Currently I have run out of ideas about how to activate, and create an working wifi on my new machine. It uses an Broadcom PHY - Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01). I have followed the the advices at linuxwireless.org - but no effect. Maybe I have made mistakes, or something went wrong - I couldn't tell that. I have already changed the latest kernel to PAE version, because wasn't were the default. Changed also the firmware package to newer, but what currently I have achieved is the following:
Networkmanager sees that I have wifi, but shows no wifi network, and says it's "disconnected". The iwconfig command says that I have wireless at eth1, but further data has seems to be set up to nothing* (IEEE 802.11* Nickname:"", Access Point: Not-Associated, Link Quality:5* Signal level:0* Noise level:0, Rx invalid nwid:0* invalid crypt:0* invalid misc:0).
Somewhere I have red that for that PHY is integrated with the bluetooth (witch is works - seems to be active), and I will need one of the 2.6.35.xx kernel for fedora. Well, I don't know, but I don't want back the originally shipped SuSE Enterprise Desktop 11....
--
PGP:* 06853DF7
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
08-19-2010, 06:17 AM
Chris Smart
No WIFI under HP Probook 4515s
On Thu, Aug 19, 2010 at 4:07 PM, Zoltan Hoppar <hopparz@gmail.com> wrote:
>
> Networkmanager sees that I have wifi, but shows no wifi network, and says
> it's "disconnected". The iwconfig command says that I have wireless at eth1,
> but further data has seems to be set up to nothing* (IEEE 802.11
> Nickname:"", Access Point: Not-Associated, Link Quality:5* Signal level:0
> Noise level:0, Rx invalid nwid:0* invalid crypt:0* invalid misc:0).
>
Perhaps it's a firmware issue? What does dmesg show when loading the module?
-c
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
08-19-2010, 06:48 AM
Zoltan Hoppar
No WIFI under HP Probook 4515s
Here is my dmesg - sorry for blowing up the topic...
Linux version 2.6.33.6-147.2.4.fc13.i686.PAE (mockbuild@x86-20.phx2.fedoraproject.org) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Fri Jul 23 17:21:06 UTC 2010
pci 0000:00:14.4:** bridge window [io* 0x1000-0x1fff]
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
system 00:04: [io* 0x0400-0x04cf] has been reserved
system 00:04: [io* 0x04d0-0x04d1] has been reserved
system 00:04: [io* 0x0680-0x06ff] has been reserved
system 00:04: [io* 0x0c00-0x0c01] has been reserved
system 00:04: [io* 0x0c50-0x0c52] has been reserved
system 00:04: [io* 0x0cd0-0x0cdb] has been reserved
system 00:04: [io* 0x0220-0x0227] has been reserved
system 00:04: [io* 0x0260-0x0273] has been reserved
system 00:04: [io* 0x0cdc-0x0cdf] has been reserved
system 00:04: [io* 0x0b00-0x0b0f] has been reserved
system 00:04: [io* 0x0b20-0x0b3f] has been reserved
system 00:04: [io* 0x0200-0x027f] could not be reserved
system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:05: [mem 0x000ec000-0x000fffff] could not be reserved
system 00:05: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfeb00000-0xfeb00fff] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved
pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:** bridge window [io* 0x5000-0x5fff]
pci 0000:00:01.0:** bridge window [mem 0x94200000-0x943fffff]
pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
pcieport 0000:00:09.0: irq 26 for MSI/MSI-X
acpiphp: Slot [1-1] registered
pci-stub: invalid id string ""
ACPI: AC Adapter [AC] (on-line)
ACPI: processor limited to max C-state 1
Non-volatile memory driver v1.3
ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
usb usb1: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686.PAE ehci_hcd
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
usb usb2: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686.PAE ehci_hcd
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
usb usb3: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686.PAE ohci_hcd
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
usb usb4: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686.PAE ohci_hcd
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
usb usb5: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686.PAE ohci_hcd
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
usb usb6: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686.PAE ohci_hcd
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
usb usb7: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686.PAE ohci_hcd
hub 7-0:1.0: USB hub found
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
usb 2-2: new high speed USB device using ehci_hcd and address 2
Write protecting the kernel read-only data: 1768k
dracut: dracut-005-3.fc13
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
usb 2-2: New USB device found, idVendor=04f2, idProduct=b159
usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-2: Product: CNF8243
usb 2-2: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-2: SerialNumber: SN0001
[drm]** HDMI-A
usb 4-3: new low speed USB device using ohci_hcd and address 2
usb 4-3: New USB device found, idVendor=04d9, idProduct=1133
usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 04d9:1133 as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input5
generic-usb 0003:04D9:1133.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1133] on usb-0000:00:12.1-3/input0
usb 6-3: new full speed USB device using ohci_hcd and address 2
usb 6-3: New USB device found, idVendor=03f0, idProduct=231d
usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-3: Product: HP Integrated Module
usb 6-3: Manufacturer: Broadcom Corp
ACPI: Video Device [IGFX] (multi-head: yes* rom: no* post: no)
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
SELinux: initialized (dev dm-0, type ext4), uses xattr
readahead-collector: starting
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2
sky2 0000:02:00.0: irq 27 for MSI/MSI-X
wl 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
input: CNF8243 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input8
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
HP WMI: Unknown key pressed - 0
HP WMI: Unknown key pressed - 0
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:01:05.1: irq 28 for MSI/MSI-X
EXT4-fs (sda1): mounted filesystem with ordered data mode
EXT4-fs (dm-2): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 3604472k swap on /dev/mapper/VolGroup-lv_swap.* Priority:-1 extents:1 across:3604472k
readahead-disable-service: delaying service auditd
ip6_tables: (C) 2000-2006 Netfilter Core Team
powernow-k8: Found 1 AMD Athlon(tm) II Dual-Core M320 processors (2 cpu cores) (version 2.20.00)
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines