Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian User (http://www.linux-archive.org/debian-user/)
-   -   Dual-Monitor help (http://www.linux-archive.org/debian-user/696855-dual-monitor-help.html)

Nelson Green 08-22-2012 10:13 PM

Dual-Monitor help
 
Good evening all,

I have been trying to get a dual monitor set-up working, and am getting no where
with this, so it is time to request help.

I have a Dell Precision T5500 with dual video cards, and I would like to have
one large screen spread across the two monitors. The graphics cards are nVidia
Quadro 600s, with a monitor connected to each DVI output. I am not concerned
about performance, since the most graphics intensive stuff I do is surfing the
web and database development, but I would like to be able to develop in a
terminal on one monitor and see the results in the application on the other
monitor.

This is a stock installation of Squeeze, other than a "custom" 3.5.1 kernel
package made with make-kpkg. I say "custom" because the only configuration I did
was to de-select the paravirtualized (or something close to that) option, and
then compile the kernel, along with all modules.

I am not sure where to start. One thing I have tried to do is to see what xrandr
gives me, and I don't completely understand the output of that. I have included
that output, and a copy of Xorg.0.log below.

At this point I would welcome any suggestions as to what to try next.

All the best,
Nelson

===== Output of xrandr --verbose: ==============================================

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1200, current 1920 x 1200, maximum 1920 x 1200
default connected 1920x1200+0+0 (0x108) normal (normal) 0mm x 0mm
*** Identifier: 0x107
*** Timestamp:* 14239
*** Subpixel:** unknown
*** Clones:***
*** CRTC:****** 0
*** CRTCs:***** 0
*** Transform:* 1.000000 0.000000 0.000000
*** *********** 0.000000 1.000000 0.000000
*** *********** 0.000000 0.000000 1.000000
*** ********** filter:
* 1920x1200 (0x108)*** 0.0MHz *current
******* h: width* 1920 start*** 0 end*** 0 total 1920 skew*** 0 clock*** 0.0KHz
******* v: height 1200 start*** 0 end*** 0 total 1200********** clock*** 0.0Hz


===== Xorg.0.log ================================================== =============

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
Current Operating System: Linux hri-310-54291 3.5.1-15aug12.0956 #1 SMP Wed Aug 15 10:07:32 CDT 2012 i686
Kernel command line: BOOT_IMAGE=Squeeze-3.5.1 ro root=UUID=7d97241f-41f2-4532-b578-3829b4424233
Build Date: 30 October 2011* 08:56:49PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
*** Before reporting problems, check http://wiki.x.org
*** to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
*** (++) from command line, (!!) notice, (II) informational,
*** (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 22 16:51:23 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.* Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |** |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
*** Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
*** Entry deleted from font path.
(==) FontPath set to:
*** /usr/share/fonts/X11/misc,
*** /usr/share/fonts/X11/100dpi/:unscaled,
*** /usr/share/fonts/X11/75dpi/:unscaled,
*** /usr/share/fonts/X11/Type1,
*** /usr/share/fonts/X11/100dpi,
*** /usr/share/fonts/X11/75dpi,
*** /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
*** built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
*** If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ecce0
(II) Module ABI versions:
*** X.Org ANSI C Emulation: 0.4
*** X.Org Video Driver: 6.0
*** X.Org XInput driver : 7.0
*** X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:3:0:0) 10de:0df8:10de:0835 nVidia Corporation rev 161, Mem @ 0xf6000000/16777216, 0xd8000000/134217728, 0xe0000000/33554432, I/O @ 0x0000dc80/128, BIOS @ 0x????????/524288
(--) PCI: (0:4:0:0) 10de:0df8:10de:0835 nVidia Corporation rev 161, Mem @ 0xf5000000/16777216, 0xe8000000/134217728, 0xe2000000/33554432, I/O @ 0x0000cc80/128, BIOS @ 0x????????/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 1.0.0
*** Module class: X.Org Server Extension
*** ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 1.0.0
*** Module class: X.Org Server Extension
*** ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 1.0.0
*** ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 1.13.0
*** Module class: X.Org Server Extension
*** ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 1.0.0
*** ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 1.1.0
*** ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched nouveau as autoconfigured driver 0
(==) Matched nv as autoconfigured driver 1
(==) Matched vesa as autoconfigured driver 2
(==) Matched fbdev as autoconfigured driver 3
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 0.0.15
*** Module class: X.Org Video Driver
*** ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 2.1.17
*** Module class: X.Org Video Driver
*** ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 2.3.0
*** Module class: X.Org Video Driver
*** ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
*** compiled for 1.7.6.901, module version = 0.4.2
*** ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU driver Date:** Tue Mar 16 13:08:37 2010 +1000
(II) NOUVEAU driver for NVIDIA chipset families :
*** RIVA TNT*** (NV04)
*** RIVA TNT2** (NV05)
*** GeForce 256 (NV10)
*** GeForce 2** (NV11, NV15)
*** GeForce 4MX (NV17, NV18)
*** GeForce 3** (NV20)
*** GeForce 4Ti (NV25, NV28)
*** GeForce FX* (NV3x)
*** GeForce 6** (NV4x)
*** GeForce 7** (G7x)
*** GeForce 8** (G8x)
(II) NOUVEAU driver Date:** Tue Mar 16 13:08:37 2010 +1000
(II) NOUVEAU driver for NVIDIA chipset families :
*** RIVA TNT*** (NV04)
*** RIVA TNT2** (NV05)
*** GeForce 256 (NV10)
*** GeForce 2** (NV11, NV15)
*** GeForce 4MX (NV17, NV18)
*** GeForce 3** (NV20)
*** GeForce 4Ti (NV25, NV28)
*** GeForce FX* (NV3x)
*** GeForce 6** (NV4x)
*** GeForce 7** (G7x)
*** GeForce 8** (G8x)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 03@00:00:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:03:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
(EE) [drm] failed to open device
(EE) VESA: Kernel modesetting driver in use, refusing to load
(WW) Falling back to old probe method for vesa
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 0.0.2
*** ABI class: X.Org Video Driver, version 6.0
(**) FBDEV(0): claimed PCI slot 3@0:0:0
(II) FBDEV(0): using default device
(II) FBDEV(0): Creating default Display subsection in Screen section
*** "Default Screen Section" for depth/fbbpp 24/32
(==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
(==) FBDEV(0): RGB weight 888
(==) FBDEV(0): Default visual is TrueColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): hardware: nouveaufb (video memory: 9000kB)
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 1920x1200 (pitch 1920)
(**) FBDEV(0):* Built-in mode "current"
(==) FBDEV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 1.0.0
*** ABI class: X.Org ANSI C Emulation, version 0.4
(**) FBDEV(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
*** compiled for 1.7.7, module version = 1.1.0
*** ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "nv"
(II) Unloading /usr/lib/xorg/modules/drivers/nv_drv.so
(==) Depth 24 pixmap format is 32 bpp
(==) FBDEV(0): Backing store disabled
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(==) FBDEV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
*** compiled for 1.7.6.901, module version = 2.3.2
*** Module class: X.Org XInput Driver
*** ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Dell Dell Multimedia Pro Keyboard (/dev/input/event5)
(**) Dell Dell Multimedia Pro Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Dell Dell Multimedia Pro Keyboard: always reports core events
(**) Dell Dell Multimedia Pro Keyboard: Device: "/dev/input/event5"
(II) Dell Dell Multimedia Pro Keyboard: Found keys
(II) Dell Dell Multimedia Pro Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell Multimedia Pro Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Dell Dell Multimedia Pro Keyboard (/dev/input/event6)
(**) Dell Dell Multimedia Pro Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Dell Dell Multimedia Pro Keyboard: always reports core events
(**) Dell Dell Multimedia Pro Keyboard: Device: "/dev/input/event6"
(II) Dell Dell Multimedia Pro Keyboard: Found absolute axes
(II) Dell Dell Multimedia Pro Keyboard: Found keys
(II) Dell Dell Multimedia Pro Keyboard: Configuring as mouse
(II) Dell Dell Multimedia Pro Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell Multimedia Pro Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) Dell Dell Multimedia Pro Keyboard: initialized for absolute axes.
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device DELL DELL USB Laser Mouse (/dev/input/event4)
(**) DELL DELL USB Laser Mouse: Applying InputClass "evdev pointer catchall"
(**) DELL DELL USB Laser Mouse: always reports core events
(**) DELL DELL USB Laser Mouse: Device: "/dev/input/event4"
(II) DELL DELL USB Laser Mouse: Found 12 mouse buttons
(II) DELL DELL USB Laser Mouse: Found scroll wheel(s)
(II) DELL DELL USB Laser Mouse: Found relative axes
(II) DELL DELL USB Laser Mouse: Found x and y relative axes
(II) DELL DELL USB Laser Mouse: Configuring as mouse
(**) DELL DELL USB Laser Mouse: YAxisMapping: buttons 4 and 5
(**) DELL DELL USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "DELL DELL USB Laser Mouse" (type: MOUSE)
(II) DELL DELL USB Laser Mouse: initialized for relative axes.
(II) config/udev: Adding input device DELL DELL USB Laser Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event3)
(**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
(**) Dell WMI hotkeys: always reports core events
(**) Dell WMI hotkeys: Device: "/dev/input/event3"
(II) Dell WMI hotkeys: Found keys
(II) Dell WMI hotkeys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Dell Dell Multimedia Pro Keyboard: Device reopened after 1 attempts.
(II) Dell Dell Multimedia Pro Keyboard: Device reopened after 1 attempts.
(II) DELL DELL USB Laser Mouse: Device reopened after 1 attempts.
(II) Dell WMI hotkeys: Device reopened after 1 attempts.



