FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor


 
 
LinkBack Thread Tools
 
Old 04-30-2008, 09:24 PM
"Xypron debian"
 
Default

Package: xserver-xorg-input-aiptek
Version: 1:1.1.1-1
Severity: important

I want to use an Aiptek HyperPen 12000U for drawing in GIMP.

The table is mapped to two input devices
/dev/input/mouse2
/dev/input/event7

/dev/input/mouse is used via /dev/input/mice for controlling the normal mouse cursor.
/dev/input/event7 is mapped to stylus in xorg.conf. Stylus is enabled in GIMP as input device.

On the drawing pane a mouse cursor is shown refleciting the position of /dev/input/mouse2 and a tool cursor reflecting the position of
the table pen ("stylus").
Unfortunately the two cursors do not have the same x and y position. The difference varies with pen movement.

A work around is to map the generic mouse to /dev/input/mouse1 only instead of /dev/input/mice. But this means that the tablet pen can not be
used to control the tool boxes. This is not satisfactory.


-- Package-specific info:
/var/lib/x11/X.roster does not exist.

/var/lib/x11/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx 1 root root 13 2007-11-13 23:49 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1693212 2008-04-15 19:41 /usr/bin/Xorg

Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg

VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GS] (rev a2)

/etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum.

Xorg X server configuration file status:
-rw-r--r-- 1 root root 7105 2008-04-30 22:51 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 12 14:29:35 PDT 2007

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Wed Sep 12 14:30:30 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "stylus" "SendCoreEvents"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"

# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "glx"
Load "v4l"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "deadacute"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
# Option "Device" "/dev/input/mouse1"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "aiptek"
Option "Type" "stylus"
Option "USB" "on"
Option "Device" "/dev/input/aiptek"
Option "Mode" "absolute"
# Option "Mode" "relative"
Option "AlwaysCore" "on"
Option "Cursor" "stylus"
Option "Pressure" "linear"
Option "zMin" "0"
Option "zMax" "512"
Option "zThreshold" "0"
Option "KeepShape" "off"
Option "debuglevel" "20"
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "aiptek"
Option "Type" "cursor"
Option "Device" "/dev/input/aiptek"
Option "Mode" "absolute"
Option "AlwaysCore" "on"
Option "Cursor" "puck"
Option "Pressure" "linear"
Option "zMin" "0"
Option "zMax" "512"
Option "zThreshold" "0"
Option "KeepShape" "on"
Option "debuglevel" "20"
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "aiptek"
Option "Type" "eraser"
Option "Device" "/dev/input/aiptek"
Option "Mode" "absolute"
Option "AlwaysCore" "on"
Option "Cursor" "stylus"
Option "Pressure" "linear"
Option "zMin" "0"
Option "zMax" "512"
Option "zThreshold" "0"
Option "KeepShape" "on"
Option "debuglevel" "20"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
VendorName "Samsung"
ModelName "Samsung SyncMaster 215TW(Digital)"
DisplaySize 356 222
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Gamma 1
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "1280x768@60" 80.1 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
ModeLine "1280x720@60" 74.5 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
ModeLine "1280x800@75" 107.2 1280 1360 1496 1712 800 801 804 835 -hsync +vsync
ModeLine "1280x768@75" 103.0 1280 1360 1496 1712 768 769 772 802 -hsync +vsync
ModeLine "1280x800@60" 83.5 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
ModeLine "1440x900@75" 136.5 1440 1536 1688 1936 900 901 904 940 -hsync +vsync
ModeLine "1440x900@60" 106.5 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
ModeLine "1600x1024@60" 136.4 1600 1704 1872 2144 1024 1025 1028 1060 -hsync +vsync
ModeLine "1680x1050@60" 147.1 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
ModeLine "1920x1200@60" 193.2 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "nvidia"
BoardName "nv"
Screen 0
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1440x900@75" "1440x900@60" "1280x800@60" "1600x1024@60" "1280x768@75" "1680x1050@60" "1280x800@75" "1920x1200@60" "1280x720@60" "1280x768@60" "800x600@60" "800x600@75" "800x600@72" "800x600@56"
EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "1680x1050@60 +0+0; 1440x900@75 +0+0; 1440x900@60 +0+0; 1280x800@60 +0+0; 1600x1024@60 +0+0; 1280x768@75 +0+0; 1280x800@75 +0+0; 1280x720@60 +0+0; 1280x768@60 +0+0; 800x600@60 +0+0; 800x600@75 +0+0; 800x600@72 +0+0; 800x600@56 +0+0; 1680x1050 +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1680x1050 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection



Xorg X server log files on system:
-rw-r--r-- 1 root root 27419 2008-04-30 22:51 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9)
Current Operating System: Linux BY4N850200 2.6.24-16-generic #1 SMP Thu Apr 10 13:23:42 UTC 2008 i686
Build Date: 15 April 2008 05:26:17PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 30 22:51:05 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "stylus"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/X11/misc,/usr/share/fonts/X11/cyrillic,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81dc500
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0282 card 1043,80a3 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1282 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2282 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3282 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4282 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7282 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,3044 card 1043,808a rev 80 class 0c,00,10 hdr 00
(II) PCI: 00:08:0: chip 105a,3373 card 1043,80f5 rev 02 class 01,04,00 hdr 00
(II) PCI: 00:0a:0: chip 11ab,4320 card 1043,811a rev 13 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1043,80ed rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,812a rev 60 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 0000,0000 rev 80 class 07,80,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,02e1 card 1043,8215 rev a2 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf9f00000 - 0xfbffffff (0x2100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xf8ffffff (0x19000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation G73 [GeForce 7600 GS] rev 162, Mem @ 0xfb000000/24, 0xe0000000/28, 0xfa000000/24, BIOS @ 0xf9f00000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf9e00000 - 0xf9e000ff (0x100) MX[b]
[1] -1 0 0xf9c00000 - 0xf9c03fff (0x4000) MX[b]
[2] -1 0 0xf9900000 - 0xf991ffff (0x20000) MX[b]
[3] -1 0 0xf9a00000 - 0xf9a00fff (0x1000) MX[b]
[4] -1 0 0xf9800000 - 0xf98007ff (0x800) MX[b]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[6] -1 0 0xf9f00000 - 0xf9f1ffff (0x20000) MX[b](B)
[7] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[8] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[9] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[10] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[11] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[13] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[14] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[18] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[19] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[b]
[20] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[b]
[21] -1 0 0x0000c800 - 0x0000c803 (0x4) IX[b]
[22] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[b]
[23] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b]
[24] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[25] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[b]
[26] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[27] -1 0 0x00009800 - 0x0000987f (0x80) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf9e00000 - 0xf9e000ff (0x100) MX[b]
[1] -1 0 0xf9c00000 - 0xf9c03fff (0x4000) MX[b]
[2] -1 0 0xf9900000 - 0xf991ffff (0x20000) MX[b]
[3] -1 0 0xf9a00000 - 0xf9a00fff (0x1000) MX[b]
[4] -1 0 0xf9800000 - 0xf98007ff (0x800) MX[b]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[6] -1 0 0xf9f00000 - 0xf9f1ffff (0x20000) MX[b](B)
[7] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[8] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[9] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[10] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[11] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[13] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[14] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[18] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[19] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[b]
[20] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[b]
[21] -1 0 0x0000c800 - 0x0000c803 (0x4) IX[b]
[22] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[b]
[23] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b]
[24] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[25] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[b]
[26] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[27] -1 0 0x00009800 - 0x0000987f (0x80) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf9e00000 - 0xf9e000ff (0x100) MX[b]
[5] -1 0 0xf9c00000 - 0xf9c03fff (0x4000) MX[b]
[6] -1 0 0xf9900000 - 0xf991ffff (0x20000) MX[b]
[7] -1 0 0xf9a00000 - 0xf9a00fff (0x1000) MX[b]
[8] -1 0 0xf9800000 - 0xf98007ff (0x800) MX[b]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[10] -1 0 0xf9f00000 - 0xf9f1ffff (0x20000) MX[b](B)
[11] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[12] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[13] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[19] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[20] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[21] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[24] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[25] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[b]
[26] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[b]
[27] -1 0 0x0000c800 - 0x0000c803 (0x4) IX[b]
[28] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[b]
[29] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b]
[30] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[31] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[b]
[32] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[33] -1 0 0x00009800 - 0x0000987f (0x80) IX[b]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) NVIDIA GLX Module 169.12 Thu Feb 14 18:45:56 PST 2008
(II) Loading extension GLX
(II) LoadModule: "v4l"
(II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.1
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "aiptek"
(II) Loading /usr/lib/xorg/modules/input//aiptek_drv.so
(II) Module aiptek: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) v4l driver for Video4Linux
(II) NVIDIA dlloader X Driver 169.12 Thu Feb 14 17:55:38 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf9e00000 - 0xf9e000ff (0x100) MX[b]
[5] -1 0 0xf9c00000 - 0xf9c03fff (0x4000) MX[b]
[6] -1 0 0xf9900000 - 0xf991ffff (0x20000) MX[b]
[7] -1 0 0xf9a00000 - 0xf9a00fff (0x1000) MX[b]
[8] -1 0 0xf9800000 - 0xf98007ff (0x800) MX[b]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[10] -1 0 0xf9f00000 - 0xf9f1ffff (0x20000) MX[b](B)
