On Sun, Jan 10, 2010 at 10:57 AM, Weiwei Wang <ww.wang.cs@gmail.com> wrote:

>
> On Sun, Jan 10, 2010 at 10:48 AM, Jeroen Op 't Eynde <jeroen@xprsyrslf.be>wrote:
>
>> On Sun, 10 Jan 2010 03:42:55 +0100, Weiwei Wang <ww.wang.cs@gmail.com>
>> wrote:
>>
>> Thanks Jeroen.
>>>
>>> My situation is that in the windows system the guest user is available,
>>> so
>>> other windows users can connect to this printer very easily.
>>>
>>> My problem is what username and password I should provide? and I was also
>>> prompted to enter the domain name. The windows server is in the group
>>> MSHOME, so I should type MSHOME as the domain?
>>>
>>> I tried to type MSHOME and a windows username and password to access
>>> smb://www-pc/hpLaserJ but failed to connect it from nautils.
>>>
>>> Any more advice?
>>>
>>>
>>>
>>>
>> Again, don't start your e-mail on to top of another, start below the
>> reply.
>>
>> It is normal that you can't connect from nautilus, it ain't a folder.
>> Start reading the wiki's again and search for your answers on the forums.
>> DIY, that's what Arch is about.
>>
>> Again, don't start your e-mail on to top of another, start below the
>> reply.
>>
>>
>>
>> --
>> Jeroen Op 't Eynde
>> jeroen@xprsyrslf.be
>> http://xprsyrslf.be
>>
>
> Got it, thanks Jeroen.
>
> --
> Weiwei Wang
> Alex Wang
> 王��
> Room 403, Mengmin Wei Building
> Computer Science Department
> Gulou Campus of Nanjing University
> Nanjing, P.R.China, 210093
>
> Homepage: http://cs.nju.edu.cn/rl/weiweiwang
>

I made it using smb://usernameassword@MSHOME/www-pc/hpLaserJ.

The mistake I've been making is that I always tried to connect the printer
from nautilus.

Thanks Jeroen and Dimitrios~
--
Weiwei Wang
Alex Wang
王��
Room 403, Mengmin Wei Building
Computer Science Department
Gulou Campus of Nanjing University
Nanjing, P.R.China, 210093

Homepage: http://cs.nju.edu.cn/rl/weiweiwang

Dear list -

As I understand, the newest version of CUPS is buggy. I cannot print
from my Okidata 10ex. What can I do?


Thanks.

Ethan



--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Archive: 0LZU00B5CRT33B00@mta5.srv.hcvlny.cv.net">http://lists.debian.org/0LZU00B5CRT33B00@mta5.srv.hcvlny.cv.net

On Thu 23 Feb 2012 at 10:46:03 -0500, Ethan Rosenberg wrote:

> As I understand, the newest version of CUPS is buggy. I cannot print
> from my Okidata 10ex. What can I do?

This bugginess - is it a reference to the two reported Severity: grave
bugs? If you could print before (you don't say) there may be a
connection but what you could do is download packages from testing and
install with 'dpkg -i'.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120223163445.GB8580@desktop">http://lists.debian.org/20120223163445.GB8580@desktop

At 11:34 AM 2/23/2012, Brian wrote:

On Thu 23 Feb 2012 at 10:46:03 -0500, Ethan Rosenberg wrote:

> As I understand, the newest version of CUPS is buggy. I cannot print
> from my Okidata 10ex. What can I do?

This bugginess - is it a reference to the two reported Severity: grave
bugs? If you could print before (you don't say) there may be a
connection but what you could do is download packages from testing and
install with 'dpkg -i'.

Brian -

1] Here is the error log:

rosenberg:/var/log/cups# cat error_log
E [22/Feb/2012:08:02:10 -0500] Filter "hpgltops" not found.
E [22/Feb/2012:08:02:10 -0500] Filter "pstoraster" not found.
E [22/Feb/2012:08:02:10 -0500] Filter "oopstops" not found.
W [22/Feb/2012:08:02:10 -0500] failed to CreateProfile:
org.freedesktop.ColorManager.AlreadyExistsrofile id
'OkiPage-Gray..' already exists
W [22/Feb/2012:08:02:10 -0500] failed to CreateDevice:
org.freedesktop.ColorManager.AlreadyExists:device id 'cups-OkiPage'
already exists

rosenberg:/var/log/cups#


2] How do I download from testing? I am running sid.

Ethan




--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Archive: 0LZV00C1Z3NI6780@mta6.srv.hcvlny.cv.net">http://lists.debian.org/0LZV00C1Z3NI6780@mta6.srv.hcvlny.cv.net

On Thu 23 Feb 2012 at 15:01:45 -0500, Ethan Rosenberg wrote:

> rosenberg:/var/log/cups# cat error_log
> E [22/Feb/2012:08:02:10 -0500] Filter "hpgltops" not found.
> E [22/Feb/2012:08:02:10 -0500] Filter "pstoraster" not found.
> E [22/Feb/2012:08:02:10 -0500] Filter "oopstops" not found.

None of these filters are in testing or unstable so one must wonder why
CUPS is looking for them. oopstops has been removed completely (see the
Debian changelog) ; what has happened to the other two I don't know. Bug
#638933 mentions an iffy fix.

Is the installation a new or upgraded one? Was printing previously in a
working state?

You could completely purge CUPS and all its related packages. Then
reinstall (with the Recommends and install your printer.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120224004058.GE8580@desktop">http://lists.debian.org/20120224004058.GE8580@desktop

At 07:40 PM 2/23/2012, Brian wrote:

On Thu 23 Feb 2012 at 15:01:45 -0500, Ethan Rosenberg wrote:

> rosenberg:/var/log/cups# cat error_log
> E [22/Feb/2012:08:02:10 -0500] Filter "hpgltops" not found.
> E [22/Feb/2012:08:02:10 -0500] Filter "pstoraster" not found.
> E [22/Feb/2012:08:02:10 -0500] Filter "oopstops" not found.

None of these filters are in testing or unstable so one must wonder why
CUPS is looking for them. oopstops has been removed completely (see the
Debian changelog) ; what has happened to the other two I don't know. Bug
#638933 mentions an iffy fix.

Is the installation a new or upgraded one? Was printing previously in a
working state?

You could completely purge CUPS and all its related packages. Then
reinstall (with the Recommends and install your printer.


Brian -

Thanks.

The printer was working. After a upgrade, it stopped printing.


You could completely purge CUPS and all its related packages. Then
reinstall (with the Recommends and install your printer.


I need instructions how to do it.

Thanks again.

Ethan




--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Archive: 0LZV00AZUHX1IJH0@mta6.srv.hcvlny.cv.net">http://lists.debian.org/0LZV00AZUHX1IJH0@mta6.srv.hcvlny.cv.net

On Thu 23 Feb 2012 at 20:10:11 -0500, Ethan Rosenberg wrote:

>> You could completely purge CUPS and all its related packages. Then
>> reinstall (with the Recommends and install your printer.
>
> I need instructions how to do it.

Backup /etc/cups first.

apt-get purge cups

followed by

apt-get --purge autoremove

Unless you have set up your system not to, you'll get the recommended
packages with

apt-get install cups

Installing the printer is done from Administration at

http://localhost:631

There is a CUPS+Gutenprint driver for your Oki, or you could try one of
those under Generic. I'm not a great believer in reinstalling as a cure
for problems, so you could try this last step first.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20120224160557.GG8580@desktop">http://lists.debian.org/20120224160557.GG8580@desktop

At 11:05 AM 2/24/2012, Brian wrote:

On Thu 23 Feb 2012 at 20:10:11 -0500, Ethan Rosenberg wrote:

>> You could completely purge CUPS and all its related packages. Then
>> reinstall (with the Recommends and install your printer.
>
> I need instructions how to do it.

Backup /etc/cups first.

apt-get purge cups

followed by

apt-get --purge autoremove

Unless you have set up your system not to, you'll get the recommended
packages with

apt-get install cups

Installing the printer is done from Administration at

http://localhost:631

There is a CUPS+Gutenprint driver for your Oki, or you could try one of
those under Generic. I'm not a great believer in reinstalling as a cure
for problems, so you could try this last step first.


=============
Brian -

Thanks.

I trioed purging and reinstalling. No luck.

If this helps...

When I restart the computer, the last job I sent to the printer will print.

Ethan




--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Archive: 0M06009DUC0Q7L20@mta6.srv.hcvlny.cv.net">http://lists.debian.org/0M06009DUC0Q7L20@mta6.srv.hcvlny.cv.net

At 11:05 AM 2/24/2012, Brian wrote:

On Thu 23 Feb 2012 at 20:10:11 -0500, Ethan Rosenberg wrote:

>> You could completely purge CUPS and all its related packages. Then
>> reinstall (with the Recommends and install your printer.
>
> I need instructions how to do it.

Backup /etc/cups first.

apt-get purge cups

followed by

apt-get --purge autoremove

Unless you have set up your system not to, you'll get the recommended
packages with

apt-get install cups

Installing the printer is done from Administration at

http://localhost:631

There is a CUPS+Gutenprint driver for your Oki, or you could try one of
those under Generic. I'm not a great believer in reinstalling as a cure
for problems, so you could try this last step first.


=============
Brian -

Thanks.

I tried purging and reinstalling. No luck.

If this helps...

When I restart the computer, the last job I sent to the printer will print.

Ethan
=====================

Here is the error log:

W [29/Feb/2012:16:14:07 -0500] failed to CreateDevice:
org.freedesktop.ColorManager.AlreadyExists:device id
'cups-OkiData10ex' already exists
W [29/Feb/2012:16:14:07 -0500] failed to CreateProfile:
org.freedesktop.ColorManager.AlreadyExistsrofile id
'OkiData10ex-Gray..' already exists
W [29/Feb/2012:16:14:07 -0500] failed to CreateDevice:
org.freedesktop.ColorManager.AlreadyExists:device id
'cups-OkiData10ex' already exists

E [29/Feb/2012:16:14:07 -0500] [Job 2] Aborting job because it has no files.
W [29/Feb/2012:16:18:00 -0500] failed to CreateProfile:
org.freedesktop.ColorManager.AlreadyExistsrofile id
'OkiData10ex-Gray..' already exists
W [29/Feb/2012:16:18:00 -0500] failed to CreateDevice:
org.freedesktop.ColorManager.AlreadyExists:device id
'cups-OkiData10ex' already exists
W [29/Feb/2012:16:18:00 -0500] failed to CreateProfile:
org.freedesktop.ColorManager.AlreadyExistsrofile id
'OkiData10ex-Gray..' already exists
W [29/Feb/2012:16:18:00 -0500] failed to CreateDevice:
org.freedesktop.ColorManager.AlreadyExists:device id
'cups-OkiData10ex' already exists
E [29/Feb/2012:16:18:46 -0500] Avahi client failed, closing client to
allow a clean restart
W [29/Feb/2012:16:21:44 -0500] failed to CreateProfile:
org.freedesktop.DBus.Error.NoReplyid not receive a reply. Possible
causes include: the remote application did not send a reply, the
message bus security policy blocked the reply, the reply timeout
expired, or the network connection was broken.


Hope it helps.

Ethan





--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Archive: 0M06005DRIHA6N00@mta2.srv.hcvlny.cv.net">http://lists.debian.org/0M06005DRIHA6N00@mta2.srv.hcvlny.cv.net

> W [29/Feb/2012:16:14:07 -0500] failed to CreateDevice:
> org.freedesktop.ColorManager.AlreadyExists:device id
> 'cups-OkiData10ex' already exists

humm..now that you've tried everything else, try installing:

cups-bsd

can't hurt.

--
CK


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 9raluhFh51U1@mid.individual.net">http://lists.debian.org/9raluhFh51U1@mid.individual.net