FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Fedora Laptop

 
 
LinkBack Thread Tools
 
Old 11-23-2007, 09:15 PM
smartkenny
 
Default Suspend succeed, wake up lost screen

Hi, all

Fedora 8 on my Acer Aspire 1681 has problem to suspend/wake up.
Actually, it suspend successfully, but when wake up, the screen is
completely black. The keyboard works still, because the caps lock LED
works. I can ssh remote login from other machine, and get the attached
dmesg output.

I am using 915resolution+i810 drv to support my 1280x800 resolution. I
did try intel drv which actually is the default when install Fedora 8,
but the problem is when wake up, the screen is also complete black, plus
the keyboard doesn't respond.

Any suggestion? I hope the dmesg output can help the developers to
improve the suspending.

Thank.
Kenny

Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 21:41:26 EST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000004dee0000 (usable)
BIOS-e820: 000000004dee0000 - 000000004deec000 (ACPI data)
BIOS-e820: 000000004deec000 - 000000004df00000 (ACPI NVS)
BIOS-e820: 000000004df00000 - 0000000050000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
350MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 319200) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 319200
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 319200
On node 0 totalpages: 319200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 701 pages used for memmap
HighMem zone: 89123 pages, LIFO batch:15
Movable zone: 0 pages used for memmap
DMI present.
Using APIC driver default
ACPI: RSDP 000F62E0, 0014 (r0 ACER )
ACPI: RSDT 4DEE66D8, 0030 (r1 ACER Kestrel 20020806 LTP 0)
ACPI: FACP 4DEEBF2C, 0074 (r1 ACER Kestrel 20020806 PTL 50)
ACPI: DSDT 4DEE6708, 5824 (r1 ACER Kestrel 20020806 MSFT 100000E)
ACPI: FACS 4DEFCFC0, 0040
ACPI: HPET 4DEEBFA0, 0038 (r1 ACER Kestrel 20020806 PTL 0)
ACPI: BOOT 4DEEBFD8, 0028 (r1 ACER Kestrel 20020806 LTP 1)
ACPI: PM-Timer IO Port: 0x1008
ACPI: HPET id: 0x8086a201 base: 0x0
Allocating PCI resources starting at 60000000 (gap: 50000000:aec10000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 316707
Kernel command line: ro root=LABEL=/1 rhgb quiet
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (019d0000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07a8000 soft=c0788000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1498.768 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1257652k/1276800k available (2184k kernel code, 18184k reserved, 1116k data, 280k init, 359296k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc073f000 - 0xc0785000 ( 280 kB)
.data : 0xc0622165 - 0xc0739544 (1116 kB)
.text : 0xc0400000 - 0xc0622165 (2184 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 2998.57 BogoMIPS (lpj=1499288)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9ff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f1ff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0440)
CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=1552 bytes
Booting paravirtualized kernel on bare hardware
Time: 21:42:00 Date: 11/23/07
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd792, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
Force enabled HPET at base address 0xfed00000
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *6)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
ACPI: PCI Interrupt Link [LNKD] (IRQs *6)
ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PFN1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Time: tsc clocksource has been installed.
pnp: 00:04: ioport range 0x164e-0x164f has been reserved
pnp: 00:04: iomem range 0xfec10000-0xfec1ffff could not be reserved
pnp: 00:04: iomem range 0xff800000-0xffbfffff could not be reserved
pnp: 00:04: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:04: iomem range 0x0-0x9ffff could not be reserved
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 60000000-63ffffff
MEM window: 68000000-6bffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: e0200000-e05fffff
PREFETCH window: 60000000-65ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:02:06.0 (0104 -> 0107)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2908k freed
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1195854120.465:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key D5E5FC8EDCF186B6
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Transitioning device [FAN0] to D3
ACPI: Transitioning device [FAN0] to D3
ACPI: Fan [FAN0] (off)
ACPI: Transitioning device [FAN1] to D3
ACPI: Transitioning device [FAN1] to D3
ACPI: Fan [FAN1] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (65 C)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected an Intel 855GM Chipset.
agpgart: Detected 32636K stolen memory.
agpgart: AGP aperture is 128M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.6[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:02:06.0 [1025:0064]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01a21b22, devctl 0x64
Yenta: ISA IRQ mask 0x08f8, PCI irq 10
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe05fffff
pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x65ffffff
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 15:671:753
Freeing unused kernel memory: 280k freed
Write protecting the kernel read-only data: 845k
Marking TSC unstable due to: TSC halts in idle.
Time: hpet clocksource has been installed.
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
SCSI subsystem initialized
libata version 2.21 loaded.
input: SynPS/2 Synaptics TouchPad as /class/input/input2
usb 3-1: new low speed USB device using uhci_hcd and address 2
ata_piix 0000:00:1f.1: version 2.12
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
ata1.00: ATA-6: IC25N080ATMR04-0, MO4OAD4A, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
usb 3-1: configuration #1 chosen from 1 choice
ata1.00: configured for UDMA/100
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
input: Logitech USB Receiver as /class/input/input4
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1
ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW242C, UQ81, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA IC25N080ATMR04-0 MO4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW242C UQ81 PQ: 0 ANSI: 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1195854126.677:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 8 users, 11 roles, 2359 types, 112 bools, 1 sens, 1024 cats
security: 67 classes, 212240 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1195854127.304:3): policy loaded auid=4294967295
sr0: scsi3-mmc drive: 4x/4x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:00:1f.3[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input7
ACPI: Sleep Button (CM) [SLPB]
input: PC Speaker as /class/input/input8
input: Video Bus as /class/input/input9
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
intel_rng: FWH not detected
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ACPI: Smart Battery System [SMBC]: AC Adapter [AC0] (on-line)
ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
NET: Registered protocol family 23
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x164e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc, Found chip at base=0x164e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
pnp: Device 00:08 disabled.
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
net eth1: device_rename: sysfs_create_symlink failed (-17)
udev: renamed network interface eth0 to eth1
ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:7f:82:b8
ACPI: PCI Interrupt 0000:02:06.2[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ACPI: Smart Battery System [SMBC]: Battery Slot [BAT0] (battery present)
firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI version 1.10
ACPI: Smart Battery System [SMBC]: Battery Slot [BAT1] (battery present)
ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
firewire_core: created new fw device fw0 (0 config rom retries, S400)
intel8x0_measure_ac97_clock: measured 50388 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
MC'97 0 converters and GPIO not ready (0x1)
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1341388k swap on /dev/sda6. Priority:-1 extents:1 across:1341388k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ip6_tables: (C) 2000-2006 Netfilter Core Team
Clocksource tsc unstable (delta = -86144737 ns)
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth0: no IPv6 routers present
audit(1195854165.563:4): audit_pid=2065 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
ttyS1: LSR safety check engaged!
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized i915 1.6.0 20060119 on minor 0
[drm] Initialized i915 1.6.0 20060119 on minor 1
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
PM: Preparing system for mem sleep
Stopping tasks ... done.
PM: Entering mem sleep
Suspending console(s)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:02:06.3 disabled
ACPI handle has no context!
eth1: Going into suspend...
ACPI: PCI interrupt for device 0000:02:04.0 disabled
ACPI: PCI interrupt for device 0000:02:02.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ipw2200: Unable to load ucode: -22
ipw2200: Unable to load firmware: -22
ipw2200: Failed to up device
Disabling non-boot CPUs ...
cpufreq: suspend failed to assert current frequency is what timing core thinks it is.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
cpufreq: resume failed to assert current frequency is what timing core thinks it is.
Force enabled HPET at resume
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: PCI Interrupt 0000:00:1f.6[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
PCI: Enabling device 0000:02:02.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
eth1: Coming out of suspend...
PCI: Enabling device 0000:02:04.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
pnp: Failed to activate device 00:06.
pnp: Failed to activate device 00:07.
sd 0:0:0:0: [sda] Starting disk
ata1.00: ACPI cmd 03/45:00:00:00:a0:ef failed (Emask=0x1 Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/0c:00:00:00:a0:ef failed (Emask=0x1 Stat=0x51 Err=0x04)
ata1.00: revalidation failed (errno=-5)
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: ACPI cmd 03/45:00:00:00:a0:ef failed (Emask=0x1 Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/0c:00:00:00:a0:ef failed (Emask=0x1 Stat=0x51 Err=0x04)
ata1.00: ACPI on devcfg failed the second time, disabling (errno=-5)
ata1.00: revalidation failed (errno=1)
ata1: failed to recover some devices, retrying in 5 secs
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
ipw2200: Unable to load firmware: -2
ata2.00: ACPI cmd 03/42:00:00:00:a0:ef failed (Emask=0x1 Stat=0x51 Err=0x04)
ata2.00: ACPI cmd 00/0c:00:00:00:a0:ef failed (Emask=0x1 Stat=0x51 Err=0x04)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Finishing wakeup.
Restarting tasks ... <6>usb 3-1: USB disconnect, address 2
done.
usb 3-1: new low speed USB device using uhci_hcd and address 3
usb 3-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input10
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
input: Logitech USB Receiver as /class/input/input11
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1
ADDRCONF(NETDEV_UP): eth0: link is not ready
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ata2.00: ACPI cmd 03/42:00:00:00:a0:ef failed (Emask=0x1 Stat=0x51 Err=0x04)
ata2.00: ACPI cmd 00/0c:00:00:00:a0:ef failed (Emask=0x1 Stat=0x51 Err=0x04)
ata2.00: ACPI on devcfg failed the second time, disabling (errno=-5)
ata2.00: revalidation failed (errno=1)
ata2: failed to recover some devices, retrying in 5 secs
ata2.00: configured for UDMA/33
atkbd.c: Unknown key pressed (translated set 2, code 0xa9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e029 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xa9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e029 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xa9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e029 <keycode>' to make it known.
eth0: no IPv6 routers present
atkbd.c: Unknown key released (translated set 2, code 0xa9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e029 <keycode>' to make it known.
PM: Preparing system for mem sleep
Stopping tasks ... done.
PM: Entering mem sleep
Suspending console(s)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:02:06.3 disabled
ACPI handle has no context!
eth1: Going into suspend...
ACPI: PCI interrupt for device 0000:02:04.0 disabled
ACPI: PCI interrupt for device 0000:02:02.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Disabling non-boot CPUs ...
cpufreq: suspend failed to assert current frequency is what timing core thinks it is.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
cpufreq: resume failed to assert current frequency is what timing core thinks it is.
Force enabled HPET at resume
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: PCI Interrupt 0000:00:1f.6[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
PCI: Enabling device 0000:02:02.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
eth1: Coming out of suspend...
PCI: Enabling device 0000:02:04.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
pnp: Failed to activate device 00:06.
pnp: Failed to activate device 00:07.
ata2.00: configured for UDMA/33
sd 0:0:0:0: [sda] Starting disk
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Finishing wakeup.
Restarting tasks ... <6>usb 3-1: USB disconnect, address 3
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
done.
usb 3-1: new low speed USB device using uhci_hcd and address 4
usb 3-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input12
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
input: Logitech USB Receiver as /class/input/input13
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1
ADDRCONF(NETDEV_UP): eth0: link is not ready
kobject_add failed for vcs63 with -EEXIST, don't try to register things with the same name in the same directory.
[<c04f2c7b>] kobject_shadow_add+0x159/0x18b
[<c04f2f62>] kobject_set_name+0x2b/0x92
[<c05650d0>] device_add+0x87/0x51a
[<c04f2ceb>] kobject_init+0x2f/0x3f
[<c0565ae0>] device_create+0x77/0x97
[<c0548ea8>] vcs_make_sysfs+0x34/0x6e
[<c054deb4>] con_open+0x6f/0x7c
[<c054465a>] tty_open+0x167/0x2b6
[<c0483742>] chrdev_open+0x111/0x14e
[<c04cfb36>] selinux_dentry_open+0x59/0x5e
[<c0483631>] chrdev_open+0x0/0x14e
[<c047f9f5>] __dentry_open+0xd5/0x18c
[<c047fb26>] nameidata_to_filp+0x24/0x33
[<c047fb6c>] do_filp_open+0x37/0x3e
[<c047f8a6>] get_unused_fd_flags+0x52/0xc5
[<c047fbbb>] do_sys_open+0x48/0xca
[<c047fc76>] sys_open+0x1c/0x1e
[<c040518a>] syscall_call+0x7/0xb
[<c0610000>] xfrm_parse_spi+0x3c/0xc8
=======================
kobject_add failed for vcsa63 with -EEXIST, don't try to register things with the same name in the same directory.
[<c04f2c7b>] kobject_shadow_add+0x159/0x18b
[<c04f2f62>] kobject_set_name+0x2b/0x92
[<c05650d0>] device_add+0x87/0x51a
[<c04f2ceb>] kobject_init+0x2f/0x3f
[<c0565ae0>] device_create+0x77/0x97
[<c0548edd>] vcs_make_sysfs+0x69/0x6e
[<c054deb4>] con_open+0x6f/0x7c
[<c054465a>] tty_open+0x167/0x2b6
[<c0483742>] chrdev_open+0x111/0x14e
[<c04cfb36>] selinux_dentry_open+0x59/0x5e
[<c0483631>] chrdev_open+0x0/0x14e
[<c047f9f5>] __dentry_open+0xd5/0x18c
[<c047fb26>] nameidata_to_filp+0x24/0x33
[<c047fb6c>] do_filp_open+0x37/0x3e
[<c047f8a6>] get_unused_fd_flags+0x52/0xc5
[<c047fbbb>] do_sys_open+0x48/0xca
[<c047fc76>] sys_open+0x1c/0x1e
[<c040518a>] syscall_call+0x7/0xb
[<c0610000>] xfrm_parse_spi+0x3c/0xc8
=======================
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
eth0: no IPv6 routers present

_______________________________________________
Fedora-laptop-list mailing list
Fedora-laptop-list@redhat.com
http://www.redhat.com/mailman/listinfo/fedora-laptop-list
 

Thread Tools




All times are GMT. The time now is 03:15 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org