FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Fedora User

 
 
LinkBack Thread Tools
 
Old 03-24-2011, 05:08 PM
Terry Polzin
 
Default Wireless adaptor DWL G-122 E1 /Fedora14 &Intel pentium(r)dual 3.00Ghz

On Thu, 2011-03-24 at 18:51 +0100, vicenc.melendez@dixieland.jazztel.es
wrote:
> Dear users members,
>
> I would like to use a wireless adaptor DWL G122 witha desktop machine
> (Intel (R) Pentium (R) D CPU 3.00 Ghz with memory 1001 MiB. Kernel
> 2.6.35.11-83.fc14.i686. GNOME 2.32.0
>
> I have tried Ralink r-2571w/rt2671 A B G network (rt73usb firmware
> adaptors with no results.
Please post the output of lsusb command with the device plugged into a
USB port.

--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 
Old 03-25-2011, 02:45 PM
 
Default Wireless adaptor DWL G-122 E1 /Fedora14 &Intel pentium(r)dual 3.00Ghz

Thank you very much Terry.

The content you ask for is (for two
different adaptors):

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1
root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002
Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002:
ID 07d1:3c0f D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.E) [Ralink
RT2870]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Blai_isabel_Vicenc@localhost ~]$ ^C
[Blai_isabel_Vicenc@localhost ~]$
lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003
Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001:
ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 2001:3a03
D-Link Corp. DWL-G132 (no firmware) [Atheros AR5523]
Bus 001 Device 001: ID
1d6b:0002 Linux Foundation 2.0 root hub


Quoting
vicenc.melendez@dixieland.jazztel.es:



>

>

>* *Dear users members,

>

>* *I would like to use a wireless adaptor DWL G122 witha desktop

> machine (Intel (R) Pentium (R) D CPU 3.00 Ghz with memory 1001 MiB.

> Kernel 2.6.35.11-83.fc14.i686. GNOME 2.32.0

>

>* *I have tried Ralink* r-2571w/rt2671 A B G network (rt73usb*

> firmware* adaptors with no results.

>

>* *Any help is welcome.

>

>* *Kind regards

>

>* *Vicenc Melendez

> ------------------------------------------------------------------

> 2007 Jazztel - Jazz Telecom, S.A.U.* * * * *http://www.jazztel.com

> Antes de imprimir este e-mail piense bien si es necesario hacerlo.






------------------------------------------------------------------

2007 Jazztel - Jazz Telecom, S.A.U.* * * * *http://www.jazztel.com

Antes de imprimir este e-mail piense bien si es necesario hacerlo.



--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 
Old 03-25-2011, 04:36 PM
JD
 
Default Wireless adaptor DWL G-122 E1 /Fedora14 &Intel pentium(r)dual 3.00Ghz

On 03/25/2011 08:45 AM, vicenc.melendez@dixieland.jazztel.es wrote:
>
> Thank you very much Terry.
>
> The content you ask for is (for two different adaptors):
>
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 002: ID 07d1:3c0f D-Link System AirPlus G DWL-G122
> Wireless Adapter(rev.E) [Ralink RT2870]
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> [Blai_isabel_Vicenc@localhost ~]$ ^C
> [Blai_isabel_Vicenc@localhost ~]$ lsusb
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 003: ID 2001:3a03 D-Link Corp. DWL-G132 (no firmware)
> [Atheros AR5523]
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
> Quoting vicenc.melendez@dixieland.jazztel.es:
>
> >
> >
> > Dear users members,
> >
> > I would like to use a wireless adaptor DWL G122 witha desktop
> > machine (Intel (R) Pentium (R) D CPU 3.00 Ghz with memory 1001 MiB.
> > Kernel 2.6.35.11-83.fc14.i686. GNOME 2.32.0
> >
> > I have tried Ralink r-2571w/rt2671 A B G network (rt73usb
> > firmware adaptors with no results.
> >
> > Any help is welcome.
> >
> > Kind regards
> >
> > Vicenc Melendez
> > ------------------------------------------------------------------
> > 2007 Jazztel - Jazz Telecom, S.A.U. http://www.jazztel.com
> > Antes de imprimir este e-mail piense bien si es necesario hacerlo.
>
>
> ------------------------------------------------------------------
> 2007 Jazztel - Jazz Telecom, S.A.U. http://www.jazztel.com
> Antes de imprimir este e-mail piense bien si es necesario hacerlo.
>
Originally, you had mentioned:

>> I have tried Ralink r-2571w/rt2671 A B G network (rt73usb firmware
adaptors with no results.

