FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Redhat > Device-mapper Development

 
 
LinkBack Thread Tools
 
Old 07-28-2008, 08:54 PM
Sajesh Singh
 
Default Strange DM issue on boot

EL 5.2
Hitachi AMS1000 array
Qlogic HBA (qla2xxx driver)

I am seeing a strange issue when rebooting a server connected to the
AMS1000 disk array. If I have a mount point defined in /etc/fstab that
points to a mulitpathe device I receive the following error:


error calling out /sbin/mpath_prio_hds_modular 8:32

That error would seem to indicate a path failure, but if I remove the
entry from /etc/fstab and reboot I am able to mount the device from the
command line. I have tried to include the qlogic driver in the initrd,
but that did help in any way. Are the dm-multipath drivers loading at
the incorrect time? Has anyone ever encountered this before?


Regards,

Sajesh

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
 
Old 07-28-2008, 09:20 PM
"Charles Polk"
 
Default Strange DM issue on boot

The controllers are not happy with the panging on the controllers.

----- Original Message -----
From: dm-devel-bounces@redhat.com <dm-devel-bounces@redhat.com>
To: dm-devel@redhat.com <dm-devel@redhat.com>
Sent: Mon Jul 28 13:54:52 2008
Subject: [dm-devel] Strange DM issue on boot

EL 5.2
Hitachi AMS1000 array
Qlogic HBA (qla2xxx driver)

I am seeing a strange issue when rebooting a server connected to the
AMS1000 disk array. If I have a mount point defined in /etc/fstab that
points to a mulitpathe device I receive the following error:

error calling out /sbin/mpath_prio_hds_modular 8:32

That error would seem to indicate a path failure, but if I remove the
entry from /etc/fstab and reboot I am able to mount the device from the
command line. I have tried to include the qlogic driver in the initrd,
but that did help in any way. Are the dm-multipath drivers loading at
the incorrect time? Has anyone ever encountered this before?

Regards,

Sajesh

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
 
Old 07-29-2008, 02:07 AM
Sajesh Singh
 
Default Strange DM issue on boot

Charles,
Thanks for the quick reply, do you mean that the controller
is reporting incorrect information to the multipath modules? I have the
same setup on CENTOS 4.6 servers with no issues.





Charles Polk wrote:

The controllers are not happy with the panging on the controllers.

----- Original Message -----
From: dm-devel-bounces@redhat.com <dm-devel-bounces@redhat.com>
To: dm-devel@redhat.com <dm-devel@redhat.com>
Sent: Mon Jul 28 13:54:52 2008
Subject: [dm-devel] Strange DM issue on boot

EL 5.2
Hitachi AMS1000 array
Qlogic HBA (qla2xxx driver)

I am seeing a strange issue when rebooting a server connected to the
AMS1000 disk array. If I have a mount point defined in /etc/fstab that
points to a mulitpathe device I receive the following error:


error calling out /sbin/mpath_prio_hds_modular 8:32

That error would seem to indicate a path failure, but if I remove the
entry from /etc/fstab and reboot I am able to mount the device from the
command line. I have tried to include the qlogic driver in the initrd,
but that did help in any way. Are the dm-multipath drivers loading at
the incorrect time? Has anyone ever encountered this before?


Regards,

Sajesh

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel



--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
 
Old 07-29-2008, 02:47 PM
Sajesh Singh
 
Default Strange DM issue on boot

Charles Polk wrote:

The controllers are not happy with the panging on the controllers.


Should I not be using the default settings in the /etc/multipath.conf?
Are there any specific settings that need to be configured to use
multipathd with an HDS AMS1000 array?



----- Original Message -----
From: dm-devel-bounces@redhat.com <dm-devel-bounces@redhat.com>
To: dm-devel@redhat.com <dm-devel@redhat.com>
Sent: Mon Jul 28 13:54:52 2008
Subject: [dm-devel] Strange DM issue on boot

EL 5.2
Hitachi AMS1000 array
Qlogic HBA (qla2xxx driver)

I am seeing a strange issue when rebooting a server connected to the
AMS1000 disk array. If I have a mount point defined in /etc/fstab that
points to a mulitpathe device I receive the following error:


error calling out /sbin/mpath_prio_hds_modular 8:32

That error would seem to indicate a path failure, but if I remove the
entry from /etc/fstab and reboot I am able to mount the device from the
command line. I have tried to include the qlogic driver in the initrd,
but that did help in any way. Are the dm-multipath drivers loading at
the incorrect time? Has anyone ever encountered this before?


Regards,

Sajesh

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel



--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
 

Thread Tools




All times are GMT. The time now is 12:08 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org