[11] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[12] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[13] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[19] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[20] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[21] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[24] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[25] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[b]
[26] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[b]
[27] -1 0 0x0000c800 - 0x0000c803 (0x4) IX[b]
[28] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[b]
[29] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b]
[30] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[31] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[b]
[32] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[33] -1 0 0x00009800 - 0x0000987f (0x80) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf9e00000 - 0xf9e000ff (0x100) MX[b]
[5] -1 0 0xf9c00000 - 0xf9c03fff (0x4000) MX[b]
[6] -1 0 0xf9900000 - 0xf991ffff (0x20000) MX[b]
[7] -1 0 0xf9a00000 - 0xf9a00fff (0x1000) MX[b]
[8] -1 0 0xf9800000 - 0xf98007ff (0x800) MX[b]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[10] -1 0 0xf9f00000 - 0xf9f1ffff (0x20000) MX[b](B)
[11] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[12] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[13] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[20] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[21] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[22] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[23] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[24] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[26] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[27] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[28] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[b]
[29] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[b]
[30] -1 0 0x0000c800 - 0x0000c803 (0x4) IX[b]
[31] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[b]
[32] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b]
[33] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[34] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[b]
[35] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[36] -1 0 0x00009800 - 0x0000987f (0x80) IX[b]
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1680x1050 +0+0"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7600 GS (G73) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.73.22.25.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7600 GS at PCI:1:0:0:
(--) NVIDIA(0): Samsung SyncMaster (DFP-0)
(--) NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1680x1050+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (94, 95); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf9e00000 - 0xf9e000ff (0x100) MX[b]
[5] -1 0 0xf9c00000 - 0xf9c03fff (0x4000) MX[b]
[6] -1 0 0xf9900000 - 0xf991ffff (0x20000) MX[b]
[7] -1 0 0xf9a00000 - 0xf9a00fff (0x1000) MX[b]
[8] -1 0 0xf9800000 - 0xf98007ff (0x800) MX[b]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[10] -1 0 0xf9f00000 - 0xf9f1ffff (0x20000) MX[b](B)
[11] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[12] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[13] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[20] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[21] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[22] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[23] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[24] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[26] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[27] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[28] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[b]
[29] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[b]
[30] -1 0 0x0000c800 - 0x0000c803 (0x4) IX[b]
[31] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[b]
[32] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b]
[33] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[34] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[b]
[35] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[36] -1 0 0x00009800 - 0x0000987f (0x80) IX[b]
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Setting mode "1680x1050+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) xf86AiptekInit(): begins
(**) xf86AiptekConfig: device not shared btw stylus and stylus
(**) Option "AlwaysCore" "on"
(**) stylus: doesn't report core events
(**) Option "Device" "/dev/input/aiptek"
(==) HID Device name: "Aiptek"
(==) HID Driver Version: 1.0.0
(==) HID Driver knows it has 1 devices configured
(==) HID Driver is using 16 as the fd
>From ioctl() xCapacity=5999
>From ioctl() yCapacity=4499
(**) stylus device is /dev/input/aiptek
(**) Option "DebugLevel" "20"
(**) Debug level set to 20
(EE) stylus: invalid Mode ('normal', 'soft' or 'hard').
(**) stylus is in absolute mode
(**) Option "USB" "on"
(**) stylus: reading USB link
(**) Option "KeepShape" "off"
(**) Option "ZThreshold" "0"
(**) stylus: ZThreshold/ThresholdZ = 0
(**) Option "ZMax" "512"
(**) stylus: ZMax/MaxZ = 512
(**) Option "ZMin" "0"
(**) stylus: ZMin/MinZ = 0
(**) Option "BaudRate" "9600"
(**) stylus: BaudRate 9600
(**) stylus: xf86AiptekInit() finished
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Generic Keyboard: XkbLayout: "de"
(**) Option "XkbVariant" "deadacute"
(**) Generic Keyboard: XkbVariant: "deadacute"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) evaluating device (stylus)
(II) XINPUT: Adding extended input device "stylus" (type: Stylus)
xf86AiptekProc() type=stylus flags=65 request=0
xf86AiptekProc request=INIT
xf86AiptekControlProc
In xf86AiptekOpenDevice, with fd=-1
(**) xTop invalid; adjusted to 0
(**) yTop invalid; adjusted to 0
(**) xBottom invalid; adjusted to 5999
(**) yBottom invalid; adjusted to 4499
(**) ScreenNo invalid; adjusted to 0
xf86AiptekProc Success request=0
(II) Configured Mouse: ps2EnableDataReporting: succeeded
xf86AiptekProc() type=stylus flags=65 request=1
xf86AiptekProc request=ON
In xf86AiptekOpenDevice, with fd=-1
(==) HID Device name: "Aiptek"
(==) HID Driver Version: 1.0.0
(==) HID Driver knows it has 1 devices configured
(==) HID Driver is using 17 as the fd
>From ioctl() xCapacity=5999
>From ioctl() yCapacity=4499
Able to open aiptek device
xf86AiptekProc Success request=1
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
(II) NVIDIA(0): Setting mode "nvidia-auto-select"


-- System Information:
Debian Release: lenny/sid
APT prefers hardy-updates
APT policy: (500, 'hardy-updates'), (500, 'hardy-security'), (500, 'hardy-proposed'), (500, 'hardy')
Architecture: i386 (i686)

Kernel: Linux 2.6.24-16-generic (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages xserver-xorg-input-aiptek depends on:
ii libc6 2.7-10ubuntu3 GNU C Library: Shared libraries
ii xserver-xor 2:1.4.1~git20080131-1ubuntu9 Xorg X server - core server

xserver-xorg-input-aiptek recommends no packages.

-- no debconf information

--
GMX startet ShortView.de. Hier findest Du Leute mit Deinen Interessen!
Jetzt dabei sein: http://www.shortview.de/?mc=sv_ext_mf@gmx

--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 
Old 05-01-2008, 02:30 AM
Willie Wong
 
Default

On Wed, Apr 30, 2008 at 09:53:21PM +0200, Penguin Lover b.n. squawked:
> It basically doesn't say "you better upgrade to texlive before tetex
> goes in the /dev/null department". It says "well, tetex maintainer steps
> down." That's very much different -someone could have stepped in and
> replaced Esser. It is alarming, my fault for having missed it, but not

True.

> nearly as much as what I'd expect. Most importantly, no link at all was
> posted for a migration guide.

I don't think the migration guide had been written then.

> What I'd expect is gentoo-announce to shout loud things like "Attention,
> please! People using tetex should consider upgrading to texlive unless
> their very own life depends on texlive! The migration guide is there
> [link]. Problems should be reported here,here and here." Possibly with
> repeated announcements: one for ~arch people ("hey, this is beginning to
> be pushed in testing,report here..."),so that also arch people can
> prepare, and then repeat it for the arch people, when it's time.

well, tetex is perfectly useable and still perfectly compatible with
the majority (if not all) of the modules you can find on CTAN, so I
don't think there is really a necessity to switch to texlive.

It really isn't that big a deal yet: tetex is still in the tree and
people who default to using it aren't missing out on much. I'm sure
that when the day comes that tetex is to be removed by the tree
cleaners, you will get sufficient notification about its pending
removal (through messages in emerge --pretend --update world and
such).

> Shouldn't
> gentoo-announce serve the purpose of announcing stuff like texlive,
> expat upgrade, gcc/glibc upgrades, the upcoming baselayout-2 thing (that
> from posts here looks like a potential storm of s**t for the unwary),
> etc.? If it's not gentoo-announce, what is the right place?

One would think so. But in the grand scale of things, I really don't think
texlive it is fair to put texlive in the same category as stuff in
system. Technically a lot of this should go in the GMN, but no one can
really anticipate something like what happened to baselayout-2
happening.

Package removals usually have their last-rites announced in the
GWN/GMN, and are usually masked for a period before the removal. In a
way you and I are being early adopters for the texlive migration.

W

--
All my friends tell me peer pressure is cool.
Sortir en Pantoufles: up 510 days, 51 min
--
gentoo-user@lists.gentoo.org mailing list
 
Old 05-01-2008, 01:29 PM
Gavin Seddon
 
Default

Hi,I dl from skype.com and with gcc4~ IT WORKS!
thanks
g
--
gentoo-user@lists.gentoo.org mailing list
 
Old 05-01-2008, 02:10 PM
Alan McKinnon
 
Default

On Thursday 01 May 2008, Gavin Seddon wrote:
> Hi,I dl from skype.com and with gcc4~ IT WORKS!
> thanks
> g

I seem to remember having something similar. I think it was one of the
2.0.0 versions - 48? 63? Could never get it to work.

Eventually I just put an old ebuild in my overlay and used that instead.
The latest skype also works for me. Did you download the qt-static or
the qt version of skype?

--
Alan McKinnon
alan dot mckinnon at gmail dot com

--
gentoo-user@lists.gentoo.org mailing list
 
Old 05-01-2008, 08:26 PM
Michael Sullivan
 
Default

On Thu, 2008-05-01 at 22:22 +0100, Neil Bothwick wrote:
> On Thu, 01 May 2008 14:12:38 -0500, Michael Sullivan wrote:
>
> > I unmerged gtk-doc and ran my command again. Now it wants to install
> > gtk-doc, but it's still blocked:
> >
> > catherine ~ # emerge -av =gtk+-2.12.9-r2
> >
> > These are the packages that would be merged, in order:
> >
> > Calculating dependencies... done!
> > [ebuild N ] dev-util/gtk-doc-1.8-r2 USE="debug doc -emacs" 182 kB
> > [ebuild N ] dev-util/gtk-doc-am-1.10-r1 395 kB
> > [ebuild U ] x11-libs/gtk+-2.12.9-r2 [2.12.8] USE="X cups debug doc
> > jpeg tiff -vim-syntax -xinerama" 15,652 kB
> > [blocks B ] dev-util/gtk-doc-am (is blocking
> > dev-util/gtk-doc-1.8-r2)
>
> It looks like you are trying to mix testing and stable packages. On my
> amd64 setup, gtk+-2.12.9-r2 is ~amd64 but gtk-doc-1.8-r2 is amd64. If
> that's the case, adding gtk-doc to package.keywords should resolve this.
>
>

It did.

--
gentoo-user@lists.gentoo.org mailing list
 
Old 05-02-2008, 06:07 AM
"PEDRO MACANAS VALVERDE"
 
Default

De:* Michael Perry
Enviado el: miÚ 30/04/2008 14:58
Para: ubuntu-users
*
Asunto:




> moments before it is due to launch the live cd, it hangs while loading, i have tried many ways to install ubuntu on the machine and am now stuck! i have* tried bothe the i386 and x64 and on both, the system hangs.


Try Wubi.
*
Regards.--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 
Old 05-02-2008, 02:11 PM
Sheramel Siriban
 
Default

Hi!

Guys I just want you to know that I',m pleased that you released hardy heron. Compiz is finally workin. Just want to ask if there is a work around on how to burn videos that are playable to any video/audio devices.

Thanks and more power!




Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
 
Old 05-02-2008, 11:26 PM
Will Woods
 
Default

On Fri, 2008-05-02 at 17:54 -0400, Tom "spot" Callaway wrote:
> Passing this along for consideration.

(original email ref:
http://lists.freedesktop.org/archives/distributions/2008-May/000163.html)

´╗┐I worked on Apport for Fedora during (I think) the F7 release cycle:
https://code.launchpad.net/~wwoods/apport/fedora
http://fedoraproject.org/wiki/Releases/FeatureApport

Things have matured for a year, and I think related technologies have
matured to the point where this could be done right in Fedora and other
distributions. Here's a braindump of some of the things involved.

1) Linux kernel support
Neil Horman worked on a kernel patch that fixed some of the hackery that
Ubuntu's kernel was using to make it work[1].
I don't have the commit id offhand, but the upshot is that you can use
arguments with command pipes in core_pattern as of.. 2.6.24, I think.

2) packaging abstraction
There were some other distro-specific bits to fill in - like looking up
package name from a filename. In Fedora I believe we can easily (and
more accurately) handle this by pulling BuildIDs[2] out of the core dump
itself.

Apport could also be using PackageKit as its packaging backend, rather
than having its own private abstractions for these things.

3) Reporting format
We had a discussion about the proper format for bug reports, and
coordinating this with other projects. Apport is using a RFC822
(essentially email)-formatted bug report with specific "headers"/"tags"
to indicate various metadata about the report[3].

GNOME's bug-buddy, as I understand it, uses Google's Breakpad[4] libs to
generate its reports; Mozilla projects do the same.

Kerneloops is a similar idea but (obviously) their reports are all just
Linux kernel oopses.

I couldn't find details on a crash-report format specific to KDE but if
someone wants to point me at some existing work in this area I'd
appreciate it.

4) Server-side
´╗┐Apport in Ubuntu uses launchpad as the server-side to report bugs to;
python-bugzilla[5] came out of my efforts to implement that for Fedora.

Mozilla's Breakpad efforts have produced a server and web client for
collecting and viewing crash reports[6]. I think it makes sense for
Fedora to follow the lead of GNOME and Mozilla and use Breakpad-style
reports.

All the pieces are there. We just need someone with the time, skills,
and drive to put 'em all together.

-w

´╗┐[1] http://kerneltrap.org/node/14010
´╗┐[2] http://fedoraproject.org/wiki/Releases/FeatureBuildId
´╗┐[3] ´╗┐https://wiki.ubuntu.com/Apport#head-43f381da3ef07fd0e601265ff1c835894d77b159
[4] http://code.google.com/p/google-breakpad/
´╗┐[5] https://fedorahosted.org/python-bugzilla/
[6] http://wiki.mozilla.org/Breakpad

--
fedora-devel-list mailing list
fedora-devel-list@redhat.com
https://www.redhat.com/mailman/listinfo/fedora-devel-list
 
Old 05-02-2008, 11:45 PM
Kevin Kofler
 
Default

Will Woods <wwoods <at> redhat.com> writes:
> I couldn't find details on a crash-report format specific to KDE but if
> someone wants to point me at some existing work in this area I'd
> appreciate it.

KDE has something called KCrash. KCrash intercepts crashes in KDE applications
and brings up a crash window with 2 tabs. The first tab is just the
usually "Sorry, I have crashed" boilerplate, the second tab is for backtraces:
switching to that second tab causes KCrash to invoke GDB and attach it to the
executable, obtaining a backtrace which is displayed in a text box on that tab;
there are 2 buttons on the tab: one to copy the backtrace to the clipboard, one
to save it to a file. And of course the dialog has a Close button. There is no
special format for crash reports, it's just a GDB backtrace. If GDB is not
installed, KCrash just displays an error that no backtrace could be obtained
because GDB is not installed.

Kevin Kofler

--
fedora-devel-list mailing list
fedora-devel-list@redhat.com
https://www.redhat.com/mailman/listinfo/fedora-devel-list
 
Old 05-03-2008, 02:09 AM
Matt Domsch
 
Default

On Fri, May 02, 2008 at 11:45:18PM +0000, Kevin Kofler wrote:
> Will Woods <wwoods <at> redhat.com> writes:
> > I couldn't find details on a crash-report format specific to KDE but if
> > someone wants to point me at some existing work in this area I'd
> > appreciate it.
>
> KDE has something called KCrash. KCrash intercepts crashes in KDE applications
> and brings up a crash window with 2 tabs. The first tab is just the
> usually "Sorry, I have crashed" boilerplate, the second tab is for backtraces:
> switching to that second tab causes KCrash to invoke GDB and attach it to the
> executable, obtaining a backtrace which is displayed in a text box on that tab;
> there are 2 buttons on the tab: one to copy the backtrace to the clipboard, one
> to save it to a file. And of course the dialog has a Close button. There is no
> special format for crash reports, it's just a GDB backtrace. If GDB is not
> installed, KCrash just displays an error that no backtrace could be obtained
> because GDB is not installed.

GDB is a 6.5MB RPM. If we're offering package group selections, such
as "volunteer bug reporter", which includes these tools, we could add
gdb to that group.

--
Matt Domsch
Linux Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux

--
fedora-devel-list mailing list
fedora-devel-list@redhat.com
https://www.redhat.com/mailman/listinfo/fedora-devel-list
 

Thread Tools




All times are GMT. The time now is 10:31 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ę2007 - 2008, www.linux-archive.org