Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Fedora Build System (http://www.linux-archive.org/fedora-build-system/)
-   -   Koji 1.6 - Mock SRPM Build failing - NFS Path - no such file or directory (http://www.linux-archive.org/fedora-build-system/495272-koji-1-6-mock-srpm-build-failing-nfs-path-no-such-file-directory.html)

Ciaran Bryan 02-28-2011 02:15 PM

Koji 1.6 - Mock SRPM Build failing - NFS Path - no such file or directory
 
*

Hi,

*

I have setup a koji server and client builder successfully and can submit koji client commands and issue build tasks successfully.

When an SRPM build task is taken by my builder server (same server as koji-hub/web) the mock buildroot gets setup ok and yum installed the correct build group binary packages etc within the buildroot.

Then as mock goes to build the source RPM it fails as the location of the source RPM is the /mnt/work/cli-build..... NFS folder, but that NFS folder is not mounted to/available within the buildroot.

*

*

How do I make my source rpm available to the mock buildroot environment without using NFS or is my setup wrong ?

*

Thanks,

C.

*

*

My koji build task was submitted as follows:

[kojiadmin@nse-build ~]$ koji build newbay-nse /usr/src/redhat/SRPMS/zookeeper-3.2.2-1.src.rpm

*

Mock output:

*

INFO: mock.py version 1.0.7 starting...

State Changed: init plugins

State Changed: start

State Changed: lock buildroot

State Changed: clean

State Changed: init

State Changed: lock buildroot

Mock Version: 1.0.7

INFO: Mock Version: 1.0.7

State Changed: running yum

INFO: mock.py version 1.0.7 starting...

State Changed: init plugins

State Changed: start

INFO: Start(/mnt/koji/work/cli-build/1298901262.7331891.WlovUVjV/zookeeper-3.2.2-1.src.rpm)* Config(nse-build-41-31)

State Changed: init

State Changed: lock buildroot

Mock Version: 1.0.7

INFO: Mock Version: 1.0.7

State Changed: running yum

State Changed: setup

ERROR: Exception(/mnt/koji/work/cli-build/1298901262.7331891.WlovUVjV/zookeeper-3.2.2-1.src.rpm) Config(nse-build-41-31) 0 minutes 0 seconds

INFO: Results and/or logs in: /var/lib/mock/newbay-nse-build-41-31/result

Traceback (most recent call last):

* File "/usr/sbin/mock", line 693, in ?

*** main(retParams)

* File "/usr/sbin/mock", line 635, in main

*** do_rebuild(config_opts, chroot, args)

* File "<peak.util.decorators.rewrap wrapping __main__.do_rebuild at 0x1BC285F0>", line 3, in do_rebuild

* File "/usr/lib/python2.4/site-packages/mock/trace_decorator.py", line 70, in trace

*** result = func(*args, **kw)

* File "/usr/sbin/mock", line 372, in do_rebuild

*** chroot.build(srpm, timeout=config_opts['rpmbuild_timeout'])

* File "<peak.util.decorators.rewrap wrapping mock.backend.build at 0x1BBE6B90>", line 3, in build

* File "/usr/lib/python2.4/site-packages/mock/trace_decorator.py", line 70, in trace

*** result = func(*args, **kw)

* File "/usr/lib/python2.4/site-packages/mock/backend.py", line 439, in build

*** gid=self.chrootgid,

* File "/usr/lib/python2.4/site-packages/mock/backend.py", line 366, in doChroot

*** shell=shell, *args, **kargs )

* File "<peak.util.decorators.rewrap wrapping mock.util.do at 0x1BBEC500>", line 3, in do

* File "/usr/lib/python2.4/site-packages/mock/trace_decorator.py", line 70, in trace

*** result = func(*args, **kw)

* File "/usr/lib/python2.4/site-packages/mock/util.py", line 299, in do

*** preexec_fn = preexec,

* File "/usr/lib64/python2.4/subprocess.py", line 550, in __init__

*** errread, errwrite)

* File "/usr/lib64/python2.4/subprocess.py", line 996, in _execute_child

*** raise child_exception

OSError: [Errno 2] No such file or directory

*

*





STRICTLY PRIVATE, CONFIDENTIAL AND PRIVILEGED COMMUNICATION.



