.2 kHz)
[ 58.864] (II) intel(0): Modeline "1280x800"x0.0 46.18 1280 1304
1336 1408 800 804 808 820 +hsync -vsync (32.8 kHz)
[ 58.864] (II) intel(0): Not using default mode "320x240"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "400x300"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "400x300"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "512x384"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "640x480"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "640x512"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "800x600"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "896x672"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "928x696"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "960x720"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "700x525"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Not using default mode "1024x768"
(doublescan mode not supported)
[ 58.864] (II) intel(0): Printing probed modes for output LVDS1
[ 58.864] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280
1304 1336 1408 800 804 808 820 +hsync -vsync (49.2 kHz)
[ 58.864] (II) intel(0): Modeline "1280x800"x40.0 46.18 1280
1304 1336 1408 800 804 808 820 +hsync -vsync (32.8 kHz)
[ 58.864] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 58.864] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 58.864] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 58.864] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 58.977] (II) intel(0): EDID for output VGA1
[ 58.977] (II) intel(0): Manufacturer: DEL Model: 404c Serial#: 842478413
[ 58.977] (II) intel(0): Year: 2010 Week: 15
[ 58.977] (II) intel(0): EDID Version: 1.3
[ 58.977] (II) intel(0): Analog Display Input, Input Voltage
Level: 0.700/0.300 V
[ 58.977] (II) intel(0): Sync: Separate SyncOnGreen
[ 58.977] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 58.977] (II) intel(0): Gamma: 2.20
[ 58.977] (II) intel(0): DPMS capabilities: StandBy Suspend Off;
RGB/Color Display
[ 58.977] (II) intel(0): Default color space is primary color space
[ 58.977] (II) intel(0): First detailed timing is preferred mode
[ 58.977] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300
greenY: 0.600
[ 58.977] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313
whiteY: 0.329
[ 58.977] (II) intel(0): Supported established timings:
[ 58.977] (II) intel(0): 720x400@70Hz
[ 58.977] (II) intel(0): 640x480@60Hz
[ 58.977] (II) intel(0): 640x480@75Hz
[ 58.977] (II) intel(0): 800x600@60Hz
[ 58.977] (II) intel(0): 800x600@75Hz
[ 58.977] (II) intel(0): 1024x768@60Hz
[ 58.977] (II) intel(0): 1024x768@75Hz
[ 58.977] (II) intel(0): 1280x1024@75Hz
[ 58.977] (II) intel(0): Manufacturer's mask: 0
[ 58.977] (II) intel(0): Supported standard timings:
[ 58.977] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 58.977] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 58.977] (II) intel(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 58.977] (II) intel(0): Supported detailed timing:
[ 58.977] (II) intel(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 58.977] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end
1960 h_blank_end 2240 h_border: 0
[ 58.977] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end
1059 v_blanking: 1089 v_border: 0
[ 58.977] (II) intel(0): Serial No: U847K044273M
[ 58.977] (II) intel(0): Monitor name: DELL P2210
[ 58.977] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30
H max: 83 kHz, PixClock max 165 MHz
[ 58.977] (II) intel(0): EDID (in hex):
[ 58.977] (II) intel(0): 00ffffffffffff0010ac4c404d333732
[ 58.977] (II) intel(0): 0f1401030a2f1e78eeee95a3544c9926
[ 58.977] (II) intel(0): 0f5054a54b00714f8180b30001010101
[ 58.977] (II) intel(0): 01010101010121399030621a274068b0
[ 58.977] (II) intel(0): 3600da281100001c000000ff00553834
[ 58.977] (II) intel(0): 374b3034343237334d0a000000fc0044
[ 58.977] (II) intel(0): 454c4c2050323231300a2020000000fd
[ 58.977] (II) intel(0): 00384b1e5310000a202020202020009d
[ 58.977] (II) intel(0): Printing probed modes for output VGA1
[ 58.977] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680
1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 58.977] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 58.977] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 58.977] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152
1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 58.977] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024
1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 58.977] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 58.977] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 58.977] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 58.977] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 58.977] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 58.977] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 59.189] (II) intel(0): EDID for output HDMI1
[ 59.189] (II) intel(0): Manufacturer: DEL Model: 404e Serial#: 808726601
[ 59.189] (II) intel(0): Year: 2010 Week: 15
[ 59.189] (II) intel(0): EDID Version: 1.3
[ 59.189] (II) intel(0): Digital Display Input
[ 59.189] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 59.189] (II) intel(0): Gamma: 2.20
[ 59.189] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 59.189] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 59.189] (II) intel(0): Default color space is primary color space
[ 59.189] (II) intel(0): First detailed timing is preferred mode
[ 59.189] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300
greenY: 0.600
[ 59.189] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313
whiteY: 0.329
[ 59.189] (II) intel(0): Supported established timings:
[ 59.189] (II) intel(0): 720x400@70Hz
[ 59.189] (II) intel(0): 640x480@60Hz
[ 59.189] (II) intel(0): 640x480@75Hz
[ 59.189] (II) intel(0): 800x600@60Hz
[ 59.189] (II) intel(0): 800x600@75Hz
[ 59.189] (II) intel(0): 1024x768@60Hz
[ 59.189] (II) intel(0): 1024x768@75Hz
[ 59.189] (II) intel(0): 1280x1024@75Hz
[ 59.189] (II) intel(0): Manufacturer's mask: 0
[ 59.189] (II) intel(0): Supported standard timings:
[ 59.189] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 59.189] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 59.189] (II) intel(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 59.189] (II) intel(0): Supported detailed timing:
[ 59.189] (II) intel(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 59.189] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end
1760 h_blank_end 1840 h_border: 0
[ 59.189] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end
1059 v_blanking: 1080 v_border: 0
[ 59.189] (II) intel(0): Serial No: U847K048040I
[ 59.189] (II) intel(0): Monitor name: DELL P2210
[ 59.189] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30
H max: 83 kHz, PixClock max 165 MHz
[ 59.189] (II) intel(0): EDID (in hex):
[ 59.189] (II) intel(0): 00ffffffffffff0010ac4e4049303430
[ 59.189] (II) intel(0): 0f140103802f1e78eeee95a3544c9926
[ 59.189] (II) intel(0): 0f5054a54b00714f8180b30001010101
[ 59.189] (II) intel(0): 0101010101017c2e90a0601a1e403020
[ 59.189] (II) intel(0): 3600da281100001a000000ff00553834
[ 59.189] (II) intel(0): 374b303438303430490a000000fc0044
[ 59.189] (II) intel(0): 454c4c2050323231300a2020000000fd
[ 59.189] (II) intel(0): 00384b1e5310000a202020202020004e
[ 59.189] (II) intel(0): Printing probed modes for output HDMI1
[ 59.189] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680
1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 59.189] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 59.189] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 59.189] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152
1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 59.189] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024
1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 59.189] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 59.189] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 59.189] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 59.189] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 59.189] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 59.190] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 59.191] (II) intel(0): EDID for output DP1
[ 59.199] (II) intel(0): EDID for output HDMI2
[ 59.199] (II) intel(0): EDID for output DP2
[ 59.200] (II) intel(0): EDID for output DP3
[ 59.201] (II) intel(0): EDID for output TV1
[ 59.201] (II) intel(0): Printing probed modes for output TV1
[ 59.201] (II) intel(0): Modeline "848x480"x30.0 14.51 848 849
912 944 480 481 512 513 (15.4 kHz)
[ 59.201] (II) intel(0): Modeline "640x480"x30.0 11.31 640 641
704 736 480 481 512 513 (15.4 kHz)
[ 59.201] (II) intel(0): Modeline "1024x768"x30.0 26.89 1024
1025 1088 1120 768 769 800 801 (24.0 kHz)
[ 59.201] (II) intel(0): Modeline "800x600"x30.0 17.00 800 801
864 896 600 601 632 633 (19.0 kHz)
[ 59.201] (II) intel(0): Output LVDS1 connected
[ 59.201] (II) intel(0): Output VGA1 connected
[ 59.201] (II) intel(0): Output HDMI1 connected
[ 59.201] (II) intel(0): Output DP1 disconnected
[ 59.201] (II) intel(0): Output HDMI2 disconnected
[ 59.201] (II) intel(0): Output DP2 disconnected
[ 59.201] (II) intel(0): Output DP3 disconnected
[ 59.201] (II) intel(0): Output TV1 disconnected
[ 59.201] (II) intel(0): Using spanning desktop for initial modes
[ 59.201] (II) intel(0): Output LVDS1 using initial mode 1280x800 +0+0
[ 59.201] (II) intel(0): Output VGA1 using initial mode 1680x1050 +1280+0
[ 59.201] (II) intel(0): Output HDMI1 using initial mode 1680x1050 +2960+0
[ 59.201] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[ 59.201] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 59.201] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 59.201] (**) intel(0): Display dimensions: (330, 210) mm
[ 59.201] (**) intel(0): DPI set to (357, 127)
[ 59.201] (II) Loading sub module "fb"
[ 59.201] (II) LoadModule: "fb"
[ 59.201] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 59.201] (II) Module fb: vendor="X.Org Foundation"
[ 59.201] compiled for 1.9.5, module version = 1.0.0
[ 59.201] ABI class: X.Org ANSI C Emulation, version 0.4
[ 59.201] (II) UnloadModule: "vesa"
[ 59.201] (II) Unloading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 59.201] (II) UnloadModule: "fbdev"
[ 59.201] (II) Unloading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 59.201] (II) UnloadModule: "fbdevhw"
[ 59.201] (II) Unloading /usr/lib64/xorg/modules/libfbdevhw.so
[ 59.201] (==) Depth 24 pixmap format is 32 bpp
[ 59.201] (II) intel(0): [DRI2] Setup complete
[ 59.201] (II) intel(0): [DRI2] DRI driver: i965
[ 59.201] (**) intel(0): Tiling enabled
[ 59.201] (**) intel(0): SwapBuffers wait enabled
[ 59.201] (==) intel(0): VideoRam: 262144 KB
[ 59.201] (EE) intel(0): Front buffer stride 18 kB exceeds display limit
[ 59.202] (EE) intel(0): Couldn't allocate initial framebuffer.
[ 59.202]
Fatal server error:
[ 59.202] AddScreen/ScreenInit failed for driver 0
[ 59.202]
[ 59.202]
Please consult the Fedora Project support
at http://wiki.x.org
for help.
[ 59.202] Please also check the log file at "/var/log/Xorg.1.log"
for additional information.
[ 59.202]


Hope that helps a display guru to advise me .. this configuration was
working perfectly on fc13..

Thanks
G



On Mon, Apr 11, 2011 at 10:49 PM, David Timms <dtimms@iinet.net.au> wrote:
> On 11/04/11 07:59, Gregory Machin wrote:
>> results. So this is not limited to one machine. Both machines are
>> upgrades from fc 13.
>
> Could you try the F14 live CD, to see if the problem occurs with that ?
>
> Could you make space and do an install to a new partition, to see if
> that has a problem ?
>
> Are you using binary graphics drivers from nvidia or ati ?
> --
> users mailing list
> users@lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 
Old 04-13-2011, 01:49 AM
Gregory Machin
 
Default upgrade fc 13 to 14 broke dual display

I have tested on with the Live cd and got the same results. I have
noticed that the monitor causing the issues is using the old vga type
plug.

Thanks



On Mon, Apr 11, 2011 at 10:49 PM, David Timms <dtimms@iinet.net.au> wrote:
> On 11/04/11 07:59, Gregory Machin wrote:
>> results. So this is not limited to one machine. Both machines are
>> upgrades from fc 13.
>
> Could you try the F14 live CD, to see if the problem occurs with that ?
>
> Could you make space and do an install to a new partition, to see if
> that has a problem ?
>
> Are you using binary graphics drivers from nvidia or ati ?
> --
> users mailing list
> users@lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 

Thread Tools




All times are GMT. The time now is 11:10 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org