- /*
- * We can get an EOPNOTSUPP to ordered writes. Here we clear the
- * ordered flag and reissue them. Because we can't tell the higher
- * layers directly that they should not issue ordered I/O anymore, they
- * need to check if the _XFS_BARRIER_FAILED flag was set during I/O completion.
- */
- if ((bp->b_error == EOPNOTSUPP) &&
- (bp->b_flags & (XBF_ORDERED|XBF_ASYNC)) == (XBF_ORDERED|XBF_ASYNC)) {
- trace_xfs_buf_ordered_retry(bp, _RET_IP_);
- bp->b_flags &= ~XBF_ORDERED;
- bp->b_flags |= _XFS_BARRIER_FAILED;
- xfs_buf_iorequest(bp);
- } else if (bp->b_iodone)
+ if (bp->b_iodone)
(*(bp->b_iodone))(bp);
else if (bp->b_flags & XBF_ASYNC)
xfs_buf_relse(bp);
@@ -1200,7 +1188,7 @@ _xfs_buf_ioapply(
-/*
- * If we try a barrier write, but it fails we have to communicate
- * this to the upper layers. Unfortunately b_error gets overwritten
- * when the buffer is re-issued so we have to add another flag to
- * keep this information.
- */
-#define _XFS_BARRIER_FAILED (1 << 23)
-
typedef unsigned int xfs_buf_flags_t;
/*
- * If the _XFS_BARRIER_FAILED flag was set by a lower
- * layer, it means the underlying device no longer supports
- * barrier I/O. Warn loudly and turn off barriers.
- */
- if (bp->b_flags & _XFS_BARRIER_FAILED) {
- bp->b_flags &= ~_XFS_BARRIER_FAILED;
- l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER;
- xfs_fs_cmn_err(CE_WARN, l->l_mp,
- "xlog_iodone: Barriers are no longer supported"
- " by device. Disabling barriers
");
- }
-
- /*
* Race to shutdown the filesystem if we see an error.
*/
if (XFS_TEST_ERROR((XFS_BUF_GETERROR(bp)), l->l_mp,
--
1.7.1
--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
09-03-2010, 10:29 AM
Tejun Heo
xfs: replace barriers with explicit flush / FUA usage
From: Christoph Hellwig <hch@infradead.org>
Switch to the WRITE_FLUSH_FUA flag for log writes and remove the EOPNOTSUPP
detection for barriers.
- /*
- * We can get an EOPNOTSUPP to ordered writes. Here we clear the
- * ordered flag and reissue them. Because we can't tell the higher
- * layers directly that they should not issue ordered I/O anymore, they
- * need to check if the _XFS_BARRIER_FAILED flag was set during I/O completion.
- */
- if ((bp->b_error == EOPNOTSUPP) &&
- (bp->b_flags & (XBF_ORDERED|XBF_ASYNC)) == (XBF_ORDERED|XBF_ASYNC)) {
- trace_xfs_buf_ordered_retry(bp, _RET_IP_);
- bp->b_flags &= ~XBF_ORDERED;
- bp->b_flags |= _XFS_BARRIER_FAILED;
- xfs_buf_iorequest(bp);
- } else if (bp->b_iodone)
+ if (bp->b_iodone)
(*(bp->b_iodone))(bp);
else if (bp->b_flags & XBF_ASYNC)
xfs_buf_relse(bp);
@@ -1200,7 +1188,7 @@ _xfs_buf_ioapply(
-/*
- * If we try a barrier write, but it fails we have to communicate
- * this to the upper layers. Unfortunately b_error gets overwritten
- * when the buffer is re-issued so we have to add another flag to
- * keep this information.
- */
-#define _XFS_BARRIER_FAILED (1 << 23)
-
typedef unsigned int xfs_buf_flags_t;
/*
- * If the _XFS_BARRIER_FAILED flag was set by a lower
- * layer, it means the underlying device no longer supports
- * barrier I/O. Warn loudly and turn off barriers.
- */
- if (bp->b_flags & _XFS_BARRIER_FAILED) {
- bp->b_flags &= ~_XFS_BARRIER_FAILED;
- l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER;
- xfs_fs_cmn_err(CE_WARN, l->l_mp,
- "xlog_iodone: Barriers are no longer supported"
- " by device. Disabling barriers
");
- }
-
- /*
* Race to shutdown the filesystem if we see an error.
*/
if (XFS_TEST_ERROR((XFS_BUF_GETERROR(bp)), l->l_mp,
--
1.7.1
--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel