----- Original Message ----

> From: Ambrogio <fn050202@interfree.it>
<snip>

> There is someone that can help me on solve this 2 problems? First to
> send the bug report (even from command line), and above all to obtain
> the X working?
>
> Tnx
> Ambrogio

What I've done for my desktop PC is to run gtf to get a proper modeline,
then insert that modeline into xorg.conf. FWIW:
~$ gtf 1366 768 60

# 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 795 -HSync +Vsync



--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

On Sunday 07 February 2010 22:03:05 Steven I Usdansky wrote:
> ----- Original Message ----
> > From: Ambrogio <fn050202@interfree.it>
> > There is someone that can help me on solve this 2 problems? First to
> > send the bug report (even from command line), and above all to obtain
> > the X working?
>
> What I've done for my desktop PC is to run gtf to get a proper modeline,
> then insert that modeline into xorg.conf. FWIW:
> ~$ gtf 1366 768 60
>
> # 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
> Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 795
> -HSync +Vsync

Just a remark, the modeline is of course monitor dependent. You should not
just copy-paste the above values in your xorg.conf, but rather run the above
command on your machine and copy-paste the numbers it provides in your
particular case, for your particular monitor.

HTH, :-)
Marko

--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

On Sun, Feb 07, 2010 at 22:40:58 +0000,
Marko Vojinovic <vvmarko@gmail.com> wrote:
>
> Just a remark, the modeline is of course monitor dependent. You should not
> just copy-paste the above values in your xorg.conf, but rather run the above
> command on your machine and copy-paste the numbers it provides in your
> particular case, for your particular monitor.

In case it isn't clear, putting in a bad modeline can damage your video card
and/or monitor.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

On Tuesday 09 February 2010 08:58:25 Ambrogio wrote:
> Starting with the resolution:
> 1366x768 (found on google)
> the x value is not a multiple of 8. 1368 is!!!!
> gtf gives this line:
> Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 795
> -HSync +Vsync

How about posting the output of xrandr? That will tell us what modes are
autodetected and configured.

> ------ begin xorg.cong
> # Xorg configuration created by livna-config-display
>
> Section "Files"
> ModulePath "/usr/lib/xorg/modules/extensions/nvidia"
> ModulePath "/usr/lib/xorg/modules"
> EndSection
>
> Section "ServerFlags"
> Option "AIGLX" "on"
> EndSection
>
> Section "Device"
> Identifier "Videocard0"
> Driver "nvidia"
> Option "AddARGBGLXVisuals" "True"
> EndSection
>
> Section "Extensions"
> Option "Composite" "Enable"
> EndSection
>
> Section "Monitor"
> Identifier "Acer Aspire 5739G"
> # 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
> Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772
> 795 -HSync +Vsync EndSection
> Section "Screen"
> Identifier "Default Screen"
> Device "Videocard0"
> Monitor "Acer Aspire 5739G"
> DefaultDepth 16

Why is the default depth 16? How about changing this to 24 or 32?

> SubSection "Display"
> Depth 16

And here also...

> Modes "1368x768_60.00" "1366x768"
> EndSubSection
> EndSection
> -------- end xorg.conf
[snip]
> I can provide the entire xorg log if it can be usefull.

Yes, it would be useful. When troubleshooting X issues, it is always a good
idea to post the output of xrandr and the contents of xorg.conf and
Xorg.0.log, preferably simultaneously because the information in them is
typically correlated.

Try to change the default depth above (on both lines) and post all three
things in full so we can examine them.

HTH, :-)
Marko

--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

On Tue, Feb 09, 2010 at 09:58:25 +0100,
Ambrogio <fn050202@interfree.it> wrote:
>
> My xorg.conf is not complete so I wrote the section screen and monitor
> My complete Xorg configuration file is

For your comparison here is what I use on a system with and nv28 and an LCD
monitor that has a native resolution of 1280x1024.

# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"

# keyboard added by system-config-display
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105+inet"
Option "XkbLayout" "us"
EndSection

Section "Monitor"
Identifier "Monitor0"
ModelName "NEC MultiSync LCD2010X"
HorizSync 31.0 - 80.0
VertRefresh 56.0 - 85.0
Modeline "1280x1024_70.00" 129.00 1280 1368 1504 1728 1024 1027 1034 1069 -hsync +vsync
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nouveau"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 1280 1024
Depth 24
Modes "1280x1024_70.00"
EndSubSection
EndSection

--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines