FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Fedora User

 
 
LinkBack Thread Tools
 
Old 04-06-2010, 07:57 PM
Andrew Junev
 
Default Kernel Oops right after boot

Hello All,

While trying to fix cd-rom automount issue, I noticed my kernel makes
several Oops'es right after boot. I do not notice any strange behavior
whatsoever. It's just these lines in the /var/log/messages that make
me think something is wrong:

2010-04-06T23:33:59.461793+04:00 frontend1 abrt: Kerneloops: Reported 1 kernel oopses to Abrt
2010-04-06T23:33:59.461891+04:00 frontend1 abrtd: Directory 'kerneloops-1270582439-1' creation detected
2010-04-06T23:34:05.996433+04:00 frontend1 abrtd: Getting local universal unique identification
2010-04-06T23:34:06.030973+04:00 frontend1 abrtd: Crash is in database already (dup of /var/cache/abrt/kerneloops-1270580900-1)
2010-04-06T23:34:06.031042+04:00 frontend1 abrtd: Deleting crash kerneloops-1270582439-1 (dup of kerneloops-1270580900-1), sending dbus signal
2010-04-06T23:35:59.112531+04:00 frontend1 abrt: Kerneloops: Reported 1 kernel oopses to Abrt
2010-04-06T23:35:59.112582+04:00 frontend1 abrtd: Directory 'kerneloops-1270582559-1' creation detected
2010-04-06T23:35:59.206403+04:00 frontend1 abrtd: Getting local universal unique identification
2010-04-06T23:35:59.210845+04:00 frontend1 abrtd: New crash /var/cache/abrt/kerneloops-1270582559-1, processing
2010-04-06T23:35:59.503073+04:00 frontend1 abrtd: Registered Action plugin 'RunApp'
2010-04-06T23:35:59.503133+04:00 frontend1 abrtd: RunApp('/var/cache/abrt/kerneloops-1270582559-1','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')
2010-04-06T23:36:18.187097+04:00 frontend1 ntpd[1165]: synchronized to 90.156.233.43, stratum 3
2010-04-06T23:36:18.187128+04:00 frontend1 ntpd[1165]: time reset +0.697205 s
2010-04-06T23:36:18.187142+04:00 frontend1 ntpd[1165]: kernel time sync status change 2001
2010-04-06T23:37:59.810046+04:00 frontend1 abrt: Kerneloops: Reported 1 kernel oopses to Abrt
2010-04-06T23:37:59.810164+04:00 frontend1 abrtd: Directory 'kerneloops-1270582679-1' creation detected
2010-04-06T23:37:59.896992+04:00 frontend1 abrtd: Getting local universal unique identification
2010-04-06T23:37:59.901369+04:00 frontend1 abrtd: New crash /var/cache/abrt/kerneloops-1270582679-1, processing
2010-04-06T23:37:59.901413+04:00 frontend1 abrtd: RunApp('/var/cache/abrt/kerneloops-1270582679-1','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')
2010-04-06T23:40:00.018233+04:00 frontend1 abrt: Kerneloops: Reported 1 kernel oopses to Abrt
2010-04-06T23:40:00.018286+04:00 frontend1 abrtd: Directory 'kerneloops-1270582800-1' creation detected
2010-04-06T23:40:00.106862+04:00 frontend1 abrtd: Getting local universal unique identification
2010-04-06T23:40:00.385884+04:00 frontend1 abrtd: New crash /var/cache/abrt/kerneloops-1270582800-1, processing
2010-04-06T23:40:00.385984+04:00 frontend1 abrtd: RunApp('/var/cache/abrt/kerneloops-1270582800-1','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')
2010-04-06T23:41:57.269786+04:00 frontend1 ntpd[1165]: synchronized to 212.192.253.168, stratum 2
2010-04-06T23:42:00.112898+04:00 frontend1 abrt: Kerneloops: Reported 1 kernel oopses to Abrt
2010-04-06T23:42:00.112990+04:00 frontend1 abrtd: Directory 'kerneloops-1270582920-1' creation detected
2010-04-06T23:42:00.204395+04:00 frontend1 abrtd: Getting local universal unique identification
2010-04-06T23:42:00.208968+04:00 frontend1 abrtd: New crash /var/cache/abrt/kerneloops-1270582920-1, processing
2010-04-06T23:42:00.208986+04:00 frontend1 abrtd: RunApp('/var/cache/abrt/kerneloops-1270582920-1','test x"`cat component`" = x"xorg-x11-server-Xorg" && cp /var/log/Xorg.0.log .')



I think it all started when I replaced the motherboard. I mentioned
some time ago in this mailing list that my new motherboard (MSI
P43T-C51) didn't work in Linux with my old video adapter (NVidia 8600GT).
As I couldn't find a solution, I just put an older 7600GS to be able
to use the machine. So I used the system in this configuration as a
MythTV frontend and had no troubles at all (except for the recently
disappeared automount, but I tend to think it's caused by a human
factor perhaps I changed something related to automount, just can't
figure out what it is).

Originally I was using proprietary NVidia driver. Today I switched
back to Nouveau, but Oopses are still there - no difference at all...

I kindly ask for your help in getting to know what actually
causes these oopses. I'd like to have that fixed, if that is at all
possible.

Dmesg output is attached (hope my message won't be too large).


--
Best regards,
Andrew Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.10-90.fc12.i686 (mockbuild@x86-07.phx2.fedoraproject.org) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #1 SMP Tue Mar 23 10:21:29 UTC 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7ff90 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000373fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 10000-16000
RAMDISK: 37c8a000 - 37fefe81
Allocated new RAMDISK: 00b37000 - 00e9ce81
Move RAMDISK from 0000000037c8a000 - 0000000037fefe80 to 00b37000 - 00e9ce80
ACPI: RSDP 000f9c30 00014 (v00 ACPIAM)
ACPI: RSDT 7ff90000 00040 (v01 7519MS A7519200 20100107 MSFT 00000097)
ACPI: FACP 7ff90200 00084 (v01 7519MS A7519200 20100107 MSFT 00000097)
ACPI: DSDT 7ff90440 07043 (v01 A7519 A7519200 00000200 INTL 20051117)
ACPI: FACS 7ff9e000 00040
ACPI: APIC 7ff90390 0006C (v01 7519MS A7519200 20100107 MSFT 00000097)
ACPI: MCFG 7ff90400 0003C (v01 7519MS OEMMCFG 20100107 MSFT 00000097)
ACPI: OEMB 7ff9e040 00072 (v01 7519MS A7519200 20100107 MSFT 00000097)
ACPI: HPET 7ff9a440 00038 (v01 7519MS OEMHPET 20100107 MSFT 00000097)
ACPI: GSCI 7ff9e0c0 02024 (v01 7519MS GMCHSCI 20100107 MSFT 00000097)
ACPI: SSDT 7ffa0480 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
1163MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00013000 - 00019e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000b318d8] TEXT DATA BSS ==> [0000400000 - 0000b318d8]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [0000b32000 - 0000b36167] BRK ==> [0000b32000 - 0000b36167]
#6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#7 [0000b37000 - 0000e9ce81] NEW RAMDISK ==> [0000b37000 - 0000e9ce81]
#8 [0000013000 - 000001a000] BOOTMAP ==> [0000013000 - 000001a000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0007ff90
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0007ff90
On node 0 totalpages: 524062
free_area_init_node: node 0, pgdat c09b9260, node_mem_map c1001200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 2328 pages used for memmap
HighMem zone: 295546 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2400000 s34456 r0 d22888 u1048576
pcpu-alloc: s34456 r0 d22888 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519966
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us selinux=0
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 10483200 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:0007ff90)
Memory: 2056476k/2096704k available (3675k kernel code, 38584k reserved, 2314k data, 548k init, 1191496k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc09da000 - 0xc0a63000 ( 548 kB)
.data : 0xc0796e54 - 0xc09d9710 (2314 kB)
.text : 0xc0400000 - 0xc0796e54 (3675 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2130.778 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4261.55 BogoMIPS (lpj=2130778)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 23010 entries in 46 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (8522.72 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=508 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3256 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
devtmpfs: initialized
regulator: core version 0.5
Time: 19:31:28 Date: 04/06/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - F6, should be F5 (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xbc00-0xbc1f]
pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
pci 0000:00:1a.2: reg 20 io port: [0xb800-0xb81f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbff8000-0xfbffbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f]
pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
pci 0000:00:1d.2: reg 20 io port: [0xb080-0xb09f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbffc000-0xfbffc3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007]
pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03]
pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887]
pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa49f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbff6000-0xfbff67ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbff5c00-0xfbff5cff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfeafffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 io port: [0xdc00-0xdc07]
pci 0000:02:00.0: reg 14 io port: [0xd880-0xd883]
pci 0000:02:00.0: reg 18 io port: [0xd800-0xd807]
pci 0000:02:00.0: reg 1c io port: [0xd480-0xd483]
pci 0000:02:00.0: reg 20 io port: [0xd400-0xd40f]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
pci 0000:04:00.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:04:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
pci 0000:04:00.0: reg 20 64bit mmio pref: [0xfaff0000-0xfaffffff]
pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebdffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:07: ioport range 0xa00-0xadf has been reserved
system 00:07: ioport range 0xae0-0xaef has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x500-0x57f has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xc000-0xcfff
pci 0000:00:01.0: MEM window: 0xfc000000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0xd000-0xdfff
pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x1000-0x1fff
pci 0000:00:1c.1: MEM window: 0x80400000-0x805fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000080600000-0x000000807fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.5: IO window: 0xe000-0xefff
pci 0000:00:1c.5: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1c.5: PREFETCH window: 0x000000faf00000-0x000000faffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0105 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0104 -> 0107)
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfeafffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff]
pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff]
pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:03: resource 1 mem: [0x80400000-0x805fffff]
pci_bus 0000:03: resource 2 pref mem [0x80600000-0x807fffff]
pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 2 pref mem [0xfaf00000-0xfaffffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3479k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1270582288.276:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1698
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: SSDT 7ffa00f0 00382 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbff6000 port 0xfbff6100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xfbff6000 port 0xfbff6180 irq 28
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 28
ata4: SATA max UDMA/133 abar m2048@0xfbff6000 port 0xfbff6280 irq 28
ata5: SATA max UDMA/133 abar m2048@0xfbff6000 port 0xfbff6300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xfbff6000 port 0xfbff6380 irq 28
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.10-90.fc12.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffc000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.10-90.fc12.i686 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.10-90.fc12.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.10-90.fc12.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.10-90.fc12.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32.10-90.fc12.i686 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32.10-90.fc12.i686 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32.10-90.fc12.i686 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 6:929:545
rtc_cmos 00:03: setting system clock to 2010-04-06 19:31:29 UTC (1270582289)
Initalizing network drop monitor service
ata1: SATA link down (SStatus 0 SControl 300)
usb 5-2: new low speed USB device using uhci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
usb 5-2: New USB device found, idVendor=0bc7, idProduct=0006
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: RF receiver
usb 5-2: Manufacturer: X10 WTI
usb 5-2: configuration #1 chosen from 1 choice
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: New USB device found, idVendor=046d, idProduct=0b04
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Logitech BT Mini-Receiver
usb 6-1: Manufacturer: Logitech
usb 6-1: configuration #1 chosen from 1 choice
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 3 ports detected
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 6-1.2: new full speed USB device using uhci_hcd and address 3
ata3.00: ATA-8: WDC WD2500BEVS-00UST0, 01.01A01, max UDMA/133
ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-0 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
usb 6-1.2: New USB device found, idVendor=046d, idProduct=c713
usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1.2: Product: Logitech BT Mini-Receiver
usb 6-1.2: Manufacturer: Logitech
usb 6-1.2: SerialNumber: 00076172757B
usb 6-1.2: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input3
generic-usb 0003:046D:C713.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.2/input0
usb 6-1.3: new full speed USB device using uhci_hcd and address 4
ata4: SATA link down (SStatus 0 SControl 300)
usb 6-1.3: New USB device found, idVendor=046d, idProduct=c714
usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1.3: Product: Logitech BT Mini-Receiver
usb 6-1.3: Manufacturer: Logitech
usb 6-1.3: SerialNumber: 00076172757B
usb 6-1.3: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.3/6-1.3:1.0/input/input4
logitech 0003:046D:C714.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.3/input0
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 548k freed
Write protecting the kernel text: 3676k
Write protecting the kernel read-only data: 1756k
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udev: starting version 145
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_jmicron 0000:02:00.0: setting latency timer to 64
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
iTCO_vendor_support: vendor-support=0
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 29 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xf7f90000, 40:61:86:36:6e:98, XID 1c4000c0 IRQ 29
ata7.00: ATAPI: PIONEER DVD-RW DVR-111, 1.23, max UDMA/66
ata7.00: configured for UDMA/66
scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-111 1.23 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg1 type 5
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b200a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 05.73.22.16
[drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[drm] nouveau 0000:01:00.0: BIT table 'd' not found
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
[drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03000302 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0c011312 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 4: 020223f1 00c0c080
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDF5D
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE59E
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xECAF
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEE2F
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF01D
[TTM] Zone kernel: Available graphics memory: 435098 kiB.
[TTM] Zone highmem: Available graphics memory: 1030846 kiB.
[drm] nouveau 0000:01:00.0: 256 MiB VRAM
[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[drm] nouveau 0000:01:00.0: Saving VGA fonts
[drm] nouveau 0000:01:00.0: Enable TV-Out with tv module option
[drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC889A: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3893: dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1284: realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1300: realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0885
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x49000, bo f6042800
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
[drm] nouveau 0000:01:00.0: 0xD3A9: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 3)
[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
Console: switching to colour frame buffer device 240x67
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
device-mapper: multipath: version 1.1.0 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k
microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xcb
platform microcode: firmware: requesting intel-ucode/06-0f-06
microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xcb
platform microcode: firmware: requesting intel-ucode/06-0f-06
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
r8169: eth0: link up
r8169: eth0: link up
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
eth0: no IPv6 routers present
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
f71882fg: Found f71882fg chip at 0xa00, revision 32
f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode
f71882fg f71882fg.2560: Fan: 4 is in duty-cycle mode
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
fuse init (API version 7.13)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 
Old 04-08-2010, 06:22 AM
Andrew Junev
 
Default Kernel Oops right after boot

Ok, let me rephrase the question. How do I analyze "kernel oops"
messages in the modern kernels (I use Fedora 12, kernel 2.6.32)?
Is there any how-to or FAQ available?

--
Best regards,
Andrew



--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
 

Thread Tools




All times are GMT. The time now is 09:29 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org