This message (including attachments) may contain information that is

privileged, confidential or protected from disclosure. They are intended

solely for the use of the intended recipient. If you are not the

intended recipient, you are hereby notified that dissemination,

disclosure, copying, distribution, printing, transmission or use of this

message or any information contained in it is strictly prohibited. If

you have received this message from NewBay Software in error, please

immediately notify the sender by reply email and delete this message

from your computer. The content of this e-mail, and any files

transmitted with it, may have been changed or altered without the

consent of the author. Although we have taken steps to ensure that this

email and attachments are free from any virus, we advise that in keeping

with good computing practice the recipient should ensure they are

actually virus free.




--
buildsys mailing list
buildsys@lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/buildsys

Florian La Roche 02-28-2011 02:41 PM

Koji 1.6 - Mock SRPM Build failing - NFS Path - no such file or directory
 
On Mon, Feb 28, 2011 at 07:15:54AM -0800, Ciaran Bryan wrote:
>
> Hi,
>
> I have setup a koji server and client builder successfully and can submit koji client commands and issue build tasks successfully.
> When an SRPM build task is taken by my builder server (same server as koji-hub/web) the mock buildroot gets setup ok and yum installed the correct build group binary packages etc within the buildroot.
> Then as mock goes to build the source RPM it fails as the location of the source RPM is the /mnt/work/cli-build..... NFS folder, but that NFS folder is not mounted to/available within the buildroot.
>
>
> How do I make my source rpm available to the mock buildroot environment without using NFS or is my setup wrong ?

You can use "topurl" instead of "topdir" to have all accesses done via http
and no NFS mounts necessary. That should be done in /etc/koji.conf and
/etc/kojid/kojid.conf.

I use "topdir=http://koji.example.com/remote-koji" and then
the following as http configuration:
Alias /remote-koji "/mnt/koji"
Alias /packages "/mnt/koji/packages"
Alias /repos "/mnt/koji/repos"
<Directory "/mnt/koji/">
Options Indexes SymLinksIfOwnerMatch
AllowOverride None
Order allow,deny
Allow from all
SetHandler None
IndexOptions NameWidth=* +SuppressDescription +SuppressIcon
</Directory>

regards,

Florian La Roche

--
buildsys mailing list
buildsys@lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/buildsys

Ciaran Bryan 02-28-2011 04:19 PM

Koji 1.6 - Mock SRPM Build failing - NFS Path - no such file or directory
 
Hi,

Thanks for the prompt reply.

I have made the suggested changes and still have a problem with file access, the temp src rpm file is created inside the cli-build work folder and I am able to wget it from the topurl location but get an IO error from kojid

Any ideas ? Does the topurl configuration setting need to be escaped in some way ?

Thanks in advance,
C.


Output of Koji Build - client side
147 build (newbay-nse, zookeeper-3.2.2-1.src.rpm): free -> FAILED: Fault: <Fault 1: 'Traceback (most recent call last):
File "/usr/lib/python2.4/site-packages/koji/daemon.py", line 1114, in runTask
response = (handler.run(),)
File "/usr/lib/python2.4/site-packages/koji/tasks.py", line 146, in run
return self.handler(*self.params,**self.opts)
File "/usr/sbin/kojid", line 731, in handler
h = self.readSRPMHeader(srpm)
File "/usr/sbin/kojid", line 802, in readSRPMHeader
fo = koji.openRemoteFile(relpath, **opts)
File "/usr/lib/python2.4/site-packages/koji/__init__.py", line 1376, in openRemoteFile
fo = open(fn)
IOError: [Errno 2] No such file or directory: 'http://nse-build.nse.newbay.com/remote-koji/work/cli-build/1298912291.2243061.jTHRrzZR/zookeeper-3.2.2-1.src.rpm'
'>
0 free 0 open 0 done 1 failed

>From Kojid.log
2011-02-28 17:03:20,203 [WARNING] koji.TaskManager: TRACEBACK: Traceback (most recent call last):
File "/usr/lib/python2.4/site-packages/koji/daemon.py", line 1114, in runTask
response = (handler.run(),)
File "/usr/lib/python2.4/site-packages/koji/tasks.py", line 146, in run
return self.handler(*self.params,**self.opts)
File "/usr/sbin/kojid", line 731, in handler
h = self.readSRPMHeader(srpm)
File "/usr/sbin/kojid", line 802, in readSRPMHeader
fo = koji.openRemoteFile(relpath, **opts)
File "/usr/lib/python2.4/site-packages/koji/__init__.py", line 1376, in openRemoteFile
fo = open(fn)
IOError: [Errno 2] No such file or directory: 'http://nse-build.nse.newbay.com/remote-koji/work/cli-build/1298912571.03174.jAAvxagc/zookeeper-3.2.2-1.src.rpm'



-----Original Message-----
From: buildsys-bounces@lists.fedoraproject.org [mailto:buildsys-bounces@lists.fedoraproject.org] On Behalf Of Florian La Roche
Sent: 28 February 2011 15:42
To: Discussion of Fedora build system
Subject: Re: Koji 1.6 - Mock SRPM Build failing - NFS Path - no such file or directory

On Mon, Feb 28, 2011 at 07:15:54AM -0800, Ciaran Bryan wrote:
>
> Hi,
>
> I have setup a koji server and client builder successfully and can submit koji client commands and issue build tasks successfully.
> When an SRPM build task is taken by my builder server (same server as koji-hub/web) the mock buildroot gets setup ok and yum installed the correct build group binary packages etc within the buildroot.
> Then as mock goes to build the source RPM it fails as the location of the source RPM is the /mnt/work/cli-build..... NFS folder, but that NFS folder is not mounted to/available within the buildroot.
>
>
> How do I make my source rpm available to the mock buildroot environment without using NFS or is my setup wrong ?

You can use "topurl" instead of "topdir" to have all accesses done via http
and no NFS mounts necessary. That should be done in /etc/koji.conf and
/etc/kojid/kojid.conf.

I use "topdir=http://koji.example.com/remote-koji" and then
the following as http configuration:
Alias /remote-koji "/mnt/koji"
Alias /packages "/mnt/koji/packages"
Alias /repos "/mnt/koji/repos"
<Directory "/mnt/koji/">
Options Indexes SymLinksIfOwnerMatch
AllowOverride None
Order allow,deny
Allow from all
SetHandler None
IndexOptions NameWidth=* +SuppressDescription +SuppressIcon
</Directory>

regards,

Florian La Roche

--
buildsys mailing list
buildsys@lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/buildsys


STRICTLY PRIVATE, CONFIDENTIAL AND PRIVILEGED COMMUNICATION.

This message (including attachments) may contain information that is
privileged, confidential or protected from disclosure. They are intended
solely for the use of the intended recipient. If you are not the
intended recipient, you are hereby notified that dissemination,
disclosure, copying, distribution, printing, transmission or use of this
message or any information contained in it is strictly prohibited. If
you have received this message from NewBay Software in error, please
immediately notify the sender by reply email and delete this message
from your computer. The content of this e-mail, and any files
transmitted with it, may have been changed or altered without the
consent of the author. Although we have taken steps to ensure that this
email and attachments are free from any virus, we advise that in keeping
with good computing practice the recipient should ensure they are
actually virus free.
--
buildsys mailing list
buildsys@lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/buildsys


All times are GMT. The time now is 05:09 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.