FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Fedora Development

 
 
LinkBack Thread Tools
 
Old 05-21-2008, 05:27 PM
"Aaron Gray"
 
Default controllers DAC960 and sym53c8xx are not detected anymore

Fedora 9 and rawhide are not detecting Mylex DAC960 and LSI Corp. sym53c8xx
SCSI controllers. These devices are detected and run fine on FC 6, 7 and 8.


Attached are :-

- dmesg
- lspci
- cat /proc/interrupts

from FC8 installation.

Thanks,

Aaron
CPU0 CPU1
0: 354 1 IO-APIC-edge timer

1: 296 67 IO-APIC-edge i8042
2: 0 0 XT-PIC-XT cascade
3: 0 2 IO-APIC-edge
4: 0 2 IO-APIC-edge
5: 0 0 IO-APIC-fasteoi uhci_hcd:usb1

8: 0 1 IO-APIC-edge rtc
9: 5543 223 IO-APIC-fasteoi sym53c8xx
11: 8273 3653 IO-APIC-fasteoi Mylex DAC960PRL
12: 5186 91 IO-APIC-edge i8042
14: 0 0 IO-APIC-edge libata
15: 3884 24 IO-APIC-fasteoi libata, eth0
NMI: 0 0 Non-maskable interrupts
LOC: 388697 388592 Local timer interrupts
RES: 2606 4721 Rescheduling interrupts
CAL: 303 91 function call interrupts
TLB: 757 574 TLB shootdowns
TRM: 0 0 Thermal event interrupts
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0

