in the meantime I found out, that mkelf-Linux doesnot exits anymore in
Gusty.
So I tried mkelfImage instead. that looked good in the beginning.
With
mkelfImage --output=/boot/nbi.img-2.6.22-14-386 vmlinuz-2.6.22-14-386
initrd.img-2.6.22-14-386
reply:
initrd.img-2.6.22-14-386 already exists
update-initramfs -u seemed to be easier as it automatically goes with the
highest kernel number.
It looked good at the beginning. Booting on Ports 1067/1068 worked to the
2nd dhcp request.
But then it continued with the wrong ltsp-boot server settings.
It looked (tried) for a boot file in 192.168.2.1 (Windows server) but my
Edubuntu Server is on 192.168.2.11
So no client boot again!!
The /etc/ltsp/dhcpd.conf is set accordingly.
Or should I use the
/opt/ltsp/i386/usr/share/initramfs-tools/scripts/ltsp-nbd instead of
the nfs file???
but where shall I put it??
Some ideas???
ps:
I wanted to upgrade to Gusty as I hoped for faster Client boot.
The alternate dhcp Boot worked really great under Feisty and gave me a lot
of advantages.
With this setting I can plug in "my" Edubuntu Server in any existing Network
without any changes!
-----Ursprungliche Nachricht-----
Von: edubuntu-users-bounces@lists.ubuntu.com
[mailto:edubuntu-users-bounces@lists.ubuntu.com]Im Auftrag von Anton
Kaser
Gesendet: Dienstag, 13. November 2007 00:25
An: edubuntu-users@lists.ubuntu.com
Betreff: alternate DHCP 1067/1068 in Gusty
Hi,
I ran the Edubuntu System on an exitsting Windows Network. I used the
alternate DHCP-Ports for this and it worked great under Feisty. For
installing i wrote 3 little Scripts. But now, under Gusty mkelf-linux
doesnot work anymore and so the 2nd DHCP request doesnot work on the
clients. The Client starts to boot and stops when the Network card waits for
the IP-Adress for the 2nd time.
- Any Idea why mkelf doesnot work anymore?? I chanched the Kernel nummber to
2.6.22-14-386
Here the 3 scripts in a row.
# Find the line: #bring up device
# add -p 1068 after ipconfig in the next 8 lines ( 3 times)
# ipconfig -p 1068 ...
--
edubuntu-users mailing list
edubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/edubuntu-users
--
edubuntu-users mailing list
edubuntu-users@lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/edubuntu-users
12-10-2007, 10:12 PM
"Anton Kaser"
AW: alternate DHCP 1067/1068 in Gusty
Booting works now!!!! In Gutsy the package mknbi is not installed
anymore!!!!
apt-get install mknbi
within the chroot-Environment ( sudo chroot /opt/ltsp/i386/ ) solved the
problem with the not working mkelf-image command.
Now the clients are booting completly on port 1067. BUT:
all the syslog-files don't work anymore: eg:
syslogd: /var/log/syslog:Permission denied
finally it comes to
* Starting Kernel log daemon ...
Ubuntu 7.10 ltsp tty1
ltsp login:
What can I do now??? Now even when I switch back to ports 67/68 the
syslogproblem remains!!!
With ltsp-build-clients I have to build a new setup and then it would work
fine again....
- So I am still using Feisty in the School Server!!!! There everything works
slow but fine!
-----Ursprungliche Nachricht-----
Von: edubuntu-users-bounces@lists.ubuntu.com
[mailto:edubuntu-users-bounces@lists.ubuntu.com]Im Auftrag von Anton
Kaser
Gesendet: Dienstag, 13. November 2007 00:25
An: edubuntu-users@lists.ubuntu.com
Betreff: alternate DHCP 1067/1068 in Gusty
Hi,
I ran the Edubuntu System on an exitsting Windows Network. I used the
alternate DHCP-Ports for this and it worked great under Feisty. For
installing i wrote 3 little Scripts. But now, under Gusty mkelf-linux
doesnot work anymore and so the 2nd DHCP request doesnot work on the
clients. The Client starts to boot and stops when the Network card waits for
the IP-Adress for the 2nd time.
- Any Idea why mkelf doesnot work anymore?? I chanched the Kernel nummber to
2.6.22-14-386
Here the 3 scripts in a row.
# Find the line: #bring up device
# add -p 1068 after ipconfig in the next 8 lines ( 3 times)
# ipconfig -p 1068 ...
AW: alternate DHCP 1067/1068 in Gusty