--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: BAY160-W578548E2D1B5FD641E91F0ADBF0@phx.gbl">http://lists.debian.org/BAY160-W578548E2D1B5FD641E91F0ADBF0@phx.gbl

Bob Proulx 08-22-2012 10:28 PM

Dual-Monitor help
 
Nelson Green wrote:
> I have a Dell Precision T5500 with dual video cards, and I would
> like to have one large screen spread across the two monitors.

I usually do this with a single graphics card. So my suggestion might
not be useful to you. But...

> I am not sure where to start. One thing I have tried to do is to see
> what xrandr gives me, and I don't completely understand the output
> of that. I have included that output, and a copy of Xorg.0.log
> below.
>
> At this point I would welcome any suggestions as to what to try next.

I would start with lxrandr. Because even me being a staunch CLI
advocate it is sometimes easier to click the mouse. This is simply an
graphical interface to xrandr.

# apt-get install lxrandr

$ lxrandr

It also installs a menu for it under Applications/System/Monitoring
as LXRandR too so you can menu pick it instead of typing it. Then see
if it allows you to turn on and set up both monitors.

Then for batch mode automated startup I have the following in my X11
startup file.

if xrandr --query | grep -q HDMI2; then
xrandr --auto --output HDMI2 --right-of HDMI1
fi

Initially both of my monitors have the same display. Setting the
above command sets my second monitor to the right of my first monitor
and then they display one unified display.

Again, I am using a single graphics card with dual outputs. YMMV.

Bob

Nelson Green 08-23-2012 08:14 PM

Dual-Monitor help
 
> Nelson Green wrote:
> > I have a Dell Precision T5500 with dual video cards, and I would
> > like to have one large screen spread across the two monitors.
>
> I usually do this with a single graphics card. So my suggestion might
> not be useful to you. But...
>
> > I am not sure where to start. One thing I have tried to do is to see
> > what xrandr gives me, and I don't completely understand the output
> > of that. I have included that output, and a copy of Xorg.0.log
> > below.
> >
> > At this point I would welcome any suggestions as to what to try next.
>
> I would start with lxrandr. Because even me being a staunch CLI
> advocate it is sometimes easier to click the mouse. This is simply an
> graphical interface to xrandr.
>
> # apt-get install lxrandr
>
> $ lxrandr

Unfortunately, lxrandr only shows the single monitor. Another issue I
have is nothing from xrandr nor lxrandr shows an output interface. If
I could get that information I might at least have a place to start. As it
is, the only indications that the two cards are even known to the system
are the Xorg log, and the output of dmesg. Other than that nothing
seems to be aware of the second video card and/or monitor.

BTW, I also realized I forgot to mention that I am using the Xfce
Desktop. I doubt that makes any difference, but figured I should at
least mention it for completeness.

I appreciate the reply.
Patrick


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: BAY160-W4A7DCC96B762F50393914ADBE0@phx.gbl">http://lists.debian.org/BAY160-W4A7DCC96B762F50393914ADBE0@phx.gbl

Shane Johnson 08-23-2012 08:32 PM

Dual-Monitor help
 
Nelson,Did you install the driver package? *Either xserver-xorg-video-nouveau or xserver-xorg-video-nvidia (open and closed driver*respectively) from apt or download and installed from Nvidia's site?

Shane

On Thu, Aug 23, 2012 at 2:14 PM, Nelson Green <nelsongreen84@hotmail.com> wrote:



> Nelson Green wrote:

> > I have a Dell Precision T5500 with dual video cards, and I would

> > like to have one large screen spread across the two monitors.

>

> I usually do this with a single graphics card. *So my suggestion might

> not be useful to you. *But...

>

> > I am not sure where to start. One thing I have tried to do is to see

> > what xrandr gives me, and I don't completely understand the output

> > of that. I have included that output, and a copy of Xorg.0.log

> > below.

> >

> > At this point I would welcome any suggestions as to what to try next.

>

> I would start with lxrandr. *Because even me being a staunch CLI

> advocate it is sometimes easier to click the mouse. *This is simply an

> graphical interface to xrandr.

>

> * # apt-get install lxrandr

>

> * $ lxrandr



Unfortunately, lxrandr only shows the single monitor. Another issue I

have is nothing from xrandr nor lxrandr shows an output interface. If

I could get that information I might at least have a place to start. As it

is, the only indications that the two cards are even known to the system

are the Xorg log, and the output of dmesg. Other than that nothing

seems to be aware of the second video card and/or monitor.



BTW, I also realized I forgot to mention that I am using the Xfce

Desktop. I doubt that makes any difference, but figured I should at

least mention it for completeness.



I appreciate the reply.

Patrick





--

To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org

with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Archive: http://lists.debian.org/BAY160-W4A7DCC96B762F50393914ADBE0@phx.gbl





--
Shane D. JohnsonIT AdministratorRasmussen Equipment

Nelson Green 08-23-2012 09:24 PM

Dual-Monitor help
 
________________________________
> Date: Thu, 23 Aug 2012 14:32:59 -0600
> Subject: Re: Dual-Monitor help
> From: sdj@rasmussenequipment.com
> To: nelsongreen84@hotmail.com
> CC: bob@proulx.com; debian-user@lists.debian.org
>
> Nelson,
> Did you install the driver package? Either xserver-xorg-video-nouveau
> or xserver-xorg-video-nvidia (open and closed driver respectively) from
> apt or download and installed from Nvidia's site?
>
> Shane

I sure did:
$ dpkg -l | grep nouveau | cut -d " " -f 3
libdrm-nouveau1
xserver-xorg-video-nouveau

>
> On Thu, Aug 23, 2012 at 2:14 PM, Nelson Green
> <nelsongreen84@hotmail.com<mailto:nelsongreen84@ho tmail.com>> wrote:
>
> > Nelson Green wrote:
> > > I have a Dell Precision T5500 with dual video cards, and I would
> > > like to have one large screen spread across the two monitors.
> >
> > I usually do this with a single graphics card. So my suggestion might
> > not be useful to you. But...
> >
> > > I am not sure where to start. One thing I have tried to do is to see
> > > what xrandr gives me, and I don't completely understand the output
> > > of that. I have included that output, and a copy of Xorg.0.log
> > > below.
> > >
> > > At this point I would welcome any suggestions as to what to try next.
> >
> > I would start with lxrandr. Because even me being a staunch CLI
> > advocate it is sometimes easier to click the mouse. This is simply an
> > graphical interface to xrandr.
> >
> > # apt-get install lxrandr
> >
> > $ lxrandr
>
> Unfortunately, lxrandr only shows the single monitor. Another issue I
> have is nothing from xrandr nor lxrandr shows an output interface. If
> I could get that information I might at least have a place to start. As it
> is, the only indications that the two cards are even known to the system
> are the Xorg log, and the output of dmesg. Other than that nothing
> seems to be aware of the second video card and/or monitor.
>
> BTW, I also realized I forgot to mention that I am using the Xfce
> Desktop. I doubt that makes any difference, but figured I should at
> least mention it for completeness.
>
> I appreciate the reply.
> Patrick
>
>
> --
> To UNSUBSCRIBE, email to
> debian-user-REQUEST@lists.debian.org<mailto:debian-user-REQUEST@lists.debian.org>
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org<mailto:listmaster@list s.debian.org>
> Archive:
> http://lists.debian.org/BAY160-W4A7DCC96B762F50393914ADBE0@phx.gbl<http://lists.debian.org/BAY160-W4A7DCC96B762F50393914ADBE0%40phx.gbl>
>
>
>
>
> --
> Shane D. Johnson
> IT Administrator
> Rasmussen Equipment
>
>


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: BAY160-W6446BA1663AAA9AC0CDE5DADBE0@phx.gbl">http://lists.debian.org/BAY160-W6446BA1663AAA9AC0CDE5DADBE0@phx.gbl

Nelson Green 08-23-2012 09:41 PM

Dual-Monitor help
 
> > Nelson,
> > Did you install the driver package? Either xserver-xorg-video-nouveau
> > or xserver-xorg-video-nvidia (open and closed driver respectively) from
> > apt or download and installed from Nvidia's site?
> >
> > Shane
>
> I sure did:
> $ dpkg -l | grep nouveau | cut -d " " -f 3
> libdrm-nouveau1
> xserver-xorg-video-nouveau

Oops, forgot to include:
$ lsmod | grep nouveau
nouveau************** 581600* 2
ttm******************* 48312* 1 nouveau
drm_kms_helper******** 22707* 1 nouveau
drm****************** 160013* 3 nouveau,ttm,drm_kms_helper
i2c_algo_bit********** 12713* 1 nouveau
mxm_wmi*************** 12433* 1 nouveau
video***************** 17415* 1 nouveau
i2c_core************** 19218* 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
button**************** 12817* 1 nouveau
wmi******************* 13051* 3 nouveau,mxm_wmi,dell_wmi

>
> >
> > On Thu, Aug 23, 2012 at 2:14 PM, Nelson Green
> > <nelsongreen84@hotmail.com<mailto:nelsongreen84@ho tmail.com>> wrote:
> >
> > > Nelson Green wrote:
> > > > I have a Dell Precision T5500 with dual video cards, and I would
> > > > like to have one large screen spread across the two monitors.
> > >
> > > I usually do this with a single graphics card. So my suggestion might
> > > not be useful to you. But...
> > >
> > > > I am not sure where to start. One thing I have tried to do is to see
> > > > what xrandr gives me, and I don't completely understand the output
> > > > of that. I have included that output, and a copy of Xorg.0.log
> > > > below.
> > > >
> > > > At this point I would welcome any suggestions as to what to try next.
> > >
> > > I would start with lxrandr. Because even me being a staunch CLI
> > > advocate it is sometimes easier to click the mouse. This is simply an
> > > graphical interface to xrandr.
> > >
> > > # apt-get install lxrandr
> > >
> > > $ lxrandr
> >
> > Unfortunately, lxrandr only shows the single monitor. Another issue I
> > have is nothing from xrandr nor lxrandr shows an output interface. If
> > I could get that information I might at least have a place to start. As it
> > is, the only indications that the two cards are even known to the system
> > are the Xorg log, and the output of dmesg. Other than that nothing
> > seems to be aware of the second video card and/or monitor.
> >
> > BTW, I also realized I forgot to mention that I am using the Xfce
> > Desktop. I doubt that makes any difference, but figured I should at
> > least mention it for completeness.
> >
> > I appreciate the reply.
> > Patrick
> >
> >
> > --
> > To UNSUBSCRIBE, email to
> > debian-user-REQUEST@lists.debian.org<mailto:debian-user-REQUEST@lists.debian.org>
> > with a subject of "unsubscribe". Trouble? Contact
> > listmaster@lists.debian.org<mailto:listmaster@list s.debian.org>
> > Archive:
> > http://lists.debian.org/BAY160-W4A7DCC96B762F50393914ADBE0@phx.gbl<http://lists.debian.org/BAY160-W4A7DCC96B762F50393914ADBE0%40phx.gbl>
> >
> >
> >
> >
> > --
> > Shane D. Johnson
> > IT Administrator
> > Rasmussen Equipment
> >
> >
>
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> Archive: http://lists.debian.org/BAY160-W6446BA1663AAA9AC0CDE5DADBE0@phx.gbl
>


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: BAY160-W536E31AE6DDA4C125B37DDADBE0@phx.gbl">http://lists.debian.org/BAY160-W536E31AE6DDA4C125B37DDADBE0@phx.gbl

Shane Johnson 08-23-2012 10:47 PM

Dual-Monitor help
 
On Thu, Aug 23, 2012 at 3:41 PM, Nelson Green <nelsongreen84@hotmail.com> wrote:





> > Nelson,

> > Did you install the driver package? Either xserver-xorg-video-nouveau

> > or xserver-xorg-video-nvidia (open and closed driver respectively) from

> > apt or download and installed from Nvidia's site?

> >

> > Shane

>

> I sure did:

> $ dpkg -l | grep nouveau | cut -d " " -f 3

> libdrm-nouveau1

> xserver-xorg-video-nouveau



Oops, forgot to include:

$ lsmod | grep nouveau

nouveau************** 581600* 2

ttm******************* 48312* 1 nouveau

drm_kms_helper******** 22707* 1 nouveau

drm****************** 160013* 3 nouveau,ttm,drm_kms_helper

i2c_algo_bit********** 12713* 1 nouveau

mxm_wmi*************** 12433* 1 nouveau

video***************** 17415* 1 nouveau

i2c_core************** 19218* 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801

button**************** 12817* 1 nouveau

wmi******************* 13051* 3 nouveau,mxm_wmi,dell_wmi



>

> >

> > On Thu, Aug 23, 2012 at 2:14 PM, Nelson Green

> > <nelsongreen84@hotmail.com<mailto:nelsongreen84@ho tmail.com>> wrote:

> >

> > > Nelson Green wrote:

> > > > I have a Dell Precision T5500 with dual video cards, and I would

> > > > like to have one large screen spread across the two monitors.

> > >

> > > I usually do this with a single graphics card. So my suggestion might

> > > not be useful to you. But...

> > >

> > > > I am not sure where to start. One thing I have tried to do is to see

> > > > what xrandr gives me, and I don't completely understand the output

> > > > of that. I have included that output, and a copy of Xorg.0.log

> > > > below.

