FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Device-mapper Development

 
 
LinkBack Thread Tools
 
Old 03-10-2009, 01:35 PM
Konrad Rzeszutek
 
Default Clariion EMC RX300 and "long trespass command will be send" message

> [5078349.903410] scsi 6:0:0:0: rejecting I/O to dead device
... snip ..
> scsi 6:0:0:0 not exist at lsscsi:

How did it disappear?
>
> # lscsi
> [8:0:0:0] disk DGC RAID 5 0324 /dev/sdc
> [9:0:0:0] disk DGC RAID 5 0324 /dev/sdd
> [10:0:0:0] disk DGC RAID 5 0324 /dev/sda
> [11:0:0:0] disk DGC RAID 5 0324 /dev/sdb
>
> multipath is working fine:
> # multipath -ll
> mpath0 (360060160e5101f0020efc45a01cddd11) dm-6 DGC ,RAID 5
> [size=512G][features=1 queue_if_no_path][hwhandler=1 emc]
> \_ round-robin 0 [prio=2][active]
> \_ 8:0:0:0 sdc 8:32 [active][ready]
> \_ 9:0:0:0 sdd 8:48 [active][ready]
> \_ round-robin 0 [prio=0][enabled]
> \_ 10:0:0:0 sda 8:0 [active][ready]
> \_ 11:0:0:0 sdb 8:16 [active][ready]
>
> Dispositve 254:6 is mpath0:
> # devmap_name 254 6
> mpath0
>
> How could can I stop scsi system / multipath from this messages ?

Try: multipathd -k'reconfigure'

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
 

Thread Tools




All times are GMT. The time now is 06:28 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org