Initializing cgroup subsys cpuset
Linux version 2.6.24.7-92.fc8 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed May 7 16:50:09 EDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e9800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
0MB HIGHMEM available.
512MB LOWMEM available.
found SMP MP-table at 000f6930
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 131072) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131072
HighMem 131072 -> 131072
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131072
On node 0 totalpages: 131072
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125984 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI not present or invalid.
Using APIC driver default
ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: FSCD1031 Product ID: PRIMERGY APIC at: 0xFEE00000
Processor #1 6:7 APIC version 17
Processor #0 6:7 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ea000
swsusp: Registered nosave memory region: 00000000000ea000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07bb000 soft=c079b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 496.044 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 510868k/524288k available (2238k kernel code, 12760k reserved, 1131k data, 288k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
.init : 0xc0750000 - 0xc0798000 ( 288 kB)
.data : 0xc062fa15 - 0xc074a724 (1131 kB)
.text : 0xc0400000 - 0xc062fa15 (2238 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 993.02 BogoMIPS (lpj=496511)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU serial number disabled.
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: Intel Pentium III (Katmai) stepping 03
SMP alternatives: switching to SMP code
Booting processor 1/0 eip 3000
CPU 1 irqstacks, hard=c07bc000 soft=c079c000
Initializing CPU#1
Calibrating delay using timer specific routine.. 991.96 BogoMIPS (lpj=495983)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU serial number disabled.
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Katmai) stepping 03
Total of 2 processors activated (1984.98 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1680 bytes
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
Time: 17:00:15 Date: 05/21/08
NET: Registered protocol family 16
ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread DF820000 could not acquire Mutex [1] [20070126]
No dock devices found.
PCI: PCI BIOS revision 2.10 entry at 0xfd8ea, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region f0c0-f0ff claimed by PIIX4 ACPI
PCI quirk: region f0b0-f0bf claimed by PIIX4 SMB
PCI: Using IRQ router default [110a/0015] at 0000:00:02.0
PCI: Cannot allocate resource region 0 of device 0000:00:02.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:09.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: 2000-2fff
MEM window: f4200000-f43fffff
PREFETCH window: f4400000-f7ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3661k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1211389216.811:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 30F2BA378A37FED9
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:02:00.0
PCI: Firmware left 0000:02:0a.0 e100 interrupts enabled, disabling
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected an Intel 440GX Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 8:336:37
Freeing unused kernel memory: 288k freed
Write protecting the kernel read-only data: 894k
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 5, io base 0x00001400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
input: PS/2 Generic Mouse as /class/input/input2
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
sym0: <895> rev 0x1 at pci 0000:02:01.0 irq 9
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
DAC960: ***** DAC960 RAID Driver Version 2.5.49 of 21 Aug 2007 *****
DAC960: Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
DAC960#0: Configuring Mylex DAC960PRL PCI RAID Controller
DAC960#0: Firmware Version: 4.07-0-29, Channels: 1, Memory Size: 4MB
DAC960#0: PCI Bus: 2, Device: 9, Function: 1, I/O Address: Unassigned
DAC960#0: PCI Address: 0xF4400000 mapped at 0xE0878000, IRQ Channel: 11
DAC960#0: Controller Queue Depth: 124, Maximum Blocks per Command: 128
DAC960#0: Driver Queue Depth: 123, Scatter/Gather Limit: 33 of 33 Segments
DAC960#0: Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
DAC960#0: Physical Devices:
DAC960#0: 0:0 Vendor: SEAGATE Model: ST39175LC Revision: 0359
DAC960#0: Serial Number: 3AL1D3WF00007052LMMW
DAC960#0: Disk Status: Online, 17782784 blocks
DAC960#0: 0:1 Vendor: SEAGATE Model: ST39175LC Revision: 0359
DAC960#0: Serial Number: 3AL12G8600007022HWK2
DAC960#0: Disk Status: Online, 17782784 blocks
DAC960#0: 0:2 Vendor: SEAGATE Model: ST39175LC Revision: 0359
DAC960#0: Serial Number: 3AL1DA6D00007052LPHY
DAC960#0: Disk Status: Online, 17782784 blocks
DAC960#0: 0:3 Vendor: SEAGATE Model: ST39175LC Revision: 0359
DAC960#0: Serial Number: 3AL1D9YN00007101D44R
DAC960#0: Disk Status: Online, 17782784 blocks
DAC960#0: Logical Drives:
DAC960#0: /dev/rd/c0d0: RAID-1, Online, 35565568 blocks, Write Thru
rd/c0d0: p1 p2
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi1 : ata_piix
scsi2 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15
ata2: port disabled. ignoring.
scsi 0:0:5:0: CD-ROM NEC CD-ROM DRIVE:466 1.17 PQ: 0 ANSI: 2
target0:0:5: Beginning Domain Validation
target0:0:5: asynchronous
target0:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
target0:0:5: Domain Validation skipping write tests
target0:0:5: Ending Domain Validation
scsi 0:0:6:0: CD-ROM NEC CD-ROM DRIVE:466 1.17 PQ: 0 ANSI: 2
target0:0:6: Beginning Domain Validation
target0:0:6: asynchronous
target0:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
target0:0:6: Domain Validation skipping write tests
target0:0:6: Ending Domain Validation
scsi: waiting for bus probes to complete ...
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1211389240.052:2): enforcing=1 old_enforcing=0 auid=4294967295
SELinux:8192 avtab hash slots allocated.Num of rules:219453
SELinux:8192 avtab hash slots allocated.Num of rules:219453
security: 8 users, 12 roles, 2390 types, 115 bools, 1 sens, 1024 cats
security: 67 classes, 219453 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
audit(1211389240.998:3): policy loaded auid=4294967295
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:5:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray
sr 0:0:6:0: Attached scsi CD-ROM sr1
sr 0:0:5:0: Attached scsi generic sg0 type 5
sr 0:0:6:0: Attached scsi generic sg1 type 5
input: PC Speaker as /class/input/input3
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100: eth0: e100_probe: addr 0xf4302000, irq 15, MAC addr 00:90:27:fd:34:69
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on rd/c0d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev rd/c0d0p1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1048568k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1048568k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
audit(1211389281.665:4): audit_pid=1739 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present

00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge
00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX AGP bridge
00:02.0 System peripheral: Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller (rev 02)
00:03.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
00:04.0 Class ff00: Siemens Nixdorf AG FSC Copernicus Management Controller (rev 01)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
02:00.0 VGA compatible controller: Cirrus Logic GD 5446 (rev 45)
02:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01)
02:09.0 PCI bridge: Intel Corporation 80960RP (i960RP) Microprocessor/Bridge (rev 05)
02:09.1 RAID bus controller: Mylex Corporation DAC960PG (rev 05)
02:0a.0 Ethernet controller: Intel Corporation 82557/8/9 Ethernet Pro 100 (rev 08)
--
fedora-devel-list mailing list
fedora-devel-list@redhat.com
https://www.redhat.com/mailman/listinfo/fedora-devel-list
 

Thread Tools




All times are GMT. The time now is 08:39 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org