FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian User

 
 
LinkBack Thread Tools
 
Old 09-13-2012, 12:52 PM
lavcina
 
Default rigmarole about debian and radeon

Dear Debian Users,


to start it should not be unmentioned that my linux knowledge is in
development. So your experience is highly needed. For some reasons
I want to use the debian squeeze OS. Might be that you feel the same vocation.
Now I have installed a debian squeeze OS with the gnome environment and one
with the kde GUI. Of course with a seperate home partition.
My grafics card, a radeon hd 4850, does not work acceptable under
gnome but works fine ( sometimes ) then I start the kde Desktop.
I suspect that something has to be adjusted in the configuration files
because the radeon driver ( the free version ) does not work right
from the beginning. Sometimes the HDMI device isn't probed right and
has difficulties with the EDID number. I use two Monitors one
connected via HDMI and a smaller one by VGA

I tried to create a xorg.conf file but the result is not convincing. I will
append to this message the Xlog output and the xorg.conf.new file
contents.

Thank you for your attention.
best regards
Boris Peričić
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
Current Operating System: Linux xiuxiu 2.6.39-bpo.2-amd64 #1 SMP Tue Jul 26 10:35:23 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-bpo.2-amd64 root=UUID=7968e0c4-93a6-48fe-800f-ae08ae7a6ae9 ro quiet
Build Date: 29 October 2011 06:58:14PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 4 12:15:47 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c8a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:944a:1787:3000 ATI Technologies Inc M98L [Mobility Radeon HD 4850] rev 0, Mem @ 0xc0000000/268435456, 0xfea20000/65536, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.13.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.13.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4290, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] Kernel modesetting enabled.
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility RADEON HD 4850" (ChipID = 0x944a)
(II) RADEON(0): PCIE card detected
(WW) RADEON(0): Color tiling is not yet supported on R600/R700
(II) RADEON(0): KMS Color Tiling: disabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): EDID for output DVI-0
(II) RADEON(0): EDID for output HDMI-0
(II) RADEON(0): Manufacturer: SAM Model: 7ce Serial#: 808465712
(II) RADEON(0): Year: 2011 Week: 34
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 60 vert.: 34
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.644 redY: 0.339 greenX: 0.311 greenY: 0.613
(II) RADEON(0): blueX: 0.152 blueY: 0.062 whiteX: 0.312 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
(II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEON(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #7: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 148.5 MHz Image Size: 598 x 336 mm
(II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 74.2 MHz Image Size: 598 x 336 mm
(II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
(II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
(II) RADEON(0): Monitor name: SMS27A350H
(II) RADEON(0): Number of EDID sections to follow: 1
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004c2dce0730353030
(II) RADEON(0): 22150103803c22782af831a4564f9d27
(II) RADEON(0): 0f5054bfef80a9408180814081009500
(II) RADEON(0): b300714f950f023a801871382d40582c
(II) RADEON(0): 450056502100001e011d007251d01e20
(II) RADEON(0): 6e28550056502100001e000000fd0038
(II) RADEON(0): 4b1e5111000a202020202020000000fc
(II) RADEON(0): 00534d53323741333530480a20200164
(II) RADEON(0): Not using mode "1920x1080i" (interlace mode not supported)
(II) RADEON(0): Printing probed modes for output HDMI-0
(II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
(II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): Manufacturer: SAM Model: 18f Serial#: 1296707895
(II) RADEON(0): Year: 2005 Week: 12
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.650 redY: 0.330 greenX: 0.330 greenY: 0.600
(II) RADEON(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
(II) RADEON(0): Monitor name: SyncMaster
(II) RADEON(0): Serial No: HSGY317931
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004c2d8f0137314a4d
(II) RADEON(0): 0c0f01036c221b782aaaa5a654549926
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000fd00384b1e
(II) RADEON(0): 510e000a202020202020000000fc0053
(II) RADEON(0): 796e634d61737465720a2020000000ff
(II) RADEON(0): 00485347593331373933310a202000c4
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output HDMI-0 connected
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output HDMI-0 using initial mode 1280x1024
(II) RADEON(0): Output VGA-0 using initial mode 1280x1024
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:40000000 visible:f7d7000
(II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): Front buffer size: 5120K
(II) RADEON(0): VRAM usage limit set to 223801K
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): Acceleration disabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 270
(II) config/udev: Adding input device Power Button (/dev/input/event6)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Power Button (/dev/input/event5)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event0)
(**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech USB Optical Mouse: always reports core events
(**) Logitech USB Optical Mouse: Device: "/dev/input/event0"
(II) Logitech USB Optical Mouse: Found 3 mouse buttons
(II) Logitech USB Optical Mouse: Found scroll wheel(s)
(II) Logitech USB Optical Mouse: Found relative axes
(II) Logitech USB Optical Mouse: Found x and y relative axes
(II) Logitech USB Optical Mouse: Configuring as mouse
(**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
(II) Logitech USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HID 04d9:1203 (/dev/input/event1)
(**) HID 04d9:1203: Applying InputClass "evdev keyboard catchall"
(**) HID 04d9:1203: always reports core events
(**) HID 04d9:1203: Device: "/dev/input/event1"
(II) HID 04d9:1203: Found keys
(II) HID 04d9:1203: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 04d9:1203" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device HID 04d9:1203 (/dev/input/event2)
(**) HID 04d9:1203: Applying InputClass "evdev keyboard catchall"
(**) HID 04d9:1203: always reports core events
(**) HID 04d9:1203: Device: "/dev/input/event2"
(II) HID 04d9:1203: Found keys
(II) HID 04d9:1203: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 04d9:1203" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device VISENTA V1 (/dev/input/event3)
(**) VISENTA V1 : Applying InputClass "evdev keyboard catchall"
(**) VISENTA V1 : always reports core events
(**) VISENTA V1 : Device: "/dev/input/event3"
(II) VISENTA V1 : Found keys
(II) VISENTA V1 : Configuring as keyboard
(II) XINPUT: Adding extended input device "VISENTA V1 " (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device VISENTA V1 (/dev/input/event4)
(**) VISENTA V1 : Applying InputClass "evdev pointer catchall"
(**) VISENTA V1 : Applying InputClass "evdev keyboard catchall"
(**) VISENTA V1 : always reports core events
(**) VISENTA V1 : Device: "/dev/input/event4"
(II) VISENTA V1 : Found 8 mouse buttons
(II) VISENTA V1 : Found scroll wheel(s)
(II) VISENTA V1 : Found relative axes
(II) VISENTA V1 : Found x and y relative axes
(II) VISENTA V1 : Found absolute axes
(II) VISENTA V1 : Found keys
(II) VISENTA V1 : Configuring as mouse
(II) VISENTA V1 : Configuring as keyboard
(**) VISENTA V1 : YAxisMapping: buttons 4 and 5
(**) VISENTA V1 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "VISENTA V1 " (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) VISENTA V1 : initialized for relative axes.
(WW) VISENTA V1 : ignoring absolute axes.
(II) config/udev: Adding input device VISENTA V1 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) RADEON(0): EDID vendor "SAM", prod id 399
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Allocate new frame buffer 1920x1088 stride 1920
(II) RADEON(0): VRAM usage limit set to 221065K
(II) RADEON(0): EDID vendor "SAM", prod id 399
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Allocate new frame buffer 3200x1088 stride 3200
(II) RADEON(0): VRAM usage limit set to 216169K
(II) RADEON(0): EDID vendor "SAM", prod id 399
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): EDID vendor "SAM", prod id 399
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): EDID vendor "SAM", prod id 399
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): EDID vendor "SAM", prod id 399
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) config/udev: removing device VISENTA V1
(II) VISENTA V1 : Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device VISENTA V1
(II) VISENTA V1 : Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/event3)
(**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev pointer catchall"
(**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev keyboard catchall"
(**) 2.4GHz 2way RF Receiver: always reports core events
(**) 2.4GHz 2way RF Receiver: Device: "/dev/input/event3"
(II) 2.4GHz 2way RF Receiver: Found 12 mouse buttons
(II) 2.4GHz 2way RF Receiver: Found scroll wheel(s)
(II) 2.4GHz 2way RF Receiver: Found relative axes
(II) 2.4GHz 2way RF Receiver: Found x and y relative axes
(II) 2.4GHz 2way RF Receiver: Found absolute axes
(II) 2.4GHz 2way RF Receiver: Found keys
(II) 2.4GHz 2way RF Receiver: Configuring as mouse
(II) 2.4GHz 2way RF Receiver: Configuring as keyboard
(**) 2.4GHz 2way RF Receiver: YAxisMapping: buttons 4 and 5
(**) 2.4GHz 2way RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "2.4GHz 2way RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) 2.4GHz 2way RF Receiver: initialized for relative axes.
(WW) 2.4GHz 2way RF Receiver: ignoring absolute axes.
(II) config/udev: Adding input device VISENTA V1 (/dev/input/event4)
(**) VISENTA V1 : Applying InputClass "evdev keyboard catchall"
(**) VISENTA V1 : always reports core events
(**) VISENTA V1 : Device: "/dev/input/event4"
(II) VISENTA V1 : Found keys
(II) VISENTA V1 : Configuring as keyboard
(II) XINPUT: Adding extended input device "VISENTA V1 " (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device VISENTA V1 (/dev/input/event9)
(**) VISENTA V1 : Applying InputClass "evdev pointer catchall"
(**) VISENTA V1 : Applying InputClass "evdev keyboard catchall"
(**) VISENTA V1 : always reports core events
(**) VISENTA V1 : Device: "/dev/input/event9"
(II) VISENTA V1 : Found 8 mouse buttons
(II) VISENTA V1 : Found scroll wheel(s)
(II) VISENTA V1 : Found relative axes
(II) VISENTA V1 : Found x and y relative axes
(II) VISENTA V1 : Found absolute axes
(II) VISENTA V1 : Found keys
(II) VISENTA V1 : Configuring as mouse
(II) VISENTA V1 : Configuring as keyboard
(**) VISENTA V1 : YAxisMapping: buttons 4 and 5
(**) VISENTA V1 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "VISENTA V1 " (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) VISENTA V1 : initialized for relative axes.
(WW) VISENTA V1 : ignoring absolute axes.
(II) config/udev: Adding input device VISENTA V1 (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device 2.4 GHz RF Receiver (/dev/input/event11)
(**) 2.4 GHz RF Receiver: Applying InputClass "evdev pointer catchall"
(**) 2.4 GHz RF Receiver: Applying InputClass "evdev keyboard catchall"
(**) 2.4 GHz RF Receiver: always reports core events
(**) 2.4 GHz RF Receiver: Device: "/dev/input/event11"
(II) 2.4 GHz RF Receiver: Found 8 mouse buttons
(II) 2.4 GHz RF Receiver: Found scroll wheel(s)
(II) 2.4 GHz RF Receiver: Found relative axes
(II) 2.4 GHz RF Receiver: Found x and y relative axes
(II) 2.4 GHz RF Receiver: Found absolute axes
(II) 2.4 GHz RF Receiver: Found keys
(II) 2.4 GHz RF Receiver: Configuring as mouse
(II) 2.4 GHz RF Receiver: Configuring as keyboard
(**) 2.4 GHz RF Receiver: YAxisMapping: buttons 4 and 5
(**) 2.4 GHz RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "2.4 GHz RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) 2.4 GHz RF Receiver: initialized for relative axes.
(WW) 2.4 GHz RF Receiver: ignoring absolute axes.
(II) config/udev: Adding input device 2.4 GHz RF Receiver (/dev/input/mouse3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device 2.4 GHz RF Receiver (/dev/input/event10)
(**) 2.4 GHz RF Receiver: Applying InputClass "evdev keyboard catchall"
(**) 2.4 GHz RF Receiver: always reports core events
(**) 2.4 GHz RF Receiver: Device: "/dev/input/event10"
(II) 2.4 GHz RF Receiver: Found keys
(II) 2.4 GHz RF Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "2.4 GHz RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: removing device 2.4 GHz RF Receiver
(II) 2.4 GHz RF Receiver: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device 2.4 GHz RF Receiver
(II) 2.4 GHz RF Receiver: Close
(II) UnloadModule: "evdev"
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection

Section "Module"
Load "glx"
Load "dri2"
Load "record"
Load "dri"
Load "dbe"
Load "extmod"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
#DisplaySize 340 270 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "M98L [Mobility Radeon HD 4850]"
BusID "PCI:1:0:0"
EndSection


Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
 
Old 09-13-2012, 04:33 PM
Camalen
 
Default rigmarole about debian and radeon

On Thu, 13 Sep 2012 14:52:15 +0200, lavcina wrote:

> to start it should not be unmentioned that my linux knowledge is in
> development. So your experience is highly needed. For some reasons I
> want to use the debian squeeze OS. Might be that you feel the same
> vocation. Now I have installed a debian squeeze OS with the gnome
> environment and one with the kde GUI. Of course with a seperate home
> partition.

Why "of course"? I don't have a separate /home partitions and still
happy :-)

> My grafics card, a radeon hd 4850, does not work acceptable under gnome
> but works fine ( sometimes ) then I start the kde Desktop.

What problems are you facing in GNOME? Be the more specific you can.

> I suspect that something has to be adjusted in the configuration files
> because the radeon driver ( the free version ) does not work right from
> the beginning. Sometimes the HDMI device isn't probed right and has
> difficulties with the EDID number. I use two Monitors one connected via
> HDMI and a smaller one by VGA

I don't see where the problem with HDMI is. Can you describe what are the
symptoms? Is it related to resolution, flickering, output not detected or
bad positioning...?

> I tried to create a xorg.conf file but the result is not convincing. I
> will append to this message the Xlog output and the xorg.conf.new file
> contents.

(...)

I would try with no "xorg.conf" file at all which OTOH, should not be
required by now.

I will leave the lines I find relevant...

> Current Operating System: Linux xiuxiu 2.6.39-bpo.2-amd64 #1 SMP Tue Jul 26 10:35:23 UTC 2011 x86_64

So you are using a backported kernel...

> (WW) RADEON(0): Color tiling is not yet supported on R600/R700
> (II) RADEON(0): KMS Color Tiling: disabled

(...)

> (II) RADEON(0): Output DVI-0 has no monitor section
> (II) RADEON(0): Output HDMI-0 has no monitor section
> (II) RADEON(0): Output VGA-0 has no monitor section

(...)

> (II) RADEON(0): Output DVI-0 disconnected
> (II) RADEON(0): Output HDMI-0 connected
> (II) RADEON(0): Output VGA-0 connected

(...)

So you are using the VGA and HDMI ports, right? Using digital outputs is
usually recommended (meaning, dvi would be better that vga).

> (WW) RADEON(0): Direct rendering disabled
> (II) RADEON(0): Acceleration disabled

To get 3D capabilities you may need to install some binary blob
(firmware-linux-nonfree) from the non-free repository.

Greetings,

--
Camalen


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/k2t1sk$jks$11@ger.gmane.org
 
Old 09-13-2012, 07:30 PM
lavcina
 
Default rigmarole about debian and radeon

> Why "of course"? I don't have a separate /home partitions and still

> happy :-)



my sweet /home is on a separate physical drive and I hope now to be able to mess a little bit around without losing all data...