Now, you say one of your interfaces is

Bus 001 Device 002: ID 07d1:3c0f D-Link System AirPlus G DWL-G122
Wireless Adapter(rev.E) [Ralink RT2870]

The Ralink rt-2870 is supported in kernel 2.6.35 and higher.
I have tested it on a USB device with the rt-2870 chipset.
The driver for this chipset is unstable and it locked up my
machine twice!. The Linux Wireless web page at
http://wireless.kernel.org/en/users/Drivers/rt2800usb
says rt2870 is supported, which is true, but as I stated above, it is
unstable as far as the rt2870
chipset is concerned.
I am running on the rt2860 mini-pci module, and is very well supported
by the
rt2800/rt2x00 drivers. Only problems I have with this mini-pci card are
weak TX power, and poor Rx sensitivity.

$ lsmod | grep rt2
rt2800pci 6723 0
rt2800lib 28134 1 rt2800pci
rt2x00pci 4001 1 rt2800pci
rt2x00lib 25300 3 rt2800pci,rt2800lib,rt2x00pci


As far as
Bus 001 Device 003: ID 2001:3a03 D-Link Corp. DWL-G132 (no firmware)
[Atheros AR5523]

"ar5523 is a driver to support old Atheros USB 802.11abg chipsets. Work
is currently under developmen" Per:
http://wireless.kernel.org/en/users/Drivers/ar5523#ar5523

Cheers,

JD
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 
Old 03-26-2011, 07:04 AM
 
Default Wireless adaptor DWL G-122 E1 /Fedora14 &Intel pentium(r)dual 3.00Ghz

Thank you for your help.

I have followed your indications and I have
finally created a folder with a binary file in it: rt2879.bin.*

Please,
indicate, further what is to be done with this file; how to manipulate
it.

Best,

Vicenš Melendez

====================



On
03/25/2011 08:45 AM, vicenc.melendez@dixieland.jazztel.es wrote:
*******
>
******* > Thank you very much Terry.
******* >
*******
> The content you ask for is (for two different adaptors):
*******
>
******* > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1
root hub
******* > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1
root hub
******* > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1
root hub
******* > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1
root hub
******* > Bus 001 Device 002: ID 07d1:3c0f D-Link System
AirPlus G DWL-G122
******* > Wireless Adapter(rev.E) [Ralink RT2870]
******* > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
******* > [Blai_isabel_Vicenc@localhost ~]$ ^C
******* >
[Blai_isabel_Vicenc@localhost ~]$ lsusb
******* > Bus 005 Device 001: ID
1d6b:0001 Linux Foundation 1.1 root hub
******* > Bus 004 Device 001: ID
1d6b:0001 Linux Foundation 1.1 root hub
******* > Bus 003 Device 001: ID
1d6b:0001 Linux Foundation 1.1 root hub
******* > Bus 002 Device 001: ID
1d6b:0001 Linux Foundation 1.1 root hub
******* > Bus 001 Device 003: ID
2001:3a03 D-Link Corp. DWL-G132 (no firmware)
******* > [Atheros
AR5523]
******* > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0
root hub
******* >
******* > Quoting
vicenc.melendez@dixieland.jazztel.es:
******* >
******* >
>
******* > >
******* > >** Dear users members,
******* > >
******* > >** I would like to use a wireless
adaptor DWL G122 witha desktop
******* > > machine (Intel (R) Pentium
(R) D CPU 3.00 Ghz with memory 1001 MiB.
******* > > Kernel
2.6.35.11-83.fc14.i686. GNOME 2.32.0
******* > >
******* >
>** I have tried Ralink* r-2571w/rt2671 A B G network (rt73usb
*******
> > firmware* adaptors with no results.
******* > >
******* > >** Any help is welcome.
******* > >
*******
> >** Kind regards
******* > >
******* > >** Vicenc
Melendez
******* > >
------------------------------------------------------------------
*******
> > 2007 Jazztel - Jazz Telecom, S.A.U. http://www.jazztel.com
******* > > Antes de imprimir este e-mail piense bien si es necesario
hacerlo.
******* >
******* >
******* >
------------------------------------------------------------------
*******
> 2007 Jazztel - Jazz Telecom, S.A.U. http://www.jazztel.com
*******
> Antes de imprimir este e-mail piense bien si es necesario hacerlo.
******* >
******* Originally, you had mentioned:
*******
******** >> I have tried Ralink* r-2571w/rt2671 A B G network (rt73usb
firmware
******* adaptors with no results.
*******
******* Now,
you say one of your interfaces is
*******
******* Bus 001 Device 002:
ID 07d1:3c0f D-Link System AirPlus G DWL-G122
******* Wireless
Adapter(rev.E) [Ralink RT2870]
*******
******* The Ralink* rt-2870 is
supported in kernel 2.6.35 and higher.
******* I have tested it on a USB
device with the rt-2870 chipset.
******* The driver for this chipset is
unstable and it locked* up my
******* machine twice!. The Linux Wireless
web page at
*******
http://wireless.kernel.org/en/users/Drivers/rt2800usb
******* says rt2870
is supported, which is true, but as I stated above, it is
******* unstable
as far as the rt2870
******* chipset is concerned.
******* I am
running on the rt2860 mini-pci module, and is very well supported
*******
by the
******* rt2800/rt2x00 drivers. Only problems I have with this
mini-pci card are
******* weak TX power, and poor Rx sensitivity.
*******
******* $ lsmod | grep rt2
******* rt2800pci**************
6723* 0
******* rt2800lib************* 28134* 1 rt2800pci
*******
rt2x00pci************** 4001* 1 rt2800pci
******* rt2x00lib*************
25300* 3 rt2800pci,rt2800lib,rt2x00pci
*******
*******
*******
As far as
******* Bus 001 Device 003: ID 2001:3a03 D-Link Corp. DWL-G132
(no firmware)
******* [Atheros AR5523]
*******
*******
"ar5523 is a driver to support old Atheros USB 802.11abg chipsets. Work
******* is currently under developmen"*** Per:
*******
http://wireless.kernel.org/en/users/Drivers/ar5523#ar5523
*******
******* Cheers,
*******
*******
JD







S'estÓ citant
vicenc.melendez@dixieland.jazztel.es:



>

>

>* *Thank you very much Terry.

>

>* *The content you ask for is (for two different adaptors):

>

>* *Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

> Bus 001 Device 002: ID 07d1:3c0f D-Link System AirPlus G DWL-G122

> Wireless Adapter(rev.E) [Ralink RT2870]

> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

> [Blai_isabel_Vicenc@localhost ~]$ ^C

> [Blai_isabel_Vicenc@localhost ~]$ lsusb

> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

> Bus 001 Device 003: ID 2001:3a03 D-Link Corp. DWL-G132 (no firmware)

> [Atheros AR5523]

> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

>

>* *Quoting vicenc.melendez@dixieland.jazztel.es:

>

>>

>>

>> * *Dear users members,

>>

>> * *I would like to use a wireless adaptor DWL G122 witha desktop

>> machine (Intel (R) Pentium (R) D CPU 3.00 Ghz with memory 1001 MiB.

>> Kernel 2.6.35.11-83.fc14.i686. GNOME 2.32.0

>>

>> * *I have tried Ralink* r-2571w/rt2671 A B G network (rt73usb** *

>> firmware* adaptors with no results.

>>

>> * *Any help is welcome.

>>

>> * *Kind regards

>>

>> * *Vicenc Melendez

>> ------------------------------------------------------------------

>> 2007 Jazztel - Jazz Telecom, S.A.U.* * * * *http://www.jazztel.com

>> Antes de imprimir este e-mail piense bien si es necesario hacerlo.

>

>

> ------------------------------------------------------------------

> 2007 Jazztel - Jazz Telecom, S.A.U.* * * * *http://www.jazztel.com

> Antes de imprimir este e-mail piense bien si es necesario hacerlo.






------------------------------------------------------------------

2007 Jazztel - Jazz Telecom, S.A.U.* * * * *http://www.jazztel.com

Antes de imprimir este e-mail piense bien si es necesario hacerlo.