> > > >

> > > > At this point I would welcome any suggestions as to what to try next.

> > >

> > > I would start with lxrandr. Because even me being a staunch CLI

> > > advocate it is sometimes easier to click the mouse. This is simply an

> > > graphical interface to xrandr.

> > >

> > > # apt-get install lxrandr

> > >

> > > $ lxrandr

> >

> > Unfortunately, lxrandr only shows the single monitor. Another issue I

> > have is nothing from xrandr nor lxrandr shows an output interface. If

> > I could get that information I might at least have a place to start. As it

> > is, the only indications that the two cards are even known to the system

> > are the Xorg log, and the output of dmesg. Other than that nothing

> > seems to be aware of the second video card and/or monitor.

> >

> > BTW, I also realized I forgot to mention that I am using the Xfce

> > Desktop. I doubt that makes any difference, but figured I should at

> > least mention it for completeness.

> >

> > I appreciate the reply.

> > Patrick

> >

> >

> > --

> > To UNSUBSCRIBE, email to

> > debian-user-REQUEST@lists.debian.org<mailto:debian-user-REQUEST@lists.debian.org>

> > with a subject of "unsubscribe". Trouble? Contact

> > listmaster@lists.debian.org<mailto:listmaster@list s.debian.org>

> > Archive:

> > http://lists.debian.org/BAY160-W4A7DCC96B762F50393914ADBE0@phx.gbl<http://lists.debian.org/BAY160-W4A7DCC96B762F50393914ADBE0%40phx.gbl>


> >

> >

> >

> >

> > --

> > Shane D. Johnson

> > IT Administrator

> > Rasmussen Equipment

> >

> >

>

>

> --

> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org

> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

> Archive: http://lists.debian.org/BAY160-W6446BA1663AAA9AC0CDE5DADBE0@phx.gbl

>

* * * * * * * * * * * * * * * * * * * * *
Nelson,Do you have a xorg.conf file or do you let X sort it all out itself? *I noticed from your xrandr posting, that only one resolution is *defined so maybe it's hard coded. *I run without a conf file X seems to pull everything correctly for my hardware. *I am still kinda green at this myself, just trying to help with some ideas. *

Thanks
--
Shane D. JohnsonIT AdministratorRasmussen Equipment

Greg Madden 08-24-2012 02:27 AM

Dual-Monitor help
 
On Thursday 23 August 2012 1:41:37 pm Nelson Green wrote:
> > > Nelson,
> > > Did you install the driver package? Either xserver-xorg-video-nouveau
> > > or xserver-xorg-video-nvidia (open and closed driver respectively) from
> > > apt or download and installed from Nvidia's site?
> > >
> > > Shane
> >
> > I sure did:
> > $ dpkg -l | grep nouveau | cut -d " " -f 3
> > libdrm-nouveau1
> > xserver-xorg-video-nouveau
>
> Oops, forgot to include:
> $ lsmod | grep nouveau
> nouveau************** 581600* 2
> ttm******************* 48312* 1 nouveau
> drm_kms_helper******** 22707* 1 nouveau
> drm****************** 160013* 3 nouveau,ttm,drm_kms_helper
> i2c_algo_bit********** 12713* 1 nouveau
> mxm_wmi*************** 12433* 1 nouveau
> video***************** 17415* 1 nouveau
> i2c_core************** 19218* 5
> nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801 button****************
> 12817* 1 nouveau
> wmi******************* 13051* 3 nouveau,mxm_wmi,dell_wmi
>
> > > On Thu, Aug 23, 2012 at 2:14 PM, Nelson Green
> > >
> > > <nelsongreen84@hotmail.com<mailto:nelsongreen84@ho tmail.com>> wrote:
> > > > Nelson Green wrote:
> > > > > I have a Dell Precision T5500 with dual video cards, and I would
> > > > > like to have one large screen spread across the two monitors.
> > > >
> > > > I usually do this with a single graphics card. So my suggestion might
> > > > not be useful to you. But...
> > > >
> > > > > I am not sure where to start. One thing I have tried to do is to
> > > > > see what xrandr gives me, and I don't completely understand the
> > > > > output of that. I have included that output, and a copy of
> > > > > Xorg.0.log below.
> > > > >
> > > > > At this point I would welcome any suggestions as to what to try
> > > > > next.
> > > >
> > > > I would start with lxrandr. Because even me being a staunch CLI
> > > > advocate it is sometimes easier to click the mouse. This is simply an
> > > > graphical interface to xrandr.
> > > >
> > > > # apt-get install lxrandr
> > > >
> > > > $ lxrandr
> > >
> > > Unfortunately, lxrandr only shows the single monitor. Another issue I
> > > have is nothing from xrandr nor lxrandr shows an output interface. If
> > > I could get that information I might at least have a place to start. As
> > > it is, the only indications that the two cards are even known to the
> > > system are the Xorg log, and the output of dmesg. Other than that
> > > nothing seems to be aware of the second video card and/or monitor.
> > >
> > > BTW, I also realized I forgot to mention that I am using the Xfce
> > > Desktop. I doubt that makes any difference, but figured I should at
> > > least mention it for completeness.
> > >
> > > I appreciate the reply.
> > > Patrick

It is possible that the 'nouveau' driver doesn't do dual monitors with the Quadro
600 cards. i am not to good with these things, looks like it tries 'nouveau,
vesa & FB, and fails. ,

I do run a Quadro dual port card, I use the 'nvidia' driver, the xorg drivers do
not work with my setup. The Nvidia driver comes with a monitor setup app, works
here.


--
Peace,

Greg


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201208231827.09358.gomadtroll@gci.net">http://lists.debian.org/201208231827.09358.gomadtroll@gci.net

Nelson Green 08-24-2012 01:52 PM

Dual-Monitor help
 
> Nelson,
> Do you have a xorg.conf file or do you let X sort it all out itself? I
> noticed from your xrandr posting, that only one resolution is defined
> so maybe it's hard coded. I run without a conf file X seems to pull
> everything correctly for my hardware. I am still kinda green at this
> myself, just trying to help with some ideas.
>
> Thanks
>
> --
> Shane D. Johnson
> IT Administrator
> Rasmussen Equipment

Hi Shane,

No, I do not have an xorg.conf file. In fact I am curious to know how
not having that file works, if anyone would care to point me to a
source of info on that. I'm used to having a configuration file for
almost everything.

In the meantime I may just see if I can find a different set of video
cards, or a dual port card that are/is supported. What are the chances
of finding a list of supported configurations/hardware?

Thanks,
Nelson


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: BAY160-W61294D5997AB9E34360354ADBD0@phx.gbl">http://lists.debian.org/BAY160-W61294D5997AB9E34360354ADBD0@phx.gbl

Nelson Green 08-24-2012 01:55 PM

Dual-Monitor help
 
> It is possible that the 'nouveau' driver doesn't do dual monitors with the Quadro
> 600 cards. i am not to good with these things, looks like it tries 'nouveau,
> vesa & FB, and fails. ,
>
> I do run a Quadro dual port card, I use the 'nvidia' driver, the xorg drivers do
> not work with my setup. The Nvidia driver comes with a monitor setup app, works
> here.
>
>
> --
> Peace,
>
> Greg

Greg, that thought did cross my mind. In fact, I may just see if I can find a
different set of video cards, or a dual port card that are/is supported.



Thanks,

Nelson

--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: BAY160-W21851C06F1AAF33CFF402DADBD0@phx.gbl">http://lists.debian.org/BAY160-W21851C06F1AAF33CFF402DADBD0@phx.gbl


All times are GMT. The time now is 05:00 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.