FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Device-mapper Development

 
 
LinkBack Thread Tools
 
Old 09-02-2011, 07:08 AM
"Chauhan, Vijay"
 
Default multipath-tools: Adding Netapp as a brand name for RDAC

Adding Netapp as brand name for RDAC.

Signed-off-by: Vijay Chauhan <Vijay.chauhan@netapp.com>
Reviewed-by: Bob Stankey <Robert.stankey@netapp.com>
Reviewed-by: Babu Moger <Babu.moger@netapp.com>

---
diff -uprN multipath-tools-orig/libmultipath/hwtable.c
multipath-tools/libmultipath/hwtable.c
--- multipath-tools-orig/libmultipath/hwtable.c 2011-08-26
16:19:58.000000000 +0530
+++ multipath-tools/libmultipath/hwtable.c 2011-08-30
19:13:57.000000000 +0530
@@ -1168,7 +1168,7 @@ static struct hwentry default_hw[] = {
.prio_name = PRIO_RDAC,
.prio_args = NULL,
},
- /* LSI Generic rdac storage */
+ /* LSI/Engenio/NetApp E-Series RDAC storage */
{
.vendor = "(LSI|ENGENIO)",
.product = "INF-01-00",
diff -uprN multipath-tools-orig/multipath/multipath.conf.5
multipath-tools/multipath/multipath.conf.5
--- multipath-tools-orig/multipath/multipath.conf.5 2011-08-26
16:19:58.000000000 +0530
+++ multipath-tools/multipath/multipath.conf.5 2011-08-30
19:17:37.000000000 +0530
@@ -165,7 +165,7 @@ Generate the path priority based on the
Generate the path priority for NetApp arrays.
.TP
.B rdac
-Generate the path priority for LSI/Engenio RDAC controller.
+Generate the path priority for LSI/Engenio/NetApp E-Series RDAC
controller.
.TP
.B hp_sw
Generate the path priority for Compaq/HP controller in
@@ -229,7 +229,7 @@ state.
Check the path state for HP storage arrays with Active/Standby
firmware.
.TP
.B rdac
-Check the path state for LSI/Engenio RDAC storage controller.
+Check the path state for LSI/Engenio/NetApp E-Series RDAC storage
controller.
.TP
.B directio
Read the first sector with direct I/O.
@@ -445,7 +445,7 @@ The following hardware handler are imple
Hardware handler for EMC storage arrays.
.TP
.B 1 rdac
-Hardware handler for LSI/Engenio RDAC storage controller.
+Hardware handler for LSI/Engenio/NetApp E-Series RDAC storage
controller.
.TP
.B 1 hp_sw
Hardware handler for Compaq/HP storage arrays in active/standby
--

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
 
Old 09-05-2011, 08:51 PM
Christophe Varoqui
 
Default multipath-tools: Adding Netapp as a brand name for RDAC

On ven., 2011-09-02 at 18:52 +0530, Chauhan, Vijay wrote:
> Resending this patch. Previous post had indentation issue due to my mail settings.
>
Applied.

Thanks.

> ---
> Adding NetApp as brand name for RDAC.
>
> Signed-off-by: Vijay Chauhan <Vijay.chauhan@netapp.com>
> Reviewed-by: Bob Stankey <Robert.stankey@netapp.com>
> Reviewed-by: Babu Moger <Babu.moger@netapp.com>
>
> ---
> diff -uprN multipath-tools-orig/libmultipath/hwtable.c multipath-tools/libmultipath/hwtable.c
> --- multipath-tools-orig/libmultipath/hwtable.c 2011-08-26 16:19:58.000000000 +0530
> +++ multipath-tools/libmultipath/hwtable.c 2011-08-30 19:13:57.000000000 +0530
> @@ -1168,7 +1168,7 @@ static struct hwentry default_hw[] = {
> .prio_name = PRIO_RDAC,
> .prio_args = NULL,
> },
> - /* LSI Generic rdac storage */
> + /* LSI/Engenio/NetApp E-Series RDAC storage */
> {
> .vendor = "(LSI|ENGENIO)",
> .product = "INF-01-00",
> diff -uprN multipath-tools-orig/multipath/multipath.conf.5 multipath-tools/multipath/multipath.conf.5
> --- multipath-tools-orig/multipath/multipath.conf.5 2011-08-26 16:19:58.000000000 +0530
> +++ multipath-tools/multipath/multipath.conf.5 2011-08-30 19:17:37.000000000 +0530
> @@ -165,7 +165,7 @@ Generate the path priority based on the
> Generate the path priority for NetApp arrays.
> .TP
> .B rdac
> -Generate the path priority for LSI/Engenio RDAC controller.
> +Generate the path priority for LSI/Engenio/NetApp E-Series RDAC controller.
> .TP
> .B hp_sw
> Generate the path priority for Compaq/HP controller in
> @@ -229,7 +229,7 @@ state.
> Check the path state for HP storage arrays with Active/Standby firmware.
> .TP
> .B rdac
> -Check the path state for LSI/Engenio RDAC storage controller.
> +Check the path state for LSI/Engenio/NetApp E-Series RDAC storage controller.
> .TP
> .B directio
> Read the first sector with direct I/O.
> @@ -445,7 +445,7 @@ The following hardware handler are imple
> Hardware handler for EMC storage arrays.
> .TP
> .B 1 rdac
> -Hardware handler for LSI/Engenio RDAC storage controller.
> +Hardware handler for LSI/Engenio/NetApp E-Series RDAC storage controller.
> .TP
> .B 1 hp_sw
> Hardware handler for Compaq/HP storage arrays in active/standby
>
> --
>
> --
> dm-devel mailing list
> dm-devel@redhat.com
> https://www.redhat.com/mailman/listinfo/dm-devel


--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
 
Old 09-20-2011, 01:18 PM
Chandra Seetharaman
 
Default multipath-tools: Adding Netapp as a brand name for RDAC

Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>

On Fri, 2011-09-02 at 18:52 +0530, Chauhan, Vijay wrote:
> Resending this patch. Previous post had indentation issue due to my mail settings.
>
> ---
> Adding NetApp as brand name for RDAC.
>
> Signed-off-by: Vijay Chauhan <Vijay.chauhan@netapp.com>
> Reviewed-by: Bob Stankey <Robert.stankey@netapp.com>
> Reviewed-by: Babu Moger <Babu.moger@netapp.com>
>
> ---
> diff -uprN multipath-tools-orig/libmultipath/hwtable.c multipath-tools/libmultipath/hwtable.c
> --- multipath-tools-orig/libmultipath/hwtable.c 2011-08-26 16:19:58.000000000 +0530
> +++ multipath-tools/libmultipath/hwtable.c 2011-08-30 19:13:57.000000000 +0530
> @@ -1168,7 +1168,7 @@ static struct hwentry default_hw[] = {
> .prio_name = PRIO_RDAC,
> .prio_args = NULL,
> },
> - /* LSI Generic rdac storage */
> + /* LSI/Engenio/NetApp E-Series RDAC storage */
> {
> .vendor = "(LSI|ENGENIO)",
> .product = "INF-01-00",
> diff -uprN multipath-tools-orig/multipath/multipath.conf.5 multipath-tools/multipath/multipath.conf.5
> --- multipath-tools-orig/multipath/multipath.conf.5 2011-08-26 16:19:58.000000000 +0530
> +++ multipath-tools/multipath/multipath.conf.5 2011-08-30 19:17:37.000000000 +0530
> @@ -165,7 +165,7 @@ Generate the path priority based on the
> Generate the path priority for NetApp arrays.
> .TP
> .B rdac
> -Generate the path priority for LSI/Engenio RDAC controller.
> +Generate the path priority for LSI/Engenio/NetApp E-Series RDAC controller.
> .TP
> .B hp_sw
> Generate the path priority for Compaq/HP controller in
> @@ -229,7 +229,7 @@ state.
> Check the path state for HP storage arrays with Active/Standby firmware.
> .TP
> .B rdac
> -Check the path state for LSI/Engenio RDAC storage controller.
> +Check the path state for LSI/Engenio/NetApp E-Series RDAC storage controller.
> .TP
> .B directio
> Read the first sector with direct I/O.
> @@ -445,7 +445,7 @@ The following hardware handler are imple
> Hardware handler for EMC storage arrays.
> .TP
> .B 1 rdac
> -Hardware handler for LSI/Engenio RDAC storage controller.
> +Hardware handler for LSI/Engenio/NetApp E-Series RDAC storage controller.
> .TP
> .B 1 hp_sw
> Hardware handler for Compaq/HP storage arrays in active/standby
>
> --


--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
 

Thread Tools




All times are GMT. The time now is 02:30 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org