> What problems are you facing in GNOME? Be the more specific you can.

> ...

> I don't see where the problem with HDMI is. Can you describe what are the

> symptoms? Is it related to resolution, flickering, output not detected or

> bad positioning...?



back to my issue:



Under KDE everything is in the best order. The image is just as it should be but my HDMI Monitor is not always detected on boot-up. Even when KDE runs the HDMI screen breaks on occasion. When I start GNOME on the other hand the resolution on both screens is poor somehow blurred. My head begins to ache so I think there is also flickering. Positioning is ok.

I suspect that the driver isn't used right.



> I would try with no "xorg.conf" file at all which OTOH, should not be

> required by now.



What do you mean by OTOH?



> So you are using the VGA and HDMI ports, right? Using digital outputs is

> usually recommended (meaning, dvi would be better that vga).

>

> > (WW) RADEON(0): Direct rendering disabled

> > (II) RADEON(0): Acceleration disabled

>

> To get 3D capabilities you may need to install some binary blob

> (firmware-linux-nonfree) from the non-free repository.



Yes that's right. I use HDMI and VGA ports. I can't use dvi because my second Monitor is an older model with an interesting almost square geometry - very good for reading.

Up to now I don't miss the extended 3D capabilities but you never know...



best regards

Boris
 
Old 09-14-2012, 05:10 PM
Camaleón
 
Default rigmarole about debian and radeon

On Thu, 13 Sep 2012 21:30:29 +0200, lavcina wrote:

(please, do not send html formatted posts, thanks!)

>> Why "of course"? I don't have a separate /home partitions and still
>> happy :-)
>
> my sweet /home is on a separate physical drive and I hope now to be able
> to mess a little bit around without losing all data...

Great, I just wanted to note that a separate "/home" is not required.

>> What problems are you facing in GNOME? Be the more specific you can.
>> ...
>> I don't see where the problem with HDMI is. Can you describe what are
>> the symptoms? Is it related to resolution, flickering, output not
>> detected or bad positioning...?
>
> back to my issue:
>
> Under KDE everything is in the best order. The image is just as it
> should be but my HDMI Monitor is not always detected on boot-up.

So first problem in KDE: HDMI output is not always enabled.

> Even when KDE runs the HDMI screen breaks on occasion.

In what way "breaks"? Please describe what happens, what's what you see.

> When I start GNOME on the other hand the resolution on both screens is
> poor somehow blurred.

First problem in GNOME: screen resolution is wrong.

> My head begins to ache so I think there is also flickering. Positioning
> is ok. I suspect that the driver isn't used right.

Second problem in GNOME: Refresh rate is wrong.

Both issues (with KDE and GNOME) can be due to the static values you have
defined at the "xorg.conf" file. What happens when you rename this file
(e.g., to something like "/etc/X11/xorg.conf.old") and boot the system?

>> I would try with no "xorg.conf" file at all which OTOH, should not be
>> required by now.
>
> What do you mean by OTOH?

OTOH → On the other hand

>> So you are using the VGA and HDMI ports, right? Using digital outputs
>> is usually recommended (meaning, dvi would be better that vga).
>>
>> > (WW) RADEON(0): Direct rendering disabled (II) RADEON(0):
>> > Acceleration disabled
>>
>> To get 3D capabilities you may need to install some binary blob
>> (firmware-linux-nonfree) from the non-free repository.
>
> Yes that's right. I use HDMI and VGA ports. I can't use dvi because my
> second Monitor is an older model with an interesting almost square
> geometry - very good for reading.
> Up to now I don't miss the extended 3D capabilities but you never
> know...

In Squeeze, the VGA 3D capabilities are not required unless you are using
some kind of window compositing (such Compiz or KWin) which benefits from
it but in any case, enabling direct rendering wouldn't do any harm while
can speed up the desktop.

Greetings,

--
Camaleón


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/k2vod9$4lj$10@ger.gmane.org
 
Old 09-15-2012, 02:04 PM
lavcina
 
Default rigmarole about debian and radeon

first I want to thank you for your help Camalen

>Great, I just wanted to note that a separate "/home" is not required.

everyone has his believes and little inconsistencies

>So first problem in KDE: HDMI output is not always enabled.
>In what way "breaks"? Please describe what happens, what's what you see.


yes that's the case. The kde Monitor configuration tool sometimes does not
recognize the HDMI device and just blank fields are displayed. My little VGA
Monitor then becomes the main display and the only one stated in the kde tool.
The HDMI Monitor does not start at all or becomes the extended virtual
screen. On boot-up only the middle part of my big HDMI screen is used and the
login screen blinks slowly



>First problem in GNOME: screen resolution is wrong.

>Second problem in GNOME: Refresh rate is wrong.

>Both issues (with KDE and GNOME) can be due to the static values you have
>defined at the "xorg.conf" file. What happens when you rename this file
>(e.g., to something like "/etc/X11/xorg.conf.old") and boot the system?


I don't think there is something like a static config file. I'll show you the
ls output of /etc/X11

ls -p /etc/X11
app-defaults/ default-display-manager rgb.txt xinit/ Xreset
Xresources/ Xsession.d/ XvMCConfig
cursors/ fonts/ X xkb/ Xreset.d/ Xsession
Xsession.options Xwrapper.config


>In Squeeze, the VGA 3D capabilities are not required unless you are using
>some kind of window compositing (such Compiz or KWin) which benefits from
>it but in any case, enabling direct rendering wouldn't do any harm while
>can speed up the desktop

direct rendering sounds good. After solving my display problems you are
invited to show me how to enable it ...
3D is quite nice too but not really necessary now...

greetings
Boris



--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201209151604.47378.boris.pericic@gmx.net">http://lists.debian.org/201209151604.47378.boris.pericic@gmx.net
 
Old 09-15-2012, 02:22 PM
lavcina
 
Default rigmarole about debian and radeon

first I want to thank you for your help Camalen

>Great, I just wanted to note that a separate "/home" is not required.

everyone has his believes and little inconsistencies

>So first problem in KDE: HDMI output is not always enabled.
>In what way "breaks"? Please describe what happens, what's what you see.


yes that's the case. The kde Monitor configuration tool sometimes does not
recognize the HDMI device and just blank fields are displayed. My little VGA
Monitor then becomes the main display and the only one stated in the kde tool.
The HDMI Monitor does not start at all or becomes the extended virtual
screen. On boot-up only the middle part of my big HDMI screen is used and the
login screen blinks slowly



>First problem in GNOME: screen resolution is wrong.

>Second problem in GNOME: Refresh rate is wrong.

>Both issues (with KDE and GNOME) can be due to the static values you have
>defined at the "xorg.conf" file. What happens when you rename this file
>(e.g., to something like "/etc/X11/xorg.conf.old") and boot the system?


I don't think there is something like a static config file. I'll show you the
ls output of /etc/X11

ls -p /etc/X11
app-defaults/ default-display-manager rgb.txt xinit/ Xreset
Xresources/ Xsession.d/ XvMCConfig
cursors/ fonts/ X xkb/ Xreset.d/ Xsession
Xsession.options Xwrapper.config


>In Squeeze, the VGA 3D capabilities are not required unless you are using
>some kind of window compositing (such Compiz or KWin) which benefits from
>it but in any case, enabling direct rendering wouldn't do any harm while
>can speed up the desktop

direct rendering sounds good. After solving my display problems you are
invited to show me how to enable it ...
3D is quite nice too but not really necessary now...

greetings
Boris


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201209151622.23839.boris.pericic@gmx.net">http://lists.debian.org/201209151622.23839.boris.pericic@gmx.net
 
Old 09-15-2012, 02:24 PM
lavcina
 
Default rigmarole about debian and radeon

first I want to thank you for your help Camalen

>Great, I just wanted to note that a separate "/home" is not required.

everyone has his believes and little inconsistencies

>So first problem in KDE: HDMI output is not always enabled.
>In what way "breaks"? Please describe what happens, what's what you see.


yes that's the case. The kde Monitor configuration tool sometimes does not
recognize the HDMI device and just blank fields are displayed. My little VGA
Monitor then becomes the main display and the only one stated in the kde tool.
The HDMI Monitor does not start at all or becomes the extended virtual
screen. On boot-up only the middle part of my big HDMI screen is used and the
login screen blinks slowly



>First problem in GNOME: screen resolution is wrong.

>Second problem in GNOME: Refresh rate is wrong.

>Both issues (with KDE and GNOME) can be due to the static values you have
>defined at the "xorg.conf" file. What happens when you rename this file
>(e.g., to something like "/etc/X11/xorg.conf.old") and boot the system?


I don't think there is something like a static config file. I'll show you the
ls output of /etc/X11

ls -p /etc/X11
app-defaults/ default-display-manager rgb.txt xinit/ Xreset
Xresources/ Xsession.d/ XvMCConfig
cursors/ fonts/ X xkb/ Xreset.d/ Xsession
Xsession.options Xwrapper.config


>In Squeeze, the VGA 3D capabilities are not required unless you are using
>some kind of window compositing (such Compiz or KWin) which benefits from
>it but in any case, enabling direct rendering wouldn't do any harm while
>can speed up the desktop

direct rendering sounds good. After solving my display problems you are
invited to show me how to enable it ...
3D is quite nice too but not really necessary now...

greetings
Boris


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201209151624.52931.boris.pericic@gmx.net">http://lists.debian.org/201209151624.52931.boris.pericic@gmx.net
 
Old 09-15-2012, 04:13 PM
Camalen
 
Default rigmarole about debian and radeon

On Sat, 15 Sep 2012 16:04:47 +0200, lavcina wrote:

>>So first problem in KDE: HDMI output is not always enabled. In what way
>>"breaks"? Please describe what happens, what's what you see.
>
>
> yes that's the case. The kde Monitor configuration tool sometimes does
> not recognize the HDMI device and just blank fields are displayed. My
> little VGA Monitor then becomes the main display and the only one stated
> in the kde tool. The HDMI Monitor does not start at all or becomes the
> extended virtual screen. On boot-up only the middle part of my big HDMI
> screen is used and the login screen blinks slowly

- Can you enable the HDMI monitor manually by means of "xrandr"?

- Does the same happen with Squeeze stock kernel? If I recall correctly,
you were using a kernel from backports.

- Does the same happen with an updated kernel (backports has now kernel
3.2.23)

- Does the same happen with GNOME or just randomly with KDE?

>>First problem in GNOME: screen resolution is wrong.
>
>>Second problem in GNOME: Refresh rate is wrong.
>
>>Both issues (with KDE and GNOME) can be due to the static values you
>>have defined at the "xorg.conf" file. What happens when you rename this
>>file (e.g., to something like "/etc/X11/xorg.conf.old") and boot the
>>system?
>
>
> I don't think there is something like a static config file.

I'm neither that sure but testing this won't hurt (just remember to make
a backup of the original "xorg.conf" file at first place).

> I'll show you the ls output of /etc/X11

(re-arranging the output)
>
> ls -p /etc/X11
> app-defaults/
> default-display-manager
> rgb.txt
> xinit/
> Xreset
> Xresources/
> Xsession.d/
> XvMCConfig cursors/
> fonts/
> X
> xkb/
> Xreset.d/
> Xsession
> Xsession.options
> Xwrapper.config

Run "locate xorg.conf" and send here the output. And also run "ls -l /usr/
share/X11/xorg.conf.d", just in case.

>>In Squeeze, the VGA 3D capabilities are not required unless you are
>>using some kind of window compositing (such Compiz or KWin) which
>>benefits from it but in any case, enabling direct rendering wouldn't do
>>any harm while can speed up the desktop
>
> direct rendering sounds good. After solving my display problems you are
> invited to show me how to enable it ... 3D is quite nice too but not
> really necessary now...

If you're interested, you can enable 3D by following these
instructions ;-)

http://wiki.debian.org/AtiHowTo

Greetings,

--
Camalen


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/k329fm$200$10@ger.gmane.org
 
Old 09-17-2012, 04:47 PM
Chris Bannister
 
Default rigmarole about debian and radeon

On Thu, Sep 13, 2012 at 09:30:29PM +0200, lavcina wrote:
>
> What do you mean by OTOH?
>

http://catb.org/jargon/html/O/OTOH.html
http://catb.org/jargon/html/introduction.html

--
"If you're not careful, the newspapers will have you hating the people
who are being oppressed, and loving the people who are doing the
oppressing." --- Malcolm X


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/20120917164742.GM8568@tal
 
Old 09-18-2012, 12:02 PM
Martin Steigerwald
 
Default rigmarole about debian and radeon

Am Samstag, 15. September 2012 schrieb Camalen:
> On Sat, 15 Sep 2012 16:04:47 +0200, lavcina wrote:
> >>So first problem in KDE: HDMI output is not always enabled. In what
> >>way "breaks"? Please describe what happens, what's what you see.
> >
> >
> >
> >
> > yes that's the case. The kde Monitor configuration tool sometimes
> > does not recognize the HDMI device and just blank fields are
> > displayed. My little VGA Monitor then becomes the main display and
> > the only one stated in the kde tool. The HDMI Monitor does not
> > start at all or becomes the extended virtual screen. On boot-up
> > only the middle part of my big HDMI screen is used and the login
> > screen blinks slowly
>
> - Can you enable the HDMI monitor manually by means of "xrandr"?

Good idea. If it does, a configuration snippet in /etc/X11/xorg.conf.d
could be helpful. The recommendation to not use any configuration at all is
often best, but in multi monitor setups I am using some configuration
snippet in said directory on the workstation at work since quite some
time, cause automatic setup didnt work for me either.

Before that trying to setup up things with krandrtry might help. But then
this settings might only be specific to one desktop environment, namely KDE
in this case. A configuration snippet for X.org should work in any desktop
environment / session.


Reading recommendation:

http://wiki.debian.org/XStrikeForce/HowToRandR12


So place something along the lines of:

---------------------------------------------------------------------
Section "Device"
Identifier "My Graphic Board"
...
Option "Monitor-LVDS" "Internal Panel"
Option "Monitor-VGA" "External VGA Monitor"
EndSection
Section "Monitor"
Identifier "Internal Panel"
...
EndSection
Section "Monitor"
Identifier "External VGA Monitor"
...
EndSection
---------------------------------------------------------------------

in /etc/X11/xorg.conf.d/display.conf (or something like this).

Adapt monitor output names to what xrandr tells you as output names.

You can hardcode resolutions as needed. I would only do that if automatic
detections fails tough. If necessary raise the maximum virtual size. All
described on that wiki page.

Golden rule: Only configure that which doesnt work out of the box. Leave
everything else out. That approach works really nicely for me since the
time X.org was changed to configure almost everything automatically.

If need be I could dig out my configuration snippet when I am back at work
next week.

> - Does the same happen with Squeeze stock kernel? If I recall
> correctly, you were using a kernel from backports.

OTOH it might be an idea to try with backport kernel + backport X.org as
well. Squeeze Radeon drivers are quite old already.

> - Does the same happen with an updated kernel (backports has now
> kernel 3.2.23)



Ciao,
--
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA B82F 991B EAAC A599 84C7


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201209181402.29725.Martin@lichtvoll.de">http://lists.debian.org/201209181402.29725.Martin@lichtvoll.de
 

Thread Tools




All times are GMT. The time now is 09:27 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org