Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Fedora User (http://www.linux-archive.org/fedora-user/)
-   -   rhgb problems @ boot time (http://www.linux-archive.org/fedora-user/21674-rhgb-problems-boot-time.html)

"Daniel B. Thurman" 12-22-2007 10:35 PM

rhgb problems @ boot time
 
For some reason log after post install of Fedora 8, the services-loading gui screen stopped
working. What you get just after a udev is a X11-busy-watch flash(instead of a gnome cursor
with a blue spinner), then it continues back in text-mode remounting / as rw, mounting
the local filesystems, enabling quota, and enabling the swap partition. At that point, after
several minutes go by, the gnome login screen appears. It all works fine, except for the
missing services-loading screen.

At this point, I am unable to fix the services loading screen and it appears that this screen
attempts to get started by rhgb? I peered into the /etc/rhgb/temp directory and found
the xorg.log file there. The contents of this file is dumped below.

Please note the first 3 lines at the top. Seems that there is a problem there
somehow. I think there might be a minor problem with ACPI; selinux is avc denied
access to the ACPI socket. Finally, the very end of this log show a failure to find
a 'fixed' font and the X/rhgb crashes?

File: /etc/rhgb/temp/xorg.log
============================================
_XSERVTransSocketCreateListener: failed to bind listener
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: failed to create listener for unix

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Fedora 8 Red Hat, Inc.
Current Operating System: Linux (none) 2.6.23.9-85.fc8 #1 SMP Fri Dec 7 15:49:59 EST 2007 i686
Build Date: 13 December 2007
Build ID: xorg-x11-server 1.3.0.0-37.fc8
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/etc/rhgb/temp/xorg.log", Time: Sat Dec 22 14:31:37 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x820bd60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(++) using VT number 8

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7192 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:0d:0: chip 1000,000f card 1000,1000 rev 37 class 01,00,00 hdr 80
(II) PCI: 00:0d:1: chip 1000,000f card 1000,1000 rev 37 class 01,00,00 hdr 80
(II) PCI: 00:0f:0: chip 8086,1229 card 8086,0008 rev 05 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 1073,000d card 1073,000d rev 03 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:12:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:12:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:12:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:14:0: chip 1013,00bc card 8086,4948 rev 23 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:18:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:20:0) Cirrus Logic GD 5480 rev 35, Mem @ 0xfc000000/25, 0xfa00a000/12
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xfa400000 from 0xfa7fffff to 0xfa3fffff
(II) Active PCI resource ranges:
[0] -1 0 0xfa000000 - 0xfa007fff (0x8000) MX[b]
[1] -1 0 0xfa100000 - 0xfa1fffff (0x100000) MX[b]
[2] -1 0 0xfa00c000 - 0xfa00cfff (0x1000) MX[b]
[3] -1 0 0xfa009000 - 0xfa009fff (0x1000) MX[b]
[4] -1 0 0xfa00b400 - 0xfa00b4ff (0x100) MX[b]
[5] -1 0 0xfa008000 - 0xfa008fff (0x1000) MX[b]
[6] -1 0 0xfa00b000 - 0xfa00b0ff (0x100) MX[b]
[7] -1 0 0xfa400000 - 0xfa3fffff (0x0) MX[b]O
[8] -1 0 0xfa00a000 - 0xfa00afff (0x1000) MX[b](B)
[9] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[10] -1 0 0x00001080 - 0x0000109f (0x20) IX[b]
[11] -1 0 0x00001050 - 0x0000105f (0x10) IX[b]
[12] -1 0 0x00001060 - 0x0000107f (0x20) IX[b]
[13] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[14] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfa000000 - 0xfa007fff (0x8000) MX[b]
[1] -1 0 0xfa100000 - 0xfa1fffff (0x100000) MX[b]
[2] -1 0 0xfa00c000 - 0xfa00cfff (0x1000) MX[b]
[3] -1 0 0xfa009000 - 0xfa009fff (0x1000) MX[b]
[4] -1 0 0xfa00b400 - 0xfa00b4ff (0x100) MX[b]
[5] -1 0 0xfa008000 - 0xfa008fff (0x1000) MX[b]
[6] -1 0 0xfa00b000 - 0xfa00b0ff (0x100) MX[b]
[7] -1 0 0xfa400000 - 0xfa3fffff (0x0) MX[b]O
[8] -1 0 0xfa00a000 - 0xfa00afff (0x1000) MX[b](B)
[9] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[10] -1 0 0x00001080 - 0x0000109f (0x20) IX[b]
[11] -1 0 0x00001050 - 0x0000105f (0x10) IX[b]
[12] -1 0 0x00001060 - 0x0000107f (0x20) IX[b]
[13] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[14] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfa000000 - 0xfa007fff (0x8000) MX[b]
[5] -1 0 0xfa100000 - 0xfa1fffff (0x100000) MX[b]
[6] -1 0 0xfa00c000 - 0xfa00cfff (0x1000) MX[b]
[7] -1 0 0xfa009000 - 0xfa009fff (0x1000) MX[b]
[8] -1 0 0xfa00b400 - 0xfa00b4ff (0x100) MX[b]
[9] -1 0 0xfa008000 - 0xfa008fff (0x1000) MX[b]
[10] -1 0 0xfa00b000 - 0xfa00b0ff (0x100) MX[b]
[11] -1 0 0xfa400000 - 0xfa3fffff (0x0) MX[b]O
[12] -1 0 0xfa00a000 - 0xfa00afff (0x1000) MX[b](B)
[13] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001080 - 0x0000109f (0x20) IX[b]
[17] -1 0 0x00001050 - 0x0000105f (0x10) IX[b]
[18] -1 0 0x00001060 - 0x0000107f (0x20) IX[b]
[19] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[20] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules//extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules//fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules//extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules//extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "cirrus"
(II) Loading /usr/lib/xorg/modules//drivers/cirrus_drv.so
(II) Module cirrus: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules//input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules//input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(II) Primary Device is: PCI 00:14:0
(--) Assigning device section with no busID to primary device
(--) Chipset CLGD5480 found
(II) Loading sub module "cirrus_alpine"
(II) LoadModule: "cirrus_alpine"
(II) Loading /usr/lib/xorg/modules//drivers/cirrus_alpine.so
(II) Module cirrus_alpine: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfa000000 - 0xfa007fff (0x8000) MX[b]
[5] -1 0 0xfa100000 - 0xfa1fffff (0x100000) MX[b]
[6] -1 0 0xfa00c000 - 0xfa00cfff (0x1000) MX[b]
[7] -1 0 0xfa009000 - 0xfa009fff (0x1000) MX[b]
[8] -1 0 0xfa00b400 - 0xfa00b4ff (0x100) MX[b]
[9] -1 0 0xfa008000 - 0xfa008fff (0x1000) MX[b]
[10] -1 0 0xfa00b000 - 0xfa00b0ff (0x100) MX[b]
[11] -1 0 0xfa400000 - 0xfa3fffff (0x0) MX[b]O
[12] -1 0 0xfa00a000 - 0xfa00afff (0x1000) MX[b](B)
[13] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001080 - 0x0000109f (0x20) IX[b]
[17] -1 0 0x00001050 - 0x0000105f (0x10) IX[b]
[18] -1 0 0x00001060 - 0x0000107f (0x20) IX[b]
[19] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[20] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfa000000 - 0xfa007fff (0x8000) MX[b]
[5] -1 0 0xfa100000 - 0xfa1fffff (0x100000) MX[b]
[6] -1 0 0xfa00c000 - 0xfa00cfff (0x1000) MX[b]
[7] -1 0 0xfa009000 - 0xfa009fff (0x1000) MX[b]
[8] -1 0 0xfa00b400 - 0xfa00b4ff (0x100) MX[b]
[9] -1 0 0xfa008000 - 0xfa008fff (0x1000) MX[b]
[10] -1 0 0xfa00b000 - 0xfa00b0ff (0x100) MX[b]
[11] -1 0 0xfa400000 - 0xfa3fffff (0x0) MX[b]O
[12] -1 0 0xfa00a000 - 0xfa00afff (0x1000) MX[b](B)
[13] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001080 - 0x0000109f (0x20) IX[b]
[20] -1 0 0x00001050 - 0x0000105f (0x10) IX[b]
[21] -1 0 0x00001060 - 0x0000107f (0x20) IX[b]
[22] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[23] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Enabling PCI device
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) CIRRUS(0): initializing int10
(II) CIRRUS(0): Primary V_BIOS segment is: 0xc000
(**) CIRRUS(0): Depth 16, (--) framebuffer bpp 16
(==) CIRRUS(0): RGB weight 565
(==) CIRRUS(0): Default visual is TrueColor
(==) CIRRUS(0): Using SW cursor
(--) CIRRUS(0): Linear framebuffer at 0xFC000000
(--) CIRRUS(0): Using MMIO
(--) CIRRUS(0): MMIO registers at 0xFA00A000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) CIRRUS(0): I2C bus "I2C bus 1" initialized.
(II) CIRRUS(0): I2C bus "I2C bus 2" initialized.
(II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) CIRRUS(0): Manufacturer: HTC Model: b3ba Serial#: 1
(II) CIRRUS(0): Year: 2000 Week: 21
(II) CIRRUS(0): EDID Version: 1.1
(II) CIRRUS(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) CIRRUS(0): Sync: Separate Composite
(II) CIRRUS(0): Max H-Image Size [cm]: horiz.: 37 vert.: 28
(II) CIRRUS(0): Gamma: 2.22
(II) CIRRUS(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) CIRRUS(0): redX: 0.609 redY: 0.342 greenX: 0.423 greenY: 0.588
(II) CIRRUS(0): blueX: 0.150 blueY: 0.064 whiteX: 0.281 whiteY: 0.311
(II) CIRRUS(0): Supported VESA Video Modes:
(II) CIRRUS(0): 720x400@70Hz
(II) CIRRUS(0): 720x400@88Hz
(II) CIRRUS(0): 640x480@60Hz
(II) CIRRUS(0): 640x480@67Hz
(II) CIRRUS(0): 640x480@72Hz
(II) CIRRUS(0): 640x480@75Hz
(II) CIRRUS(0): 800x600@56Hz
(II) CIRRUS(0): 800x600@60Hz
(II) CIRRUS(0): 800x600@72Hz
(II) CIRRUS(0): 800x600@75Hz
(II) CIRRUS(0): 832x624@75Hz
(II) CIRRUS(0): 1024x768@87Hz (interlaced)
(II) CIRRUS(0): 1024x768@60Hz
(II) CIRRUS(0): 1024x768@70Hz
(II) CIRRUS(0): 1024x768@75Hz
(II) CIRRUS(0): 1280x1024@75Hz
(II) CIRRUS(0): 1152x870@75Hz
(II) CIRRUS(0): Manufacturer's mask: 0
(II) CIRRUS(0): Supported Future Video Modes:
(II) CIRRUS(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) CIRRUS(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) CIRRUS(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) CIRRUS(0): #3: hsize: 1152 vsize 864 refresh: 85 vid: 22897
(II) CIRRUS(0): #4: hsize: 1280 vsize 960 refresh: 85 vid: 22913
(II) CIRRUS(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) CIRRUS(0): #6: hsize: 1600 vsize 1200 refresh: 70 vid: 19113
(II) CIRRUS(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) CIRRUS(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 95 kHz,
(II) CIRRUS(0): Monitor name: CM715
(II) CIRRUS(0): Supported additional Video Mode:
(II) CIRRUS(0): clock: 157.5 MHz Image Size: 360 x 270 mm
(II) CIRRUS(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
(II) CIRRUS(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) CIRRUS(0): Supported additional Video Mode:
(II) CIRRUS(0): clock: 202.5 MHz Image Size: 360 x 270 mm
(II) CIRRUS(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) CIRRUS(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) CIRRUS(0): EDID (in hex):
(II) CIRRUS(0): 00ffffffffffff002283bab301000000
(II) CIRRUS(0): 150a01016c251c7ae826a29c576c9626
(II) CIRRUS(0): 10484fffff8031594559615971598159
(II) CIRRUS(0): 8199a94aa94f000000fd0032781e5fff
(II) CIRRUS(0): 000a202020202020000000fc00434d37
(II) CIRRUS(0): 31350a20202020202020863d00c05100
(II) CIRRUS(0): 304040a01300680e1100001e1a4f4030
(II) CIRRUS(0): 62b0324040c01300680e1100001e003f
(II) CIRRUS(0): EDID vendor "HTC", prod id 46010
(II) CIRRUS(0): Using hsync ranges from config file
(II) CIRRUS(0): Using vrefresh ranges from config file
(II) CIRRUS(0): Printing DDC gathered Modelines:
(II) CIRRUS(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) CIRRUS(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) CIRRUS(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) CIRRUS(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) CIRRUS(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) CIRRUS(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) CIRRUS(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) CIRRUS(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) CIRRUS(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
(II) CIRRUS(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) CIRRUS(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) CIRRUS(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) CIRRUS(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) CIRRUS(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) CIRRUS(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(II) CIRRUS(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) CIRRUS(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) CIRRUS(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) CIRRUS(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) CIRRUS(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(II) CIRRUS(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(II) CIRRUS(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
(II) CIRRUS(0): Modeline "1152x864"x84.8 119.75 1152 1232 1352 1552 864 867 871 910 -hsync +vsync (77.2 kHz)
(II) CIRRUS(0): Modeline "1280x960"x84.9 148.25 1280 1368 1504 1728 960 963 967 1011 -hsync +vsync (85.8 kHz)
(II) CIRRUS(0): Modeline "1280x1024"x84.8 159.50 1280 1376 1512 1744 1024 1027 1034 1078 -hsync +vsync (91.5 kHz)
(II) CIRRUS(0): Modeline "1600x1200"x69.9 190.50 1600 1720 1888 2176 1200 1203 1207 1252 -hsync +vsync (87.5 kHz)
(II) CIRRUS(0): Modeline "1600x1200"x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz)
(==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0)
(==) CIRRUS(0): Write-combining range (0xfc000000,0x100000)
(--) CIRRUS(0): Memory Config reg 1 is 0x1C
(--) CIRRUS(0): Memory Config reg 2 is 0x01
(--) CIRRUS(0): VideoRAM: 2048 kByte
(==) CIRRUS(0): Min pixel clock is 12 MHz
(--) CIRRUS(0): Max pixel clock is 200 MHz
(II) CIRRUS(0): Monitor0: Using hsync range of 30.00-95.00 kHz
(II) CIRRUS(0): Monitor0: Using vrefresh range of 50.00-120.00 Hz
(II) CIRRUS(0): Clock range: 12.00 to 200.00 MHz
(II) CIRRUS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) CIRRUS(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1440x900" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1080" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using driver mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using driver mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using driver mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using driver mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using driver mode "1280x960" (insufficient memory for mode)
(II) CIRRUS(0): Not using driver mode "1280x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using driver mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using driver mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using driver mode "1152x864" (insufficient memory given virtual size)
(II) CIRRUS(0): Not using driver mode "1152x864" (insufficient memory given virtual size)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory given virtual size)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory given virtual size)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory given virtual size)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory given virtual size)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory given virtual size)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory given virtual size)
(II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory given virtual size)
(II) CIRRUS(0): Not using default mode "1360x768" (width too large for virtual size)
(II) CIRRUS(0): Not using default mode "1280x800" (height too large for virtual size)
(II) CIRRUS(0): Not using default mode "1280x800" (height too large for virtual size)
(II) CIRRUS(0): Not using default mode "1280x800" (height too large for virtual size)
(II) CIRRUS(0): Not using default mode "1280x800" (height too large for virtual size)
(--) CIRRUS(0): Virtual size is 1280x768 (pitch 1280)
(**) CIRRUS(0): *Default mode "1280x768": 118.5 MHz, 68.6 kHz, 85.0 Hz
(II) CIRRUS(0): Modeline "1280x768" 118.53 1280 1368 1504 1728 768 769 772 807 -hsync +vsync
(**) CIRRUS(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) CIRRUS(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) CIRRUS(0): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 84.9 Hz
(II) CIRRUS(0): Modeline "1024x768" 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync
(**) CIRRUS(0): *Driver mode "800x600": 56.8 MHz, 53.7 kHz, 84.9 Hz
(II) CIRRUS(0): Modeline "800x600" 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync
(**) CIRRUS(0): *Driver mode "640x480": 35.0 MHz, 42.9 kHz, 84.6 Hz
(II) CIRRUS(0): Modeline "640x480" 35.00 640 664 728 816 480 483 487 507 -hsync +vsync
(**) CIRRUS(0): Default mode "1280x768": 103.0 MHz, 60.2 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1280x768" 102.98 1280 1360 1496 1712 768 769 772 802 -hsync +vsync
(**) CIRRUS(0): Default mode "1280x768": 95.0 MHz, 56.0 kHz, 70.0 Hz
(II) CIRRUS(0): Modeline "1280x768" 94.98 1280 1352 1488 1696 768 769 772 800 -hsync +vsync
(**) CIRRUS(0): Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
(**) CIRRUS(0): Default mode "1280x720": 110.0 MHz, 64.3 kHz, 85.0 Hz
(II) CIRRUS(0): Modeline "1280x720" 110.01 1280 1360 1496 1712 720 721 724 756 -hsync +vsync
(**) CIRRUS(0): Default mode "1280x720": 95.7 MHz, 56.4 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1280x720" 95.65 1280 1352 1488 1696 720 721 724 752 -hsync +vsync
(**) CIRRUS(0): Default mode "1280x720": 89.0 MHz, 52.5 kHz, 70.0 Hz
(II) CIRRUS(0): Modeline "1280x720" 89.04 1280 1352 1488 1696 720 721 724 750 -hsync +vsync
(**) CIRRUS(0): Default mode "1280x720": 74.5 MHz, 44.8 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "1280x720" 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
(**) CIRRUS(0): Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) CIRRUS(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) CIRRUS(0): Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) CIRRUS(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) CIRRUS(0): Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) CIRRUS(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) CIRRUS(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) CIRRUS(0): Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) CIRRUS(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) CIRRUS(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) CIRRUS(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) CIRRUS(0): Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) CIRRUS(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) CIRRUS(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) CIRRUS(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) CIRRUS(0): Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) CIRRUS(0): Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) CIRRUS(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) CIRRUS(0): Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) CIRRUS(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) CIRRUS(0): Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) CIRRUS(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) CIRRUS(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) CIRRUS(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) CIRRUS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) CIRRUS(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) CIRRUS(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) CIRRUS(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) CIRRUS(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) CIRRUS(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) CIRRUS(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) CIRRUS(0): Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) CIRRUS(0): Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) CIRRUS(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) CIRRUS(0): Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) CIRRUS(0): Modeline "640x480" 30.24 640 704 768 864 480 483 486 525 -hsync -vsync
(**) CIRRUS(0): Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) CIRRUS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) CIRRUS(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) CIRRUS(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) CIRRUS(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) CIRRUS(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 -hsync -vsync
(**) CIRRUS(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) CIRRUS(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync
(**) CIRRUS(0): Driver mode "720x400": 35.5 MHz, 39.4 kHz, 87.8 Hz
(II) CIRRUS(0): Modeline "720x400" 35.50 720 738 846 900 400 421 423 449 -hsync -vsync
(**) CIRRUS(0): Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) CIRRUS(0): Modeline "720x400" 28.32 720 738 846 900 400 412 414 449 -hsync +vsync
(**) CIRRUS(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) CIRRUS(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) CIRRUS(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) CIRRUS(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) CIRRUS(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) CIRRUS(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) CIRRUS(0): Display dimensions: (370, 280) mm
(**) CIRRUS(0): DPI set to (87, 69)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfa00a000 - 0xfa00afff (0x1000) MX[b]
[1] 0 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfa000000 - 0xfa007fff (0x8000) MX[b]
[7] -1 0 0xfa100000 - 0xfa1fffff (0x100000) MX[b]
[8] -1 0 0xfa00c000 - 0xfa00cfff (0x1000) MX[b]
[9] -1 0 0xfa009000 - 0xfa009fff (0x1000) MX[b]
[10] -1 0 0xfa00b400 - 0xfa00b4ff (0x100) MX[b]
[11] -1 0 0xfa008000 - 0xfa008fff (0x1000) MX[b]
[12] -1 0 0xfa00b000 - 0xfa00b0ff (0x100) MX[b]
[13] -1 0 0xfa400000 - 0xfa3fffff (0x0) MX[b]O
[14] -1 0 0xfa00a000 - 0xfa00afff (0x1000) MX[b](B)
[15] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00001080 - 0x0000109f (0x20) IX[b]
[22] -1 0 0x00001050 - 0x0000105f (0x10) IX[b]
[23] -1 0 0x00001060 - 0x0000107f (0x20) IX[b]
[24] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[25] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(==) CIRRUS(0): Write-combining range (0xfc000000,0x200000)
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) CIRRUS(0): Using 51 lines for offscreen memory
(II) CIRRUS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
(==) CIRRUS(0): Silken mouse enabled
(**) Option "dpms"
(**) CIRRUS(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules//extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard0: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
(II) Mouse0: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "built-ins" refcount is 2, should be 1; fixing.
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) No APM support in BIOS or kernel
(==) CIRRUS(0): Write-combining range (0xfc000000,0x200000)
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) CIRRUS(0): Using 51 lines for offscreen memory
(**) CIRRUS(0): DPMS enabled
(==) RandR enabled
(II) AIGLX: Screen 0 is not DRI capable
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
(II) Mouse0: ps2EnableDataReporting: succeeded

Fatal server error:
could not open default font 'fixed'
============================================

Since it appears there is a missing font? That causes the rhgb to crash?

Looking in the /etc/X11/fontspath.d directory, I did find three font files in red,
so the question is, are these file symlinks normal even when they don't actually
point to a directory? For example, the directory: /usr/share/X11/fonts/100dpi
exist, but not /usr/share/X11/fonts/100dpi:unscaled

Directory: /etc/X11/fontspath.d:
============================================
lrwxrwxrwx 1 root root 36 2007-11-02 07:24 xorg-x11-fonts-100dpi:unscaled:pri=30 -> /usr/share/X11/fonts/100dpi:unscaled
lrwxrwxrwx 1 root root 35 2007-12-06 15:32 xorg-x11-fonts-75dpi:unscaled:pri=20 -> /usr/share/X11/fonts/75dpi:unscaled
lrwxrwxrwx 1 root root 34 2007-11-02 07:24 xorg-x11-fonts-misc:unscaled:pri=10 -> /usr/share/X11/fonts/misc:unscaled

Can any kind soul please help?

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.17.6/1192 - Release Date: 12/21/2007 1:17 PM


--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

"Tod Merley" 12-23-2007 11:24 AM

rhgb problems @ boot time
 
On Dec 22, 2007 3:35 PM, Daniel B. Thurman <dant@cdkkt.com> wrote:
>
> For some reason log after post install of Fedora 8, the services-loading gui screen stopped
> working. What you get just after a udev is a X11-busy-watch flash(instead of a gnome cursor
> with a blue spinner), then it continues back in text-mode remounting / as rw, mounting
> the local filesystems, enabling quota, and enabling the swap partition. At that point, after
> several minutes go by, the gnome login screen appears. It all works fine, except for the
> missing services-loading screen.
>
> At this point, I am unable to fix the services loading screen and it appears that this screen
> attempts to get started by rhgb? I peered into the /etc/rhgb/temp directory and found
> the xorg.log file there. The contents of this file is dumped below.
>
> Please note the first 3 lines at the top. Seems that there is a problem there
> somehow. I think there might be a minor problem with ACPI; selinux is avc denied
> access to the ACPI socket. Finally, the very end of this log show a failure to find
> a 'fixed' font and the X/rhgb crashes?
>
> File: /etc/rhgb/temp/xorg.log

Hi Daniel B. Thurman,

Your answer may be somewhere here:

/usr/share/doc/rhgb-0.17.6/HOW_IT_WORKS

I think I would:

1. Google the first lines of the xorg.log file. Take sections of the
lines which look to be likely common in all cases and add say "xorg"
or "X" or "X11". You might do well to do a "relabel on next reboot"
from System > Administration > SELinux Management.

2. I note that there are many, many "not using" lines in the file
which speak of screen resolutions and other things. My thinking here
is that I cannot find the dpi:unscaled files ether (I am using FC7
and that may well be why) but perhaps it would not need such a file if
another resolution was in use. You might consider making a simple
xorg.conf file and placing it at /etc/rhgb as proscribed below (from
above mentioned doc):
-------------------------------------------------
If a specific /etc/rhgb/xorg.conf configuration file for X under rhgb
is provided then it will be passed to the X command line to allow
a specific configuration for X boot.
-------------------------------------------------

Good Hunting!

Tod

--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

"Daniel B. Thurman" 12-23-2007 10:20 PM

rhgb problems @ boot time
 
Tod Merley wrote:
>On Dec 22, 2007 3:35 PM, Daniel B. Thurman <dant@cdkkt.com> wrote:
>> For some reason log after post install of Fedora 8, the
>services-loading gui screen stopped
>> working. What you get just after a udev is a X11-busy-watch
> flash(instead of a gnome cursor
>> with a blue spinner), then it continues back in text-mode
>remounting / as rw, mounting
>> the local filesystems, enabling quota, and enabling the swap
>partition. At that point, after
>> several minutes go by, the gnome login screen appears. It
>all works fine, except for the
>> missing services-loading screen.
>>
>> At this point, I am unable to fix the services loading
>screen and it appears that this screen
>> attempts to get started by rhgb? I peered into the
>/etc/rhgb/temp directory and found
>> the xorg.log file there. The contents of this file is dumped below.
>>
>> Please note the first 3 lines at the top. Seems that there
>is a problem there
>> somehow. I think there might be a minor problem with ACPI;
>selinux is avc denied
>> access to the ACPI socket. Finally, the very end of this
>log show a failure to find
>> a 'fixed' font and the X/rhgb crashes?
>>
>> File: /etc/rhgb/temp/xorg.log
>
>Hi Daniel B. Thurman,
>
>Your answer may be somewhere here:
>
>/usr/share/doc/rhgb-0.17.6/HOW_IT_WORKS
>
>I think I would:
>
>1. Google the first lines of the xorg.log file. Take sections of the
>lines which look to be likely common in all cases and add say "xorg"
>or "X" or "X11". You might do well to do a "relabel on next reboot"
>from System > Administration > SELinux Management.
>
>2. I note that there are many, many "not using" lines in the file
>which speak of screen resolutions and other things. My thinking here
>is that I cannot find the dpi:unscaled files ether (I am using FC7
>and that may well be why) but perhaps it would not need such a file if
>another resolution was in use. You might consider making a simple
>xorg.conf file and placing it at /etc/rhgb as proscribed below (from
>above mentioned doc):
>-------------------------------------------------
>If a specific /etc/rhgb/xorg.conf configuration file for X under rhgb
>is provided then it will be passed to the X command line to allow
>a specific configuration for X boot.
>-------------------------------------------------
>
>Good Hunting!

Thanks for the tips! It helped me to focus better!

FYI: I have run out of space for the root partition, and
I have moved the /usr/share directory into a new partition
and wanted to mount the share partition onto /usr/share.

What I discovered was that rhgb was failing @ boot time
because just after the udev step, only the read-only root
partition was mounted which means my /usr/share directory
was unmounted and empty. This caused rhgb to become crippled.
It would be neat if I could change the /etc/rc.sysinit so
that I could force a mount of the share partition to
/usr/share on the read-only root(/) filesystem, but I
don't think that is possible or is it?

Interestingly, rhgb's /etc/rhgb/temp/xorg.log reports that
it was unable to connect to acpi sockets on a read-only root
filesystem, which is odd but harmless or so it seems.

So armed with the above information, I had proceeded to boot
my system into single user mode. Once in single user mode, I had
unmounted my /usr/share directory so that the /usr/share directory
is empty. I then remounted the share drive to /mnt so that once
mounted, I can tar copy the minimum needed directories and files
out of the /mnt/share directory into the empty /usr/share directory
required for rhgb to function.

I had copied over the following directories:
fonts, gdm, icons, locale, rhgb, X11, xdb, xorg

There are probably some other directories needed (the font and
the general look of the progress bar/gui is different, but it
is agreeable for now), and when I rebooted, rhgb now works!

Of course, updates could become a problem.

The bottom line is, I think, that rhgb ought to have its dependencies
placed strategically into the root partition somewhere "permenant",
probably not in /usr/share so that it is possible to allow /usr/share
to be moved into another partition without consequences? I can easily
see that /usr/share and /var can get full pretty quickly and that
can become an administrative issue if these directories cannot be
easily managed.

Of course, none of this is a problem if you have a big enough drive
but expect major parts of the root filesystem to become more monolithic;
just don't plan to move /usr or it's subdirectories nor /var into seperate
partitions without consequences, or so it seems.

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.17.6/1193 - Release Date: 12/22/2007 2:02 PM


--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

"Tod Merley" 12-23-2007 11:15 PM

rhgb problems @ boot time
 
On Dec 23, 2007 3:20 PM, Daniel B. Thurman <dant@cdkkt.com> wrote:
>
------------------------->
>
> Thanks for the tips! It helped me to focus better!
>
> FYI: I have run out of space for the root partition, and
> I have moved the /usr/share directory into a new partition
> and wanted to mount the share partition onto /usr/share.
>
> What I discovered was that rhgb was failing @ boot time
> because just after the udev step, only the read-only root
> partition was mounted which means my /usr/share directory
> was unmounted and empty. This caused rhgb to become crippled.
> It would be neat if I could change the /etc/rc.sysinit so
> that I could force a mount of the share partition to
> /usr/share on the read-only root(/) filesystem, but I
> don't think that is possible or is it?
>
> Interestingly, rhgb's /etc/rhgb/temp/xorg.log reports that
> it was unable to connect to acpi sockets on a read-only root
> filesystem, which is odd but harmless or so it seems.
>
> So armed with the above information, I had proceeded to boot
> my system into single user mode. Once in single user mode, I had
> unmounted my /usr/share directory so that the /usr/share directory
> is empty. I then remounted the share drive to /mnt so that once
> mounted, I can tar copy the minimum needed directories and files
> out of the /mnt/share directory into the empty /usr/share directory
> required for rhgb to function.
>
> I had copied over the following directories:
> fonts, gdm, icons, locale, rhgb, X11, xdb, xorg
>
> There are probably some other directories needed (the font and
> the general look of the progress bar/gui is different, but it
> is agreeable for now), and when I rebooted, rhgb now works!
>
> Of course, updates could become a problem.
>
> The bottom line is, I think, that rhgb ought to have its dependencies
> placed strategically into the root partition somewhere "permenant",
> probably not in /usr/share so that it is possible to allow /usr/share
> to be moved into another partition without consequences? I can easily
> see that /usr/share and /var can get full pretty quickly and that
> can become an administrative issue if these directories cannot be
> easily managed.
>
> Of course, none of this is a problem if you have a big enough drive
> but expect major parts of the root filesystem to become more monolithic;
> just don't plan to move /usr or it's subdirectories nor /var into seperate
> partitions without consequences, or so it seems.
>

Hi Daniel B. Thurman!

I really have spent little time with making fedora spread it's HD
needs over several drives. Two things occur to me as possibly
relivant, however:

1. What was in /etc/fstab when you tried the separate drive for /usr/share?

2. LVM??

I am afraid that I have experiance in neither.

Have fun!

Tod

--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list


All times are GMT. The time now is 11:41 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.