--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 
Old 07-15-2011, 05:16 PM
"valent.turkovic@gmail.com"
 
Default Wireless adaptor DWL G-122 E1 /Fedora14 &Intel pentium(r)dual 3.00Ghz

On Fri, Mar 25, 2011 at 6:36 PM, JD <jd1008@gmail.com> wrote:
> On 03/25/2011 08:45 AM, vicenc.melendez@dixieland.jazztel.es wrote:
>>
>> Thank you very much Terry.
>>
>> The content you ask for is (for two different adaptors):
>>
>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 001 Device 002: ID 07d1:3c0f D-Link System AirPlus G DWL-G122
>> Wireless Adapter(rev.E) [Ralink RT2870]
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> [Blai_isabel_Vicenc@localhost ~]$ ^C
>> [Blai_isabel_Vicenc@localhost ~]$ lsusb
>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 001 Device 003: ID 2001:3a03 D-Link Corp. DWL-G132 (no firmware)
>> [Atheros AR5523]
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>
>> Quoting vicenc.melendez@dixieland.jazztel.es:
>>
>> >
>> >
>> > * Dear users members,
>> >
>> > * I would like to use a wireless adaptor DWL G122 witha desktop
>> > machine (Intel (R) Pentium (R) D CPU 3.00 Ghz with memory 1001 MiB.
>> > Kernel 2.6.35.11-83.fc14.i686. GNOME 2.32.0
>> >
>> > * I have tried Ralink *r-2571w/rt2671 A B G network (rt73usb
>> > firmware *adaptors with no results.
>> >
>> > * Any help is welcome.
>> >
>> > * Kind regards
>> >
>> > * Vicenc Melendez
>> > ------------------------------------------------------------------
>> > 2007 Jazztel - Jazz Telecom, S.A.U. http://www.jazztel.com
>> > Antes de imprimir este e-mail piense bien si es necesario hacerlo.
>>
>>
>> ------------------------------------------------------------------
>> 2007 Jazztel - Jazz Telecom, S.A.U. http://www.jazztel.com
>> Antes de imprimir este e-mail piense bien si es necesario hacerlo.
>>
> Originally, you had mentioned:
>
> *>> I have tried Ralink *r-2571w/rt2671 A B G network (rt73usb firmware
> adaptors with no results.
>
> Now, you say one of your interfaces is
>
> Bus 001 Device 002: ID 07d1:3c0f D-Link System AirPlus G DWL-G122
> Wireless Adapter(rev.E) [Ralink RT2870]
>
> The Ralink *rt-2870 is supported in kernel 2.6.35 and higher.
> I have tested it on a USB device with the rt-2870 chipset.
> The driver for this chipset is unstable and it locked *up my
> machine twice!. The Linux Wireless web page at
> http://wireless.kernel.org/en/users/Drivers/rt2800usb
> says rt2870 is supported, which is true, but as I stated above, it is
> unstable as far as the rt2870
> chipset is concerned.
> I am running on the rt2860 mini-pci module, and is very well supported
> by the
> rt2800/rt2x00 drivers. Only problems I have with this mini-pci card are
> weak TX power, and poor Rx sensitivity.
>
> $ lsmod | grep rt2
> rt2800pci * * * * * * * 6723 *0
> rt2800lib * * * * * * *28134 *1 rt2800pci
> rt2x00pci * * * * * * * 4001 *1 rt2800pci
> rt2x00lib * * * * * * *25300 *3 rt2800pci,rt2800lib,rt2x00pci
>
>
> As far as
> Bus 001 Device 003: ID 2001:3a03 D-Link Corp. DWL-G132 (no firmware)
> [Atheros AR5523]
>
> "ar5523 is a driver to support old Atheros USB 802.11abg chipsets. Work
> is currently under developmen" * *Per:
> http://wireless.kernel.org/en/users/Drivers/ar5523#ar5523
>
> Cheers,
>
> JD

How to get AR5523 based wireless card working in Fedora 14?

Do I need to compile new drivers from source? Is firmware missing?

Is the best way to use windows drivers via ndiswrapper and just ignore
linux based drivers for now?

Cheers,
Valent.

--
follow me - www.twitter.com/valentt & http://kernelreloaded.blog385.com
linux, anime, spirituality, wireless, scuba, linuxmce smart home, zwave
ICQ: 2125241, Skype: valent.turkovic, MSN: valent.turkovic@hotmail.com
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 

Thread Tools




All times are GMT. The time now is 07:57 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ę2007 - 2008, www.linux-archive.org